Used Notching Machine for sale (64,781)

Condition: new, Year of construction: 2013, plate thickness 1,6 mm pressure 450 MPa 150 x 150 x 90° table surface area 650 x 500 mm 875 mm cutting angle - upper blade 4 ° weight of the machine ca. 0,075 t • manual notching machine with lower frame • sheet thickness: - steel 450MPa to 1.6 mm, - aluminium to 2.25 mm, - plastic to 3.0 mm, Lsdpfx Alot Smgxe Neac • machine for demonstration

Condition: used, Year of construction: 1987, plate thickness 3 mm angle adjustable from - to 30 - 120 Grad table height 900 mm Ledoy Ihanjpfx Al Nsac weight ca. 800 kg Cutting capacity: 3 mm St40 at 150 x 150 mm, 2 mm stainless steel; cutting angle continuously adjustable from 30° to 120°; pneumatic clamping for angle adjustment (Boschert system); machine is in good condition

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, cutting force: 12.5 t, sheet thickness steel (max.): 6 mm, overall weight: 2,000 kg, Equipment: CE marking, emergency stop, finger protection, foot remote control, Hydraulic notching machine Manufacturer: Boschert, Type: K30 – 120, Punching press: Trumpf Year of manufacture: 2001 Technical data Width x Depth x Height: 1.5 x 1.6 x 1.4 m Weight: 2,000 kg Table dimensions: 1600 x 1000 mm Station 1: Notching Lsdpfszcm Ncex Al Neac Angle range: 30 - 120 degrees (infinitely adjustable) Cutting length: 200 mm Cutting capacity: 6 mm in ST 40 steel 4 mm in stainless steel Station 2: Punching (Trumpf tool system) Punching force: 12.5 t Punching diameter: 105 mm max. Overhang: 300 mm All information is subject to change without notice. The machine is in very good condition. A demonstration under power is possible at any time in our showroom.

Condition: good (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 223002360, milling height: 150 mm, input voltage: 400 V, overall weight: 700 kg, total length: 1,700 mm, total width: 1,000 mm, total height: 1,600 mm, input frequency: 50 Hz, milling length: 400 mm, pivoting range: 60 °, rotational speed (max.): 2,800 rpm, ELUMATEC AF 223/01 Notching milling machine Ledpfx Alezdyqnj Njac - Rated current: 6.1 A - Power consumption: 2500 W - Swivel range: up to 60° to the right and left - Max. milling depth: 110 mm - Max. profile height: 200 mm - Max. cutter diameter: 280 mm - Cutter mounting bore diameter: 40 H7 mm Attention: The item must be collected on July 2, 2026, at a date to be confirmed. FCA D-72770 Reutlingen - loaded onto a truck.

Year of construction: 1990, condition: ready for operation (used), A hydraulic Euromac notching machine is available. Notching capacity steel/stainless steel: 6mm/5mm, blade length: 220mm, working angle: 90°, angle adjustment: 30°-140°, stroke rate: approx. 50/min. Machine dimensions X/Y/Z: approx. 1100mm/950mm/1300mm, weight: approx. 800kg. An on-site inspection is possible. Lodszd Ei Aspfx Al Noac

Condition: excellent (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: 398, control type: manual, degree of automation: manual, actuation type: hydraulic, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, input frequency: 50 Hz, type of input current: three-phase, overall weight: 900 kg, cutting length (max.): 150 mm, Equipment: angle stop, foot remote control, Cutting performance (90° notch) Laodpfevk I Avsx Al Nsc - Normal steel: 4.0 mm - Stainless steel: 3.0 mm Cutting angle: 30-120° Cutting length: 150 x 150 mm Working height: 900 mm Table: 1000 x 650 mm Motor power: 3.0 kW Weight approx. 900 kg Dimensions: 1250 x 1000 x 1160 mm (LxWxH) Equipment: - Angle adjustment 30° - 120 ° continuously - 2 digital displays for the adjustable stops * Set-up stroke * Single stroke * Continuous stroke - Plexiglass protection for better transparency - Hardened blades also for cutting stainless steel - Adjustable stroke height setting - Removable cutting container - Freely movable foot switch BOSCHERT angle adjustment: - the one-piece 30° The upper blade is directly connected to both a left and a right lower blade within a tool - for each notch over 30°, the notch is made once to the left and once to the right. - the swivel adjustment is carried out pneumatically immediately after the first notch has been completed. The machine can be demonstrated on site with power on. All information is provided without guarantee. Subject to errors and prior sale.

