Used Notebook Machine for sale (91,670)

Condition: excellent (used), Year of construction: 2014, XYZ 1020 Vertical Machining Centre Siemens 828D Control Manufactured & Installed in 2012 24 Station Too Carousel 8k Spindle Machine Capacity: Table Size: 1120 x 500 X Axis Travel 1020mm Y Axis Travel 520mm Z Axis Travel 540mm Rapid Traverses 20,000m/min Spindle: Spindle Speeds – 8,000ppm Tool Shank ISO40 Tool Storage Capacity 24 Tools Spindle Power 20Hp For sale with Jet Machinery Ltd Machine Serial Number: SMU00143 Cost: £27,500.00 + VAT Gjdsxndrdspfx Ag Njkc Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.  

Condition: reconditioned (used), Kalmijer Cookie machine if you have further questions please send an message Gjdpfxskzi Ule Ag Nokc

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Gjdpfxexftqdo Ag Nekc Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: used, Punching machine Bograma Gjdpfx Asxlr Nreg Nokc Description: - Standard equipped

Condition: new, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, 📝 Description & Additional Technical Parameters Product Description: The VTX-5 is part of the Tongtai VTX Series of compact CNC vertical tapping / milling centers. It is designed to combine high speed, rigidity, and precision in a relatively small footprint. It uses a direct-drive spindle to improve tapping accuracy and reduce maintenance compared to belt-driven designs. Roller guideways (linear rails) are used to ensure smooth, rigid motion. Tool changing is relatively fast, and the structure is optimized for stability and precision under moderate loads. Technical Parameters: Table size (L × W): 600 × 400 mm Maximum load on table: ~ 300 kg Rapid traverse (X / Y / Z): 60 / 60 / 60 m/min Spindle taper: 7/24 (No. 30) Spindle speed (standard): 12 000 rpm Spindle motor: 3.7 / 13 kW Maximum spindle torque: ~ 82 N·m Tool capacity (magazine): 16 tools standard Tool-to-tool change time: ~ 1.2 s Maximum tool weight: ~ 3 kg Machine overall dimensions: ~ 1 700 × 2 600 × 2 700 mm (L × W × H) Machine weight: ~ 2 850 kg Gksdpfxoxni Iqe Ag Nec

Condition: excellent (used), XYZ SLX 555 x 3M CNC Lathe (2018) Serial Number: SLM00083 Year: 2018 Control: Protrak SLX CNC Condition: Used – excellent condition Technical Specifications: Swing over bed: 560mm Swing in gap: 935mm Gap in front of faceplate: 297mm (max) Swing over cross slides: 350mm Cross slide travel: 290mm Distance between centres: 3000mm Maximum cutting length: 2900mm Spindle bore: 104mm Spindle nose: D1-11 camlock Spindle taper: MT7 in bush Spindle motor: 11 kW (15 HP) Spindle speeds: 30 – 1800 rpm (2 ranges) Tailstock travel: 200mm Tailstock taper: MT6 Tailstock diameter: 105mm Bed width: 500mm Machine footprint (L x D x H): 5220 x 2150 x 1950mm Machine weight: 7400kg Features & Equipment: Protrak SLX control Gksdpfxjxc Ipie Ag Njc Drilling attachment Quick-change toolpost 3-jaw chuck 4-jaw chuck 3-point steady

Condition: excellent (used), Year of construction: 2018, turning diameter: 560 mm, spindle speed (min.): 1,800 rpm, turning length: 3,000 mm, XYZ Proturn SLX555 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2018) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Godpfoxc Nmijx Ag Njkc Manufactured | 2018 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 6340kg Supplied with: 3 Jaw Chuck 4 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders Fixed Steady Interlocking Guards Auto Lubrication. Coolant. Worklight Tooling as Photographed We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79000 Machine Serial Number: SLM00083 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Hereby we offer a unique Italian ice cream machine from lady B trittico. Works on 220v normal plug connection and on water ideal to take with you on a trip or camping! The Bravo Lady B is a compact pasteurization and cooling machine, specially developed for smaller companies such as restaurants, bakeries or ice cream parlors. It combines two essential processes: 1. Pasteurization in the upper vertical vessel, with an adjustable temperature of +65°C or +85°C, depending on the desired pasteurization process. 2. Cooling in the lower horizontal cylinder, in which the mixture is quickly cooled to the desired temperature. A special feature is the patented system with which the hot mixture is transferred internally - without contact with the outside air - from the pasteurization vessel to the cooling cylinder. This guarantees maximum hygiene and enables efficient production. • Maximum filling quantity: up to 2 liters • Power supply: 230 volts, 3.2 kW • Connection system: ready to plug in • Cooling system: water cooling can be connected to a normal tap • Weight: 95 kg • Dimensions: 63 x 36 x 59 cm Maintenance and parts are still available from lobbia refrigeration technology Carpigiani Telme Taylor Kalte rudi Bravo trittico ice cream machines pasteurization pasteurization Gjdewgw Tbepfx Ag Njkc

