Used Okuma Machining Centre for sale (226)

Condition: used, Year of construction: 2006, Okuma Space Centre MA-600HB Horizontal Twin Pallet Machining Centre with Okuma OSP-P200M CNC Control System. Serial No. 1296158 (2006), X Axis = 1,000mm, Y Axis = 900mm, Z Axis 1,000mm, Spindle Nose NT 50, Spindle Speed Std 6,000rpm, Spindle Drive VAC 30/22kw, Pallet Size 630 x 630mm, Max Weight on Pallet 1200kg, Pallet Indexing 1 deg, Pallet Change Time 11 seconds, Max Work Piece Size Ø 1,000 x 900 High, Axis Drives Feed Rate X, Y, Z Axis 1 - 60,000mm/min, Rapid Traverse X, Y, Z Axis 60,000mm/Min, Automatic Toolchanger No. of Tools 40, Floor Space 3,380 x 6,140mm, Machine Weight 24,000kg Approx. Qty of 50 INT Spindle Tools (Back End Only). Country of Origin: Japan Location: These lots are located in Swindon, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Kedpfoz Arzvox Ag Usdt

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, feed length X-axis: 1,050 mm, feed length Y-axis: 560 mm, feed length Z-axis: 460 mm, feed rate X-axis: 32 m/min, feed rate Y-axis: 32 m/min, feed rate Z-axis: 32 m/min, total height: 2,746 mm, total length: 2,510 mm, total width: 3,100 mm, table width: 560 mm, table length: 1,300 mm, overall weight: 7,500 kg, Equipment: chip conveyor, documentation/manual, OKUMA GENOS 560R-V 4-axis vertical machining center, CNC OSP-P300M-R, Series 0712-100478, including machining tools, vise, collet set, and programming software. The equipment was purchased new in Romania from the manufacturer's representative. It has been used very little in the last 2 years, probably 25-50 hours. Ksdpfxjzy Etme Ag Uodt

Condition: good (used), Year of construction: 2004, functionality: limited functionality, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: Okuma, controller model: OSP-E100M, workpiece length (max.): 600 mm, workpiece width (max.): 710 mm, workpiece weight (max.): 400 kg, total height: 2,760 mm, total length: 4,535 mm, total width: 2,415 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, overall weight: 10,000 kg, spindle speed (max.): 8,000 rpm, distance table center to spindle nose: 710 mm, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, Okuma Space Center MA400HA Horizontal Machining Centre Kjdpfx Agjwcd Evs Uodt Machine Type: CNC Horizontal Machining Centre Year: 2004 Control: OSP-E100M Axes: 4 No. of Pallets: 2 Condition: Good - There is an issue with the pallet changer. Includes Cromar Swarf Conveyor Coolant Filtration System Technical Specifications Pallets: 2 Size of Pallets: 400 x 400mm X Axis Travel: 560mm Y Axis Travel: 610mm Z Axis Travel: 625mm B Axis Travel: 360 Deg Rapid Traverse: 60m/min Spindle Centre to Pallet Top: 50 - 660mm Spindle Nose to Pallet Centre: 85 - 710mm Max Pallet Load: 400kg Max Workpiece Dimensions: 600 x 710mm Tool Pockets: 40 Spindle Taper: BT40 Spindle Power: 15kW Spindle Speed: 8,000rpm Machine Dimensions: 4535 x 2415 x 2760mm Machine Weight: 10,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: ready for operation (used), Year of construction: 2015, operating hours: 500 h, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, table load: 2,500 kg, overall weight: 20,500 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 36, number of axes: 3, This 3-axis Okuma Millac 852 VII was manufactured in 2015. It features a robust table size of 2,200 × 850 mm and a maximum table load of 2,500 kg. The machine is equipped with a high-torque spindle motor of 18.5 kW and a rapid traverse of 20,000 mm/min. If you are looking to get high-quality machining capabilities, consider the Okuma Millac 852 VII vertical machining centre we have for sale. Contact us for further details. • Condition: Excellent; approximately 500 cutting hours; near-new condition • Heavy-duty machining center for high material removal rates • Extremely rigid machine structure • Box guideways on all axes; quadruple box guideway system on Y-axis • Automatic oil lubrication for guideways with machine stop monitoring • Okuma OSP300 control with IGF conversational programming • Parameterized automatic tool collision prevention system • Automatic cutting force, tool load, and spindle torque monitoring • Tool life management and tool usage monitoring • Communication interfaces: USB, PCMCIA, RS-232 • Cutting force: 580 Nm • Chip removal capacity: 540 cm³/min • Spindle speed: 6,000 rpm • Spindle oil cooler • Table size: 2,200 × 850 mm • Rapid traverse: 20,000 mm/min • Tool change time: 0.5 s; chip-to-chip time: 5 s • Machine currently under production; can be inspected under power by an official Okuma technician Kdsdpfxjzqcr Ie Ag Ust • Includes documentation: spare parts list, electrical diagrams, programming manual, operation manual • Delivery: Immediate, subject to prior sale Additional equipment • Renishaw tool measuring system • Independent Knoll high-pressure coolant system (70 bar) • 30-micron coolant filtration system • LTA mist extraction system • Rear hinge-type chip conveyor • Large set of BT50 tool holders • Transformer Technical Specification Taper Size BT 50

