Used Okuma Lb 12 for sale (217)

Condition: good (used), Year of construction: 2005, functionality: fully functional, The machine was serviced annually under a maintenance contract with Okuma. Okuma Mac Turn 550 W / 9-axis turning-milling center Year of manufacture: 2005, Control system: OSP-E 100 L / Expansion Kit “M” Kit One Touch IGF Milling spindle carriage X/Y/Z/B, Counter spindle W-axis, Main spindle with C-axis, Counter spindle with C-axis, Turret carriage below X/Z axis, Max. turning diameter: 720 mm, Turning length: 2,000 mm, Distance between tailstock center and spindle center: 2,505 mm, Y-axis: 250 mm / +/- 125 mm, Main spindle speed: up to 3,500 rpm, Spindle power: 30 kW Turret below: 12-station without driven tool stations, Nco Dmnbyeyt Nvtoujt Turret below with steady rest, therefore only 9 stations instead of 12, Self-centering steady rest: 35 - 240 mm, Milling spindle: infinitely variable B-axis 0.001°, Magazine: 80-station, Mount: HSK 100, New Forkhart three-jaw chuck Ø 400 mm, value 12,000 €, Counter spindle without chuck, currently with arbors / delivery without arbors, Enlarged main spindle: 110 mm Ø 150/110 mm, Spindle nose: Size 11, 2-stage clamping pressure, Counter spindle as a hollow shaft motor, speed up to 3,800 rpm, Ethernet LAN interface, Renishaw in-process measurement, Additional measuring system for Y-axis, Tool length: 450 mm instead of 350 mm, Door automation for both doors, Chip conveyor, Gravity belt filter with clean tank 900 liters, Supply pump, frequency-controlled up to 20 bar, The machine was serviced annually under a maintenance contract with Okuma. In 2023, the cable carrier for the W-axis, including all hoses, was replaced. In October 2024, the linear guides X/Y/Z were replaced. Work performed by Okuma. Machine cleaned. Sheets and covers removed. 8th axis removed. Travel stand removed and lifted out of the machine. ATC removed and lifted out of the machine. All linear guides removed. Mounting surfaces of the Z-axis cleaned. New linear guide for Z-axis including shoes installed and tightened with the specified torques. New ball screw for Z-axis including bearing mounted and installed. Crjdpfjy Uhfkjx Al Njc Base plate of the travel stand installed and tightened with the specified torques or screwed onto the shoes. Lubrication lines connected. ATC including attachments installed and connected. New linear guides YA and XA installed and tightened with the corresponding torques. New ball screw YA including bearing installed. Travel stand installed and lubrication lines connected. Base plate XA placed and aligned. 8th axis placed and aligned. H1 turret installed - Install drive motor for the 8th axis - Assembly of 8th axis + new H1 and adjust geometry - Functional test of 8th axis and H1 - Run-in program for B-axis approx. 12 hours, then drain old oil from the 8th axis - Run-in program for H1 and create defect report for OEG - Install left door, adjust various sheets - Install chuck - Adjust zero points - Check tool change

Condition: good (used), Year of construction: 2004, functionality: fully functional, CNC turning and milling center with 9 CNC axes, Okuma MacTurn 350 W, Year of manufacture 2004, Crjdpsy Uhccofx Al Noc OSP-E 100L, Additional magazine, Magazine with 80 tool positions, Main spindle with C axis, Counter spindle with C axis, Y-axis slide above / milling spindle, HSK 63 tool holder, Infinitely adjustable B-axis as milling spindle, Distance between centers 1500 mm, Spindle bore 80 mm, Max. turning diameter 550 mm, Turning diameter 350 mm, Lower turret with 12 tool positions and powered tools, Interlite compact filter system 900 l, Extraction system, Spindle running time approximately 18,300 hours, Chip conveyor, Tool changer gripper arm completely renewed, High-pressure cooling, WZG measuring arm, Tool changer overhauled, Main spindle Kitagawa B - 210, Counter spindle Kitagawa B - 208.

