Used Burn Station for sale (5,483)

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Kodpfx Ansz Ai Tpjxjnb Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: excellent (used), Year of construction: 2024, 2024 Oturn CV500 5 Axis Machining Centre With Siemens One Control Knodpez Dg Dfjfx Anxeb Rotary Table Dimension Ø500 x 400mm (5 'T' Slots). Maximum Table Load 200kg. Axis Travel 'X'=700mm, 'Y'=600mm, 'Z'=500mm. Axis Rapid Feeds 'X'=36m/min, 'Y'=36m/min, 'Z'=36m/min, 'A'=60rpm, 'C'=60rpm. Cutting Feed Range 1-24,000mm/min. Spindle To Table Distance Min/Max 130-630mm. Distance From Spindle Centre To Column Guide Rail Surface 628mm. Maximum Spindle Speed 12,000rpm (22.5kW Motor). Spindle Taper BT 40. Maximum Tool Ø70/120mm (Non Adjacent Tool), Maximum Tool Length 300mm. Maximum Tool Weight 8kg. 24 Station ATC. Tool Change Time 4sec. Positioning Accuracy ±0.005/300mm, Repeatability ±0.003/300mm. S/No. MY0025-000027 (2024). This item will be loaded to buyer's vehicle, a loading charge of £200 + VAT will be added to the buyer's invoice. With Coolant System, Chip Conveyor, Renishaw Omi-2 Spindle Probe Interface, Renishaw TS27R Toolsetter, Water Chiller, Wash Gun, Air Gun, Handwheel Signal Tower & Swarf Bin. Overall Dimensions W2,884 x D2,612 x H3,303mm. Please note: This item will be loaded to buyer's vehicle, a loading charge of £200 + VAT will be added to the buyer's invoice.

Year of construction: 2019, condition: like new (used), 2 Quantity Antares Vision Matrix Stations - Top View Standalone module for off-line semi-automatic carton/bottle-to-case or bundle-to-case aggregation The Matrix Station Top View is a standalone aggregation module for off-line manual packaging operations. It is designed to allow Pharma Industries to establish a reliable and consistent hierarchical relationship “parent-child” throughout the composition of packaging from lower level to higher one, such as folding box/bottle to case or bundle to case. The operator inserts the individual packaging into the shipping carton layer by layer. Each completed level is photographed from above by a high resolution auto-focus camera through an automatic trigger. Dedicated software monitors the progress and when the number of units and layers is reached, a label is generated. The Matrix Top View is also able to handle higher aggregation levels, boxes on pallets. Aggregation station designed to maximize productivity in the manual packaging operations. Performs multiple reading from the top of the Datamatrix codes on cartons or bottles when fit into a case, managed as units or as aggregated bundles. The vision head is equipped with camera system and integrated LED lighting to read each layer of cartons during case composition. Knsdpfx Ajyb Tw Rsnxob AUTOMATIC FOCUS ADJUSTMENT FOR EACH CASE LAYER READING MULTIPLE READING WINDOW (mm): 600×420 ERGONOMIC DESIGN OPTION: TRANSPORTABLE ON WHEELS

Condition: good (used), Just Normlicht Proof Control Station Ideal as a control desk for a printing machine. 230V power supply Kedpfx Aeztn Uaonxenb 3 drawers + opening cabinet. Keyboard drawer. Electronic light control (luminous intensity).

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12349, Sack tip station / Bag dump station with dust collector powered by an integral fan with reverse jet filter cleaning of filtration cartridges. Knsdpjzf Nhfofx Anxjb