Condition: used, Year of construction: 1999, plate thickness 4 mm plate length 200 mm total power requirement 3 kW Lodpsy Tif Asfx Al Neac weight of the machine ca. 550 kg dimensions of the machine ca. 1,0 x 0,8 x 1,0 m

Condition: as good as new (ex-display), Year of construction: 2024, Boschert LB13 blanking machine Type LB13 blanking/Trumpf Cutting capacity: 6 mm St40 / 4 mm V2A Internal stop for cutting strips. Laedehp N Ryopfx Al Nsc Station 2: blanking with Trumpf tool system Punch diameter max. 76 mm Overhang 150 mm Punching force approx. 15 tons with active stripping system Demonstration machine Year of manufacture: 2022

Condition: used, Notching Machine COMACA type N/EPAS Maxi Sheet thickness: 3 mm Table size: Length 1050 mm x Depth 700 mm Ends tables dimensions: 900 x 470 mm Throat depth: 110 mm Orientable stop Blade length: 225 x 225 mm Voltage: 380 V Total length with ends tables: 2900 mm Lsdpfszdif Djx Al Njac Length: 1200 mm (with retreated ends tables) Depth: 800 mm Total height: 1100 mm Weight: approx 1 T

Condition: used, Year of construction: 1990, Technical details: plate thickness: 8 mm cutting range: 300 x 300 mm table-size: 1100 x 900 mm voltage: 380 V / Hz Weight approx.: 1,7 t dimension machine xH: 1,3 x 1,2 x 1,5 m Lasdpfx Alsu Ictbj Njc For notching of 90° sheet metal segments, works hydraulically. On the table are 2x rulers 300mm 90° offset. T-slot according to DIN 680: a=12mm, h=21mm, b=22mm, c=14mm with length = 1x 330mm and 2x 700mm Operation via control panel and foot switch *

Condition: used, Technical details: total power requirement: 2,2 kW table-size: 500 x 780 mm working area: 250 x 250 mm height over floor: 940 mm voltage: 380 V / Hz Weight approx.: 0,642 t dimension machine xH: 1,0 x 1,3 x 1,2 m HYDRAULIC NOTCHING MACHINE On the table there are left and right 90° linear scales length 250mm stop bars length 400mm; angle adjustable left/right 90°) operated by switch button and/or hand/foot control incl. tool 2x upper and lower knives built in (knife length 250mm) Laodpfx Aju Icq Tol Nsc *

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Lodsrzfh Hjpfx Al Nsac Table height: 940 mm Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition

Condition: ready for operation (used), Year of construction: 1982, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm strokes per minute ca. 60 Hub/min angle adjustable from - to 30 - 120 Grad engine output 4.0 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1700 x 1000 x 1500 mm * Machine with 1x new set of notching knives (!!) * installed in 2026 * approx. acquisition costs 1.000 Euro Lasdpfoxaaiisx Al Nsc Equipment: - electro-hydraulic notching machine, with angle adjustment * Angle adjustment via hand wheels - Front control panel - Plexiglas protection for better transparency - Hardened blades also for cutting stainless steel - Planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x cutting stops * with movable and replaceable stop bars - lateral cut material ejection - Freely movable foot switch - operating instructions

Condition: good (used), Year of construction: 1980, machine/vehicle number: PN 0312, Offer 26138 Technical data: - 90° cutting head, pneumatically operated - Cutting thickness: - Normal steel: up to 2 mm - Stainless steel: up to 1.5 mm - Aluminum: up to 3 mm - Blade length: 130 mm - Table size: W 600 x D 380 mm - Working height: 940 mm - Foot pedal - Compressed air requirement: 6 - 8 bar - Space requirement: approx. W 600 x H 1250 x D 850 mm Lodpfxey U Hv Uo Al Njac - Weight: approx. 180 kg

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Laedpfsmck Ryox Al Nsc Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: good (used), Year of construction: 1990, machine/vehicle number: 0164390271794, Offer 26137 Hydraulic combination flat bar shear with notching device and punch press Technical data: - Flat bar shear - Blade length 360 mm - For flat material 350 x 13 mm - or 230 x 20 mm - Profile steel shear - L-steel at 90° 140 x 13 mm Lasdpfxoy Uwu Uo Al Nec - at 45° 70 x 7 mm - T-steel at 90° 70 mm - Round bar shear - Round steel 50 mm - Square steel 42 mm - Notching device - For material up to 12 mm - Right-hand notching up to 52 x 90 mm - Punch press - Punching force approx. 550 kN - Stroke, infinitely adjustable 0 - 60 mm - Punches holes in steel up to 30 mm diameter in 16 mm - Overhang 320 mm - Hydraulic drive 400 V / 5.5 kW - Two separate working cylinders and separate foot switches for each - Space requirement approx. W 1400 x H 1600 x D 750 mm - Weight approx. 1300 kg - Includes: - Various punches and dies in a separate tool cabinet - Support and stop table - Stop

Condition: ready for operation (used), Notching machine, COMACA Type 130/3mm -CE marking -Well-maintained original condition -Cutting angle 90 degrees -Work table 600x460mm -Cutting capacity 130mm -Cutting capacity 3mm / sheet thickness -Stroke rate 50-60 strokes per minute -Work table with T-slots/scale/adjustable angle stops -Foot pedal -Safety device Dimensions: L x W x H 0.7 x 0.7 x 1.3 meters / Weight 250 kg Ledjy T I Ngepfx Al Neac Errors and omissions excepted.