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 220 mm, travel distance Z-axis: 300 mm, spindle motor power: 15,000 W, spindle speed (max.): 4,000 rpm, total height: 2,650 mm, overall weight: 5,000 kg, number of axes: 2, Vertical turning machine manufactured in 2004. This Okuma LVT300 features a maximum turning diameter of 280 mm and a turning length of 200 mm. It includes a spindle speed range of 60–4,000 rpm and a turret with 12 stations for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the Okuma LVT300 machine we have for sale. Contact us for further details. • X-axis rapid traverse: 30,000 mm/min • Z-axis rapid traverse: 30,000 mm/min • Max. turning diameter: ϕ 280 mm • Max. turning length: 200 mm • Turret stations: 12 • Rotary tool speed (M model): 45–4,500 rpm Credpfx Aljy Shiqo Nec • Floor space: 1,400 x 3,180 mm Technical Specification Driven Tools Yes

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, Machine type: Horizontal machining center Manufacturer: OKUMA Type: MA-400HA Year of manufacture: 2008 Control system: OSP P200M Country of origin: Japan Delivery time: short-term, by arrangement 4-axis machining center, high productivity, including various accessories Machine equipment: - ConSep chip conveyor system with high-pressure pump - Various software packages Crjdpfx Aley Tvrvo Njc - Touchsetter with length measurement and breakage detection - Work area shower Technical details: - Travels - Axes X-axis (column right-left) mm 560 Z-axis (table forward-backward) mm 625 Y-axis (spindle up-down) mm 610 B-axis 1° 0 - 360° - Number of pallets: 2 (pallet changer for 2 pallets) - Pallet size (mm): 400 x 400 - Max. pallet load capacity (kg): 400 - Max. pallet workpiece dimensions (mm): 500/600 x 710 - Spindle speed (rpm): 15,000 - Main spindle (10min/cont): 22/18.5 kW - Tool holder: BT40 - Tool magazine: 60 positions Optional: - Transport organization and execution - Machine delivery and installation - Machine commissioning

Condition: used, Year of construction: 2000, x-travel 1.050 mm Cjdpfx Ajy Rakkol Nerc y-travel 560 mm z-travel 450 mm Control OKUMA OSP-U100M-H table dimensions 1.300 x 560 mm spindle tunring speed 10.000 U/min tool taper BT 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 2011, spindle speed (max.): 4,500 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 380 mm, controller manufacturer: OKUMA, controller model: OSP‑P200LA‑R, number of axes: 3, This 3-axis Okuma GENOS L200E-M was manufactured in 2011. It features a maximum turning diameter of 200 mm and a Z-axis travel of 380 mm. The machine is equipped with a 12-station turret with driven tools, allowing for milling and drilling on the C-axis. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L200E-M horizontal turning center we have for sale. Contact us for further details. • Turning configuration: 2 axes (X, Z) + C‑axis; no Y‑axis • Tailstock: Equipped • Tool presetter: Automatic tool presetter installed • Turret: 12‑station turret with driven tools (milling and drilling on C‑axis) • Max. turning diameter: 200 mm • Spindle nose: ASA A2‑6 Crjdjy Rrwvjpfx Al Nec • Spindle bore diameter: approx. 50 mm • Electrical supply: 380 V, 3‑phase, 50/60 Hz • Average apparent power: 17.7 kVA • Full‑load current: 26.7 A • Max. motor current draw: 45 A Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2007, operating hours: 20,000 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, nominal power (apparent): 49 kVA, controller manufacturer: Okuma, controller model: OSP-P200M, table width: 400 mm, table length: 400 mm, table load: 400 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 58,000 h, coolant supply: 30 bar, spindle motor power: 22,000 W, spindle nose: SK40 Big Plus, number of spindles: 1, number of slots in tool magazine: 100, input voltage: 400 V, type of input current: three-phase, pallet changer: automatic, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Well-maintained 3-axis Okuma MA-400HA horizontal machining center for sale The Z-axis module requires an overhaul. If more than 30% of the maximum rapid traverse speed is selected, the axis does not move. The machine is still in daily production and can be inspected at any time. The machine is offered including: - 100 SK tool holders (without tools) included - Renishaw OMP60 measuring system incl. probe and module (for tool breakage control and tool length measurement via mechanical touch sensor) - Expanded control options (larger storage for offsets, tool corrections, axis mirroring, manual measurement, scaling up/down) - DNC-DT interface - 30 bar through-spindle coolant supply Crsdpfx Aleyvga Us Njc - 6 pallets incl. fixtures for machining round parts. Smallest fixture diameter 160mm, largest fixture diameter 370mm - Mayfran Consep 2000 II chip conveyor including nonwoven-free coolant filtration system

