Used Okuma Mx 45 Vae for sale (190)

Condition: excellent (used), Year of construction: 2013, operating hours: 1,719 h, functionality: fully functional, feed length X-axis: 470 mm, feed length Z-axis: 2,040 mm, feed rate X-axis: 5 m/min, feed rate Z-axis: 10 m/min, turning diameter over cross slide: 650 mm, turning diameter: 1,030 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, overall weight: 23,000 kg, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Max Turning Dia: 650mm Psdpfxjxzgkij Ah Uorf Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia 12 Station Upper Turret Swarf Conveyor Coolant System

Condition: good (used), CNC control, control panel, machining center -Removed from a: CNC lathe, manufacturer: Okuma, type: LB15 -complete unit Pedpfx Asdtcrkjh Ujrf -Dimensions: 790/600/H495 mm -Weight: 79 kg

Condition: excellent (used), Year of construction: 2010, turning length: 995 mm, spindle bore: 80 mm, Max. turning Ø: 530mm X-Axis: 260mm Z-Axis: 995mm Spindle bore: 80mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:6000Rpm Subspindle bore: 62mm Subspindle power:11kW ATC / revolver: 12 Speed live tools:6000Rpm Tool eye: yes Hours: 2800H Length: 3000mm Width: 1800mm Height: 1900mm Prjdpjx I Nbtjfx Ah Uef Weight: 6350kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2002, OKUMA Euro Center V50 Year of construction 2002 Control system OSP-U100L Travel distances X-1020 Y-510 Z-525 Table load 680kg Clamping surface 1200x510 Tool changer 20 magazine places Prsdjrfw Nhopfx Ah Uef chip conveyor

Condition: excellent (used), Year of construction: 2014, operating hours: 2,050 h, functionality: fully functional, CNC Turning and Milling Center Okuma Multus U4000 2SW 1500 Control: OSP-P 300S-H Year of manufacture: 2014 Spindle hours: 2,050 h Travels: X-axis: 695 mm Y-axis with stroke: +150 / -150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° increments C-axis: 360°, positioning in 0.001° increments W-axis: 1,524 mm Turning diameter: 650 mm Turning length: 1,500 mm Tool holder: HSK 63 Prodpsx I D Ubsfx Ah Usf Total number of tool stations: 40 Equipment: XA and YA axes with direct absolute measuring system (Okuma ABSO-Scale) In-process measuring with Renishaw probe for X/Z axis Measuring in Y-axis, including inclined-axis measurement mode Kitagawa B215A11 max. 2,800 rpm Kitagawa B210A8 max. 4,200 rpm Hollow clamping cylinder Kitagawa F 2596-H01 Ø96 mm One-Touch IGF Multi-function tool software Harmonic spindle speed oscillation Simultaneous 5-axis machining software package Chip conveyor Coolant tank with high-pressure pump 70 bar

Condition: used, Year of construction: 2014, Technical details: x-travel: 760 mm y-travel: 760 mm z-travel: 760 mm total power requirement: 43 kW weight of the machine ca.: 11,5 t dimensions of the machine ca.: 2,7 x 4,73 x 2,87 m Psdpoxrwpdofx Ah Usrf max. table loading capacity: 500 kg

Condition: excellent (used), Year of construction: 2013, operating hours: 1,800 h, functionality: fully functional, turning diameter over cross slide: 650 mm, turning length: 1,750 mm, turning diameter: 650 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 2,040 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Predpfx Aoxzi D Soh Uof Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Max Turning Dia: 650mm Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia 12 Station Upper Turret Swarf Conveyor Coolant System

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 100277, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 280 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 500 mm, TECHNICAL DETAILS X-axis: 280 mm Y-axis: 120 mm Z-axis: 500 mm C-axis: 360° (0.0001°) Spindle speed: 4,500 rpm Spindle bore: 62 mm Psdpjx I Axrjfx Ah Uorf Chuck diameter: 10 inches MACHINE DETAILS Control: OSP U 100 L Weight: 6,000 kg EQUIPMENT Driven tools Chip conveyor Transformer Manuals

Condition: good (used), We will only answer inquiries with your name and complete company name. Prodpfxsixui Io Ah Uof Machine is newly arrived. Data will follow shortly. Machine can be inspected under power at the Aachen location. Delivery at short notice by arrangement.

Year of construction: 1995, condition: ready for operation (used), Main Drive Number of axis 2 Prodpfx Aox D R N Ish Ujf Movement X-Axis Movement 405 mm Y-Axis Movement 1505 mm This Okuma LH35-N was manufactured in 1995. A robust horizontal turning machine, it offers reliable performance for various machining tasks. If you are looking to get high quality turning capabilities consider the Okuma LH35-N machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Okuma OPUS 5000 GHP Power Supply 5000T SN: 00198 , serial no. according to photo ,used, normal signs of wear, 100% functional Prjdpfx Aji Ecaroh Uof

Condition: good (used), Year of construction: 2012, Datasheet: Travels: Prjdpeq Dpuzsfx Ah Usf Turning length: 1,000 mm Turning diameter: 360 mm X-axis: 260 mm Z-axis: 1,000 mm C-axis: 0.001 degrees Spindle machining diameter: 410 mm Swing over bed: 580 mm Main spindle: Cross section: 80 mm Spindle drive: 22 kW Spindle speed: 5,000 rpm Torque: 427 Nm Weight and dimensions: 6,000 kg LxWxH: 3,000x1,800x2,3000 mm Touchsetter NC tailstock 12-position turret with driven tools Kitagawa B210 chuck Mayfran chip conveyor 8 bar coolant pump

