Used Paint Drumming for sale (6,943)

Condition: new, Year of construction: 2026, Drum chipper series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces Dodowbv Erjpfx Al Sjku - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: used, Spray enclosures, Paint fume, Used equipment Manufacturer: Kematechnik Type: IM-SZ-1,5-4000 Overall dimensions: Dodpfx Aljw Tt Tve Soku Width: 1500 mm Depth: 2550 mm Height: 2230 mm Year of manufacture: 2017 Airflow capacity: 4000 m³/h Motor power: 2.2 kW

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 66184003, type of input current: three-phase, The details pertaining to the machine are provided below. 1)The quoted price pertains to the machine labeled as No. 1 in the drawings provided in the images. 2)The other units shown in the image, which are designed to operate synchronously with the machine, can also be quoted upon request. -Unit No. 2 functions as a large vibration conveyor and is the initial unit onto which the logs are loaded. -Unit No. 4 is used as a small vibration conveyor and includes a screen for separating smaller products. -Unit No. 5 is a product transfer conveyor equipped with a metal detector unit. -Unit No. 3 is a screw conveyor. It is positioned beneath Machine No. 1 and transfers the chips to the product transfer conveyor. -Unit No. 6 transports the produced chips to the designated area. Dkedpfxow U A Sks Al Sju Chipping Height : 380mm Chipping Width : 650mm Rotor - Diameter : 1200mm Number of Knives : 3 chipping knives and 1 counter-knife Infeed Capacity : Approx 30-40 t/h (Depends on kind of material, material mixture, type of feeding and humidity) Chipping Length : Approx. 25mm Electric Motor : 2 x 125kW Voltage : 380-400V Geared Motors : 2 x 11kW Sew Eurodrive Infeed Rollers : 9 Pcs Feeding : Horizontal Drive : By Belt

Condition: new, M&S Gruseck GmbH NEW Screen Drums from the Market Leader – 100% MADE IN GERMANY! Screen drum suitable for a Doppstadt SM620 Square staggered perforation (QV) 80mm Sheet thickness = 10mm !!! Over 500 screen drums manufactured per year speak for themselves !!! - High-quality construction! Djdpfx Aexnyykol Sjku - Always tested! True running in operation! - Best price-performance ratio - Short delivery times! - Stamped perforations for perfect screening results! - Various perforations (square, round, honeycomb, etc.)! - Narrow bridges for optimal screening area! - Various sheet thicknesses available! - Different materials possible (min. S355)! - Special customer requirements are no problem for us – they are our specialty! - All drums are painted! - Large stock selection available! - Suitable for all common screening machines!

Condition: new, M&S Gruseck GmbH NEW screening drums from the market leader - 100% MADE IN GERMANY! Screening drum suitable for a Doppstadt SM718 Square offset perforation (RV) 80mm Sheet thickness = 10mm !!! More than 500 screening drums manufactured per year speak for themselves !!! - Premium quality! - Thoroughly tested! True running in operation! - Best price-performance ratio - Short delivery times! - Precision-punched perforations for perfect screening results! - Various perforation types (square, round, honeycomb, etc.)! - Narrow webs for optimal screening surface! Dkodpfx Alsxnyzuj Ssu - Different sheet thicknesses! - Various materials available (min. S355)! - Special customer requirements are not a problem for us, but our speciality! - All drums are painted! - Large stock selection! - For all common screening machines!