Condition: used, Year of construction: 2014, Technical details: x-travel: 760 mm Csdpfx Alsxrwpds Nsrc y-travel: 760 mm z-travel: 760 mm total power requirement: 43 kW weight of the machine ca.: 11,5 t dimensions of the machine ca.: 2,7 x 4,73 x 2,87 m max. table loading capacity: 500 kg

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 260 mm, travel distance Z-axis: 1,020 mm, controller manufacturer: OKUMA, number of axes: 4, This 4-axis Okuma LU15 M-2SC 1000 was manufactured in 1998. It features two tool turrets, live tooling with C-axis capabilities, and synchronous tapping for enhanced productivity. The machine includes an integrated tool setter for precise measurements and a programmable tailstock for versatility. If you are looking to get high-quality turning capabilities, consider the Okuma LU15 M-2SC 1000 horizontal turning machine we have for sale. Contact us for further details. • Longitudinal Travel (X): 1020 / 995 mm • Cross Travel (Z): 260 / 140 mm • Turning Range: 340 mm • Swing Diameter over Bed Cover: 530 mm • Swing Diameter over Cross Slide: 380 mm • Spindle Nose: ASA-A2 / DIN 55026 Gr. 6 • Spindle Bore: 62 mm • Spindle Diameter in Front Bearing: 100 mm • Chuck Diameter: 200 mm • Main Drive: Motor spindle (hollow shaft motor) frequency-regulated 60% ED • Power (Main Drive): 22 kW • Max Torque: 412 Nm • Speed Range: 45 - 4,500 rpm • Speed Levels (Electrical): 2 Csdsy Nmi Dopfx Al Nsrc • Feed Drive: AC servo motors, digitally regulated • Feed Range X/Z: 0 - 1,000 mm/U • Rapid Traverse X/Z: 15 / 20 m/min • Power X, Z: 2.4/1.5 kW and 4/4 kW • Feed Force X, Z: 11/3.7 kN and 7/6.7 kN • Turrets: 2 tool turrets • Live tooling: Yes (C-axis and driven units) • Tapping: Synchronous tapping • Spindle interpolation: Automatic main spindle interpolation • Tool monitoring: Wear and breakage monitoring • Tool measurement: Integrated tool setter / measuring device • Tailstock: Programmable, towable with bed slide, automatic clamping • Tailstock quill: Controllable via M-command • Draw tube bore: 55 mm (partial hollow clamping cylinder) • Interface: DNC Interface RS-232C • Cooling system: Reinforced pump (8 bar at 30 l/min) • Programming: ONE TOUCH Dialog-NC (automatic work plan generation) Additional equipment • Chip conveyor (1,200 mm discharge height) Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 1,500 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, controller manufacturer: OKUMA, controller model: OSP-P300M, table load: 1,500 kg, overall weight: 9,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 30,000 W, number of slots in tool magazine: 32, number of axes: 3, This 3-axis Okuma MB-66VA was manufactured in 2013. It features an X-axis travel of 1500 mm, Y-axis travel of 660 mm, and Z-axis travel of 660 mm. The machine is equipped with a powerful 30 kW spindle, capable of reaching speeds up to 15,000 rpm, and has a tool magazine with 32 positions. If you are looking to get high-quality machining capabilities, consider the Okuma MB-66VA vertical machining centre we have for sale. Contact us for further details. • Table size: 1500 × 660 mm Technical Specification Taper Size BT 50 Credpfx Ajy Ndp Iel Nec

