Used Okuma Lr 15 for sale (178)

Condition: used, Year of construction: 1996, Switch-on time: 68743 h Iedpfx Asvfucfjgpsbd Spindle hours: 17338 h

Year of construction: 1998, condition: excellent (used), machine/vehicle number: 1728, CNC turret lathe Okuma LB15 immediately available The OKUMA LB 15 CNC lathe has been professionally serviced regularly since it was purchased and is in perfect technical condition. It has a hydraulic chuck with a diameter of 250 mm and a turret mount for 12 tools. The lathe spindle rotates at a speed of 70-3800 rpm and has a diameter of 75 mm. Specifications of the OKUMA LB-15 CNC lathe – CNC control: OSP 5000L-G CNC system (German) – Data transmission: RS232 – Tool turret: 12-position type BOLT ON – Lathe chuck: 250 mm – Spindle: 70-3800 rpm. (11 kW, 30 min; 7.5 kW – continuous operation) – non-continuous spindle – Spindle bore diameter: fi 75 mm (at a depth of 70 mm, measured from the face of the lathe chuck and without jaws) – Spindle bore diameter: fi 28 mm (at a depth of 200 mm, measured from the face of the lathe chuck and without jaws) – X-axis travel: 400 x 0.001 mm – Z-axis travel: 500 x 0.001 mm – Cutting speed XZ: 0.01-1000 mm / rev – XZ feed: 12,000 mm / min. – Power supply: 3 x 400V – Machine rated power: 21 kVA – maximum load current: 36A – Machine dimensions (width x depth x height): 2.9 (3.9 m with chip conveyor) x 1.8 x 1.72 m – Machine weight: 4500 kg NC control OKUMA OSP 5000 L-G very good repeatability with chip conveyor The machine can be inspected at any time Timely, insured delivery with forwarding agency possible Inexpensive financing / installment purchase possible Ibedpfxsm Ux A Sj Agpod

Condition: used, Year of construction: 1996, functionality: fully functional, travel distance X-axis: 260 mm, travel distance Z-axis: 1,020 mm, spindle motor power: 15 W, rapid traverse X-axis: 15,000 m/min, rapid traverse Z-axis: 20,000 m/min, OKUMA LB15II-MW CNC Turning Center The OKUMA LB15II-MW is a dual-spindle CNC turning center with a driven tool turret, designed to ensure high precision, flexible productivity, and complete machining in a single setup. Perfect for complex turning operations and series production. General data: Year of manufacture: 1996 CNC control: OKUMA OSP7000L Machine weight: 5,900 kg Dimensions (LxWxH): 3,315 x 1,895 x 1,905 mm Machining capacity: Max swing over bed: Ø530 mm Max turning diameter over cross slide: Ø340 mm Max turning length: 1,000 mm Distance between centers: 1,020 mm Spindle bar capacity: Ø62 mm Axes and travels: X axis: 260 mm Z axis: 1,020 mm C axis: 0.001° (full 360° continuous control) Spindles: Main Spindle: Speed: 45 – 4,500 rpm Spindle nose: ASA A2-6 Power: 11/15 kW (cont. 20/30 min) Sub-Spindle: Speed: 45 – 4,500 rpm Spindle nose: ASA A2-5 Power: 7.5/11 kW Turret: 12 stations (powered tool positions available) Tool dimensions: 25 x 25 mm / Ø40 mm boring bars Powered tool speed: 3,000 rpm Included tooling: 17 fixed tools (10 boring bar holders + 7 external turning holders) 6 powered tools (3 angle heads + 2 double axial + 1 single axial) Feed rates: X-axis rapid traverse: 15,000 mm/min Z-axis rapid traverse: 20,000 mm/min Equipment and accessories: LNS MOVE bar feeder, capacity up to 3,200 mm Mayfran chip conveyor Coolant tank with wash-down pump High-pressure pump with integrated tank Tool presetting arm Manuals, electrical diagrams, and CE declaration Iodpfewxypiox Agpsbd A complete and compact solution, ideal for bar machining and secondary operations on the sub-spindle. The presence of the driven tool turret enables complex processes in a single cycle, reducing both machining and setup times.