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Vacuum fryer used for vegetable chips. In very good condition. Located in The Netherlands. Godpoxg Tfqofx Ag Njkc

Condition: used, Year of construction: 1999, functionality: limited functionality, machine/vehicle number: 990001, feed length X-axis: 800 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, spindle speed (max.): 8,000 rpm, spindle speed (min.): 50 rpm, total height: 2,300 mm, total width: 2,000 mm, table height: 850 mm, table load: 500 kg, overall weight: 3,000 kg, input voltage: 380 V, space requirement width: 2,000 mm, space requirement length: 2,500 mm, space requirement height: 2,300 mm, input frequency: 50 Hz, For sale is a solid and proven CNC milling machine, model Strathclyde SMT850, equipped with a user-friendly Heidenhain CNC control system. The machine is ideally suited for precise milling operations in workshops or small-scale production lines and has been regularly maintained. It is in excellent technical condition and ready for immediate use. This offer includes: Godpfexl Ttrex Ag Nokc - CNC machine including Heidenhain operator console with MPG - Tool carousel & clamping devices - Tool set: milling cutters, drills, dial indicator - Integrated coolant pump The machine can be inspected by appointment.

Condition: new, functionality: fully functional, feed length X-axis: 510 mm, feed length Y-axis: 510 mm, feed length Z-axis: 510 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, 📄 Product Description Gsdpoxnizdsfx Ag Nskc The Tongtai SH-4000P is a high-speed, high-rigidity horizontal machining center designed for efficient machining of aluminum and light metal workpieces. It features a compact structure, three-point support bed, high rapid traverse speed, and optional APC (Automatic Pallet Changer). The built-in spindle provides high speed and precision, ideal for automotive and general manufacturing industries. ⚙️ Technical Parameters Spindle speed 15.000 rpmSpindle Spindle Torque: 95 / 171 / 250 Nm Rapid Traverse (X/Y/Z): 60 m/min Table Size: 400 × 400 mm Maximum Workpiece Size: Ø 550 × H 800 mm Acceleration: 1.0 g on each axis Machine Dimensions: approx. 1,750 × 4,210 (or 5,060) × 2,720 mm Machine Weight: approx. 8,100–8,700 kg Fanuc controller model 0i-MF with Manual guide i and 10,4''LCD monitor Tool shank: BBT-40 ATC with 60 tools CTS ( coolant through spindle): 70bar Chip Conveyor integrated type with trolley Oil Skimmer

Condition: used, Model: VM5000 Weight: 3400KG Working surface of table: 355 x 1930mm Longitudinal travel: 1500mm Gkodpewmfiqefx Ag Noc Cross travel: 600mm Vertical travel of head: 480mm Quill diameter: 116mm Quill travel: 140mm Quill feeds: 0.0418 / 0.0786 / 0.1303 mm/rev Spindle taper: INT40 Spindle motor: 7.5Kw Main Motor Power: 5.6Kw Main Voltage: 415V Phase: 3 Cycle: 50HZ Year: 2003

Condition: excellent (used), Year of construction: 2007, XYZ Proturn SLX 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2007) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2007 Supplied with: Gjdjxawdkspfx Ag Nskc 3 Jaw Chuck Interlocking Chuck & Main Guards Machine Manuals 3 Toolholders (More available if required). TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication Jet Machinery Stock No: #78986 Machine Serial Number: SL286 Cost: £19,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, turning length: 760 mm, turning diameter: 400 mm, spindle bore: 54 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 150 rpm, Equipment: rotational speed infinitely variable, As-good-as-new teach-in lathe for both conventional and CNC turning operations. Includes tool trolley with various cutters, inserts, drill heads, and tapping head. Godpfoxb A Ikjx Ag Nekc

