Used Objet Eden 330 for sale (2,120)

Year of construction: 2025, condition: used, Year of manufacture: 2025 Rbodpfjwzl Naox Afbjt New: No Part suitable for: trucks Overall condition: very good Technical condition: very good VAT/margin scheme: VAT deductible Type number: K105874

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 52181, Year of construction: 2013, operating hours: 40,000 h, Stratasys 3D printer. Printer purchased in March 2013 (original price: €120,000). Maintenance regularly performed by Stratasys. The machines are in top condition and fully functional. All printheads are in the printer. Machines ready for pickup. Rbjdpfxowna R Se Afbet

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 52178, Year of construction: 2013, operating hours: 40,000 h, Stratasys 3D printer. Printer purchased in March 2013 (original price: €120,000). Maintenance regularly performed by Stratasys. Rbjdpfx Afswna N Uebst The machines are in top condition and fully functional. All printheads are in the printer. Machines ready for pickup.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 52177, Year of construction: 2013, operating hours: 40,000 h, Stratasys 3D printer. Printer purchased in March 2013 (original price: €120,000). Maintenance regularly performed by Stratasys. Rbodpfx Aowna Nnsfbot The machines are in top condition and fully functional. All printheads are in the printer. Machines ready for pickup.

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Equipment and technical specifications: - With glue application unit for hot melt adhesive granulate - Suitable for processing PU adhesive granulate in compliance with adhesive processing regulations - Glue reservoir located beneath the glue roller - Glue application to the workpiece via glue roller in both co- and counter-rotation - With contact heating shoe for preheating the workpiece - Automatic edge magazine for rolls and fixed lengths - Pressure zone with pneumatically driven main pressure roller and special follow-up pressure rollers to compact the top and bottom glue joints - Centrally adjustable top pressure - Central manual chain lubrication - Control panel at machine infeed - End trimming aggregate: - For trimming front and rear edge overhang; high-precision linear guide - 2 motors, each 0.18 kW - Tilt range for straight and angled cuts: 0–15 degrees - Flush milling aggregate: - Top and bottom with vertical and horizontal sensing - Swivel range 0–15 degrees with 2 milling motors using interchangeable straight/radius cutter combinations - Digital counters enable fast and defined, i.e. repeatable, adjustments - Two-point pneumatic adjustment of top and bottom milling motors - Scraper unit for finishing, with horizontal/vertical sensing - Extendable workpiece support up to 350 mm - Integrated section control for contactless operation of processing functions. Adjustable via keypad and LED display - Workpiece thickness: 8–50 mm - Edge thickness: 0.4–3 mm - Feed speed: approx. 9 m/min - Connected load: 4.1 kW - Compressed air connection: 6 bar Machine length: 3,150 mm Redpfx Ajwkbd Ejfbebt Weight: approx. 750 kg Availability: short-term Location: Röllbach

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 0306283/0, - Very good metal band saw. High cutting performance. - 5 new saw bands Redpfx Ajxnartjfbsbt - Roller conveyor approx. 5 m (also fully functional)

Condition: excellent (used), axle configuration: 2 axles, first registration: 01/2024, suspension: air, color: other, Year of construction: 2012, Equipment: ABS, crane, = Additional options and accessoires = - Air suspension = Notes = Semi Low Loader: Model: TRIAS 712-330 Dimensions: Collapsed: L13.65 x W2.00 meters Hydraulically extendable: 2.40 meters Wheelbase: 9.98 meters Galvanized chassis 20 side stakes (rungs) 6 stainless steel toolboxes Air suspension Steering axles Loading height in the low section: 1.10 meters Dolly (TRIAS 812-190): Hydraulically liftable and steerable front axle Second axle lift Rodswwtm Eepfx Afbsbt Air suspension on 2nd and 3rd axles Galvanized chassis Dimensions: L5.24 x W2.00 meters Wheelbase: 4.14 meters Tridec steering system type HS Crane (Palfinger PK 26002F): Hydraulic extension with 7 sections 3 hydraulic outriggers Lifting capacity at various outreach lengths: 4.5 meters: 4,850 kg 6.4 meters: 3,150 kg 8.3 meters: 2,250 kg 10.4 meters: 1,640 kg 12.5 meters: 1,280 kg 14.6 meters: 1,040 kg 16.7 meters: 880 kg 19.1 meters: 770 kg Remote control 0 operating hours Additional Information: Dolly and low loader can be remotely controlled and moved via hydrodrive. All components (dolly, low loader, and crane) are brand new and unused. Particularly suitable for applications such as the relocation of light masts or advertising columns or the repositioning of road signs. For more detailed information, please contact the seller. = Further information = Axle make: BPW Suspension: Air suspension Rear axle 1: Steered; Tyre tread left: 100%; Tyre tread right: 100% Rear axle 2: Steered; Tyre tread left: 100%; Tyre tread right: 100% Crane: Palfinger 26002F, year of manufacture 2011 Technical condition: very good Optical condition: very good Price: On request