Condition: like new (used), Year of construction: 2015, functionality: fully functional, * Okuma Millac 852V II / 50. * Machine in excellent condition with very few cutting hours. * Machine designed for high material removal rates. * Prismatic guides on all axes. * Quadruple prismatic guide system on the Y-axis. Kdjdpjz Alh Nsfx Ag Ust * Extremely rigid structure. * Lubrication system for guides, oil-fed, with automatic machine stop. * Renishaw tool probe. * BT 50 spindle taper. * 18.5 kW high-torque motor. * Cutting power of 580 N/m. * Chip evacuation capacity of 540 cm/min. * Automatic Okuma IGF OSP300 conversational programming system. * Automatic force control and tool consumption monitoring. * Parameterized automatic tool collision avoidance system. * Communication ports via USB, PCMCIA card, and RS 232. * Tool life management and tool consumption monitoring. * Automatic control of tool torque and stresses. * Table dimensions: 2,200 x 850 mm. * Permissible weight: 2,500 kg. * Spindle speed: 6,000 rpm. * X-axis travel: 2,050 mm. * Y-axis travel: 850 mm. * Z-axis travel: 750 mm. * Oil cooler for the spindle. * Rapid traverse speed: 20,000 mm/min. * Tool storage for 36 tools. * Tool change time: 0.5 seconds. * Chip-to-chip time: 5 seconds. * Independent Knoll coolant system with 70 bar pressure. * 30-micron anti-particle filter system. * LTA fume extraction equipment. * Rear chip extractors, hinged type. * Machine currently in production. * Inspectable by a qualified, certified Okuma technician. * Near-new condition. * Extensive range of BT 50 tool holders. * Electrical transformer, documentation, parts list, electrical diagrams, programming and operations manual. * Machine weight: 20,500 kg. * Immediate delivery, unless sold prior.

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, Equipment: chip conveyor, documentation/manual, Machine Name - Okuma Machine Model - MX45VAE Y.O.M 2000 Descriptions - OSP 700M Spindle Speeds 7000 rpm BT40 taper Table Size 1000 mm x 460mm X – Axis Travel 560mm Y – Axis Travel 460mm Z – Axis Travel 450mm 20 station ATC Renishaw tool setter Renishaw work probe Kdodpfozair Ujx Ag Uet Coolant system and conveyor 2 x identical machines available

