Used Ng 200 for sale (143,873)

Year of construction: 1998, condition: ready for operation (used), Two injection molding machines are available. 1) Battenfeld BA 2700/1200 BK, year of manufacture: 1998, clamping force: 2700kN, platen dimensions X/Y: 900mm/1020mm, tie bar distance X/Y: 630mm/630mm, opening stroke: 550mm, mold height min./max.: 250mm/620mm, max. platen distance: 1170mm, ejector stroke: 160mm. Screw diameter: 55mm, L/D ratio: 22, injection pressure: 1305bar, stroke volume: 913cm³, injection weight: 830g. Machine dimensions X/Y/Z: approx. 6800mm/1900mm/3400mm, weight: approx. 12000kg, control: Unilog 4000, operating hours: approx. 40759h. The machine exhibits faults when switching over. 2) Engel ES 200/45 HLS, year of construction: 1998, clamping force: 45t, platen dimensions X/Y: 550mm/430mm, min. installation height: 180mm, platen distance: 530mm, opening stroke: 350mm, ejector stroke: 100mm. Screw diameter: 25mm, stroke volume: 99cm³, injection pressure: 1400bar, L/D ratio: 20, screw stroke: 140mm. Machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 3300kg, operating hours: 74165h. The machine has slight leaks in the hydraulics. Documentation available. On-site inspection is possible. Individual sale possible. Ledpfov Sufasx Ag Noah

Condition: new, Year of construction: 2025, Extraction capacity approx. 6500 m3/h Motor power 5.5 kW Speed ​​3000 rpm Rated voltage 400 V, 50 Hz Extraction nozzle 280/200 mm Extraction speed 28 m/sec. Ledpfx Asv Dtl Asg Noah Number of filters 37 Negative pressure 3000Pa Filter category G Polyester filter material Noise level 80 dB without connection / 65 dB when connected to the machine via the pipe Filter area 17.1 m2 Dimensions (L x W x H) 2080 x 920 x 2100 mm Weight 248 kg

Condition: used, Year of construction: 1980, pressure 200 t chamfer lenght 3000 mm distance between columns 2560 mm dayligth 450 mm throat 450 mm adjustment of stroke 240 mm horn length over column outer edge each 175 mm table length 3050 mm table width 280 mm table height over floor 820 mm electrics - voltage/frequency 220/50 V/Hz control CYBELEC, DNC60 stroke 250 mm operating pressure 150 bar weight of the machine ca. 15 t dimensions of the machine ca. L:4,0 x B:3,2 x H:3,44 m Lajdpfxet Hllps Ag Noh • hydraulical press brake, • new control CYBELEC DNC 60 • lower part of the machine moves down 500 mm to the floor, • at the moment the machine is mounted on a double-T-support; • prism and upper part of the machine in 3000 mm length

Condition: good (used), Year of construction: 1992, Closing force 500 KN Screw diameter 30 mm Lodpfxjvygh Nj Ag Noah Weight 3,200 KG

Condition: good (used), Year of construction: 1977, functionality: fully functional, throat depth: 440 mm, ram adjustment: 110 mm, total height: 18,200 mm, table width: 800 mm, table length: 1,100 mm, total width: 24,000 mm, total length: 37,200 mm, overall weight: 12,600 kg, pressing force: 200 t, distance table to ram: 400 mm, power: 15 kW (20.39 HP), ram stroke: 40-180 mm Ljdpfxjtu Hvwe Ag Neah incl. Helmerding feed, 400 mm x 4 mm Strokes: 40 + 60 1/min Distance table/ram - adjustment top/stroke bottom: 400 mm Table opening: 450 mm diameter

Condition: excellent (used), Year of construction: 2008, operating hours: 58,000 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 25 mm, displacement volume: 59 cm³, injection pressure: 20 bar, mold height (min.): 250 mm, ejector force: 25 N, ejector stroke: 100 mm, overall weight: 3,900 kg, Dear customers, Laedpjt A Ufwefx Ag Neh We have excellent cleanroom machines back in our portfolio. Here we offer this Engel e Max cleanroom machine from 2008. The machine is equipped with a GEKU SR 500 ST linear robot. The machine has run just under 58,000 pump hours in automatic mode. It comes from a reputable manufacturer in the pharmaceutical sector and, including its handling equipment, has always been subject to strict maintenance management and is in excellent condition for its age. Even paintwork damage is hardly present. I would be happy to provide you with further information and prepare an offer for you. I look forward to your inquiry. Best regards, Nick Schönfeld Maschinen minus Handel punkt EU