Condition: excellent (used), axle configuration: > 3 axles, first registration: 01/2024, suspension: air, color: other, Year of construction: 2012, Equipment: crane, Semi Low Loader (Low Loader): Model: TRIAS 712-330 Dimensions: Collapsed: L13.65 x W2.00 meters Hydraulically Extendable: Up to 2.40 meters Wheelbase: 9.98 meters Galvanized chassis 20 side stakes (rungs) 6 stainless steel toolboxes Air suspension Steering axles Deck height in the low section: 1.10 meters Dolly (Trias 812-190): Hydraulic lift and steerable front axle Second axle lift Air suspension on second and third axles Galvanized chassis Dimensions: L5.24 x W2.00 meters Wheelbase: 4.14 meters Tridec HS steering system Crane (Palfinger PK 26002F): Hydraulic extension with 7 sections 3 hydraulic outriggers Lifting capacity at various outreach: 4.5 meters: 4,850 kg 6.4 meters: 3,150 kg 8.3 meters: 2,250 kg 10.4 meters: 1,640 kg 12.5 meters: 1,280 kg 14.6 meters: 1,040 kg 16.7 meters: 880 kg 19.1 meters: 770 kg Remote control 0 operating hours Additional Information: - Dolly and low loader are remotely operable and can be maneuvered via hydrodrive. - All components (dolly, low loader, and crane) are brand new and unused. Rodpowwtmrofx Afbobt - Particularly suitable for operations such as relocating light or advertising masts or repositioning road signage. For more detailed information, please contact the seller directly. = Further Information = Axle configuration: Axle brand: BPW Suspension: Air suspension Front axle 1: Tire tread left: 100%; Tire tread right: 100% Front axle 2: Tire tread left: 100%; Tire tread right: 100% Front axle 3: Tire tread left: 100%; Tire tread right: 100% Rear axle 1: Lifting axle; Steered; Tire tread left: 100%; Tire tread right: 100% Rear axle 2: Lifting axle; Steered; Tire tread left: 100%; Tire tread right: 100% Functional: Crane: Palfinger PK 26002F, Year of manufacture: 2012 Condition: Technical condition: Very good Visual condition: Very good Financial Information: Price: On request VAT/Taxation: VAT refundable

Condition: used, Year of construction: 2015, lifting height: 31,000 mm, fuel type: electric, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 23.950 kg Functional Lifting capacity: 600 kg Working height: 3.300 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Rbjdpfx Afewd Nmnsbjt Other information Delivery terms: EXW Transport dimensions (LxWxH): 6,61x1,4x4,29 Production country: NL Additional information Please contact Christian Theißen for more information Manufacturer: Holland Lift Model: Combistar HL-330 E14 4WDS-N Year of build: 2015 Condition: Used Data: Max. working height: 33,03 m Max. platform height: 31,03 m Lifting capacity: 600 kg Lifting capacity on extension: 600 kg Drive type: Battery Platform dimensions LxW: 6,39 x 1,19 m Platform lenght pushed out: 8,40 m Total dimensions LxW: 6,61 x 1,40 m Transport height with / without railing: 4,29/3,11 m Movable up to working height: 33,03 m Ground clearance: 0,16 m Only indoor using: no Own weight: 23.950 kg Special features: white tires, Platform extendable to 8.40 x 1.19 m, 4-wheel steering, all-wheel drive, Anchor points for restraint systems (PPE) available. Location: 41468 Neuss immediately available

Condition: used, In this offer you purchase a used feeding unit "BDT SIS-330 Feeder" Rbsdor D Nw Rjpfx Afbjt Object of sale: 1 x BDT SIS-330 Feeder Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: new, turning diameter over bed 320 mm turning diameter over slide rest 220 mm turning length 600 mm turning diameter in the gap 320 mm turning speeds 60 - 1650 U/min centre height 160 mm spindle bore 38 mm tailstock quill taper MT 3 MK connected load frequency 400 V total power requirement 1,1 kW weight of the machine ca. 340 Kg dimensions of the machine ca. 1,4 x 0,75 x 0,7 m Rbjdpfx Aeupxlnsfbet Center lathe with: 3-jaw chuck 160 mm. 4-jaw chuck 200 mm. Faceplate 200mm Fixed bezel Continuous bezel 4-way steel holder. Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Longitudinal and cross feed Complete coolant system Forage protection Set of change gears Machine tools

