Used Oil Burner for sale (6,904)

Year of construction: 2018, condition: new, Condensate treatment: new Kaeser oil/water separator CF 38 Nlodpedmqy Isfx Afwjf Technical data: max. flow rate for oil-cooled screw compressors and oil types in climate zone 2 (= Central & Southern Europe, parts of South America, North Africa): 22.5 m³/min for the oil types S-460, MOL, MOH, PAO, VCL 29.3 m³/min for the oil type VDL Tank size (volume): 115.5 l Filling volume: 84.3 l Condensate inlet connection: 3 x DN 13; 1 x DN 25 Water drain connection: DN 40 Oil drain connection: DN 40 Oil collection container: 2 x 10 l Weight: 36.5 kg Dimensions W x D x H: 530 x 764 x 1090

Condition: new, Year of construction: 2026, operating hours: 1 h, New speed controlled ALMIG LENTO 15 LK screwcompressor oilfree, compressor is on stock Immediately available. Controller: Air Control HE Technical specifications Type: LENTO 15LK Possible overpressures of the compressor: (infinitely adjustable): 5 to 10 bar Delivery quantity at minimum / maximum speed: at 5 bar min/max : 1,03 to 2,64 m³/min at 6 bar min/max : 1,00 to 2,42 m³/min at 7 bar min/max : 0,97 to 2,20 m³/min at 8 bar min/max : 0,93 to 2,03 m³/min at 9 bar min/max : 0,90 to 1,82 m³/min at10 bar min/max : 0,87 to 1,63 m³/min Nljdpfedtm Ndox Afwjf elektric motor power: 15 kW Operating voltage / frequency: 400/50 V / Hz Residual oil content: 0 mg / m³ SPL: 50% load: 66 dB (A) 100% load: 68 dB (A) Length: 1880 mm Width: 850 mm Height: 1985 mm Weight: 890 kg Compressed air connection: G 1 inch

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, Talbot T150 warehouse wood waste heater will heat a warehouse upto 5000 square feet, excellant condition serviced with Talbots qualified engineers Nsdezc Hkyepfx Afwelf

Condition: new, Year of construction: 2024, machine/vehicle number: 5.3495.0, Kaeser Oil/water separator Type: Aquamat CF 6 Tested and certified condensate treatment The AQUAMAT treatment system enables the compressor operator to carry out condensate treatment in-house, thereby greatly reducing the amount remaining for disposal. An AQUAMAT can save approximately 90% of the costs associated with arranging for the full volume of condensate to be treated and disposed of by a specialist contractor, therefore the initial investment is very quickly recovered. Technical data Nledpov Ta D Djfx Afwef Suitable for max. compressor delivery volume 3.8 m³/min (using: Sigma Fluid MOL or S 460; for Kaeser rotary screw compressors in climate zone 2*) Receiver volume 18.6 l Fill volume 11.7 l Condensate inlet connection 2 x G 1/2 Water drainage connection (hose diameter) DN 10 Net weight approx. 5.8 kg Permissible condensate temperature +5 to +60 °C Dimensions (W x D x H) 387 x 254 x 595 mm Specifications subject to change without notice. Factors such as compressor type and oil type must be taken into consideration when selecting AQUAMAT condensate treatment systems.

Condition: used, - Type: Professional deck oven - 5 decks × 3 chambers - 15 openings - Energy source: Triple fuel – gas/wood/diesel - Heating system: Annular tubes for uniform heat distribution - Usable depth: 2,200 mm Nodpfx Aszhk Rmefwelf - Condition: Almost new, used only for commissioning and ignition tests - Previous use: No commercial production, only technical tests - Structure: Full stainless steel, durable and easy to maintain - Cooking type: Stone hearth - Controls: Manual adjustment - Operating temperature: Up to 300°C - Insulation: High density, limiting heat loss and consumption - Overall dimensions: Large structure suitable for production workshops - Production capacity: Ideal for high-volume baking (bread, pizza, pastries, etc.) - Overall condition: Excellent