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, Ref. No.: LT-2418 Manufacturer: Okuma Model: Multus U3000 1SW-1500 Control: Okuma OSP-P300S-H Ibodpfx Aou U E Avogpjd Year of manufacture: 2014 Commissioning: 2.015 Language Keyboards / Software: International / English Country of origin: Japan Technical Characteristics: Capacity: Turning on bed: Ø 650 mm Distance between points: 1.500 mm Maximum turning diameter: Ø 650 mm Maximum turning length: 1.500 mm Bar pitch (main spindle): Ø 70 mm Bar passage (opposite spindle): Ø 70 mm Main spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed ranges: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) Opposing spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed range: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) X-axis: Stroke: 645 mm Rapid traverse: 50.000 mm/min Z axis: Stroke: 1,600 mm Rapid traverse: 50.000 mm/min Y-axis: Stroke: 250 [± 125] mm Rapid traverse: 40,000 mm/min W-axis: Stroke: 1,594 mm Rapid traverse: 30.000 mm/min B axis: Controlled angle: -30° to +210° (increment 0.001°) Rapid traverse: 30 rev/min C axis: Controlled angle: 360° (0.0001° increment) Rapid traverse: 200 rpm Turret: Type: H1 Number of tools: 1 (L or M tool) Tool dimensions: Turning outside: 25 x 25 mm Turning inside: Ø 40 mm Milling head: Spindle speed: 50 - 12.000 rpm Speed ranges: 2 speed ranges, infinitely variable Motor: 25/19 kW (3 min/cont) Tool changer (ATC): Cone Toolholder: HSK-A63 Number of tools: 40 Max. diameter of adjacent tools: ø 90 mm Maximum diameter of non-adjacent tools: ø 130 mm Maximum tool length: 400 mm Maximum weight of each tool: 10 Kgf Dimensions and weights: Height of the machine: 2.905 mm Occupied floor area: 4,480 x 2,995 mm (4,480 x 2,995 mm) Machine weight: 16,200 kg

Condition: good (used), Year of construction: 2015, machine/vehicle number: 190630, turning length: 150 mm, turning diameter: 200 mm, spindle bore: 42 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 155 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, turning diameter over bed slide: 220 mm, overall weight: 5,000 kg, spindle nose: 140 Flat, bar diameter (max.): 51 mm, power: 0.015 kW (0.02 HP), The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loader (OGL) into the production line, parts can be loaded and unloaded automatically. An extremely compact footprint improves floor space utilization, while the popular dual spindle option significantly reduces cycle time. Iodpfxsrtrlzs Agpobd Equipped with: Okuma OSP-P300L CNC Control 8" 3-Jaw Chuck Expanding Mandrel Turret Tooling Gantry Loader Pendant Controller Chip Auger Stack Light

Year of construction: 2015, condition: excellent (used), Okuma Genos M560-V Control: OSP 300 Travels: X41.34 Y22.05 Z18.11 Rapid traverse X,Y: 1,575 mm/min; Z: 1,262 mm/min 15,000 rpm Spindle taper: Cat 40 Big Plus 32 tools Ibedpsxtt S Dsfx Agped Table load capacity: 2,000 kg Machine weight: 16,500 kg 480 V with transformer Low-pressure TSC Spindle cutting time: 4,800 h