Condition: ready for operation (used), Year of construction: 2007, overall weight: 27,000 kg, spindle speed (max.): 6,000 rpm, This 4-axis Okuma MA-600 HB was manufactured in 2007. It features a maximum machining area of 1000 x 900 x 1000 mm, a spindle speed up to 6000 rpm, and a rapid feed rate of 30 m/min. With 150 tool positions and a MAS BT 50 tool holder, it's ideal for complex machining tasks. Consider the opportunity to buy this Okuma MA-600 HB horizontal machining centre. Contact us for more information about this machine. • Axes: 4 • Maximum Machining Area X/Y/Z: 1000 mm x 900 mm x 1000 mm • 4th Axis: 360° x 1° • Rapid Feed Rate: 30 m/min – 12 m/min • 1° B-axis • Drive Power/Max. Torque: 37 kW 10 min, 26 kW continuous load / 606 Nm • Tool Positions: 150 • Tool Holder: MAS BT 50 • ConSep System • Measuring Probe • Tool Breakage Monitoring • Pallet station with 6 pallets, pallet size 630 x 630 mm • External cooling/internal cooling 20 bar/internal air Kdsdjzycdcspfx Ag Uot Dimensions Machine Depth 10500 mm

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 0712-100481, feed length X-axis: 1,050 mm, feed length Y-axis: 560 mm, feed length Z-axis: 460 mm, controller manufacturer: Okuma, controller model: OSP, table width: 560 mm, table length: 1,300 mm, overall weight: 7,500 kg, type of input current: three-phase, Equipment: documentation/manual, For sale: used Okuma Genos M560R-V milling machine. X/Y/Z: 1050 x 560 x 460 mm, Kdodpfx Ajz Ahx Rsg Uot Table: 1300 x 560 mm OSP control system VAT invoice provided. Please contact me for further details. Type: GENOS M560R-V Serial number: 0712-100481 Year of manufacture: 2016 Gross weight: 7500 kg

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 1,500 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, controller manufacturer: OKUMA, controller model: OSP-P300M, table load: 1,500 kg, overall weight: 9,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 30,000 W, number of slots in tool magazine: 32, number of axes: 3, This 3-axis Okuma MB-66VA was manufactured in 2013. It features an X-axis travel of 1500 mm, Y-axis travel of 660 mm, and Z-axis travel of 660 mm. The machine is equipped with a powerful 30 kW spindle, capable of reaching speeds up to 15,000 rpm, and has a tool magazine with 32 positions. If you are looking to get high-quality machining capabilities, consider the Okuma MB-66VA vertical machining centre we have for sale. Contact us for further details. • Table size: 1500 × 660 mm Ksdpsy Ndp Ijfx Ag Uodt Technical Specification Taper Size BT 50

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, Used Okuma MA-600 HB horizontal machining center, year 2008, including turncut function, spindle cooling, 6000 rpm. Travels: Z-810 mm, X-1000 mm, Y-900 mm. Tool magazine for 150 tools, 1 spindle, 4 axes, 6-pallet changer function. Kjdpoywicvsfx Ag Usdt

Condition: ready for operation (used), Year of construction: 2006, operating hours: 31,900 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: OKUMA, controller model: OSP-200M, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis Okuma MA-600HB was manufactured in 2006. It features a maximum spindle speed of 12,000 RPM and a BT50 tool holder. The machine is equipped with a coolant system in the spindle at 30 bar and includes a Renishaw MP10 for tool measurement. If you are looking to get high-quality machining capabilities, consider the Okuma MA-600HB horizontal machining centre we have for sale. Contact us for further details. • Coolant through spindle: 30 bar • Tool breakage detection • MOP-Tool • DNC-DT Kdsdpozx D Dzsfx Ag Ujt Additional equipment • NC table 0,001 (NC rotary/indexing table) • Renishaw MP10 probe • Mayfran MT10 (chip conveyor/coolant handling) Technical Specification Taper Size BT 50

Condition: ready for operation (used), Year of construction: 2007, operating hours: 21,500 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: OKUMA, controller model: OSP-200M, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 150, number of axes: 4, This 4-axis Okuma MA-600HB was manufactured in 2007. It features a maximum spindle speed of 6000 RPM and a robust tool capacity of 150 tools in the automatic tool changer. The machine is equipped with a 30 bar coolant system and includes advanced features such as tool breakage control and DNC DT. If you are looking to get high-quality machining capabilities, consider the Okuma MA-600HB horizontal machining centre we have for sale. Contact us for further details. • Spindle: 30 bar through-spindle coolant • Control/Options: DNC/DT, MOP-Tool • Functions: Tool breakage control, Tool length offset Additional equipment • Renishaw MP10 probe • Robot interface type E Ksdpfxszx Dyps Ag Ujdt • Mayfran MT10 chip conveyor