Year of construction: 2019, condition: ready for operation (used), Screw diameter: 30mm, clamping force: 50t, heating output: 11kW, weight: 2.9t, with documentation, an inspection is possible. Lasdpjrk Rxqjfx Ag Nsh

Condition: new, Year of construction: 2025, Technical specifications: • Conforms to H-2 standard • Extraction capacity - ~ 6500 m3/h • Motor power - 5.5 kW • Speed - 3000 rpm • Voltage - 400V, 50Hz • Suction connection - 280/200 mm • Filter area - 22 m2 • Speed - 28m/sec. • Number of filters - 35 • Dimensions - 921 x 1982 x 2271 mm • Weight - 350 kg • Category of filters - G Lajdpfxod H Rfae Ag Neh • Filter material - polyester • Noise - 80 dB without connection, 65 dB when connected to the machine via a pipe Delivery: - Fulfill H-2 Norms - 5 micron polyester filter - 2 containers - Running gear - Filter cleaning using a controlled vibration system + 850 euros for the models with fire extinguisher (Safe System) + 1000 euros for the models with inverter (speed control)

Condition: good (used), bench vice, metalworker's vice, parallel vice -Jaw width: 150 mm -Wingspan: 200 mm -Number: 2x vices available Lasdpfx Agjddfh Eo Neh -Price: per piece -Dimensions: 490/340/H195 mm -Weight: 27 kg

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 618 cm³, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, Engel VC 1350/200 Tech Clamping force: 200 t Year: 2007 Injection weight: 562 g Injection unit: .../1350 Screw diameter: 55 mm Specific injection pressure: 2183 bar Injection volume: 618 ccm Injection weight: 562 g Mould clamping system: 200/... Clamping force: 200 t Mould platen dimensions: 860 x 570 mm Mould height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1150 mm Ejector stroke: 180 mm General data: Control system: CC200 Lodoxan Exjpfx Ag Njah Equipment: - Pneumatic valve - 2 x hydraulic core - Robot - 8 hot runner zones - 8-section rotameter

Year of construction: 2004, condition: used, z-travel 200 mm clamping diameter of cutter heads max. 550 mm max. permissible cutter head weight 150 kg mounting plaute diameter for cutter heads 360 mm taper for cutter heads, nominal diameter 500 mm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m Cutter Head Set-Up- and -Measuring Machine In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in dry milling, high gear cutting quality and a long service life can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and Lajdpfx Agsvq Sd Rj Noh easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: excellent (used), Year of construction: 2007, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 200/28 TECH Baujahr: 2007 Schließkraft: 28 Tonnen Lajdsu Eu Tnspfx Ag Noh Holmabstand: HOLMLOS Schnecken DN: 25 mm Max. Hubvolumen: 49 ccm³ Spritzteilgewicht 44 g/PS Steuerung: CC200 Ausstattung: - 1 x Kernzug

Year of construction: 2014, condition: ready for operation (used), A two-component injection moulding machine Engel with piggyback configuration, including Engel Viper 40 robot and safety enclosure, is available. Clamping force: 1800kN, nozzle diameter: 35mm, min. mould installation height: 270mm, max. platen distance: 1020mm, tie bar spacing: 980mm, centering: 180mm. Screw diameter 1/2: 22mm/15mm, injection pressure 1/2: 2392bar/2203bar, injection weight 1/2: 66g/19.5g. Robot year of manufacture: 2014, robot travel X/Y/Z: 700mm/1300mm/2360mm. Machine dimensions X/Y: approx. 6700mm/2100mm, control: CC400, operating hours: approx. 38567h. The 22mm screw needs to be replaced. Without conveyor belt. Documentation available. An on-site inspection is possible. Lodpfx Aew Hth Ieg Nsah