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. The oil drip tray is used for the storage of non-spillable or opened containers such as paint cans, paint buckets, cleaning agents, etc. The oil drip tray can be optimally placed in a shelf rack. The scope of delivery includes: 01x oil drip tray, II. choice (new goods) Manufacturer: SSI Schäfer Type: OAW 4800 Material color: sendzimir galvanized Capacity: approx. 60 liters load capacity: 200,00 kg total width: approx. 1.020 mm Usable width: approx. 970 mm Total depth: approx. 790 mm Nledpon Atm Djfx Afwef Usable depth: approx. 784 mm Total height: approx. 125 mm Useful height: approx. 95 mm Material thickness: approx. 3.00 mm Weight | pc.: approx. 26,960 kg Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a dispatch of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: used, Regoplas RT50 Thermo oil temperature control unit Thermo oil up to 300'C Nedpfxodmn E Ho Afwjlf

Condition: used, functionality: unexamined, Year of construction: 2004, Thermal Oil Heating System AURA Max. permissible pressure (bar): PS 10 Njdpfx Afsw Hxgvjwelf Max. permissible temperature (°C): TS 350 Min. permissible temperature (°C): TS 25 Volume (L): V 60 Medium: Thermal oil (Diphyl) Category: III The system is available twice, price per unit Note: The machine is still installed and can be inspected on site. The buyer is responsible for dismantling and organizing transport. This is not included in the offer price.

Condition: used, Flame heating device, Roland Groß + Söhne GmbH Ring burner for heating, for weld preheating, casting preheating, etc. Nljdpfjdz Spwjx Afwof Type 1 x 1" Ionization Manufacturer No. ALMA, Year of manufacture 03/20 Connection voltage: 230 volts Pe gas max.: 500 mbar Pe air max.: 10 bar Vgas max.: 30 Nm3/h Vair max.: 300 Nm3/h Includes 10 different flame ring nozzles - Flame monitoring, Hans Henning - Ring nozzle, foldable design consisting of 2 halves, inner diameter 310 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 400 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 490 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 500 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 590 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 800 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 990 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, arc length 1500 mm, with hose quick-connect coupling and ignition system, diffuser in the center For heating pipes and containers. For heating steel to welding temperature. Ideal for repair welding and manufacturing of welded components made of fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high-velocity flame spraying. Heating with gas for thermal spraying.

Condition: used, machine/vehicle number: LC657, Used ALFA LAVAL oil extraction plant 2000 Kg/hTechnical Specifications & Performance DataThis complete olive oil processing line combines proven Alfa Laval separation technology with robust malaxing and preparation equipment to deliver reliable, continuous extraction performance. It is a second hand, industrial processing solution designed to operate upstream of an edible oil bottling and industrial packaging system, making it a strong fit for producers who wish to integrate a used bottling line or expand their beverage production and food oil processing capacity.Hourly throughput: 20 ql/h (approx. 2,000 kg/h of olives)Core equipment: Olive elevator, hammer crusher, malaxer 1 section, malaxer 4 sections, decanter centrifuge, two disc-stack separatorsDecanter centrifuge: Alfa Laval Type LWX 207Bowl diameter (decanter): 355 mmMax solids density (decanter): 1.7 kg/dm3Max bowl speed (decanter): 4000 rpmSeparators: Alfa Laval model 407 (qty: 2)Malaxer (4 sections): SACMI, code 4/SMalaxer (1 section): Single-section unit for flexible batch managementPreparation: Olive elevator and hammer crusher for steady, uniform feed to malaxersAdvanced Automation & Control SystemsThe line is suitable for modernization with contemporary PLC/HMI architectures for recipe control, interlocks, and traceability. Individual machine controls can be consolidated into a central panel for streamlined operation, alarm handling, and start/stop sequencing across the preparation, malaxing, and separation stages. Safety interlocks and guarding can be integrated around rotating equipment and infeed areas for compliance and operator protection.Ready for integration with centralized PLC/HMI controlProvision for start/stop sequencing across crusher, malaxers, decanter, and separatorsEmergency-stop circuits and safety guarding recommended around rotating assembliesMain electrical switchboard to be provided by the buyer (not included)Production Line Integration CapabilitiesThis processing line is engineered to operate inline upstream of an edible oil bottling line. It interfaces seamlessly with downstream storage, filtration, and filling systems for retail or bulk packaging. Multiple malaxer sections provide format flexibility for varying batch sizes and olive characteristics, while the decanter and separators deliver continuous clarification suited to high-quality oil production.Machine type/categoryManufacturer / ModelYearOlive ElevatorAlfa LavalHammer CrusherAlfa Laval Nodpfx Aezmpzhjfwjlf