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC Turning and Milling Center Okuma LT 2000 EX -MY 2ST Control: OSP-P300L Year of manufacture: 2013 Internal machine no. 24 Swing diameter over bed: 400 mm Centre distance: 960 mm Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Kdedpfxjyvfhdo Ag Ust Sub spindle speed: 50 – 6,000 rpm Travel paths: W-axis: 730 mm X-axis: 205 mm C-axis: 360 degrees (0.001°) 2 tool turrets, each with 16 stations (all stations driven) Equipment: - Chip conveyor - Paper band filtration system with high-pressure pump - 2x 3-jaw chucks Kitagawa - OGL gantry loader, approx. 5 kg load capacity - 20-station stacking magazine - Touch setter - Renishaw probe - Extraction unit - Various accessories

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, Used Okuma MA-600HB Horizontal Machining Center Year: 2008 Spindle cooling Max. 6000 rpm Z- 810 mm X- 1000 mm Y- 900 mm Tool magazine for 150 tools Kedpfxjyrf I Ae Ag Uedt 1 spindle 4 axes 10-pallet system We have 2 units available. Price is per unit, ex location.

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: MW137, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3,000 rpm - Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle - Spindle speed: 6,000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of positions: 12 lower turret stations, all driven - Maximum speed: 4,500 rpm; Milling spindle power: 4.5 kW Kdodpfxjxxh Udo Ag Uet Electrical Equipment - Operating voltage: 400V (3-phase), fuse protection: 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3,200 × 2,200 × 1,900 mm; Weight: 5,500 kg Main Features and Capabilities: - Horizontal design: Optimal chip evacuation, parts catcher + custom-made conveyor belt - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Swarf (chip) extraction conveyor - Fire suppression system - Tool measuring system (Q SETTER) - Broken tool detection: Load monitoring with auto-learning analyzer via OSP-P300L-R - Workpiece detection on counter-spindle: Low-pressure compressed air gauges - Spindle cooling system - Documentation: Electronic and print manual available Optional: - Bar feeder: FMB Model: Turbo 10-72XT/3200/A - Bar feeder dimensions (L×W×H): 3,500 × 800 × 1,200 mm; Weight: 1,500 kg Machine status: NOT OPERATIONAL - X-axis encoder: faulty

Condition: ready for operation (used), Year of construction: 2005, operating hours: 31,899 h, spindle motor power: 22,000 W, spindle speed (max.): 4,000 rpm, workpiece diameter (max.): 280 mm, number of axes: 2, This Okuma LVT 300 was manufactured in 2005. A robust vertical turning machine featuring a max. turning diameter of 280 mm and a swing diameter of 320 mm. It offers a rapid traverse rate of 60 m/min on the X-axis and 30 m/min on the Z-axis, with a turning speed range up to 4000 U/min. Ideal for efficient, precise operations, the machine includes 12 tool positions. A great opportunity to buy this Okuma LVT 300 vertical turning machine. Contact us for more information. Machine Benefits Technical Machine Benefits • Max diameter of the parts for the table pallet: 160 mm • Max. Turning height: 200 mm Extra Information • Machine still under power / two machines with interlinking available • Single-shift operation for 7 years • Cutting TIME: • 1st machine: 33,594 hours • 2nd machine: 31,899 hours • 3rd machine: 33,863 hours • 4th machine: 34,408 hours • The machines operate in a linked configuration (2 machines per pair, processing on both sides) Technical Specification Kdedpfozt Nvfsx Ag Uot Taper Size VDI 40