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 760 mm, table load: 500 kg, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis travel: 760 mm Y-axis travel: 760 mm Z-axis travel: 760 mm Spindle center to table surface: 50 to 810 mm Spindle end to table center: 135 to 895 mm Table size: 500 x 500 mm Max. load capacity: 500 kg Index positions: 360 Speed range: 50 to 15,000 rpm Number of speed ranges: stepless Taper: NT No. 40 Ijdpfjxvq Hdox Agpsbd Spindle diameter: 70 mm Feed Rapid traverse (X/Y/Z): 60,000 mm/min Manual feed (X/Y/Z): 1 to 60,000 mm/min Tool changer Tool holder: Standard MAS BT40 Magazine capacity: 48 stations Max. tool diameter (adjacent positions occupied): 70 mm Max. tool diameter (adjacent positions free): 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg MACHINE DETAILS Total power requirement: 43 kW Dimensions & Weight Space requirement: 2.7 x 4.73 x 2.87 m Machine weight: 11.5 t

Condition: ready for operation (used), Year of construction: 2002, operating hours: 20,204 h, functionality: fully functional, turning length: 1,025 mm, turning diameter: 530 mm, travel distance X-axis: 475 mm, travel distance Z-axis: 1,170 mm, quill stroke: 150 mm, controller model: Okuma OSP-E100L, TECHNICAL DETAILS Distance between centers: 1,000 mm Swing over bed: 550 mm Maximum machining diameter: 530 mm Maximum workpiece length: 1,025 mm Travels X-axis: 475 mm Y-axis: ±80 mm Z-axis: 1,170 mm C-axis: 360° (continuous) B-axis indexing angle: 1° Main spindle Spindle speed: 5,000 rpm Spindle nose: JIS A2-6 Taper bore diameter: 62 mm Bearing diameter: 100 mm Sub spindle Spindle speed: 6,000 rpm Spindle nose diameter: 140 mm Taper bore diameter: 43 mm Bearing diameter: 80 mm Milling spindle Speed range: 6,000 rpm Feed rates Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 26 m/min Rapid traverse Z-axis: 40 m/min Automatic Tool Changer (ATC) Number of tools: 84 Maximum tool length: 250 mm Maximum tool diameter: Ø120 mm (with adjacent stations empty) Maximum tool weight: 5 kg MACHINE DETAILS Control: Okuma OSP-U100L Dimensions (L x W x H): 3,820 × 2,645 × 2,900 mm Weight (without tool magazine): 12,500 kg Main switch-on hours: 20,204 h EQUIPMENT Automatic tool change system High-speed M-spindle with coolant supply 360° C-axis for continuous machining Robust B-axis with 1° indexing Precision sub spindle for second machining side Stable turret with ATC system Ibedpfxjxvzp As Agpod

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, OKUMA V-Turn LVT 400 CNC Vertical Turning Lathe Ibsdpfx Aexwy S Esgpsd (2 machine cell) Model: LVT 400 Control: OKUMA OSP 1000L Year: 2006 12 – tool turrets Hi – Power 60 Bar High Pressure coolant Swarf Conveyor Work Measurement Carousel System linking with both machines with turnover station

Condition: ready for operation (used), Year of construction: 2003, Control Unit Interface HSK 63 Brand OKUMA Model OSP-100L Main Drive Number of axis 5 Tools Number of index 40 Max tool length 1500 mm Additional Equipment Ibedpfx Agoxwqwlopjd Autodoor This 5-axis Okuma MacTurn 350 was manufactured in 2003. It features an HSK 63 tooling system and can accommodate up to 40 tools. The machine includes an autodoor and supports a turning length of 1500 mm. Consider the opportunity to buy this Okuma MacTurn 350 Turn-mill centre machine. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 1997, Distance between centers 2070 mm Iodow Rkd Tspfx Agpebd Swing over bed 700 mm Swing over carriage 430 mm Max turning diameter 460 mm diameter (2000 mm) Spindle bore 90 mm Spindle speeds 14-3200 rpm Z-axis movement 2070 mm X-axis movement 330 mm Turret w/12 stations Tailstock taper MT 5 Control: OSP 7000-L Equipped with: Hydraulic steady rest Chip conveyor 10-20 tool holders 10-20 sets of jaws