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 157, working width: 400 mm, overall weight: 2,200 kg, total width: 400 mm, For sale: a complete, used line for applying and curing oil/oil-wax on wooden floors (Soest + Prochera). I am selling a set of four machines that form a line for oil-waxing floorboards, used in a production facility for two-layer parquet in Krotoszyn. The line has not been used for approximately 3 months and has been regularly maintained and repaired during this time. The set includes: 1. SOEST RC-L-400 (Netherlands): application unit with a roller, serial number 157, year of manufacture 05/2017, total weight 580 kg, CE marking. 2. SOEST VP-400-2P-B (Netherlands): spreading/brushing unit (spreading oil, stain, or other coatings using pads and brushes), serial number 264, year of manufacture 05/2017, total weight 480 kg. 3. SOEST UV-3-400 (Netherlands): curing/drying unit, serial number 286, year of manufacture 04/2018, total weight 780 kg, CE marking. 4. PROCHERA SPL1-400C (Poland, Ziębice): brushing/polishing unit, no. 7, year of manufacture 2024, weight 355 kg, power 2 kW, CE marking. All units have a working width of 400 mm and are equipped with integrated conveyor belts and control/electrical cabinets. Total weight of the set: approx. 2,195 kg. Technical condition: unused for approx. 3 months, regularly maintained and repaired. Nodpfx Aezrm Ucjfwslf Price: PLN 182,500 net (negotiable), plus VAT. Note: the line is sold as used, in its current condition. Before purchasing, an on-site inspection and individual verification of suitability for a specific type of finish are recommended (e.g., UV oil vs. classic oil-wax cured by air).

Condition: used, Year of construction: 2006, SAACKE gas burner GLS 80 year 2006 6000 KW Further details and scope of delivery see photo. Technical data see type plate. Item condition: used, untested condition: used, untested Without OVP Without original packaging Example photos sample pictures A viewing in Wettringen is possible! For further questions you can contact us by email. The sale takes place exclusively to commercial interested parties for commercial purposes and under exclusion of any warranty for material defects and defects of title! With your purchase you confirm that you are working commercially or as a freelancer. Otherwise you violate our terms and conditions! Nedpfx Astzxn Hefwelf

Condition: new, Oil mist filters Donaldson DMC-MMB, 7 units available / Oil mist filter Absolent A.mist10 Nedpfx Afoy H Exfowolf

Year of construction: 1989, condition: good (used), functionality: fully functional, machine/vehicle number: 18678, Used 100,000-liter steel tank Year of manufacture: 1989 Located in 79423 Heitersheim Price is negotiable Nodozaquwspfx Afwslf

Year of construction: 2014, operating hours: 6,750 h, condition: good (used), fuel type: diesel, Nimos ECO-TRAC Weedcontrol / Weed Burner / Tool Carrier Yanmar Diesel 4WD 2014 Video can be provided via WhatsApp. Ongoing stock available, see website. Prices are ex Nuland. Van de Wert Trading B.V. offers a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without warranties. (see our general terms and conditions) You are welcome to make a non-binding appointment for a viewing and/or test drive. Please call ahead as we are not always present on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland Nsdpfszd Eybox Afwelf

Condition: excellent (used), Year of construction: 2016, For sale: a functioning and very well-maintained gas burner, brand WEISHAUPT WM-G20 (2600 kW), with a DUNGS DN65 gas manifold. 1. Nlodpjzamgcofx Afwsf WEISHAUPT WM - G30 (3800 kW); two units available. - Output: 400 - 3800 kW - Design: ZM-LN - Year of manufacture: 2016