Condition: excellent (used), Year of construction: 2014, operating hours: 7,998 h, machine/vehicle number: 43610191, sheet thickness aluminum (max.): 6 mm, We are offering an Amada EML 3610NT punch laser combination machine for sale. The offered machine is used and in a very good condition. Main features of the machine (overall): - Possibility of combining punching and laser burning - automatic pick-up of details (suction cups for 45kg, small amount of perforation recommended) and exchange of pallets during the operation of the machine - automatic sheet feeding maximum length 3050x1500 and collection of residues after cutting, possibility of sheet loading during machine operation - automatic bale delivery 1500x400mm (two conveyor belts for details) - turning station with 41 fixed and 4 rotating stations - 3 manually adjustable paws - cutting elements on length 3020x1500 - Laser cutting length 2000x1500 - max. sheet thickness 6mm (due to brush table) - thread function - pneumatic hold-down device Accessories for the machine: - Light barrier - Thread cutting set - Sensor for bale chute - System for chip extraction - Separate lubrication of punching and threading tools - Bending sensors for sheet metal - A conveyor belt that pulls out the punching waste Machine data as of 17.09.2024 - Time of the running machine: 7998 hours - Operating time: 2972 hours - Cutting time: 1196 hours - Working time of the resonator: 6154 hours AMADA EML3610NT - Max. Cutting force: 300 kN - Power (laser efficiency): 4kW (CO2) - Type: EML-NT - No. 43610191 - Model:EML3610NT - Year of manufacture: 2014 November - Total value of the connection to the network: 400V/68.3 kVA - Connected load: 85 kVA - Compressed air connection: 8 bar; 48 m3/h - Width of the guarded area: 30m (max) - Minimum safety distance: 1.36 m - Response time of the machine + total response time of the firewall: 320ms - Stop time: 300 ms - Machine braking distance: 180mm - Weight of the punching/laser machine: 24,000 kg PRIII (reception of finished parts) - Model: PR III 300 L 2P - No.: 2424 - Year of construction: 2013 Kedpfxoum R T Ss Anxonb - Connection to the network: 400/50V/Hz - Max. Power supply: 8.5 kW - Compressed air connection: 6 bar 1000 l/min. - Dimensions and weight of the elements to be collected: Workpiece thickness from 0.5 to 3mm Min.150x150mm max. 2500x1000mm with a weight of no more than 45kg - Machine weight (PRIII): 4600 kg ASIII MP (sheet feeder) - Model: ASIII MP 300 - No.: 2994 - Year of construction: 2015 - Connection to the network: 400/50V/Hz - Max. Power supply: 12kW - Compressed air connection: 6 bar 1000 l/min. - Size of sheets that can be stored: Max. 3000x1500mm Minimum steel thickness 1000x300mm from 0.5 to 8mm Weight of a single sheet no more than 300kg - Machine weight (PRIII): 12 000 kg The price is for the entire machine only. The price does not include Tools, dismantling, transportation and commissioning If you have any further questions, please do not hesitate to contact us. The machine is offered in different sources. If you are interested, please confirm availability.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Knodpfxexqxt Is Anxob Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Year of construction: 2020, condition: good (used), Gough Engineering Sieving station and filtration unit Stainless, sieving station with WMF dust extraction unit, 555mm diameter mesh, 3Ph Knsdpfx Anjzvlk Dexeb

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, Paper punching machine (for creating perforations) for WIRE-O spiral binding. Knsdpfx Aszuzxhenxeb The device is designed for continuous operation and heavy-duty use. The machine has 2 tools for punching 3:1 holes, 4x4 mm square. After the holes are punched, the sheets fall onto a collecting table at the end of the machine. Quick and easy tool change (5 minutes). Maximum sheet size for punching: 550x500 mm, minimum 150x150 mm. Power supply: 1.5 kW, dimensions: 2800x1200x1250 mm, net weight: 950 kg. A video demonstrating the machine's operation can be sent upon request.