Condition: ready for operation (used), Year of construction: 2013, operating hours: 24,412 h, functionality: fully functional, turning length: 1,000 mm, turning diameter: 300 mm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,144 mm, controller model: OSP P300L-R, TECHNICAL DETAILS Travel X-axis: 235 mm Travel Z-axis: 1,144 mm Turning length: 1,000 mm Turning diameter: 300 mm Turret: 12 stations – all driven Speed: 45 – 4,500 rpm Spindle bore: 68 mm Tool holder: VDI 40 Ijdpfx Agoxxi Ulspsbd MACHINE DETAILS Control: OSP P300L-R Weight: 6,600 kg Operating hours: 24,412 h EQUIPMENT Chip conveyor Chuck diameter: 250 mm Touch setter Tailstock

Condition: good (used), Year of construction: 2003, machine/vehicle number: 103848, travel distance X-axis: 210 mm, travel distance Y-axis: 330 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, turning diameter: 330 mm, total length: 5,000 mm, total height: 2,400 mm, total width: 1,600 mm, overall weight: 6,500 kg, OKUMA LVT300-M Vertical CNC Lathe Serial Number: 103848 Ibjdpfx Agjxw Uawepod Swing diameter over bed: 320 mm Max. turning diameter: 280 mm Max. workpiece length: 200 mm Travel distances: X-axis: 210 mm Y-axis: 330 mm C-axis (indexing): 360° Spindle speed: 40–4000 rpm Spindle bore: 62 mm Number of tool positions in turret: 12 Turret can accommodate driven tools Important note: The tool holders (including tools) and the chuck visible inside the machining area are not included in the sale or delivery. The chip conveyor is included in the sale and delivery, but not the pallets located on the conveyor. The three pallets shown at the end of the photos are included in the sale and delivery. Any oil mist extraction system visible in the photos is not included in the sale and delivery. Control: OKUMA OSP-U100L Length of chip conveyor: approx. 3500 mm Manufacturer: EWA-B Type: PS800 Year of manufacture: 2003 Machine number: 5746-01-358509.3 The technical documentation was not photographed but will be supplied with the machine. DIMENSIONS & WEIGHT: Dimensions (L x W x H): 5000 x 1500 x 2400 mm Weight: approx. 6500 kg

Condition: used, turning diameter over bed 460 mm turning length 1250 mm centre height 230 mm centre distance 1250 mm spindle turning speed range 35 - 1800 U/min weight of the machine ca. 2,7 t Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head with 3 inserts, solid steady Iodpsxwp Ebsfx Agpebd

Condition: excellent (used), Year of construction: 2013, turning diameter over cross slide: 650 mm, turning length: 1,750 mm, turning diameter: 650 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, turning diameter over top slide: 650 mm, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Isdpfx Asxtp Emsgpebd Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Max Turning Dia: 650mm Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia 12 Station Upper Turret Swarf Conveyor Coolant System

