Used Okuma Lc 30 for sale (171)

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Manufacturer: OKUMA Type: LC 40 Gksdexc Trcjpfx Ag Noc Year of construction: 2002 Type of control: CNC Control: FANUC 18-i TB Storage location: Halberstadt Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Chuck diameter: 450 mm Tailstock - diameter: 120 mm Turning Diameter: 550 mm Turning Length: 800 mm Swing Diameter: 800 mm Spindle passage: 90 mm Spindle nose: A2-8 Tailstock Quill Stroke: 150 mm Total Power Requirement: 44 kW Weight Of The Machine Ca.: 8 t Number of tool stations: 12 pc

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 500 mm, turning length: 1,630 mm, turning diameter: 500 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 430 mm, travel distance Y-axis: 190 mm, travel distance Z-axis: 1,474 mm, spindle motor power: 22,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 20 m/min, total height: 23,000 mm, total length: 54,050 mm, total width: 28,880 mm, Equipment: documentation/manual, Okuma MacTurn 30 - 1500 OSP U100L CNC-Controller Number of axis - 5 +2 Swing over bed - Ø500mm Swing over carriage - Ø500mm Max dia. turning - Ø500 mm Max turning length - 1474 mm X axis Upper travel - 430 mm X axis Lower travel - 140 mm Z axis Upper travel - 1474 mm Z axis Lower travel - 1305 mm Y axis travel - 190 mm (+95/-95mm) W axis travel - 1305 mm C axis 360° (0.001 increment) Rapid travers Upper X-axis 20,000 mm/min Lower X-axis 15,000 mm/min Upper Z-axis 25,000 mm/min Lower Z-axis 20,000 mm/min Y -axis 12,000 mm/min C-axis 200 rpm Spindle nose - JIS A2-6 Main spindle speed - 45-4500 rpm Sub spindle speed - 45-4500 rpm Main spindle power - 15 kW Sub spindle power - 15 kW Main spindle diameter - Ø100 mm Sub spindle diameter - Ø100 mm Main spindle boring - Ø62 mm Sub spindle boring - Ø62 mm Rotary tool spindle - 6000rpm Rotary tool spindle - 6,8kW ATC Magazine - BT40 Tool storage capacity - 40 tool Max tool dia. - Ø110 mm Max. tool lenght 300 mm Max. tool mass - 10 kg Chip conveyor type high Gsdpferdvhhsx Ag Nskc Wight - 12100kg

Condition: used, Year of construction: 2013, turning length: 1,020 mm, turning diameter: 340 mm, spindle bore: 65 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 25 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,074 mm, total height: 2,487 mm, total length: 4,371 mm, total width: 2,536 mm, overall weight: 7,500 kg, CNC Control OSP P300L-R Turning diameter 340 mm Turning Length 1020 mm Spindle bore diameter 65 mm Spindle Speed 25 - 3.000 R/min Spindle motor 15/11 kW Movement X-axis 235 mm Movement Y-axis +50 / -50 mm Gedpoxnmz Usfx Ag Nekc Movement Z-axis 1074 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Spindle speed driven tools 45 - 4500 R/min Number of driven tools 12 x Tool Taper VDI Bar feeder LNS Alpha SL 65S If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, turning length: 280 mm, turning diameter: 270 mm, spindle bore: 62 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 75 rpm, total height: 1,610 mm, total length: 1,520 mm, total width: 1,630 mm, swing diameter over cross slide: 350 mm, turning diameter over bed slide: 450 mm, overall weight: 2,800 kg, number of tool stations in tool turret 1: 12, Okuma LCS-15 Godjxm T Dyopfx Ag Nokc OSP 700L CNC controller Machine its in very good condition, almost not been i use.

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: 135667, turning diameter: 280 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 330 mm, controller model: OKUMA OSP-T200L, workpiece length (max.): 200 mm, No reserve price – sale guaranteed to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates the buyer to collect the machine on time between 01/12/2025 and 05/12/2025! Gkodpfx Aexnlh Tog Njc TECHNICAL DETAILS Swing diameter over bed: 320 mm Maximum turning diameter: 280 mm Maximum workpiece length: 200 mm Travel X: 210 mm Travel Y: 330 mm Travel C (indexing): 360° Spindle speed: 40–4,000 rpm Spindle bore: 62 mm Number of tool stations in turret: 12 MACHINE DETAILS Control: OKUMA OSP-T200L Dimensions & Weight Dimensions (L x W x H): 5,000 x 1,500 x 2,400 mm Weight: 6,500 kg EQUIPMENT Feed conveyor Three pallets

