Used Optimizing Cross Cut Saw for sale (26,187)

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 98125446, saw blade diameter: 500 mm, cutting height (max.): 75 mm, positioning accuracy: 1 mm, cutting width (max.): 180 mm, CNC full optimization cross-cut sawline PAUL 11MKL for soft and hard wood. Tsdsxrr S Hepfx Adief Line include : infeed conveyor with length 11525 mm, double side table for marking wood defects, measuring station with luminescence and light barrier for wood start and end detection, sawing station and outfeed conveyor 11500 mm sorting line with 5 side pushers to sorting table. Wood input length 2000-6000 mm Wood width 30-180 mm Wood thisckness 6-75 mm Min cross-section 30x15 mm or 45x6 mm Max cross-section 130x75 mm or 180x45 mm Saw blade diameter 500 mm Saw motor 5.5 kw , saw stroke pneumatic, saw cycles 0.4 sek Feed speed max 200 m/min Power consumption 11.4 kw Control software CNC MAXI 5 Premium Line is in full working condition

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Log feeder, chain log infeed, and chain log conveyor – 20 m Minimum log length: 5 m Maximum log length: 14 m Holtec ES 120 – Cross-cut saw (Year of manufacture: 1995) For cutting and trimming wood in industrial applications Chain log conveyor – 4 m Tjdpfx Adjwlaxkeijf Cassel Metal Shark® Octa – Metal detector Outfeed roller conveyor + transfer table – 7 m Control cabin Hydraulic operation Condition: perfect Manufacturer: Holtec Type: ES120 Year of manufacture: 1995

Year of construction: 1984, condition: excellent (used), Blade diameter: 550 mm Minimum cutting length: 500mm Minimum cutting width: 100mm Maximum cutting height: 160 mm Tjdpfx Adjlrtntsief Minimum cutting height: 40mm Pneumatic clamps

Condition: used, Cross-cut saw BERG & SCHMIDT Junior 275 -used- Tjdpfx Aeu R S I Hodijf Underframe, carriage ----- Technical data ----- Cutting height: 60 mm, Voltage: 230 V

Condition: used, No. 04480 Cross-cut and mitre saw Graule ZS 135 N Used This machine type is used for cutting to length and for horizontal and vertical miter cuts, double mitre cuts are also possible Precise ball bushing guide of the tool slide on hardened and ground steel shafts Fast mitre adjustment up to 25° horizontally and up to 45° vertically Adjustable fixed stops at 90° and 45° Machine can be set to mitre in 2 planes Adjustable aluminum stop plates Sturdy cast iron construction Lower saw blade guard can be connected to extraction system 3 kW three-phase 400 volt brake motor (special equipment) Saw blade diameter 350 mm, Saw blade holder 30/40 mm, cutting height 135 mm, cutting length 430 mm, saw blade inclined at 45°: Cutting height 92 mm Including saw blade for aluminum 350 mm diameter Including machine stand for type ZS 135 N Including roller conveyor RLK 3000 x 350 mm, with length stop with scale and material stop that can be folded back, roller diameter approx. 40 mm Transport dimensions machine approx. 1300x700x1700 mm LWH, roller conveyor approx. 3000x500x800 mm LWH Weight approx. 300 kg Tjdpfxow Htm Ro Adisf To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2007, Infeed : 4000mm with digital pusher Outfeed : 4000mm with rollers Main engine : 1,1 Kw Saw blade Ø : 420mm/30mm hole Saw blade rpm : 2800 2 x pneumatic clamps Saw blade adjustment : -25/90/+22 degree Tjdpfx Aov E Eccedisf Original maunals included

Condition: excellent (used), IM Very good condition. Tedpfx Adoxcllueiof

Condition: used, Double cross-cut saw / format saw Rüco 21 for cutting, trimming and shortening wood or panels. Tsdpfx Aelfdx Uediof saw: 3 cutting width: max. approx.: 2,050 mm Depth of cut: max. approx.: 2,200 mm Cutting depth: max. approx.: 2,200 mm cutting height: max. approx. 100 mm More technical data: see PDF Further technical data: see PDF

Condition: new, Year of construction: 2024, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Todpfohw Ng Iex Adijf Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device

Condition: new, GRAULE ZS 85 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 85 N cross-cut and mitre saw - inclinable - Material feed shoulder made of laminated wood - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 85 N to ZS 170 Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Tsdpfx Adju R Syceisf Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm - new exhibition machine -

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3940x850x1350 mm Weight 410 kg Todpfxevz Eyto Adief Total power requirement 5,5 kw

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, saw blade diameter: 600 mm, working height: 900 mm, saw drive: 7,500 W, Mitre saw adjustable to 45° equipped with 6-meter pusher discharge deck with 6-strand loading chains for faster loading machine overhauled and fitted with a new digital touchscreen Todpfx Adswzg E Neisf