Condition: excellent (used), Year of construction: 2010, 1. Gas burner WEISHAUPT WM-G30/2-A --- 4100 kW, with DUNGS gas train DN65 Nlsdpjwg Hkcsfx Afwsf Output: 450–4100 kW Version: ZM Year of manufacture: 2010 2. Gas burner WEISHAUPT G50/1-B - 4000 kW, with DUNGS gas train DN65 Output: 550–4000 kW Version: ZM-NR Year of manufacture: 2004

Condition: good (used), We are offering a BEKO Öwamat 4 here. Nlsdpjxtu Nksfx Afwjf Technical data and specifications: Subject to change without notice. Please contact us for a quote.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Heuft VTR model trolley/drive-in thermo-oil furnaces - 10 shelves, 2 trolleys, 60cm x 80cm (58cm x 78cm) sheets - furnaces after renovation - with a heating boiler - assembly Nedpfxev T Rkzo Afwelf - installation (Europe and beyond) - pipe insulation - transport - possible dismantling of old furnaces

Condition: used, Year of construction: 2008, functionality: fully functional, tank capacity: 35,568 l, usable tank capacity: 35,000 l, total length: 8,100 mm, total width: 2,800 mm, total height: 3,200 mm, inner diameter: 2,500 mm, outer diameter: 2,800 mm, Double-walled steel storage tank with two manholes and insulation, leak detection system. Nlsdezfqcdjpfx Afwjf

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF Nlsdpjy Iplfofx Afwjf 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility

Condition: new, - Hydraulic motor 80 cc - Shaft diameter: 25 mm - Connection for leakage oil line Nodpfswzgr Aex Afwjlf

Year of construction: 1998, condition: good (used), Through-flow spindle oil cooler Nledpsd Nmnusfx Afwjf Manufacturer: SCHMIPKE, Type: DK34-V/SO, Year of manufacture: 1998 Previously installed in a CNC machine. 2 units available. Price per unit. Dimensions: Length 1.4m, Width 0.5m, Height 1m, Weight approx. 250kg.

Year of construction: 2008, condition: as good as new (ex-display), 3 units, rectangular, insulated steel tanks mounted on double T-rails, with cooling/heating capabilities, manufactured in 2008 – used – (formerly palm oil storage tanks) Capacity approx. 45,400 liters Nledpfjd Tmcvjx Afwof Length approx. 12,000 mm Width approx. 2,400 mm Height approx. 2,900 mm On the tank roof: 1 manhole DN 600 1 socket 2“ 1 socket 3“ 1 outlet flange DN 160 1 socket ½“ Inlet and outlet for heating coil 2“ At the end face: 1 filling pipe DN 80 Insulation: 80 mm mineral wool Otherwise, see drawing + photos.

Condition: new, Efficient extraction of cooling and lubricating fluids directly at the machining center The two standard units, AL-KO OIL JET 600 and OIL JET 1200, are the ideal solution for direct extraction of oil and emulsion mist from all common turning, grinding, and milling machines. Application areas: AL-KO OIL JET units are used wherever oil and emulsion mist generated during the machining process needs to be directly extracted from the workspace of modern metal-cutting machines. Depending on workspace size, operating time, and the type of coolant used, either the OIL JET 600 or the more powerful OIL JET 1200 is selected. AL-KO OIL JET units are compatible with all standard coolants and lubricants and are installed directly onto the machine tool or positioned alongside on an optional mounting column. Functionality: The highly efficient filter system of AL-KO OIL JET units features, as standard, a three-stage filtration process that removes emulsion content and material particles from the extracted air. 1st stage: Washable metal mesh filter 2nd stage: Filter mat (LoTex®) with frame 3rd stage: Main filter cassette (ePM1 80%) The first stage separates coarse particles. The second stage, made from a nanocoated, drained mat, separates and channels away emulsion content. The third stage filters out the finest residual particles. Emulsion collected mainly in the second filter stage is gathered in the lower part of the unit and can be drained off. Applications: - Lathes - Machine tools - Metal-cutting machines Advantages: - Compact design - High separation efficiency thanks to three-stage filtration - Energy-efficient EC motors - Simple, tool-free filter replacement Njdpfxjwwt Tls Afwjlf - Numerous options