Year of construction: 2019, condition: used, The EFD machine we are offering has a capacity of 2000 mm, but once the MF and HF adaptation boxes are installed, this travel is limited to approximately 1700 mm. It is equipped with a Siemens 840 D CNC (replaced 3 months ago), with 3 digitized axes: Z, Y (200 mm), and C, a double spindle with dual tailstock controlled separately, 1 MF adaptation box, and 1 HF adaptation box. The machine height is 4400 mm. The maximum workpiece weight on the main spindle is 600 kg. The maximum weight per piece on the double spindle is 50 kg. The converter is transistor-type, with a power output of 300 kW and equipped with three frequency ranges: 100 kHz at 200 kW, 3 kHz and 10 kHz at 300 kW. Parameter monitoring is integrated into the Siemens 840 D CNC. It will control: voltage, current, power, MF or HF frequency, quench flow rate by analog flowmeter, quench water temperature via PT 100 probe, with a color printer included. Optionally, a serial link is available, allowing program transfer to avoid dual programming for the CNC and the RTM 100. SUPPLIED EQUIPMENT: - 1 galvanic isolation mains transformer, 400 V three-phase + earth (for network disturbance protection and operator safety) - 1 SINAC P M/H transistor converter Power: 20 to 300 kW Gedexc Exhepfx Ag Nokc Frequency: 3 to 100 kHz - 1 medium frequency adaptation box with 55 VT 8 transformer 1 capacitor bank for 3 kHz 1 capacitor bank for 10 kHz - 1 high frequency adaptation box without transformer 1 capacitor bank for 100 kHz - 1 manual selector switch for 3 and 10 kHz selection - 1 manual selector switch for 100 kHz or 3/10 kHz selection - 1 standard vertical traversing hardening machine, type HGL 2000, 3-AXIS, equipped with: - 1 SIEMENS 840 D controller (replaced 3 months ago) - 1 X-axis, vertical travel approx. 1500 mm depending on MF and HF adaptation boxes - 1 Y-axis, horizontal travel 200 mm - 1 C-axis spindle rotation, max workpiece weight 600 kg, max diameter 500 mm (according to inductor) - 1 double spindle with dual tailstock - 1 hydraulic circuit with analog flowmeter for quench water - 1 second hydraulic quench water circuit without flowmeter, solenoid valve controlled by program, no flowmeter supplied - 1 simple interface for high frequency inductor connection - 1 simple interface for medium frequency inductor connection - 1 operator access door - Integrated RTM 100 standard process monitoring system in the Siemens 840 D, with color printer - All necessary electrical interconnections for medium, high frequency, and low voltage - Complete documentation in French (user and operating manuals) This installation is highly versatile due to its wide frequency range (low, medium, and high), all provided by a single generator, making it rare on the market. The high power rating of 300 kW enables the processing of large or two workpieces simultaneously.

Condition: good (used), OMRON CPM1A control, 4 stations. Target machine for assembling and compressing door glass modules. Price is a net target price, a matter of final price agreement Purchase, acquisition, asset management of industrial equipment and machinery. Wide range of used machinery, industrial equipment Gkjdpfefruvcox Ag Noc

Condition: new, Year of construction: 2025, laser power: 1,500 W, pipe diameter (max.): 6,000 mm, pipe length (max.): 6,000 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Glorystar Laser ALL NEW Tube Laser Machine | VS6008G | 1.5KW Gsdpfx Aov Dutzjg Nokc (Nur für deutschen Preis!!!) 1.5KW Laser Source Cutting Head Glorystar Servo motor Inovance Screw rod Standard Guide rail Standard Chuck Standard High-speed flexible cable IGUS Electrical control Schneider automatic loading system (standard) Round tube ≤Φ87mm Square tube ≤60mm*60mm Rectangular tube diagonal ≤87mm

Condition: like new (used), Year of construction: 2021, operating hours: 250 h, functionality: fully functional, overall weight: 2,000 kg, total length: 3,500 mm, total width: 1,800 mm, total height: 2,100 mm, type of input current: three-phase, CNC Milling Machine for Sale Due to Retirement. Description For sale: CNC milling and cutting machine. Specifications: - Year: 09/11/2021 Gksdpjxcvzmefx Ag Nec - Working table dimensions: 1500 x 3000 mm - Automatic tool changer - 9000W air-cooled spindle - 8-tool linear magazine - 4-zone vacuum table with pneumatic stops - 7500W 380V vacuum pump - 2-bag chip vacuum extractor, 1500W 220V - Compressor - Z-axis travel: 200mm (X: 3000mm, Y: 1500mm) - Yaskawa 750W servo motors on X, Y, and Z axes - Cutting tools (carbide, diamond) - Various additional equipment - Spare parts kit - Control station with computer - Software included: - TopSolid (expandable for design and drafting) - CamBam (programming) - Opticoupe (cutting optimization) Vanloisir is a van conversion company based in Charente-Maritime, operating for over 11 years. Due to retirement, we have decided to sell our CNC machine, along with all software (TopSolid) and accessories. We are offering the complete package for €14,000. For an additional fee, training for the machine's operation can also be arranged.