Condition: good (used), Horizon Digital Printing Booklet Line The machine consists of the following modules: HOF-400 + CF-400 + CR-400 + AC-400+ SPF-200L + FC-200L The machine is in perfect condition, ready for production. Mileage of only 0.5 million booklets. This is one of the latest models of Horizon machines. Setting the entire machine from the desktop. Production Japan. The ideal machine for efficient production of booklets in a digital printing house. The line consists of: – Horizon HOF-400 sheet feeder – Horizon CF-400 cover feeder – Horizon CR-400 creasing machine with top/bottom trimmer – Horizon AC-400 accumulation module – Horizon SPF-200L sewing and folding unit – Horizon FC-200L front trimmer Laedpfxjwt Stie Ag Nsh – LC-200L delivery Horizon HOF-400 – Speed: Up to 45,000 sheets per hour – Maximum stack height: Sheet feeder: 620 mm; Cover feeder: 200 mm – Minimum sheet dimensions: 203 x 203 mm Horizon SPF-200L Touchscreen, colour display with a diagonal of 10.4” Non-stop work thanks to the function of ejecting incorrectly collected sets Max format: max. 356 x 610 mm; Min format. 120 x 180 mm Max speed 4500 booklets/h Weight 500 kg wire sewing folding two Hohner 43/6 s heads (max.4) Ability to save up to 200 jobs to the machine’s memory. The machine has a block sewing module. Horizon FC-200L Cutting thickness 4-5 mm power supply 230 V Weight 244 kg Touchscreen panel for quick change of formats. With one click we retool the machine to other format. The machine comes with: LC-200 delivery, tools, spare parts, documentation.

Condition: good (used), Year of construction: 2010, clamping force: 500 kN, Engel victory 200/50 spex (2010) CC200 Clamping force: 50 t Screw diameter: 35 mm Type: Horizontal Drive: Hydraulic Lodpfxswv Ukis Ag Noah Hours: 56000

Year of construction: 2024, condition: new, functionality: fully functional, Technical description: The system is designed for weighing standard cars. The loading trolley (200 or 300 litres) is pushed into the system. The free stroke and the weighing process are triggered by a button. The free stroke is carried out via motor drive. In connection with the bending rod weighing cell and the weighing terminal, the weight can be read in the display and passed on to the existing DMS or ERP system. If necessary, the recipe scale can be equipped with casters as a mobile version. The system can be equipped with all common weighing terminals. • Stainless steel base frame in hygienic design • 1 drive unit Lajdpfx Agsttv Dfe Njh • Button • Shafts, bearings • Height-adjustable feet (alternatively mobile version) • CEE plug

Condition: excellent (used), LAMINATING LINE, also for panels with ‘J’, ‘U’, ‘L’ profile and 45° angles. Minimum/maximum panel dimensions: mm 260-1300 (width) x mm 1850-4250 (length) Coating: decorative paper > 40 g/m2 - 120 g/m2 or PP, PET, PVC Lodpfowd Tcajx Ag Nsah PUR glue (with NORDSON premelter) Consisting of: 01) "ESSEDUE" double station bridge Loader 02)"‘BUFTERING" caibrating-sanding machine Mod. SWT 955 03) Motorised roller conveyor ‘HOMAG’ Mod. TVL 100 04) Cleaning-sweeping machine ‘WANDRES’. 05) Gluing system with 2 pre-melters ‘NORDSON’ for PU glue 06) Machine ‘HOMAG’ Mod. KFK 200 with: - Double glue spreader - Coil unwinder - Calender (rollers press) - Side folding and pressing zone for excess material - Panel side trimming zone 07) Cross Cut machine "HOMAG" 08) "ESSEDUE" double station bridge Unloader

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, total height: 2,398 mm, total width: 1,690 mm, total length: 1,900 mm, quill stroke: 300 mm, workpiece length (max.): 790 mm, workpiece width (max.): 530 mm, workpiece height (max.): 275 mm, overall weight: 2,800 kg, tank capacity: 410 l, GF Machining Solutions FORM 200 Built in 2015 - Only 7,200 EDM hours! C-shaped die-sinking EDM machine Laedpswi Iuusfx Ag Noh Fixed table with lowerable tank Travel paths (X/Y/Z): 350 x 250 x 300 mm Maximum workpiece dimensions: 790 x 530 x 275 mm Maximum workpiece weight: 500 kg Programmable bath height: 100-325 mm Including pneumatic chuck Erowa ITS 50 / 3R Systems / Hirschmann (optional) Max. electrode weight: 50 kg Max. inertia: 2000 kgcm² 4-position electrode changer AC FORM HMI user interface Operation via 15" LCD color screen with touchscreen Keyboard and handheld control unit also available Machine dimensions: 1900 x 1690 x 2398 mm Total weight: 2800 kg kg We will clean and service the machine upon receipt of the order. This is followed by an erosion test. We would be happy to commission the machine at your location and provide operating instructions. Optional: - Transport - Cooling unit - Dielectric - Clamping device