Condition: ready for operation (used), Year of construction: 2016, operating hours: 23,563 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP-P300M, table load: 900 kg, overall weight: 7,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 32, number of axes: 3, This 3-axis Okuma M560-V was manufactured in 2016. It features a generous X-axis travel of 1050 mm, Y-axis travel of 560 mm, and Z-axis travel of 460 mm. The machine is equipped with a powerful 22 kW spindle and a tool magazine that holds 32 tools. If you are looking to get high-quality machining capabilities, consider the Okuma M560-V vertical machining centre we have for sale. Contact us for further details. Codjy Nb T Dspfx Al Nerc • Table size: 1300 × 560 mm

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP-P200M, table load: 800 kg, overall weight: 6,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 20, number of axes: 3, This 3-axis Okuma M460R-VE vertical machining centre was manufactured in 2013. It features a robust X-axis travel of 762 mm, Y-axis travel of 460 mm, and Z-axis travel of 460 mm. The machine is equipped with a powerful 15 kW spindle that can reach speeds of up to 15,000 rpm, along with a tool magazine capacity of 20. If you are looking to get high-quality machining capabilities, consider the Okuma M460R-VE machine we have for sale. Contact us for further details. • Table size: 1000 × 460 mm Technical Specification Taper Size BT 40 Codoy Nb Nxopfx Al Njrc

Condition: ready for operation (used), Year of construction: 2014, operating hours: 23,723 h, spindle speed (max.): 3,800 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,140 mm, spindle motor power: 22,000 W, overall weight: 6,000 kg, controller manufacturer: OKUMA, controller model: OSP-P300, number of axes: 3, This 3-axis Okuma Genos L300 E-M was manufactured in 2014. It features a maximum turning diameter of 300 mm and a turning length of up to 1000 mm. The machine is equipped with a spindle speed of up to 3800 rpm and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma Genos L300 E-M CNC lathe we have for sale. Contact us for further details. • Chuck size: 203 mm • Max. turning diameter: 300 mm • Max. turning length: 450–520 mm (up to 1000 mm optional) • Z-axis travel: 450–1140 mm • Spindle bore: 65 mm • Turret: 12 stations • Tool type/interface: VDI / BMT • C-axis: Yes Cjdpfx Ajy I Uu Eel Norc Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2000, max. 800 mm turning length max. 800 mm chuck ohne documentation inkl. control Okuma OSP turning speed range 10-2800 U/min bar material dia. ca. 91 mm spindle nose A2-8 output 44 kw chucking diameter ca. 450 mm 12 Fach tail stock ca 150 mm weight of the machine ca. 8 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Crsdpoh D Anaofx Al Nec Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, Used Okuma MA-600HB Horizontal Machining Center Year: 2008 Spindle cooling Max. 6000 rpm Z- 810 mm X- 1000 mm Y- 900 mm Tool magazine for 150 tools 1 spindle 4 axes 10-pallet system Csdpfx Aljyrf I As Nsrc We have 2 units available. Price is per unit, ex location.

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, Used Okuma MA-600 HB horizontal machining center, year 2008, including turncut function, spindle cooling, 6000 rpm. Travels: Z-810 mm, X-1000 mm, Y-900 mm. Tool magazine for 150 tools, 1 spindle, 4 axes, 6-pallet changer function. Credpfeywicvex Al Nsc