Condition: ready for operation (used), Year of construction: 2003, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 105885, turning length: 600 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 640 mm, turning diameter over bed slide: 530 mm, TECHNICAL DETAILS Swing diameter over bed: 530 mm Swing diameter over cross slide: 380 mm Distance between centers: 600 mm Max turning length: 600 mm Number of controlled axes: 4 X-Axis Travel: 260 mm Rapid traverse: 20,000 mm/min Z-Axis Travel: 640 mm Rapid traverse: 25,000 mm/min Spindle Spindle diameter: 100 mm Spindle speed: 45 – 5,000 rpm Tools External turning tools: 25 × 25 mm Internal turning tool diameter: 40 mm Tool stations: 20 Driven tools Spindle speed: 45 – 4,500 rpm C-Axis Control angle: 360° Rapid traverse: 200 rpm MACHINE DETAILS Control: OSPU 100L Dimensions & Weight Dimensions (L x W x H): 2,950 × 2,050 x 2,010 mm Operating hours Spindle hours: 30,000 h Gsdexdcxzepfx Ag Nekc Machine hours: 86,000 h EQUIPMENT Forkardt swing chuck Chip conveyor

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Okuma LCS-15 CNC lathe, year 2000 with tailstock and conveyor Gkedpfexhdwtsx Ag Noc including tooling and documentation

Condition: ready for operation (used), Year of construction: 2007, operating hours: 29,152 h, Control Unit Brand OKUMA Model OSP-P200L Media Chip conveyor Yes Gjdpfx Agexfmm Eo Nokc Additional Equipment Chuck blow-out with compressed air Electronic spindle orientation Chuck opening/closing with the spindle running Automatic shut-off at the end of a batch size Programmable tool life Chip conveyor Coolant pump (8 bar) Pre-filter Connection nozzle for extraction This Okuma LVT 300-M was manufactured in 2007. A vertical turning machine featuring a 3-jaw chuck Forrkardt QLC 200-54-K6, chip conveyor, and coolant pump at 8 bar. It includes a tool measuring device and electronic spindle orientation, enhancing operational precision and efficiency. Contact us for further details regarding this machine. Application Types Turning

Condition: used, Year of construction: 2019, swing over bed 580 mm max. swing over facing slide 470 mm Gksdsxb Ef Eopfx Ag Nec Distance between centres 1.085 mm control OSP-P 300LA max. turning dia. 340 mm Spindle speed 45 - 5.000 min -1 driven tools turning speeds 45 - 6.000 U/min CNC Turning- and Milling Center | OKUMA - LB3000II-MYW800 equipped with main/counter spindle, c- + y- axis, 12-way turret for driven tools and measuring probe The machine has only approx. 2.500 H spindle hours. Equipment: - Main spindle: Collet chuck Hainbuch BZI 65, hollow cylinder Ø77, 22 kW, 45–5,000 rpm - Counter spindle: 3-jaw chuck SMW KNC-N 170-43 Z140, solid cylinder, 11 kW, 50–6,000 rpm - Coolant system: Hommel flat belt filter, 980 l tank, system pressure 8 bar The machine is in a well-maintained condition and can be inspected at any time under power. A machine video from the production plant will be shared on request. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: LB 3000 II | LB-3000 II | LB EX 3000 II - MYW800

Condition: ready for operation (used), Okuma BDU-30A Brushless Servomotor Drive Unit with E4809-045-061-D, serial number as per photo, used, normal signs of wear, 100% functional Gkodoi D Naajpfx Ag Nec

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, machine/vehicle number: 5746-01-358509.3, turning diameter: 280 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 330 mm, controller model: OKUMA OSP-U100L, workpiece length (max.): 200 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid commits you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Swing diameter over bed: 320 mm Max. turning diameter: 280 mm Max. workpiece length: 200 mm Travel X: 210 mm Travel Y: 330 mm C-axis (rotation): 360° Spindle speed: 40–4,000 rpm Spindle bore: 62 mm Number of turret tool stations: 12 MACHINE DETAILS Gjdpfx Aexnlfrog Nekc Control unit: OKUMA OSP-U100L Feed belt length: approx. 3,500 mm Dimensions & Weight Dimensions (L x W x H): 5,000 x 1,500 x 2,400 mm Weight: 6,500 kg EQUIPMENT Turret can accommodate driven tools Feed belt Three pallets