Year of construction: 2007, condition: excellent (used), X AXIS: 762 MM Kdodpepyg Rkjfx Ag Uet Y AXIS: 560 MM Z AXIS: 460 MM SPINDLE SPEED: 15,000 RPM SPINDLE CONE: BT 40 TABLE DIMENSION: 460 X 760 MM MAXIMUM LOAD: 400 KG RAPID FEEDS X/Y AXIS: 40,000 MM/MIN Z AXIS RAPID FEEDS: 32,000 MM/MIN WORKING FEED: 32,000 MM/MIN TOOL WAREHOUSE: 20 PLACES TOOL CHANGE TIME: 1.2 SEC – 3.8 SEC MAXIMUM TOOL WEIGHT: 8 KG MAXIMUM TOOL LENGTH: 300 MM CONTROL: OSP-P200M

Condition: used, Year of construction: 2004, power: 37 kW (50.31 HP), travel distance X-axis: 1,000 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Okuma, total height: 3,280 mm, total length: 6,500 mm, total width: 3,460 mm, table width: 630 mm, controller model: OSP-E100M, spindle speed (min.): 12,000 rpm, table height: 630 mm, Okuma MA-600 HB Space Center OSP E 100M control Dimensions pallet 630 x 630 mm Number of pallets 2x X-axis travel 1000 mm Y-axis travel: 950 mm Z-axis travel 1000 mm Indexing of table 1° Spindle holder MAS BT 50 Ksdsy N Afuspfx Ag Uodt Spindle speed 12,000 rpm Spindle motor 37/26 kW Positions in the tool magazine 60 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2003, functionality: fully functional, For sale: OKUMA MB-500H CNC Horizontal Machining Center Year of manufacture: 2003 Reliable and robust Japanese horizontal machining center equipped with an automatic 2-pallet changer, through-spindle coolant, and chip conveyor. The machine is in working condition and can be inspected under power at our facility in Croatia. TECHNICAL DATA Manufacturer: OKUMA Model: MB-500H Year: 2003 Machine type: CNC Horizontal Machining Center CNC control: OKUMA OSP Kdodpfezxq Itox Ag Ujt WORKING AREA X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Distance from pallet surface to spindle center: 70 – 870 mm Distance from pallet center to spindle nose: 150 – 950 mm PALLET / TABLE Number of pallets: 2 Pallet size: 500 × 500 mm Maximum pallet load: 500 kg Pallet changer: Automatic rotary pallet changer (APC) Table indexing: 1° Pallet surface: 24 × M16 tapped holes The automatic 2-pallet system allows the next workpiece to be set up while the machine is running, significantly reducing non-productive setup time. SPINDLE Spindle speed: 50 – 15,000 rpm Spindle taper: SK40 / MAS 403 SK40 Spindle motor power: 26 kW / 18.5 kW continuous Spindle bearing diameter: Ø70 mm Through-spindle coolant (TSC) AUTOMATIC TOOL CHANGER Magazine capacity: 40 tools Tool holder: MAS SK40 Tool selection: Memory random Maximum tool diameter: Ø75 mm Maximum tool diameter without adjacent tools: Ø145 mm Maximum tool length: 350 mm Maximum tool weight: 8 kg FEED RATES Rapid traverse: up to 90 m/min Cutting feed rate: 1 – 60,000 mm/min EQUIPMENT Automatic 2-pallet changer (APC) 2 × 500 × 500 mm pallets Through-spindle coolant (TSC) Chip conveyor Automatic tool changer 40-tool magazine BT40 spindle Full machine enclosure Coolant system CONDITION The machine has been used in our own production and has been regularly maintained. Machine is fully operational and can be inspected under power. Location: Croatia Inspection and test run are possible by appointment. Additional photos, videos, and information are available on request. Loading/transport can be discussed separately. Price: on request / negotiable