Condition: good (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 10000311P0A008025, excellent condition Dksdpfxjy Dfu Uj Al Sju

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, The Cefla iBotic lacquering machine is an advanced robotic finishing solution designed for high-precision coating applications in industrial production. Engineered for flexibility and efficiency, it uses intelligent automation to deliver consistent, high-quality lacquer finishes on a wide range of surfaces. Its programmable system allows for precise control of spray patterns, reducing material waste while ensuring uniform coverage. Ideal for manufacturers seeking to optimize productivity and finish quality, the iBotic combines cutting-edge robotics with reliable performance in modern finishing lines. Dedpfey E Huxex Al Soku

Condition: like new (used), Year of construction: 2023, functionality: fully functional, 4 Wagner TWINCONTROL 2k paint application systems, color spraying systems Dkedpfx Ajzk A H Ejl Sju 2 x low-pressure systems, used only once for testing purposes 2 x Airmix systems, little used, in new condition Each system consists of 3 piston pumps: 1 x for the base component 1 x for the hardener component 1 x for flushing with accessories On request, also available with stainless steel storage tanks with agitator, 2 x new, 2 x demonstration units Can also be purchased separately Ideal for series production and automation EX version, as it operates only with compressed air Purchase or lease takeover possible See also document in the appendix (designations) Price description: Two systems always belong together. One system for priming, one system for painting. 1. Twin Control low-pressure (AirCode), either sales price 59,000 euros or lease takeover 1,530 euros/month + 17,000 euros takeover 2. Twin Control high-pressure (Airmix), either sales price 62,000 euros or lease takeover 1,535 euros/month + 19,000 euros takeover Lease takeover subject to: Agreement from the leasing company 3. Stainless steel storage tanks (2 new) with agitator, sales price 3,200 euros 4. Stainless steel storage tanks (2 used) with agitator, sales price 2,400 euros If the complete package is taken over, the price is negotiable.

Condition: excellent (used), functionality: fully functional, ELMAG SER-FC-CS45 painting line for joinery 1. Automatic transport system with: – Trolleys: 40 units – Max. permissible total weight: 6000 kg – Trolley length: 3000 mm – Feeding system: automatic – Trolley rotation: automatic 2. Painting booth: – Dimensions: 4080 x 2000 x 4000 – Power: 4 kW – Flow rate: 14,000 m3/h 3. Flow coating system: – Length: 4000 mm – Valve height: 4500 mm – Usable working height: 2500 mm – Pump flow rate: 500 l/min – Valve construction: stainless steel Dkjdpfx Aozk Epcel Ssu – Capacity of the paint valve: 200 l 4. Drying chamber: – Dimensions: 13,000 x 2900 x 4100 5. Air purification system (inlet + recirculation filters): – Air flow: 7000 m3/h – Painting line compressor – Air purification system (inlet and recirculation filters) Air flow: 15,000 m3/h – Thermal power: 110,000 kcal/h

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 2,000 kg, Drum clamp Djdpfx Aox N U R Nol Soku ISO Class: ISO Class 3 = 2,500 – 4,999 kg Condition: Ready for use and fully functional Technical condition: Good Description: Beer keg clamp Year 2017 ISO 3A (51 cm) Capacity 2,000 kg Width 1,020 mm Forks 1,200 mm ID OS1755

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 2,000 kg, Drum clamp ISO Class: ISO Class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Beer keg clamp Year 2019 ISO 2A (41 cm) Capacity 2,000 kg Width 950 mm Forks 1,200 mm ID OS1826 Djdpfx Alox Rafuo Sjku

Condition: used, mileage: 847,500 km, power: 552 kW (750.51 HP), first registration: 12/2015, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, electric window regulation, fog lights, parking heater, power assisted steering, power mirror, spoiler, = Additional options and accessories = - Air horn - Air suspension - Alloy wheels - High Beams - Immobilizer - I shift - PTO - Radio CD player - Refridgerator - Roof Spoiler - Sleeping cabin - Speed limiter - Sper - Toolbox = Remarks = Dkodpfx Aloz Ahwto Seu Volvo FH750, December 29, 2015 847,500 km Euro 6, 6x4, I-Shift, Dynamic steering = More information = Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels GVW: 29.000 kg Extendable superstructure: Yes = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: reconditioned (used), Year of construction: 2006, year of last overhaul: 2026, ⚙️ STUDER S30-1 CE – High-precision cylindrical grinding machine | Complete retrofit We offer a STUDER S30-1 CE for high-precision external and internal cylindrical grinding operations. The machine has undergone a complete retrofit by MIRA Retrofit, including the inspection and refurbishment of its main components, as well as a careful adjustment and fine-tuning process. The result is a machine that is ready for operation, with a high level of precision, reliability, and stability, and performance comparable to that of a new machine. Key specifications: 🔹 Distance between centers: 650 mm Dkjdpfx Ajzuzyljl Sou 🔹 Height between centers: 175 mm 🔹 Grinding: external and internal 🔹 Condition: complete retrofit – ready for operation 🔧 Inspection and fine-tuning All components have been carefully inspected and adjusted to ensure high geometric accuracy and reliable, stable operation. 📸 Photographs of our finished machine. 🚚 Available for immediate delivery. For more information, technical documentation, pricing, or any questions about the machine, please do not hesitate to contact us. MIRA Retrofit SA