Condition: used, _____ Description: Year of manuf. : 2022 Control : Okuma OSP-P300 SA Turning diam. : 650 mm Turning length : 1000 mm Main spindle: Technology:Motor spindle Speed:4,200 rpm Power:22 kW Torque:427 Nm spindle bore:91 mm Hollow clamping cylinder:86 mm C-axis:High precision package Chuck:SMW KNCS-N 275-86 K8 Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:22 kW Torque:420 Nm spindle bore:80 mm Hollow clamping cylinder:77 mm C-axis:High precision package Chuck:SMW BHD-FC 210-52-3 Tool carrier X/Y/Z/B: Technology:Milling spindle Speed:12.000 rpm Power:22 kW Torque:120 Nm Tool holder:HSK 63 Y-axis:250 mm (+/- 125 mm) B-axis:240° Tool magazin: Number of stations:80 Equipment: Measuring systems:Direct in X/Y/Z axis (glass scales) Chip disposal:Chip conveyor Coolant supply:IKZ system, 70 bar Coolant temperature control:Deltatherm E4 Gkjdpfjwu I Irjx Ag Nec Chip rinsing:working area, manual gun Accuracy package:C-axis high accuracy Software package:5-axis auto-tuning Software option:Multifunction tool Gear cutting software package:Gear hobbing, gear peeling Control extension:Dialogue programming Workpiece measurement:Renishaw measuring probe Tool measurement:Tool setter Tool breakage monitoring:Renishaw TRS2 B-axis:NC function and turning function Bar loader:LNS Quickload Servo III+ Automation preparation:Robot interface Work area door:Automatic Set-up mode:Electronic handwheel

Condition: used, Year of construction: 2006, operating hours: 4,382 h, functionality: fully functional, machine/vehicle number: 127611, turning diameter over cross slide: 340 mm, turning length: 480 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, spindle motor power: 1,500 W, Equipment: rotational speed infinitely variable, EQUIPMENT - Hydraulic tailstock - Bar feeder 1000 mm TECHNICAL DETAILS Swing diameter over bed: 530 mm Swing diameter over longitudinal slide: 530 mm Swing diameter over cross slide: 410 mm Turning length: 480 mm Turning diameter: 340 mm Spindle speed: 4,500 rpm Spindle Spindle nose type: JIS A2-6 Taper bore: Ø70 (2.75") x 1/10 mm Spindle bore: 62 mm Gksdjxl Udrspfx Ag Nsc Spindle speed range: 38 - 4,500 rpm Longitudinal slide (Z-axis) Travel: 500 mm Feed rate: 0.001 - 1,000 mm/rev Rapid traverse: 25,000 mm/min Cross slide (X-axis) Travel: 280 mm [70 + 210] Feed rate: 0.001 - 1,000 mm/rev Rapid traverse: 20,000 mm/min Turret Type: V12 Number of tools: 12 (turning or driven tools) Tool size (external turning tools): 25 x 25 mm Tool size (internal turning tools): 40 mm C-axis Control angle: 360° (increment: 0.001°) Rapid traverse: 200°/min Tailstock & Motors Tailstock quill diameter: 90 mm Tailstock quill travel: 120 mm Main spindle motor: 15/11 kW (20 min / continuous duty) Longitudinal feed motor (Z-axis): 6 kW Cross feed motor (X-axis): 4 kW MACHINE DETAILS Machine height: 2,200 mm Footprint: 2,200 x 1,720 mm Weight: 5,200 kg EQUIPMENT - Hydraulic tailstock - Bar feeder 1000 mm