Condition: good (used), Year of construction: 2016, machine/vehicle number: 0000087, functionality: fully functional, operating hours: 2,202 h, power: 8,000 kW (10,876.96 HP), input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,550 mm, total length: 4,100 mm, total width: 780 mm, overall weight: 990 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Preliminary milling unit Edge banding glue station Capability to glue up to 60mm Feed rate 11m per min Control panel with temperature setting Kedpfxjzzcc Io Anxjnb Trimming of edge banding from a roll Guillotine for trimming edge banding from a roll Top/bottom milling unit with profiled milling cutters Polishing unit Year of manufacture 2016 Excellent condition

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 15,396 h, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, No minimum price – guaranteed sale to the highest bidder! TRUMPF TruBend 5170 including BendMaster! The machine has been continuously serviced and maintained by Trumpf, with a complete service record. The cylinders are leak-proof and have no oil loss. The tools shown for the robot are included. TECHNICAL DETAILS Stroke: 500 mm Press force: 1,700 kN Working length: 4,250 mm Tool clamping: Hydraulic, top and bottom Number of axes: 6 Load capacity: 60 kg MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Frequency: 50 Hz Connected power: 28.0 kVA Control voltage: 24 V DC Follow-up time: max. 90 ms Follow-up distance at 220 mm/s: max. 10 mm Follow-up distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg Operating hours Press beam running time: 15,396 h Hydraulic system running time: 83,212 h Machine operating hours: 152,638 h Knsdpszzkvcofx Anxsb EQUIPMENT CE marking Documentation/Manual Rear stop with sensors CNC crowning Bendmaster (robot with 8 m travel) Vacuum manipulators CNC gripping station Double sheet detection BendGuard laser safety device Spare parts: Cable carrier, spare vacuum plate, BWF fixators (machine feet) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If collection is not completed within the specified timeframe, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on-site before the end of the auction.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Used Blue Mac 2510 Static Trommel Kjdszzrwbopfx Anxenb Year 2016 10 M Long x 2.5 M Diameter 50mm Round Holes, 8mm Thick All New Drive Shafts & Wheels 4 x 5.5kW Electric Motors / Bonfiglioli Gearboxes 21 Tonne Weight Excellent Condition Ready To Go To Work

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,416 h, functionality: fully functional, turning diameter over cross slide: 950 mm, turning length: 4,000 mm, turning diameter: 950 mm, spindle bore: 254 mm, spindle speed (max.): 630 rpm, spindle speed (min.): 2 rpm, travel distance Z-axis: 4,000 mm, Hankook Protec 9NC Hollow Spindle Oil Country Lathe Model: Protec 9NC Control: Fanuc 21i-TB Year: 2010 Spindle Bore: 254mm Capacity: 950 x 4000mm Knedpozzq Sqjfx Anxeb Swing Over Cross Slide: 630mm Spindle Speeds: To 630 RPM (2 Ranges) Main Motor: 37 KW Machine With: Double 4 Jaw Manual Chucks (front or rear) Duplomatic 8 Station Turret 2 x Fixed Steadies

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, We are offering this ready-to-use Cask 3 Head Fill Station filling technology, manufactured in 2023. Number of filling heads: 3 Filling capacity: 25 cans/minute Kodpfx Aozzmfaonxjnb Hourly capacity: 63 cases/hour Dissolved oxygen level: 15 - 20 ppb Footprint dimensions: 7’ x 2.5’ Footprint area: 17.5 ft² If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2023, Maximum turning diameter 220mm, Ksdpoz D Eupsfx Anxsnb distance between centres 800mm, swing over bed 240mm, spindle speed 4,000rpm, milling speed 12,000rpm, sub-spindle speed 4,000rpm, main spindle bar capacity 66mm, sub spindle bar capacity 66mm, 2 X 12 station turrets, spindle power 35Kw, Y axis + /- 45mm, swarf conveyor, coolant., Fanuc 31i.