Condition: good (used), Year of construction: 2015, functionality: fully functional, workpiece weight (max.): 40 kg, CABO Mixspace Multispeed Paint Mixer Gyroscopic Mixer (gyromixer) Year of manufacture: 2015 Display Alphanumeric 20 x 4 Maximum bucket weight 40 kg Bucket holder tray Pull-out Dkedpfx Alovmtw Rs Ssu Bucket gripper Automatic Gyroscopic ratio 1:1.8 Speed ​​settings 3 programmable Mixing speed 80 - 180 rpm Acceleration / deceleration during the mixing cycle Automatic speed adjustment to the bucket height Mixing cycle time 20sec - 30m Maximum bucket diameter 380 mm Bucket height: min - max 90 - 490 mm Bucket height 340 (+30) mm Bucket types Round/Square/Oval Mains voltage: 230v 50Hz 3A Machine weight 190 kg machine dimensions: width:860mm length:850mm height:1150mm

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18133-00 12632868, input voltage: 400 V, Nederman ventilation unit for extraction of paint dust, oil mist, and contaminated air Dkjdpfx Alsw Hw Dge Sju

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment details are available upon request. Dkjdpfx Ajz Dmn Rsl Seu Chassis, gooseneck: Special steel frame made of high-strength fine-grained steels, electrically welded at the connection points, well-dimensioned outer frame. 4-axle arrangement. Wheel arches above the axles with spray mist suppression. All steel parts are sandblasted. Lateral impact protection made of anodized aluminum installed. Increased point load of approximately 30,000 kg over approximately 4,000 mm. Special design in the gooseneck area for maximum low-bed length in combination with AluLeg support legs instead of telescopic support winches, maximum rear swivel radius of the tractor unit approximately 2,100 mm. Special superstructure with rear beam widening: DINKEL – special superstructure. Self-supporting aluminum roof beam/profile approximately 120 x 100 mm, sliding cover with plastic flaps. Rear beams can be widened to approximately 4,200 mm (only for loading and unloading). Three sliding beams per side with rubber strap relief. Additional center beam locking mechanisms in the roof beam and parking position, using a pull cable and spring latch. DINKEL – lifting roof mechanically height-adjustable. Lifting roof height approximately 400 mm, operable on both or one side, without opening the opposite side and the doors. Additional height adjustment of approximately 480 mm in approximately 40 mm increments with height adjustment in the beams. Front overhang on the front wall for operation under a tarpaulin up to a total height of approximately 4,400 mm. Four rows of stackable approximately 150 mm aluminum slats on the sides, with 450 mm pockets at the bottom and 4 rows of single pockets above. In the upper bed, only 3 rows of insertable slats. Spacing between slats evenly distributed. Floor: Approximately 27 mm special water-resistant glued beech plywood, rough surface. Steel sheet in the wheel arch area. Forklift drivable according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve). Spring-loaded brake cylinders as parking brake. Wabco Smart Board with odometer and unit load indicator. Includes WABCO tire pressure monitoring system. Axles: 4 x 10,000 kg SAF/Sauer with drum brakes in low-bed design. Air suspension with lifting and lowering device, total lift approximately 230 mm. Third and fourth axles as friction-jointed trailing axles with electrical and mechanical lock. Twin tires: 235/75 R 17.5, -16-ply. Manufacturer of our choice, including E-wheel holder. Without E-wheel. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, at the top. Painting: Chassis and superstructure in a single color in the RAL color of your choice. Center beams, axles coated with KTL (cathodic electrodeposition) in black. Corner beams in hot-dip galvanized design. Plastic parts in black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment included: - E-supply cable 15-pin - Air suspension in ECAS design, operated on the semi-trailer - Overwidth signage at the front and rear in zinc-plated, continuously telescopic design with attached boundary lights including so