Condition: new, - NEW -Description:- Robust welded steel construction- Workpiece is automatically fixed with each cut by saw blade cover- The saw blade is moved upwards via a pneumatic cylinder and dips back into the machine body after each cut- Saw blade feed infinitely variable via adjusting screw on the front of the machine- Effective chip and intrusion protection made of Plexiglas- High operating safety due to two-hand control- Standard with 1m roller conveyor to the left and right of the machine, and material stop with scale- Saw blade change via large side doorTechnical data:General informationSaw blade speed(s) 3000min¯¹Saw blade diameter 500mmSaw blade bore 30mmSaw blade thickness 4mmMitre angle noSuction nozzle diameter 125mmSound pressure level89dB(A)Dimensions and weightsLength (product) approx. 3000mmWidth/depth (product) approx. 1600mmHeight (product) approx. 1500mmWeight (net) approx. 700kgElectrical dataPower drive motor 6kWMotor speed 2900min¯¹Total power consumption 15.5ASupply voltage 400VMains frequency 50 - 60HzStandards and approvalsEMC class APneumatic connectionAir consumption approx. 33l/minPneumatic working pressure 6 - 8barCutting areasCutting capacity 0° (square) solid material 160 x 160mmCutting capacity 0° (rectangular) solid material 400 x 100mmScope of delivery:- 1 m infeed roller conveyor, to the right of the machine- 1 m outfeed roller conveyor including manual material stop with scale, to the left of the .: 5651500 Tjdovwfluspfx Adiof

Condition: excellent (used), functionality: fully functional, cutting height (max.): 100 mm, cutting width (max.): 150 mm, cutting length (max.): 352 mm, total width: 800 mm, total length: 4,150 mm, total height: 1,300 mm, saw blade diameter: 330 mm, overall weight: 600 kg, type of input current: three-phase, disc diameter: 330 mm, rotational speed (max.): 2,800 rpm, BLITZ 330-L double mitre saw for wood, aluminium Specification: • Condition – used, after inspection/service • Manufacturer – BLITZ • Model – 330-L • Main motors – 2 x 1.5 kW and 2,800 rpm • Pneumatic head control • Max. cutting length – 352 cm • Min. cutting length – 38 cm • Max. cutting cross-section – 100x150 mm (at right angle) • Max. blade diameter – 330 mm • Spindle axis – 20 mm • Miter cutting range – from -45 to +45 degrees (right, left) • Vertical workpiece clamps • Weight – approx. 600 kg • Overall dimensions – 415 x 80 x 135 cm (L x W x H) Additional information: • Very good, factory technical condition • Photos shown reflect the actual condition of the item for sale Tjdpfx Aoxl Eadjdisf • Possibility to power up and test the machine on site

Condition: used, Year of construction: 2007, No. 3177 Optimizing cross-cut system Grecon Dimter OptiCut 200-1 Used, year of construction 2007 Todpfsu Atmujx Adief For cross-cutting fixed lengths Wood dimensions to be processed: Input lengths min./max. 3000 - 5000 mm Input widths min./max. 80 - 200 mm Input thicknesses min./max. 38 - 80 mm Timber cross-sections max. 200 x 50 Final timber length min./max. 700 - 1000 mm Average number of cuts / board 5 Wood types: Softwood or hardwood Performance of the system: Feed speed max. 180 m/min, infinitely variable Time per cross-cutting process incl. brakes 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt in front of saw Length 1.5 m coupled with feed motor of the saw Item 2: OptiCut 200-1 automatic cross-cut saw in left-hand design With built-in length measuring wheel and built-in blow-out device for waste Graphics-capable input terminal, 1 / 4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is fed from the left Pos. 3: Outfeed conveyor belt / sorting station with drive unit, without ejector Belt length approx. 1.5 m Machine already dismantled and stored The infeed table was not used by the previous owner. 2 feed rollers were installed for the material feed. The conveyor table is there, only the rubber belt is missing. Sale on behalf of customer, ex location Austria, without transportation and assembly Errors in description and price excepted Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, GRAULE ZS 170 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 170 N cross-cut and mitre saw - tiltable - - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 135 N and ZS 170 N Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Tjdpfx Aju R Sypsdijf - new exhibition machine -

Condition: like new (used), Year of construction: 2024, Technical specifications: - Motor power 2.2 kW S1 - Max. Saw blade diameter: 350 mm - Saw blade holder: 30 mm - Cutting time per stroke: 1.5 sec. - Speed ​​on the saw shaft: 3800 rpm - Air consumption per cycle: 5 L - Working table height: 900 mm - Extraction nozzle: 2x100 mm - Operating pressure: 7-8 bar - Net weight: approx. 200 kg - Required air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase - Cutting capacity in mm: 45 x 230 60 x 210 90 x 180 100 x 125 Standard basic equipment: - Saw blade feed pneumatic drive - Automatic engine brake Tjdofhbuyspfx Adief - Set of operating keys - Emergency stop push button - Speed ​​control for saw blade feed - Fixed vertical protection device - Upper safety pressure device (pneumatic protective hood) - Suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Condition: used, OMGA T421 IDC000097 Tjdpfx Aeu Dhupjdisf - saw blade diameter: 400 mm - complete with saw dust filter

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, OMGA V 235 - precise cutting from the program, - with a controlled ruler, (with a stop) Tjdpfx Aew Tc Hrodief - 3.7Kw, 350mm sheet size.