Condition: refurbished (used), Year of construction: 2015, Bungartz UMOS 3624AD/250/200-GS - Delivery rate 270 m³/h - delivery head 32m - Speed 1450 1/min - Year of manufacture 2015 - goods for shipment Lajdpfophmkzjx Ag Nsh - delivery possible against surcharge

Year of construction: 2012, condition: good (used), robot 40 RC 200 X= 700mm Y= tandem 1600mm Z= 3320mm B + C Servo Lodpfx Aogkvtxeg Neah year: 2012 price: 8.900€ contact person: Mr. Rainer Eckerle

Condition: used, Year of construction: 2013, 1. Clamping Force: 60 tons (600 kN) Ljdpfowp E Hzox Ag Noah 2. Injection Unit Orientation: Vertical 3. Rotary Table: Included 4. Screw Diameter: 25 mm 5. Shot Size: Around 4.4 oz (125 g) 6. Injection Pressure: Up to 210 bar 7. Injection Speed: Approximately 139 mm/s 8. Mould Opening Stroke: 305 mm 9. Ejector Stroke: 106 mm

Condition: excellent (used), Year of construction: 2007, Engel VC 200/40 TECH injection molding machine Year of production - 2007 Control - CC 200 Laodpfx Agowa S Uas Neh Closing unit: Closing force [kN] - 400 Clamping plate dimensions (hxv) [mm] -550 x 430 Min./max. mold height [mm] min -180 Maximum opening width [mm]- 530 Injection unit Screw diameter [mm] -30 Injection volume [cm3]- 99 Injection pressure [bar]- 1451 Electric-hydraulic equipment Pump motor rated power [kW] 15 Dimensions and weight: Net weight with control cabinet [t]- 2.7 Dimensions (length x width x height) [m] -3.26m x 1.2m x 1.8m

Condition: new, *TECHNICAL SPECIFICATION: Ljdpfjg Ey Ufsx Ag Noah Heating power hot circuit: 48 kW heating capacity cold circuit: 12 kW cooling capacity hot circuit: 42 kW cooling capacity cold circuit: 270 kW medium: water up to 200°C Max. external volume: 10 ltr at 200°C Max. flow rate: up to 200 l/min  max. delivery pressure: up to 6,5 bar motor power: 5,5 kW Dimension LxWxH: 1.395 x 753 x 1.180 mm Weight approx. 580 kg *HIGHLIGHTS EQUIPMENT: -regulation and control via SPS with touch screen -heating via stainless steel tubular heating elements made of Incolloy -Heating control via solid-state relay -control box IP54 externally ventilated2 -electrical wiring on terminal blocks -pot. free input for signal for cold/warm changeover (front door) - Pot.-free contact for collective alarm on 3-pin plug-in connector (front door) (front door) -temperature control unit with heating and cooling circuit, for connection of a valve station for quick changeover between hot and cold circuit -temperature controlled feed of the return water -level monitoring with automatic level compensation -dirt filter in the cooling water supply and in the return of the circulation system -Separate automatic filling with strainer -Flow measurement in differential pressure principle in both circuits -monitoring of the heating rod surface by temperature sensors -System pressure control, necessary compressed air connection: 6 to 8 bar -booster pump type DS 360 for water make-up -corrosion-resistant components (VA, MS) -unit mounted on rollers and ready for connection *OPTIONS: -System EcoTemp for intermittent operation -connection for ext temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This device is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Year of construction: 2013, condition: good (used), robot Engel Viper 20 RC 200 X= 700mm Y= tandem 1500mm Z= 2840mm B + C Servo year: 2013 price: 7.500€ contact person: Mr. Rainer Eckerle Laedpshqmpxjfx Ag Neh

Year of construction: 2012, condition: good (used), robot Engel Viper 20 RC 200 X= 700mm Y= tandem 1500mm Z= 2840mm B + C Servo year: 2012 price: 9.400€ Laodpfogpwgaex Ag Noh contact : Mr. Rainer Eckerle