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, OKUMA V-Turn LVT 400 CNC Vertical Turning Lathe (2 machine cell) Model: LVT 400 Control: OKUMA OSP 1000L Year: 2006 Pjdpfxjxwy S Ej Ah Ujrf 12 – tool turrets Hi – Power 60 Bar High Pressure coolant Swarf Conveyor Work Measurement Carousel System linking with both machines with turnover station

Condition: good (used), Year of construction: 1990, 2. Turret disks with tool holders. For CNC lathe OKUMA&HOWA 2SP Prodpfxsxr Diws Ah Uef

Condition: used, turning diameter over bed 460 mm turning dia. over face-slide 256 mm turning length 1250 mm centre distance 1250 mm centre height 230 mm spindle bore 55 mm spindle turning speed range 35 - 1800 U/min Predpfx Aexwp Ebsh Usf weight of the machine ca. 2,7 t dimensions of machine L x W x H 2,75 x 1,20 x 1,42 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head with 3 inserts, solid steady

Year of construction: 2006, condition: ready for operation (used), Control Unit Brand OKUMA Model OSP-P200L This Okuma LU300-M was manufactured in 2006. A robust horizontal turning machine featuring a spindle bore of 62mm and speeds up to 5000 RPM. It includes dual turrets with 12 and 8 positions respectively, enhancing its versatility. Equipped with a Mayfran chip conveyor and OSP-P200L control for efficient operation. Consider the opportunity to buy this Okuma LU300-M horizontal turning machine. Contact us for more information about this machine. Predpfxox D Nf Ie Ah Usf Application Types Turning

Condition: ready for operation (used), Okuma BL-D30A Servo Drive SN: 22-100 , serial no. according to photo ,used, normal signs of wear, 100% functional Podpfxji Ecace Ah Usrf

Condition: ready for operation (used), Year of construction: 2007, Control Unit Pjdsx D Nf Uspfx Ah Uerf Brand OKUMA Model OSP-P200M Main Drive Spindle speed range 15000 rpm Movement X-Axis Movement 560 Y-Axis Movement 610 Z-Axis Movement 625 This 4-axis Okuma MA-400HA horizontal machining center was manufactured in 2007. It features a 560mm X-axis, 610mm Y-axis, 625mm Z-axis, and a table size of 400x400mm. The machine includes a 15,000 rpm spindle, 100-tool matrix magazine, and OSP-P200M control. It also boasts a 6 APC/pallet pool and a Mayfran Consep 2000 chip conveyor. Consider the opportunity to buy this Okuma MA-400HA horizontal machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Okuma BL-D30A Servo Drive SN: 22-102 , serial no. according to photo ,used, normal signs of wear, 100% functional Prsdpfx Ahei Ecags Uef

Condition: ready for operation (used), Year of construction: 2004, Control Unit Brand OKUMA Model OSP-E100L Pedpsx D Npmefx Ah Uorf Main Drive Number of axis 3 This 3-axis Okuma VTurn LVT300-M was manufactured in 2004. It features a vertical turning machine design, complete with a load and unload table. Ideal for those looking to get high-quality turning capabilities, consider the Okuma VTurn LVT300-M machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Okuma DC Power Supply 6 Axes PCB with E4809-436-002-A, used, normal signs of use, 100% functional Psdpji Ecakjfx Ah Usrf

Condition: ready for operation (used), Year of construction: 2003, Control Unit Interface HSK 63 Brand OKUMA Model OSP-100L Main Drive Number of axis 5 Prsdpfex D Ipxox Ah Usf Tools Number of index 40 Max tool length 1500 mm Additional Equipment Autodoor This 5-axis Okuma MacTurn 350 was manufactured in 2003. It features an HSK 63 tooling system and can accommodate up to 40 tools. The machine includes an autodoor and supports a turning length of 1500 mm. Consider the opportunity to buy this Okuma MacTurn 350 Turn-mill centre machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Okuma 1006 inverter BLII-D50A Vers.1.2 consisting of board E4809-820-006-A + board E4809-770-069-A, used, normal signs of use, 100% functional, scope of delivery as per photos Psdpfx Ahot Izafe Usrf

Year of construction: 1997, condition: ready for operation (used), Control Unit Brand OKUMA Model OSP7000L Main Drive Pedpfx Aox D Rwxoh Ujrf Number of axis 4 This 4-axis Okuma LU2-M was manufactured in 1997. It features a turning length of 1500 mm, ideal for horizontal turning machine applications. Consider the opportunity to buy this Okuma LU2-M horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2005, Control Unit Brand OKUMA Model OSP E-100M Main Drive Number of axis 4 Additional Equipment Balluf read/write Renishaw MP10 30 Bar coolant Mayfran Consept 2000 Predex D Nlzjpfx Ah Usf This 4-axis Okuma MA-600HB horizontal machining center was manufactured in 2005. Ideal for complex machining tasks, it offers robust construction and precision. Consider the opportunity to buy this Okuma MA-600HB horizontal machining center. Contact us for more information. Application Types Milling