Condition: new, Year of construction: 2024, Customizable Sawing Machine: The Ideal Solution for Small and Medium Sections Total Optimization, High Precision, and Maximum Speed in One Tool Tedpfx Adjv Ip Uzeiof TRV 1200 is the perfect saw for tackling the daily challenges of processing single boards, whether raw or painted. With its advanced technology, this ultra-fast and efficient cutting system allows you to optimize each operation without stress for the operators. Whether for small or medium sections, the TRV 1200 is designed to meet all your needs, with a continuous work cycle that ensures flawless performance. Intelligent Operation and Full Automation With the innovative touch screen, you can easily upload cutting lists directly from the device or remotely, from your office. Once you select the desired optimization, the system autonomously handles all subsequent stages, including: Material introduction (*see Cursal accessories) Automatic advancement and positioning Immediate data transmission to the CNC and optimization Piece evacuation Quality, width, and length selection (*see Cursal accessories) Maximum Speed and Precision Without Compromise With TRV 1200, speed is exceptional: 195 m/min, self-limited by the Brushless servo motor. The synergy of a high-performance optimizer, an indestructible machine structure, and precise table control ensures flawless results. The CNC-driven motorized belts and pneumatic pressure wheels guarantee perfect material positioning. Total Versatility for Every Type of Processing The TRV 1200 perfectly adapts to various applications, from recovery work to defect cleaning, or even more complex tasks that require advanced software processing. It is the ideal partner for optimizing every phase of the process, ensuring maximum results with minimal waste. Advanced and Easy-to-Use Programming Software Over 100 preset cutting plans: customizable widths, quality, and cutting specifications Different optimization options: for commercial value, for scrap, for quantity, for length, and mixed optimization Optimization simulation to ensure the best material management Continuous monitoring of worked quantities Internal optimization within the machine body to simplify the process and save valuable space Advanced Numerical Control for Efficient Management The heart of the TRV 1200 is the powerful CNC, an industrial computer that ensures continuous production without stoppages. With the HD touch screen, you can easily import data via USB and access simple yet powerful software, quick to learn and easy to use. Moreover, you can rely on online remote assistance for real-time troubleshooting. Discover how TRV 1200 can transform your production: speed, precision, and optimization at your fingertips.

Condition: excellent (used), Year of construction: 1993, functionality: limited functionality, machine/vehicle number: 6145, cutting height (max.): 75 mm, cutting width (max.): 200 mm, cutting length (max.): 6,000 mm, saw blade diameter: 450 mm, type of input current: three-phase, cross cutting line with infeed opticut and 6 automatical packing/stacking units , partly renovated ( more details by contacting ) Todpfxsw I Dpqo Adief

Condition: used, Double rip saw IDL000811 - max width: 2500 mm - electric cabinet Tjdpou At Tbjfx Adisf - manufacturer: Tegle/norway

Condition: new, Year of construction: 2025, Angled Cutting for Single Boards and Packs of Boards: Efficiency and Precision Without Compromise The TRGSI, just like the TRSI, is a monoblock system designed to ensure outstanding installation speed and effective vibration reduction. A true innovation powerhouse for achieving flawless results in record time! Programmed Cutting for Single Boards and Packs Fixed Measurements and Customized Sequences: Thanks to the ability to manage various cutting schemes, it’s easy to set up fixed or sequential cuts, optimizing every operation. Industrial CNC Technology: An advanced system that allows for the quick storage of different cutting plans. Up to 25 different measurements can be managed simultaneously, with angled heads and independent options for every specific need. Todpjv Iqd Rjfx Adiof Customizable Cutting Programs: Work parameters (such as quantity and waste) are easy to set and can be customized according to individual preferences. Each cutting plan can be saved for quick access. Easy Program Loading: Cutting programs can be uploaded via USB in just a few steps, with files in .txt format for practical and fast management. Advanced Optimization: Two cutting versions to maximize efficiency: OL Version optimizes length, while the E Version offers total optimization, minimizing waste. Operating Dynamics Fast and Precise Movement: The steel guide with ball recirculation and dual sliding carriage, powered by brushless motors, ensures unmatched speed and accuracy. Durability and Perfect Sliding: The reinforced structure ensures optimal sliding, increasing the system's durability and reliability. Pneumatic Pusher: Equipped with fully protected and highly visible stroke, the pneumatic pusher system ensures maximum control and precision. Perfect Angling and Precision: The synchronization between the lateral arm before the blade and the pneumatic presses guarantees a perfect cut, both in quality and angle. Advanced Accessories for Loading and Unloading With dedicated accessories, the system can be configured for manual or fully automatic loading and unloading operations, ensuring an uninterrupted workflow.