Condition: excellent (used), Year of construction: 2015, Okuma GENOS L200E-MY CNC Lathe Technical Data Manufacturer: Okuma Model: GENOS L200E-MY Control: OSP-P300L-R Voltage: 400 V Phases: 3 P Frequency: 50/60 Hz Connected load: 15.3 kVA Rated current: 25.6 A Short-circuit withstand capacity: 2.5 kA Max. turning diameter: Ø 200 mm Max. turning diameter x length: Ø 200 x 380 mm Swing over bed: Ø 450 mm Swing over cross slide: Ø 300 mm Codpey R A N Aofx Al Nsrc Workpiece weight (single-sided support): 120 kg Spindle diameter: Ø 100 mm Spindle nose: JIS A2-6 Spindle bore: Ø 66 mm Spindle speed range: stepless Spindle speed: 75 to 3000 rpm Number of tool stations: 12 Turret type: Multitasking V12 turret Tool holder, external turning tools: 20 x 20 mm Tool holder, internal turning tools: Ø 32 mm Rotating tool speed: 6000 rpm Travel (Z-axis): 400 mm Travel (X-axis): 165 mm Travel (Y-axis): 80 mm Feed range: 0.001 to 1000 mm/rev Rapid traverse Z-axis: 25000 mm/min Rapid traverse X-axis: 20000 mm/min Rapid traverse Y-axis: 10000 mm/min Tailstock quill diameter: Ø 55 mm Tailstock quill stroke: 80 mm Machine height: 2040 mm Footprint: 2120 x 1750 mm Machine weight: 4800 kg Year of manufacture: 2015 No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Condition: good (used), center height: 215 mm, grinding length: 1,500 mm, total width: 2,300 mm, total length: 5,530 mm, total height: 2,100 mm, grinding diameter: 430 mm, Matrix Okuma Universal Cylindrical Grinder Cjdpfx Aoyglhfsl Njrc Model: GU – 40 Max Dia Ground: 430mm Max Between Centres: 1500mm Wheel Size: 355 x 50 x 127mm Headstock Speed: 10-150 RPM Variable Table Swivels: 8 Degree Machine With: Coolant Filtration Tank Steadies Internal Grinding Attachment with Quill Dimensions: 5530 x 2300 x 2100mm High Weight: 6200 Kgs

Condition: ready for operation (used), Year of construction: 2011, operating hours: 18,533 h, functionality: fully functional, machine/vehicle number: PA158, turning length: 450 mm, turning diameter: 300 mm, workpiece weight (max.): 9 kg, workpiece length (max.): 150 mm, workpiece diameter (max.): 225 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 450 mm Turning diameter: 300 mm Workpiece diameter max.: 225 mm Workpiece length max.: 150 mm Workpiece weight max.: 9 kg MACHINE DETAILS Operating hours: 18,533 h Rated voltage: 380 V Number of phases: 3 Frequency: 50/60 Hz Maximum power consumption: 22.9 kVA Total current consumption: 34.8 A Motor current consumption max.: 72 A Short-circuit power data / current interruption at: 15 kA Credpfxjy R Uy He Al Noc Dimensions & Weight Space requirement (L x W x H): approx. 2,550 x 2,150 x 2,100 mm Machine weight: approx. 4,900 kg Note: Since other machines need to be moved to allow for loading, the stated disassembly and loading costs apply.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1938, turning length: 850 mm, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, workpiece length (max.): 850 mm, workpiece diameter (max.): 300 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 850 mm Turning diameter: 340 mm Spindle speed max.: 4,500 rpm Workpiece diameter max.: 300 mm Workpiece length max.: 850 mm Workpiece clamping: 3-jaw chuck, Kitagawa B-210 MACHINE DETAILS Control system: Okuma OSP 7000L Power max.: 22 kW Rated voltage: 400 V Number of phases: 3 Frequency: 50 Hz Power consumption max.: 30.1 kVA Total current consumption: 43.4 A Motor current consumption max.: 106 A Current interruption at: 10 kA Crjdpfxsy R Uxij Al Nec Note: Since other machines need to be moved to allow for loading, the stated disassembly and loading costs apply.