Condition: used, KMA Heat Exchanger and Pumping Station Knedpoym Dx Ajfx Anxjb

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: RC 14-43, power: 810 kW (1,101.29 HP), GLASTON RC200 2136-380-R - Tempering furnace, 2100 x 3600 mm Knjdpfx Asz D Ic Nonxob Group: Tempering - With convection (Low-e) Process: Tempering furnace, 2100 x 3600 mm Code: 90010x7 Manufacturer: GLASTON Model: RC200 2136-380-R Year of manufacture: 2014 Condition: As is Tempering furnace - Maximum glass size: 2100 x 3600 mm - Minimum glass size: 100 x 250 mm - Glass thickness: 4 - 19 mm - Total power: 810 kW - Vortex Plus convection system (top) - Technical description can be found in the appendix as technical data - In good working condition, still in operation - In very good and clean condition - As is - Immediately available Dismantling and installation can be carried out by our service team upon request.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: E1361000, overall weight: 600 kg, load capacity: 8 kg, arm reach: 2,028 mm, pivoting range: 360 °, controller manufacturer: Fanuc, controller model: R-30iB Plus, teach pendant manufacturer: Fanuc, teach pendant model: Fanuc A05B-2256-C101#EGN, control cabinet width: 600 mm, control cabinet height: 600 mm, input voltage: 400 V, input current: 32 A, type of input current: three-phase, welding current (max.): 400 A, Equipment: documentation/manual, Fully functional and in excellent condition robot welding cell. Fanuc arm and 2-axis positioner, Fronius powersource, wire feeding and push-pull torch. FANUC ARC Mate AM-100iC/8L robot R-30iB Plus controller FANUC 2-axis postitioner A05B-1220-J201-N, payload 500kg Fronius TPS 400i powersource with PMC package Kjdpfozu Irnjx Anxjnb Thielmanni nozzle cleaner SICK curtains Installed 2021 Robot station is fully operational, in good condition and can be seen in use.

Condition: good (used), Year of construction: 2014, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1000rpm spindle, Knedpfx Ajz D Axfjnxsb Spindle bore 275mm, 10 station turret 45kW spindle motor, FANUC Series 32i control, 24” 3 Jaw manual Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: good (used), Year of construction: 2012, 370mm max. machining diameter, 651mm swing over bed, 461mm swing over cross-slide, Knedpoz D Ayvsfx Anxeb 712mm max turned length, 3500rpm spindle, 76mm bar capacity, 12 station turret, 15kW spindle motor, FANUC Oi control, 3 jaw chuck , C axis & Milling, Tool presetter, Tailstock, coolant, swarf conveyor.

Condition: like new (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, nominal power (apparent): 61 kVA, torque: 1,675 Nm, controller manufacturer: FANUC, controller model: 18iMB, workpiece weight (max.): 1,200 kg, table width: 630 mm, table length: 630 mm, spindle speed (max.): 6,000 rpm, distance table to spindle center: 875 mm, distance table center to spindle nose: 1,000 mm, spindle nose: ISO #50 7/24 Taper, number of spindles: 1, number of slots in tool magazine: 40, ACE-HM630 – Specifications Knedpfxsx Ad Nls Anxjb Travel X-axis (table longitudinal travel): 1,000 mm Y-axis (head vertical travel): 800 mm Z-axis (column cross travel): 850 mm Distance from spindle center to pallet top: 75–875 mm Distance from spindle nose to table center: 150–1,000 mm Table Pallet type: 24-M16 × P2.0 Tap Indexing degree: 0.001° Table loading capacity: 1,200 kg Pallet size: 630 × 630 mm Spindle Max spindle speed: 6,000 rpm Spindle taper: ISO #50 7/24 Taper Max spindle torque: 1,675.8 N·m Feedrate Rapid traverse (X/Y/Z): 24 m/min Cutting feedrate: 1–12,000 mm/min Automatic Tool Changer Tool shank: MAS 403 BT50 (DIN, CAT) Tool storage capacity: 40 Max tool diameter: 135 mm Max tool diameter (without adjacent tools): 250 mm Max tool length: 400 mm Max tool weight: 25 kg Max tool moment: 34.3 N·m Tool selection method: Fixed address Tool changing time (tool-to-tool): 2.5 sec Tool changing time (chip-to-chip): 8.5 sec Automatic Pallet Changer Number of pallets: 2 Type: Rotary Pallet change time: 25 sec Pallet rotation in loading station: 90° index Power Source Electrical power supply (rated capacity): 60.7 kVA Compressed air supply: 0.54 MPa Tank Capacity Coolant tank: 550 L Lubrication tank: 4.3 L Machine Size Machine height: 3,041 mm Machine dimensions (L × W): 6,485 × 3,857 mm Machine weight: 18,000 kg