Condition: ready for operation (used), Year of construction: 2003, operating hours: 18,951 h, Control Unit Brand OKUMA Model OSP-U100L Tools Number of station 12 Media Chip conveyor Yes Additional Equipment Coolant Pump: Reinforced coolant pump for pressures starting at 8 bar Coolant Tank: 400 liters Workholding: Full clamping cylinder Chucking: Chuck blow-out with compressed air Other: Automatic shut-off at the end of a batch Gedpfx Agjxfcqao Nokc This Okuma LVT 300-M 2003 was manufactured in 2003. It features a travel range of 280mm, 12 tool stations, and a reinforced coolant pump supporting pressures from 8 bar. The machine includes a 400-liter coolant tank and a full clamping cylinder for effective workholding. Consider the opportunity to buy this Okuma 2003 vertical turning machine. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2023, CNC Turning and Milling Center with Sub-Spindle, Y- and B-Axis Only 99 spindle hours Manufacturer: OKUMA Model: MULTUS U3000 1SW 1500 Year of manufacture: 12/2022 – Commissioned in 2023 Control: OKUMA OSP-P3000SA Operating hours, approx.: Spindle run time: 99 h, NC run time: 278 h (as of July 2025) Tooling system: Capto C6 TECHNICAL DATA: Turning diameter: 650 mm Turning length: approx. 1,500 mm Main spindle speed: 5,000 rpm Motor: 22kW, 427 Nm Number of tools: 80 Spindle nose KK size 6, front bearing Ø 120 mm, spindle bore Ø 80 mm, 2-speed spindle, range shifting at full speed Sub-spindle: front bearing Ø 120 mm, spindle bore Ø 80 mm, 2-speed operation, range shifting at full speed, available on W-axis, spindle synchronization, programmable axial pressure for secure face contact, jaw cleaning with air C-axis 360°, positioning in 0.001° increments Y-axis travel +125 / -125 = 250 mm B-axis 240°, positioning in 0.001° increments Tool spindle (Okuma motor spindle) 22 kW / 120 Nm / 12,000 rpm SPECIAL FEATURES: • Enlarged main spindle KK size 8, front bearing Ø 140 mm, bore Ø 91 mm • Hollow clamping cylinder Ø 86 mm SMW VNK T2 200-86 with bore Ø 86 mm • Cylinder flange • Full-stroke cylinder SMW SIN-S 175 Gedpfow U Ey Rsx Ag Njkc • Tooling system Capto C6 for H1-turret • External and through-tool spindle air supply for turning holders and rotating tools (switchable between air/emulsion) • Tool magazine with 80 positions • Coolant flushing via M-function, for main and sub-spindle • Hinge belt chip conveyor • Drum-type filter TMF 300 • Supply pump TC 160/740 pressure: 8 bar, TH428A690 pressure: 20 bar • Bar feeder interface • Programmable workpiece catcher • Robot-loader interface • Electric door automation • Automatic shutdown • In-process measurement, Renishaw probe • Y-axis measurement • Automatic zero-point shift in Z- and C-axis • Multifunction tool software for radially mounted indexable inserts • Control expansion kit KIT One-Touch IGF-N-D: – Dialog programming Advanced One-touch, automatic job planning – Circular arc tapping – Programmable tool life, call-up of sister tools by time in cut, quantity, correction addition, and tool wear EQUIPMENT: • Sub-spindle, turning length approx. 1,500 mm and H1 turret • Collision Avoidance System (CAS) • 19” color LCD TFT with multi-touch screen • Tool monitoring system • Tool measuring device • Handwheel • MacMan machine management • Part program memory 2GB • 2x USB 2.0 • Ethernet • Remote diagnostics prepared (service costs may apply) • Harmonic spindle speed oscillation via periodic speed variation • Tool height correction in Y for turning tools • Circular thread milling X/Z/Y/B (helical interpolation) including eccentric milling X/Y/C • Hi-Cut Pro high-speed control for rotating tools • 10 workpiece zero points • Coordinate transformation (shifting, rotation) • Electric spindle orientation +/- 0.1° New price: over €530,000 This used machine can be inspected under production conditions. All details are without guarantee – sale excluding any warranties or liability. Subject to prior sale.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, turning length: 900 mm, turning diameter over cross slide: 630 mm, turning diameter: 450 mm, spindle motor power: 22,000 W, spindle speed (min.): 38 rpm, spindle speed (max.): 3,800 rpm, spindle bore: 80 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 945 mm, mount diameter: 130 mm, rapid traverse X-axis: 40,000 m/min, rapid traverse Y-axis: 26,000 m/min, rapid traverse Z-axis: 40,000 m/min, total height: 2,600 mm, total length: 3,750 mm, total width: 2,050 mm, spindle nose: JIS A2-6, travel distance W-axis: 1,000 mm, Equipment: documentation/manual, Turn-mill center OKUMA Multus B300-W TECHNICAL CHARACTERISTICS : CNC control : OSP-P200L Distance between centers : 900 [mm] Max. cutting diameter : 630 [mm] Height of centers over cariage: 630 [mm] Max. swing over bed: 630 [mm] Stroke X axis: 580 [mm] Stroke Y axis: -80 / +80 [mm] Stroke Z axis: 935 [mm] Stroke W axis: 1000 [mm] B axis indexing precision: 0.001 [°] Milling head max. speed: 10000 [rpm] Milling head spindle attachment: HSK-A63 Max. milling spindle power :16 [kW] Tool magazine capacity: 60 Max. tool length :300 [mm] Max. tool diameter: 130 [mm] Max. weight of single tool: 8 [Kg] Rapid traverse rate X axis: 40000 [mm/min] Rapid traverse rate Z axis: 40000 [mm/min] Rapid traverse rate Y axis: 26000 [mm/min] Rapid traverse rate W axis: 20000 [mm/min] Spindle nose: JIS A2-6 Min. spindle speed :38 [rpm] Max. spindle speed: 5000 [rpm] Increment C-axis :0.001 [°] Spindle power: 22 [kW] Counter spindle nose: JIS A2-6 Min. counter spindle spindle speed: 38 [rpm] Max. counter spindle speed: 5000 [rpm] Counter spindle power :15 [kW] Total power required :39.3 [kVA] Rated current :56.7 [A] Supply voltage :400 [V] Machine dimensions: 4340 x 2050 x 2600 ADDITIONAL INFORMATION : x1 One-Touch IGF software option (CD-ROM also for PC programming) x1 remote electronic handwheel x1 2-colour status light x1 chip conveyor x1 coolant tank Gedpfx Agow Eip Ss Nokc