Condition: good (used), Year of construction: 2004, functionality: fully functional, CNC turning and milling center with 9 CNC axes, Okuma MacTurn 350 W, Year of manufacture 2004, OSP-E 100L, Additional magazine, Magazine with 80 tool positions, Main spindle with C-axis, Counter spindle with C-axis, Y-axis slide at the top / milling spindle, HSK 63 tool holder, Stepless B-axis as milling spindle, Distance between centers 1500 mm, Spindle bore 80 mm, Max. turning diameter 550 mm, Turning diameter 350 mm, Turret at the bottom with 12 tool positions and driven tools, Kjdpfxez Dguds Ag Uodt Interlite compact filter system 900 l, Extraction system, Spindle operating time approximately 18,300 hours, Chip conveyor, Tool changer gripper arm completely renewed, High-pressure coolant, Coordinate measuring machine (CMM) measuring arm, Tool changer overhauled, Main spindle Kitagawa B - 210, Counter spindle Kitagawa B - 208.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, CNC Turning and Milling Center Okuma Multus B300II-W Control: OSP-P 300SA Year of manufacture: 2022 Kdedjy Ewy Sepfx Ag Uot Internal machine no. 55 X-axis: 580 mm Y-axis travel: (+80/-80 mm) 160 mm Z-axis: 935 mm B-axis: up to 225°, positioning in 0.001° increments W-axis: 1,000 mm Turning length: 900 mm Turning diameter: 630 mm Tool holder: HSK A63 Tool magazine: 40 positions Equipment: - Tool monitoring system - Tool measuring device - ONE touch IGF - Hinged belt conveyor - Coolant tank incl. 20 bar pump - Preparation for in-process measurement - Tool height adjustment in Y-axis for turning tools - Hi-Cut Pro high speed control

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, total height: 3,000 mm, total width: 3,270 mm, table load: 400 kg, overall weight: 8,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 32, tool weight: 8,000 g, product length (max.): 300 mm, number of axes: 3, This 3-axis Okuma ACE CENTER MF-46VA was manufactured in 2006. It features an X-axis travel of 762 mm, Y-axis travel of 460 mm, and Z-axis travel of 460 mm. The machine is equipped with a maximum spindle speed of 15,000 rpm and an automatic tool changer with 32 stations. If you are looking to get high-quality machining capabilities, consider the Okuma ACE CENTER MF-46VA vertical machining centre we have for sale. Contact us for further details. • Distance table to spindle nose: 180–640 mm • Rapid traverse (X/Y): 40 m/min • Rapid traverse (Z): 32 m/min • Maximum cutting feed: 32,000 mm/min • Positioning accuracy (X/Y/Z): ±0.004 mm (JIS) • Repeatability (X/Y/Z): ±0.0015 mm (JIS) • Pallet changer: 2 pallets, rotary automatic pallet changer • Pallet size: 760 × 460 mm Kdsdpfx Ajy Uxuisg Uet • Pallet T-slots: 3 × 18 mm, 125 mm pitch • Pallet change time: 6.0 s • Spindle speed: 15,000 rpm (upgrade from 8,000 rpm) • Spindle motor power: 22 / 18.5 kW • Max spindle torque: 199 Nm • Thermal compensation: TAS-S (spindle) and TAS-C (structure) • ATC capacity: 32 tools (upgrade from 20), random management • Tool change time (adjacent): 1.2 s • Max tool diameter: 90 mm (125 mm with adjacent pockets empty) • Max tool length: 300 mm • CNC functions: Hi-2 NC with NURBS, Super Hi 2 NC profile management, synchronized rigid tapping, helical cutting, spindle cutting load monitor, IGF conversational programming, RS-232-C interface, 3.5" floppy drive • 4th axis capability: prepared for 4th axis integration • Documentation: operator manuals and CE declaration of conformity included Additional equipment • Tool breakage detection sensor (table-side mounted) • Prepared for Renishaw zero-offset part probe (probe not included) • “Shower” type work area coolant wash system • Belt-type oil skimmer on coolant tank Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 925 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 600 mm, table load: 600 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, number of axes: 5, This 5-axis Okuma MU 6300 V was manufactured in 2016. It features impressive X-axis travel of 925 mm, Y-axis travel of 1,050 mm, and Z-axis travel of 600 mm. The machine has a maximum load capacity of 600 kg and a C-axis table diameter of 630 mm. If you are looking to get high-quality machining capabilities, consider the Okuma MU 6300 V vertical machining centre we have for sale. Contact us for further details. • Table/C-axis diameter: 630 mm • Max machinable dimensions: Ø 830 x 550 mm • C-axis rotation: 360,000 positions / 360° continuous • A-axis rotation: +90° to -120° • Table–spindle distance: 60 – 660 mm • Rapid feed (X/Y/Z): 50 m/min • Max working feed: 50,000 mm/min Kjdjy Dc Niepfx Ag Ujdt • Positioning accuracy (X/Y/Z): 0.004 mm (Std JIS) • Repeatability (X/Y/Z): mm (Std JIS) • Spindle taper: BT50 Big Plus • Tool magazine: Matrix, 98 positions (expandable to 166) • Axis feedback: X–Y–Z optical scales • Operational hours: Power on 25,683 h; Operating 10,364 h; Cutting 9,209 h • Included control/software options: 5-axis continuous Super-NURBS kit, Center tool programming, Tool length compensation, DNC-DT connection, Tool orientation command Additional equipment • Mayfran MT10 chip conveyor • Renishaw TS27R tool setter • Renishaw RMP60 workpiece probe • 5-axis calibration kit • Shower wash • Pallet changer ready (preparation) • Industry 4.0 kit (registered 2026) Technical Specification Taper Size BT 50