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Wire-O Binding automatic paper punching machine for A4 & A5 sheets. Maximum Sheet Size 360mm x 330mm Minimum Sheet Size 138mm x 138mm Paper Stocks 50gsm up to 350gsm Punching Up to 30,000 – 40,000 sheets per hour Sheet Lift Adjustable from .5mm to 1mm Power Requirements 230v single phase 50 Hz Other styles available: ie Coil Binding - Comb Binding - File Punching - Spiral Binding. (POA) Knodjtx Ux Repfx Anxeb

Condition: good (used), Year of construction: 2007, swing over cross-slide 935mm, swing over cross-slide 738mm, Maximum cutting diameter 620mm, Maximum cutting length 2158mm, Bar capacity 130mm, Spindle speed 2,400rpm, Main spindle power 30 Kw, 12 station turret. Knjdpfxoz D H Nue Anxjb Mori Control M730BM, swarf conveyor, 3 jaw chuck, fixed steady.

Condition: used, Year of construction: 2017, operating hours: 24,500 h, total length: 2,250 mm, total height: 1,450 mm, total width: 1,250 mm, overall weight: 750 kg, input voltage: 400 V, input current: 30 A, HP Jet Fusion 3D 4200 – 2017 | Fully Maintained | Complete System HP Jet Fusion 3D 4200 industrial 3D printing system, manufactured in 2017. The machine has been fully maintained by HP. Last print was run on 17/07/26. Manufacturer: HP Model: Jet Fusion 3D 4200 Manufactured: 2017 Technology: HP Multi Jet Fusion (MJF) Condition: Used Maintenance: Fully maintained by HP Build volume: 380 × 284 × 380 mm Layer thickness: 80 microns Included: HP Processing Station Build Units: 2 × HP Jet Fusion 3D Build Units Printer can be viewed. Location: Available for inspection by appointment. System Includes HP Jet Fusion 3D 4200 Printer HP Processing Station with fast cool. 2 × Build Units Sold ex-works. The printer and associated equipment are sold from their current location. The buyer is solely responsible for dismantling, removal, loading, transportation, shipping and installation at the destination. The buyer is also responsible for arranging any specialist lifting, transport or installation requirements. Buyers are strongly encouraged to inspect the equipment and assess access, lifting and transportation requirements before purchase. The HP service contract has EXPIRED. The buyer will need to arrange service and recertification on relocation. That cost is not included in our price. Ksdpezx U Ikjfx Anxenb

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 240 kg, total length: 1,213 mm, total width: 804 mm, total height: 1,856 mm, The ibg eddyrobot is a modular, semi-automatic system for eddy current crack and grinder burn detection. Equipped with the eddyvisor C and supporting up to four interchangeable ET probes, it delivers industrial-grade accuracy and flexibility. Its compact and mobile design makes it ideal for use on production floors, in laboratories, or for standalone inspection tasks. Key safety features include an electromechanical lock and emergency stop to ensure operator protection. The user-friendly interface enables straightforward operation, while the integrated ibg eddyvisor C with differential crack test probe provides precise and reliable inspection results. The system also features a flexible probe station that stores up to four ET probes, allowing for automatic probe changes via the robotic arm. Knedpfx Asy H Dfdsnxsb At the core of the system is a Mecademic Meca 500 six-axis industrial robot featuring ±5 µm repeatability, ensuring consistent and repeatable test procedures. The entire unit is managed by a Beckhoff PLC. For mobility, the eddyrobot is mounted on 100 mm rubber wheels (two of which are lockable), and includes a handle and corner protection. Its compact footprint allows easy passage through standard doorways. For more information, please visit our website.