Condition: ready for operation (used), Year of construction: 2002, XYZ TC250 Vulcan Turning Centre Year of manufacture 2002 Ø250mm 3 Jaw Power Chuck. Max. Swing Ø500mm. Max. Swing Over Cross Slide Ø330mm. Max. Turning Length 650mm. Spindle Bore Ø87mm. Max. Bar Capacity Ø77mm. Axis Travel 'X'=220mm, 'Z'=650mm. Maximum Spindle Speed 3,500rpm (22.5kW Motor). Spindle Nose A2-8. 12 Position Turret (VDI 40 Toolholders). *For sale with Jet Machinery Ltd* Stock No: 78992 Serial No: 202068 Price: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Gjdpfx Asw U Ekceg Nekc Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2014, condition: excellent (used), Gainsborough Vertical Form & Seal Bagging Machine Continuous VVF Bagging Machine Complete with Markem-Inage SmartDate X40 Coder In Excellent Condition Gkodpfx Agouct Ive Nsc Has had very little use

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 5 h, drilling depth: 4,000 mm, MM-14K Screw Foundation Drive Head Gsdpfxjridg Ds Ag Njkc Our anchor drives for mini loaders and mini machines up to 3.5 tonnes have been developed in conjunction with the leading screw anchor/pile installers around the world. Digga's range of compact planetary drives form a comprehensive portfolio for the foundation drill, post hole drill, screw pile and utility construction markets. Digga anchor drives are manufactured in Australia specifically for the diverse global landscape. FEATURES: Compact, high torque gearbox manufactured by Digga Lightweight and compact for easy transport Fitted with high efficiency Danfoss/Digga Geroler hydraulic motor Coming soon: Digga's HALO Alignment System Over 40 years of design and manufacturing experience 1 year gearbox warranty and 1 year motor warranty

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm Gjdpfx Aewk Rlxsg Nekc width: 65cm weight: 240kg

Condition: good (used), functionality: fully functional, Year of construction: 1999, working width: 6,000 mm, bending angle (max.): 140 °, sheet thickness steel (max.): 2 mm, input voltage: 400 V, Key Features of the LSK HK-60 CNC: Sheet Length Capacity: 6,000 mm​ Gjdpfx Agev Urb Do Nekc Sheet Thickness (EN10130): 1.5 mm​ Bending Angle Range: 0 – 135°​ Upper Beam Stroke: 0 – 140 mm​ Back Gauge Travel Distance: 5 – 1,250 mm​ Back Gauge Speed: 1 meter per 3 seconds​ The machine is equipped with a comprehensive work cycle that includes programmable bending angles, upper beam lifting heights, and back gauge positions. Standard functionalities encompass rounded corner bending and open hem pressing, with options for both manual and automatic operation modes. The control system operates on an industrial PC with a Windows Embedded operating system, providing a user-friendly interface for programming and operation Verify the accuracy of the information with the seller

Condition: new, Year of construction: 2025, workpiece weight (max.): 12,000 kg, turntable diameter: 280 mm, overall weight: 120 kg, The Robotmover 20 is the ultimate solution for moving heavy loads such as industrial machinery, installations, or steel structures – 100% electric, so zero emissions and noise pollution. Work with unparalleled flexibility thanks to the wireless remote control and the ability to effortlessly change direction 360°. This compact electric mover excels at maneuvering through tight spaces, making it an indispensable tool in congested or confined environments. Thanks to the 48V-60Ah battery, the Robotmover ensures long-lasting operation, saving both time and labor. Gedpow I Rt Nefx Ag Nskc Whether you're moving equipment or heavy loads, this electric Robotmover is your reliable partner that streamlines your work and increases productivity. Flexible Operation: The wireless remote control provides infinitely variable drive with 360° direction changes. Strong Traction: The two powerful 1000W motors equipped with magnetic brakes produce a robust pulling force of 20 tons. High Load Capacity: The triple-bearing turntable effortlessly carries a maximum load of 12 tons. Long Battery Life: The 48V lithium-ion battery with a 60 Ah capacity provides 4-5 hours of use without frequent charging. Scope of supply: Robotmover 20, remote control, battery chargers Also available transport crate with garage, battery operated hydraulic jacks, fixed following rollers electric skates power skates machine mover robot mover jung lifting equipment hydraulic jacks

Condition: excellent (used), Year of construction: 2013, Travels X-axis: 650 mm Gksdev Sdcnopfx Ag Nsc Y-axis: 560 mm Z-axis: 560 mm Rapid traverse: 32 m/min 2 work tables each: (setup side / machining side) Pallet dimensions: 500 x 500 mm Possible table position: 360,000 degrees Max. workpiece weight: 400 kg MILLING SPINDLE Spindle mount: SK-40 DIN 69871 Direct drive: 8,000 rpm with gear box Drive power: 10 / 16 kW Tool changer Tool changer type: Double gripper Number of tools: 40 Max. tool diameter: ø 115 mm Max. tool length: 300 mm Internal coolant system Spindle cooler Chip conveyor Connection data and dimensions Air connection: 6 bar Total connected load: 25 kVA Rated voltage: 380V 50/60 Hz Minimum machine weight: 6,700 kg Machine dimensions (LxWxH): 3,500 x 2,500 x 2,650 mm Very compact machine! Video available.