Condition: used, max. 800 mm turning length max. 800 mm chuck ohne documentation inkl. Gsdpfjh D Anaox Ag Nskc weight of the machine ca. 8 t

Year of construction: 2005, condition: ready for operation (used), A CNC 4-axis lathe Okuma including a conventional external cylindrical grinding machine TOS BUAJ 28 is available. 1) Lathe, year of manufacture: 2005, turret: 2-disc turret, tool positions: 12/8, tool holder: VDI40, speed: 3800rpm, turning diameter: 370mm/530mm, turning length: 600mm, machine dimensions X/Y/Z: approx. 4000mm/2300mm/2200mm, weight: approx. 6800kg, control: Okuma OST E100L. Includes clamping device design, part catcher, part conveyor, and chip conveyor. Without tailstock, bar loader, spindle reduction, and VDI holders. 2) TOS, year of manufacture: 1988, max. grinding diameter: 280mm, center height: 140mm, distance between centers: 630mm, max. workpiece weight: 120kg, headstock: MT4, workpiece spindle swivel range: +/-90°, grinding head swivel range: +/-45°, grinding wheel dimensions X/Y/Z: 400mm/40mm/127mm, speed: 2560rpm, feed rate: 7m/min. Machine dimensions X/Y/Z: approx. 2000mm/1500mm/1500mm, weight: approx. 2000kg. Includes accessories and grinding wheels. Documentation available. An on-site inspection is possible. Gkedpfow Rqwyjx Ag Njc

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-8 - Spindle speeds : 3000 [rpm] - Max. bar diameter : 80 [mm] - Max. turning diameter : 300 [mm] - Max. diameter on bench : 520 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle speeds : 6000 [rpm] - Max. bar diameter : 53 [mm] - C axis indexing precision : 0.001 [°] - Travel : 520 [mm] TURRET - Number of positions : 12 - X/Z stroke : 230 / 460 [mm] - Live tools speed : 4500 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 22.5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3050 x 1860 [mm] - Machine height : 1.850 [mm] - Machine weight : 5500 [kg] EQUIPMENT - CNC : OSP-P300L-R - Coolant tank * with high-pressure pump - Chips conveyor - Parts catcher - Parts conveying strip - Bar loader : Top Automation FU352 - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. Gkjdpfx Ajuhbnnsg Nsc