Condition: new, Year of construction: 2026, Suitable for Outer pipe diameter Ø 26.9(3/4″) Ø 33.7(1″) Ø 42.4(1_¼") Ø 48.3(1_1/2″) Ø 60.3(2″) Outer pipe diameter for zinc spout Ø 22 - Ø 76 Advantage: Quick and easy notching Wall thickness (steel): 5 mm Wall thickness (stainless steel): 3 mm Lajdpfxoy T Rauo Al Nsc Weight: 93 kg Operation: Electric (2.2 kW) Application: Round, square and rectangular tube Easy to operate With the motorized pipe notcher AL1-2U you can notch pipe outside diameters of Ø26.9 (3/4″), Ø337 (1″), Ø42.4 (1 ¼"), Ø48.3 (1 ½"), Ø60.3 (2″) and pipe outside diameters for zinc flow from Ø22 to Ø76. The machine is started at the push of a button and the pipe notcher is driven continuously. This allows the user to continue production without having to switch the machine on every time. Electrically driven With the motorized pipe notcher AL1-2U you can notch pipe outside diameters of Ø26.9 (3/4″), Ø337 (1″), Ø42.4 (1 ¼"), Ø48.3 (1 ½"), Ø60.3 (2″). Do you often notch pipes? Then the motor-driven pipe notcher AL1-2U with 2.2 kW electric motor is the solution for you! The motor forms a single unit with the special eccentric shaft that drives the punching tool. In addition, the motor is equipped with an on/off switch with 0-voltage protection and a protective cap.

Condition: used, Year of construction: 1987, plate thickness 4 mm Lajdpfsyv Ntxox Al Nec blade length 150 mm cutting angle 30-120 ° Table dimensions 1000x650 mm

Condition: good (used), Gebruikte inkepingmachine van Euromac Type: 250 4 s Ljdpfx Alsywg S Ie Njac Capaciteit: 250 x 250 x 4 mm

Condition: good (used), functionality: fully functional, Year of construction: 1998, Used notching machine from Euromac Lodpfx Aoyu H T Eel Njac Model: 220 6 S Capacity: 220 x 220 x 6 mm

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Laodpfoyui S Rox Al Njc Niederlande 5104 € 98.51 € 3/4" 26,9 mm, 1" 33,7 mm, mm 5 mm 3 mm 87 kg The motor driven AL 1-2E can be used to notch pipes with an external diameter of 26.9 mm (3/4"), 33.7 mm (1"), 42.4 mm (1 1/4"), 48.3 mm (1 1/2") and 60.3 mm (2"). Do you often have to notch pipes? If so, the motor-driven AL1-2E equipped with a 2.2 kW electric motor is the ideal solution! The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande Lasdpfx Aoyui Sqol Noc 5932 € 114.49 € 3/4" 26,9 mm, 1" 33,7 mm, mm 5 mm 3 mm 93 kg The motor driven AL 1-2U can be used to notch pipes with an external diameter of 27.9 mm 26.9 mm (3/4"), 33.7 mm (1"), 42.4 mm (1 1/4"), 48.3 mm (1 1/2") and 60.3 mm (2")and notch pipes with an external diameter of 22 mm to 76 mm for sink outflows. Do you often have to notch pipes? If so, the motor-driven AL1-2U equipped with a 2.2 kW electric motor is the ideal solution! The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 811 € 3/4" 26,9 mm, 1" 33,7 mm, mm Laedpfoyq Svdex Al Njc 3 mm 2.5 mm 8 kg The AL 1 can be used to notch pipes with an external diameter of 26.9 mm (3/4"), 33.7 mm (1") and 42.4 mm (1 1/4"). The hand-operated machines can be easily wall h ALMI pipe notchers filing or milling pipes has become a thing of the past. The major benefit of this pipe notcher, compared to other notchers, is that one unit can be used to notch a series of diameters without needing to change parts for each diameter. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 979 € 1 1/2" 48,3 mm, 2" 60,3 m mm 3 mm 2.5 mm 15 kg The AL 2 can be used to notch pipes with an external diameter of 48.3 mm (1 1/2") and 60.3 mm (2"). ALMI products are subjected to stringent quality control inspections before they leave the factory. ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use. Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines. Laedpfx Alsyq Su Hs Njc All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.