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand OKUMA Model OSP-P200M Main Drive Spindle speed range 15000 rpm Ibjdpfxjxq Hr Ee Agpod Movement X-Axis Movement 560 Y-Axis Movement 610 Z-Axis Movement 625 This 4-axis Okuma MA-400HA horizontal machining center was manufactured in 2007. It features a 560mm X-axis, 610mm Y-axis, 625mm Z-axis, and a table size of 400x400mm. The machine includes a 15,000 rpm spindle, 100-tool matrix magazine, and OSP-P200M control. It also boasts a 6 APC/pallet pool and a Mayfran Consep 2000 chip conveyor. Consider the opportunity to buy this Okuma MA-400HA horizontal machining center. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2000, functionality: fully functional, OKUMA - MacTurn 50 Offer Details Stock number: 1039-9061 Machine type: CNC Turning and Milling Center Manufacturer: OKUMA Model: MacTurn 50 Year of manufacture: 2000 Control system: OSP 7000 L Location: D-59302 Oelde, Germany Country of origin: Japan Delivery time: By arrangement Ibsdpfsxtn Umjx Agpod Freight basis: Ex site Additional Information: CNC Turning and Milling Center OKUMA - MacTurn 50 WE OFFER YOU: - Workshop-inspected machines - Free loading onto truck - NO auction fee - Delivery available (at extra cost) - Offloading and commissioning (at extra cost) Technical Details Maximum turning diameter: 580 mm Turning length: 1,500 mm Control system: OSP 7000 L Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Main Spindle: - Speed range, main spindle: 12 – 2,800 rpm - Spindle bearing diameter: 150 mm - Spindle bore: 110 mm - Spindle nose: JIS A2-11 - Main spindle drive power: 37 (30) kW - C-axis: 0.001° Travels: - X-axis: 598 mm - Y-axis: 230 mm (+110 / -120) - Z-axis: 1,660 mm Feeds: - Rapid traverse (X/Y): 12,000 mm/min - Rapid traverse (Z): 20,000 mm/min - Rapid traverse (C): 100 rpm - Cutting feed rate X / Z / Y: 0.001 – 1,000 mm/rev Tool Turret: - Type: H2 ATC - Number of tool stations: 2 (1x L-Tool / 1x M-Tool) positions - Driven stations: stepless - Speed range — driven tool positions: 40 – 3,000 rpm - Tool shank height: 25 mm - Boring bar diameter: 50 mm Tailstock: - Quill diameter: 120 mm - Quill stroke: 170 mm - Tailstock taper: MT 5 Tool Magazine: - Number of tool stations: 50 positions - Tool holder: MAS BT 50 - Max. tool diameter: 170 mm - Max. tool length: 350 mm - Max. tool weight: 20 kg - Magazine drive: 3.2 kW Total power requirement: 53 kVA Machine weight approx.: 18.5 t Space required approx.: 6.0 x 3.2 x 3.0 m Accessories - Chip conveyor - Central coolant system - High-pressure coolant: 20 bar - Tailstock - Signal lamp - C-axis: 0.001° - Y-axis - Hydraulic unit - Steady rest - Various tool holders: 44 positions - Three-jaw chuck: Schunk – ROTA NC 400-120 - Electronic handwheel

Condition: good (used), Year of construction: 1990, 2. Turret disks with tool holders. Iodpfjxr Diwex Agpjbd For CNC lathe OKUMA&HOWA 2SP

Condition: used, max. 800 mm turning length max. 800 mm chuck ohne Ibjdpfx Agoh D Anaeped documentation inkl. weight of the machine ca. 8 t

Condition: used, Year of construction: 2013, turning length: 1,020 mm, turning diameter: 340 mm, spindle bore: 65 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 25 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,074 mm, total height: 2,487 mm, total length: 4,371 mm, total width: 2,536 mm, overall weight: 7,500 kg, CNC Control OSP P300L-R Turning diameter 340 mm Turning Length 1020 mm Spindle bore diameter 65 mm Spindle Speed 25 - 3.000 R/min Spindle motor 15/11 kW Movement X-axis 235 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1074 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Spindle speed driven tools 45 - 4500 R/min Number of driven tools 12 x Tool Taper VDI Ijdpfxoxnmz Uo Agpsbd Bar feeder LNS Alpha SL 65S If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2013, CNC Lathe with y-axis Okuma - LT2000EX Length:4200mm Width:2200mm Height:2700mm Ibodpfx Aexpg Ecogpod Weight:10000kg