Condition: ready for operation (used), Year of construction: 2006, Control Unit Brand OKUMA Model OSP-P200L Gksdpfxexl Hz Nj Ag Nec Main Drive Spindle speed range 38–5000 Spindle bore 100 mm Number of axis 5 Movement X-Axis Movement 580 mm Y-Axis Movement ±80 mm Z-Axis Movement 935 mm W-Axis Movement 1000 mm Workpiece Workpiece drm over bed 630 mm This 5-axis Okuma Multus B300-W was manufactured in 2006. It features a robust turn-mill center with a swing over bed of 630 mm and a maximum turning diameter of 450 mm. Equipped with a bar feeder, toolsetter, and a tool magazine holding 40 tools, it ensures efficient operation. The control system is an advanced Okuma OSP-P200L. If you are looking to get high-quality turning capabilities consider the Okuma Multus B300-W machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2007, turning length: 1,065 mm, turning diameter: 470 mm, Chip conveyor SMW 315 3 chuck Gkodjwq Rpwopfx Ag Njc 2 x Radial live tooling holders 2 x Axial live tooling holders Spindle bore 80 mm BMT-Tooling system Tool measuring probe Spindle hours 6960 / 6270 Running hours Max. turning Ø: 470mm X-Axis: 260mm Z-Axis: 1065mm Spindle bore: 80mm Speedrange: 4200Rpm Spindle power: 30kW ATC / revolver: 12 BMT Tool system Speed live tools:6000Rpm Power live tools:7,1kW Length: 3310mm Width: 1900mm Height: 1970mm Weight: 6100kg

Year of construction: 2022, condition: ready for operation (used), General Data Machine weight 6850 kg Control Unit Brand OKUMA Model OSP-P300LA Gjdpexl H Agjfx Ag Nskc Main Drive Number of spindles 2 Spindle bore 120 mm Number of axis 5 Movement X-Axis Movement 260 mm Y-Axis Movement 115 mm W-Axis Movement 895 mm Workpiece Workpiece drm over bed 580 mm Workpiece drm over support 470 mm Turret Rotating tools Yes This 3-axis Okuma LB 3000 EX II was manufactured in 2022, featuring a robust horizontal turning capability. It includes an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and rotational speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking to get high-quality turning capabilities consider the Okuma LB 3000 EX II machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand OKUMA Model OSP-P300S-H Movement Y-Axis Movement 160 Additional Equipment Y-Axis Machining Kit: Helical interpolation /Y-axis turning function with offset turning toolholders/ Coordinate conversion /Double pressure clamping system for main spindle chuck via M-codes (irreversible) /Double pressure clamping system for sub-spindle chuck via M-codes (irreversible) 60 tool ATC / High-pressure coolant preparation: 70 bar/ External coolant pump: 0.8 kW, 6 bar, 20 L/min/ Electric spindle orientation /Air blast for chuck cleaning Collision Avoidance System (CAS)/Chip Conveyor Preparation/Big Bore Spindle ASA 6": 22/15 kW, 3800 rpm/ High-precision C-axis positioning/ Continuous B-axis/ Tool Magazine with 60 positions/ 0.1 Micron Resolution Software/ API Library 2 for OSP-P300S/ Standard Right Side Chip Conveyor/ 15 Bar Coolant Pump 20 L/min/ Filtration unit with 4 fabric filter bags (25 micron), pump 15 bar, 20 L/min SCHUNK ROTA THW+260-81R A8 chuck with KITAGAWA SS1770 cylinder for Big Bore main spindle Gkodpfx Agoxg Umps Nec SCHUNK ROTA THW+215-66 A6 chuck with KITAGAWA SS1452 cylinder for sub-spindle 5-Axis Machining Kit: Super NURBS on 5 axes /Vector control /DNC-DT interface /Tool position control/ 3D coordinate transformation /Helical interpolation (includes inclined plane profile software) This 5-axis OKUMA MULTUS B300 II W was manufactured in 2016. It features an ASA 8 spindle offering 5,000 rpm and 65 mm bar capacity, capable of handling a max turning diameter of 630 mm. It includes a high-pressure coolant preparation of 70 bar, a continuous B-axis with HSK63, and a tool magazine with 60 positions, optimizing both turning and milling capabilities. If you are looking for high-quality turn-mill operations, consider this OKUMA machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 2013, condition: ready for operation (used), This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Application Types Godpfxexc Rcrs Ag Njkc Milling

Condition: ready for operation (used), Year of construction: 2004, Control Unit Brand OKUMA Model OSP-E100L Main Drive Number of axis 3 This 3-axis Okuma VTurn LVT300-M was manufactured in 2004. It features a vertical turning machine design, complete with a load and unload table. Ideal for those looking to get high-quality turning capabilities, consider the Okuma VTurn LVT300-M machine we have for sale. Contact us for more information. Application Types Turning Gjdpfxew Aikwj Ag Njkc