Condition: new, Year of construction: 2025, TVM Ø 400 - The Versatile and Customizable Saw for Your Carpentry Workshop The TVM 400 is the all-purpose saw that is essential for your workshop. With a solid and high-performance structure, it is designed to provide an excellent solution for cutting small-section woods, quickly eliminating knots and imperfections. Thanks to the option of customizing it with accessories such as roller conveyors and stops, the TVM 400 ensures maximum versatility and productivity (discover more details in the ACCESSORIES section). Key Features: Efficient and Cost-Effective: Ideal for small and medium-sized carpentry workshops, offering excellent value for money. Ease of Use: Perfect for use without the need for highly skilled personnel, saving time and resources. Reliability: Always ready for use, supporting all operational needs and reducing machine downtime. Todpfsv Iqaxjx Adisf Cost Optimization: With the TVM 400, you get a durable machine that doesn’t require frequent maintenance interventions. Advantages: Operator safety ensured by a design aimed at reducing risks. Optimized ergonomics to improve productivity during processing stages. Wear compensation of materials without the need for frequent replacements. Simplified maintenance to reduce costs and increase efficiency. Ready for CURSAL accessories, offering full customization according to production needs. Rationalized cost/quality ratio, making the machine a smart investment. Applications: Production of semi-finished wooden furniture components. Manufacturing of window frames and similar applications. Small-batch production of various types, for specific needs. TVM Ø 500 - The Advanced Solution for High-Volume Production The TVM 500 is one of the most in-demand saws on the market for its ability to handle high-volume production with quality and precision. The optimal cutting section allows for the processing of 90% of squared boards and is perfect for industries that require high performance, such as packaging, construction, and the production of sofa frames and laminated panels. This machine offers maximum flexibility and precision in operations, thanks to advanced features such as: Electropneumatic stops, ideal for cutting stacked boards with repetitive measurements. Numerically controlled stops, for precise measurement management, even in complex processes. Discharge of semi-finished products via transfer systems, discharge tables, or roller conveyors, ensuring smooth and fast material handling. Main Advantages: High productivity for large-volume applications. Versatility in sizes and configurations, adaptable to multiple industries. Operational flexibility supported by advanced accessories. The TVM Ø 500 represents a strategic choice for those seeking a saw capable of meeting the most demanding challenges in the industry, while maintaining high standards of quality and efficiency.

Condition: new, Year of construction: 2025, TRV 1700: High-Performance Optimizing Saw for Finger Joint and Moulders The TRV 1700 is the ultimate solution for woodworking professionals, offering precision, speed, and advanced optimization. Designed in three different configurations with Ø 500, 550, and 600 mm blades, this optimizing saw is available in the following versions: TRV 1700A – Automatic with programmed cutting TRV 1700E – EB – Optimized cutting to maximize yield and reduce waste TRV 1700S – Simple cutting on mark for essential operations Thanks to its high versatility, the TRV 1700 is perfect for quickly removing knots and defects from wooden boards. It is the ideal machine for applications where maximum length is a priority, such as parquet flooring, or when only defect selection is required. Advanced Optimization Software Over 100 cutting plans, customizable by width and quality Smart optimization algorithm for: Commercial value Waste reduction Quantity Length Mixed optimization Pre-cut simulation for maximum efficiency Real-time monitoring of processed quantities Integrated optimization within the saw, simplifying the workflow Machine Structure & Technical Features Reliable conveyor belt traction system without adhesive parts Non-slip rubberized pressure wheels, suitable for all materials Thick pressor for safe clamping of chips and irregularities PLC-controlled silent blowers for continuous workspace cleaning The TRV 1700 integrates seamlessly with moulders and finger jointers via Cursal’s feeding systems, ensuring a smooth and efficient in-line production process. Todpfsv Iqbpjx Adijf With a wide range of customizable accessories (see the dedicated section), it can be upgraded from a standard version to a fully equipped high-end configuration. Recommended Applications Parquet flooring – Ideal Windows and construction – High compatibility Furniture components – Well-suited Laminated beams, planks, structures – Well-suited Finger joint recovery – Ideal Choose the TRV 1700 for optimized cuts, reduced waste, and maximum production efficiency.