Year of construction: 2006, condition: ready for operation (used), Control Unit Brand OKUMA Model OSP-P200L Ibedpfx Agjxq Ht Aopod This Okuma LU300-M was manufactured in 2006. A robust horizontal turning machine featuring a spindle bore of 62mm and speeds up to 5000 RPM. It includes dual turrets with 12 and 8 positions respectively, enhancing its versatility. Equipped with a Mayfran chip conveyor and OSP-P200L control for efficient operation. Consider the opportunity to buy this Okuma LU300-M horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, controller model: P200M, Machine type: Horizontal Machining Center Manufacturer: OKUMA Model: MA-400HA Year of manufacture: 2008 Control: OSP – P200M Country of origin: Japan Delivery: short-term by arrangement 4-axis machining center! High productivity! Includes various accessories! Machine equipment: - ConSep chip conveyor system with high-pressure pump - Various software features - Touch setter with length measurement and breakage detection - Work area shower Short description: This machining center is in good overall condition. Its comprehensive base and additional equipment make this used machine highly versatile and characterized by high productivity. 4-axis machining enables efficient and flexible processing of workpieces. The integrated ConSep system with high-pressure pump ensures coolant filtration is directly integrated into the production process. The touch setter not only measures tool length but also monitors for breakage. Additional accessories such as a work area shower and software packages further enhance the production capabilities. This CNC machining center allows for cost-effective and efficient manufacturing. Technical specifications: - Axis travel: X-axis (column left-right): 560 mm Z-axis (table front-back): 625 mm Y-axis (spindle up-down): 610 mm - Number of pallets: 2 (2-pallet changer) - Pallet size: 400 x 400 mm - Max. pallet load: 400 kg - Max. workpiece dimensions on pallet: Ø500/600 x 710 mm Ibjdpfx Ajw Hzxzjgpsd - Spindle speed: 15,000 rpm - Main spindle (10min/cont.): 22/18.5 kW - Tool holder: BT40 - Tool magazine: 60 positions - Machine dimensions without accessories (LxW): approx. 4450 x 2410 mm - Total machine length (machine with ConSep unit): approx. 6600 mm - Machine height: approx. 2950 mm - Weight: approx. 11,500 kg Optional: - Transport arrangement and execution - Machine installation and setup - Machine commissioning

Condition: used, Year of construction: 2004, travel distance X-axis: 1,000 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Okuma, controller model: OSP-E100M, total height: 3,280 mm, total length: 6,500 mm, total width: 3,460 mm, table width: 630 mm, table height: 630 mm, spindle speed (min.): 12,000 rpm, power: 37 kW (50.31 HP), Okuma MA-600 HB Space Center OSP E 100M control Dimensions pallet 630 x 630 mm Number of pallets 2x X-axis travel 1000 mm Ibedjxnkviepfx Agpsd Y-axis travel: 950 mm Z-axis travel 1000 mm Indexing of table 1° Spindle holder MAS BT 50 Spindle speed 12,000 rpm Spindle motor 37/26 kW Positions in the tool magazine 60 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 2022, operating hours: 1,790 h, condition: ready for operation (used), Main Drive Spindle speed range 50 - 6000 Spindle motor power 11.5 kW Iedpfxsxuawcs Agpobd Spindle bore 62 mm Number of axis 2 Additional Equipment Automation: Samsys short bar loader Extra Features: High-pressure pump & tank, high-pressure seal kit, workpiece removal arm, tool height correction in the Y-axis, coolant tank and pumps, detachable wired handwheel, tool monitoring, programmable face printing, and Hi-Cut Pro for driven tools two BMT55 revolvers with 16 stations each This Okuma LT2000-2T1MY was manufactured in 2022. It features two 22KW spindles, a 32-station BMT55 turret, and an OSP-P300LA control system with OSP and ECO suites. It includes a Samsys short bar loader, high-pressure pump, and tank. The machine offers 4-axis machining capabilities with Y-axis in the upper turret and is equipped with a 15" color LCD TFT multi-touch screen. If you are looking to get high-quality turning capabilities consider the Okuma LT2000-2T1MY machine we have for sale. Contact us for more information. Application Types Turning