Condition: new, table length 330 mm table width 220 mm x-travel 210 mm y-travel 125 mm table height 150 mm Rbodpfx Afjupw Twebst T-slots 12 mm weight 33 kg dimensions 0,41 x 0,35 x 0,22 mm Cross table with turntable

Condition: new, 1 brand-new semi-automatic high-performance horizontal bandsawing machine with double column guidance and 2° cutting inclination to the table support surface Make: HUVEMA / BEKA-MAK, Origin Turkey Model: BMSY 330 C Technical data: Sawing capacity 90° round 330 mm Sawing capacity 90° rectangular 360 x 330 mm Sawing capacity 90° square 330 mm Sawing capacity 45° round approx. 250 mm Sawing capacity 45° rectangular approx. 250 x 325 mm Sawing capacity 45° square approx. 250 mm Size of the saw blade 5000 x 34 x1,1 mm Infinitely variable band speed 20 - 100 rpm. Rsdpofk Eu Njfx Afbsbt working height 635 mm Engine power 3 kW hydraulic motor 0,55 kW Dimensions L x W x H 2830 x 920 x 1630 mm Machine weight 1030 kg Accessories / Special features: - Semi-automatic double column band saw - Linear guides - 2° saw cut to the table support surface - Infinitely variable cutting speed via potentiometer on the control panel - Hydraulic vice - Hydraulic mechanical saw blade tensioning - Powerful drive motor - Sensitive cutting pressure regulation - Thermal overload protection - Optical height adjustment - Heavy duty gearbox - Coolant device - Feed roller conveyor 1200 mm - Chip brush - 1 pc. Bi-metal saw band - control panel - CE conform Delivery time: approx. 8 weeks after receipt of order Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: new, For technical specifications, see the PDF file. Rbodpfsxp H Rljx Afbst

Condition: new, For technical specifications, see the PDF file. Rbodpexp H Idefx Afbst

Condition: new, For technical specifications, see the PDF file. Redpfx Asxp Hyysfbsbt

Condition: new, sheet length: 2600sheet thickness: 20upper roll diameter: 330 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 13.600,00 Rjdpfxod Ab S Nj Afbjbt Side supports EURO 9.200.00 We have many references!

Condition: new, bending length: 2100sheet thickness: 25upper roll diameter: 330 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings Rbsdod Ab S Rjpfx Afbot - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 13.600,00 Side supports EURO 8.400.00 We have many references!

Condition: new, sheet thickness: 25bending length: 2100upper roll diameter: 330 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- Rodpfxjd Ab R Do Afbebt - center support EURO 13.600,-- - side supports EURO 8.400,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, bending length: 3100sheet thickness: 16upper roll diameter: 330 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 13.600,00 Side supports EURO 9.400.00 Rsdped Ab S Iefx Afbebt We have many references!

Condition: new, sheet thickness: 16bending length: 3.100upper roll diameter: 330sheet length: 3.100 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 13.600,-- - side supports EURO 9.400,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll Rbodpfjd Ab Rzjx Afbet - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, bending length: 4100sheet thickness: 9upper roll diameter: 330 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: Rbedpfod Ab S Hox Afbst - variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 13.600,00 Side supports EURO 10.250,00 We have many references!

Condition: like new (used), Center height over bed: 330 mm, max turning diameter over carriage: 408 mm, max turning diameter over bed: 640 mm, max turning diameter in gap: 899 mm, distance between centers: 2000 mm, variable spindle speed, rpm: 18-1500, spindle bore diameter: 105 mm, spindle nose: ASA 11”, tailstock: MT5, quill diameter: 90 mm, travel: 250 mm. cross slide travel: 275 mm. main motor: 15 hp. machine weight: 3450 kg. Rjdpfjx Dikkox Afbjbt

Condition: as good as new (ex-display), Infeed width: 720 mm Infeed height: 330 mm Rotor diameter: 1,000 mm Rotor knives: 2 pcs Stator knife: 1 pc Infeed unit: 2 x 3 rollers Rjdpfjgabfqox Afbsbt Motor: 110 kW Machine weight: approx. 8,000 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Offered for sale is a Kolbe bone saw, 380V. V2A. Model: K-330. Year: 2011. The saw is fully functional and ready for immediate use. Rodpfxsw Nbc Ro Afbobt Further information available upon request. Payment in cash or by advance payment! Sale only to businesses, no guarantee, no warranty.