Year of construction: 2007, condition: excellent (used), X AXIS: 762 MM Y AXIS: 560 MM Z AXIS: 460 MM SPINDLE SPEED: 15,000 RPM SPINDLE CONE: BT 40 TABLE DIMENSION: 460 X 760 MM MAXIMUM LOAD: 400 KG RAPID FEEDS X/Y AXIS: 40,000 MM/MIN Z AXIS RAPID FEEDS: 32,000 MM/MIN WORKING FEED: 32,000 MM/MIN TOOL WAREHOUSE: 20 PLACES TOOL CHANGE TIME: 1.2 SEC – 3.8 SEC MAXIMUM TOOL WEIGHT: 8 KG MAXIMUM TOOL LENGTH: 300 MM Crsdpfx Aopyg Rksl Nsc CONTROL: OSP-P200M

Condition: excellent (used), Year of construction: 2013, operating hours: 5,785 h, Okuma Genos L300e-MY turning center Year: 2013 Codpfx Alszat Tve Nsrc Technical details: Control OSP P300L-R Turning diameter 340 mm Turning length 1020 mm Spindle bore diameter 65 mm Spindle Speed 25 - 3000 1/min Spindle motor 15/11 kW Movement X-axis 235 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1074 mm Minimum indexing C-Axis main Spindle 0,001 ° Number of tools on turret 12 Spindle speed driven tools 45 - 4500 1/min Number of driven tools 12 position Tool Taper VDI40 Spindle motor driven tools 7/3,3 kW Bar feeder SPACESAVER 2210 ( 1500 mm bar lenght, up to 67 mm diameter ) Machine dimensions 4370x2540x2490 mm Weight 7500 kg Accessories/options: - SPACESAVER 2210 barfeeder - swarf conveyor - parts cather - Renishaw tool measuring arm - Driven tool holders - Static tool holders - Hydraulic chuck - Jaws for chuck - Documentations - Dust extractor

Condition: ready for operation (used), Year of construction: 2013, This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Dimensions of machine (lxwxh): 2500 mm x 6600 mm x 6350 mm / weight (kg): 59000 kg • Max workpiece width: 2540 mm / max workpiece length: 5540 mm • Table size (width × length): 2500 mm × 6300 mm /max load on table: 30000 kg table height from floor: 850 mm /effective width between columns: 3050 mm/ t-slot (width × number): 24h7 × 13 • Cutting feed rate: 1 to 10000 mm/min/ rapid feed rate: 20000 mm/min/ table movement x-axis: 6500 mm /x-axis travel: 6500 mm /y-axis travel: 3500 mm/ z-axis travel: 650 mm • Tool holder: bt50 + masz type/ tool storage capacity: 50 tools /max tool length: 300 mm Crjdpfx Asx D S Ekjl Njc • Power supply: 400v, 3 /phases, 50hz rated capacity: 513 kva /full load current: 741 a /peak current: 117/138 a /short circuit current: 18 ka • Spindle diameter: 100 mm /spindle speed: 30 to 4000 min⁻¹ • Large table size suitable for heavy loads. /extensive tool storage capacity. /high rapid feed rate for efficient operations.

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: 01224, turning diameter over cross slide: 520 mm, turning length: 750 mm, turning diameter: 380 mm, spindle bore: 60 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 20 rpm, overall weight: 5,000 kg, bar diameter (max.): 60 mm, Equipment: documentation/manual, rotational speed infinitely variable, CNC control Fanuc 10 TF Turning diameter: 380 mm Swing over bed: 520 mm Turning length: 750 mm Turret: 12 stations Spindle speeds: 20 - 3500 rpm Chuck incl. hard and soft jaws Crjdpfsy Irfzsx Al Nsc Tailstock Including various toolholders Monitor new: flat screen Year of manufacture: 1987 Machine under power. Data sheet, documentation and manuals available Data transfer possible with laptop.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Manufacturer: OKUMA Type: LC 40 Year of construction: 2002 Type of control: CNC Control: FANUC 18-i TB Storage location: Halberstadt Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Chuck diameter: 450 mm Tailstock - diameter: 120 mm Turning Diameter: 550 mm Turning Length: 800 mm Credpsy Ed Ayjfx Al Njc Swing Diameter: 800 mm Spindle passage: 90 mm Spindle nose: A2-8 Tailstock Quill Stroke: 150 mm Total Power Requirement: 44 kW Weight Of The Machine Ca.: 8 t Number of tool stations: 12 pc