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 5-axis CNC turning and milling center Okuma Multus B550-C 2000 Control: OSP-P300SA-H Year of manufacture: 2019 Internal machine number: 71 Travel distances: X-axis: 925 mm Y-axis: 520 mm Z-axis: 2,215 mm Distance between centers: 2,000 mm Turning diameter over bed: 830 mm Spindle bore: 112 mm Tool holder HSK-A100 40-position tool changer Programmable steady rest with hydraulic quill Equipment Kodpfx Aezwulysg Uodt - Chip conveyor Interlit ISF - Full-stroke cylinder - 6-jaw power chuck SMW Ø 500 IEP - Manual rinsing gun - Drum – trough filter TMF300/980/20 - IFS filter system IFE 5000 - Robot interface Type E - One Touch IGF - Software for input resolution of 0.1 µm - Software package for simultaneous 5-axis machining VTM-1200YB and VTM-2000YB - In-process measurement with Renishaw measuring probe for X/Z/C axis - Automatic zero point adjustment in the Z-axis of the main spindle - High-precision C-axis - Turning function for NC B-axis - Interpolation turning with the X/C/Z axes

Condition: ready for operation (used), operating hours: 11,525 h, functionality: fully functional, machine/vehicle number: 0613, travel distance X-axis: 1,500 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 610 mm, controller model: Okuma OSP7000M, spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Travel in X-axis: 1,500 mm Travel in Y-axis: 630 mm Travel in Z-axis: 610 mm Distance from spindle nose to table surface: 230–840 mm Distance from spindle center to front of column: 730 mm Main spindle Kjdpfx Agsztpmdo Ujdt Spindle speed range: 10–5,000 rpm Continuously variable speed control Spindle taper: 7/24, No. 50 Tool holder: BT50 Angle: 90° Diameter of front spindle bearing: 100 mm Work table Effective table size: 1,530 × 630 mm Table size: 1,800 × 780 mm Maximum table load capacity: 1,500 kg T-slot width: 18 mm Number of T-slots: 5 T-slot spacing: 125 mm Distance from table surface to bottom edge of machine bed: 830 mm Feeds Rapid traverse X/Y-axis: 15,000 mm/min Rapid traverse Z-axis: 13,000 mm/min Cutting feed X/Y/Z-axis: 1–10,000 mm/min Average continuous cutting feed: 1–2,000 mm/min Tool changer Number of positions in tool magazine: 20 Tools included in the machine MACHINE DETAILS Control model: Okuma OSP7000M Operating hours (as of 12.04.2026) Power-on hours: 59,180 h Operating hours: 16,510 h Machining hours: 11,525 h Dimensions & weight Machine dimensions (L × W × H): 4,570 × 4,530 × 3,265 mm Weight: 11 t EQUIPMENT Kitagawa NC rotary table TSR180A Handheld terminal Mac mini IH Oil skimmer Chip conveyor Tools included in the machine Machine manuals Original tolerance reports Parameter backup / Backup of machine parameters