Condition: new, power: 184 kW (250.17 HP), first registration: 12/2023, fuel type: diesel, tire size: 14.00R20, axle configuration: 4x4, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 300 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: steel, total length: 8,500 mm, total width: 2,500 mm, total height: 3,350 mm, Year of construction: 2023, Equipment: air conditioning, = Additional Options and Accessories = - Leaf spring suspension - Sun visor = Notes = Model year: 2024 = Company Information = Van Vliet Automotive Trading - Your Truck Partner A wide selection of new trucks, trailers, 4x4 vehicles, and machinery. Ready for immediate use! Our in-house (design) workshops, modification center, and paint shop guarantee quick and project-specific processing of your order, anywhere in the world. ISO and AEO certified. Logistics processing and customs/export facilities. Worldwide spare parts service. International team of mechanics and trainers operating worldwide to provide technical support and training. Contact our experienced, multilingual team of customer service representatives now for professional, project-specific, and competitive advice. = Further Information = Dkjdpfxozqq Sij Al Sju General Information Model year: 2024 Technical Information Number of cylinders: 6 Engine displacement: 6,871 cc Transmission Gearbox: TipMatic 12.12 OD, automatic Axle Configuration Tire size: 14.00R20 Brakes: Drum brakes Suspension: Leaf spring suspension Weights Unladen weight: 6,528 kg Payload: 11,472 kg GVW: 18,000 kg = Company Information = WE PROVIDE, YOU ACCELERATE – Without boundaries. Van Vliet is the official MAN Truck & Bus SE importer for several African countries. Supported by comprehensive after-sales services, such as supplying parts and providing (local) training.

Condition: new, power: 353 kW (479.95 HP), first registration: 06/2022, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 8x4, wheelbase: 3,210 mm, fuel: diesel, fuel tank capacity: 400 l, brakes: retarder, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, total length: 9,200 mm, total width: 2,500 mm, total height: 3,290 mm, Year of construction: 2022, Equipment: AdBlue, retarder, = Additional Options and Accessories = - Leaf spring suspension - Sun visor - Power take-off (PTO) = Notes = Model year: 2022 Damage: None = Company Information = Van Vliet Automotive Trading - Your Truck Partner A wide selection of new trucks, trailers, 4x4 vehicles, and machinery. Ready for immediate use! Our own (design) workshops, modification center, and paint shop guarantee fast processing of your order and ensure it is suitable for your project, anywhere in the world. ISO and AEO certified. Logistics processing and customs/export facilities. Worldwide spare parts service. International team of mechanics and trainers, working on-site worldwide to provide technical support and training. Contact our experienced, multilingual team of customer service representatives now for professional, project-specific, and competitive advice. = Additional Information = General Information Model year: 2022 Technical Information Number of cylinders: 6 Engine displacement: 12,419 cc Transmission Gearbox: TipMatic 12.28 OD, automatic Axle Configuration Tire size: 315/80R22.5 Brakes: Drum brakes Suspension: Leaf spring suspension Dodpfx Aozqrcvol Sjku Weights Unladen weight: 10,700 kg Payload: 30,300 kg GVWR: 41,000 kg Condition Damage: None = Company Information = WE PROVIDE, YOU ACCELERATE. Without boundaries. Van Vliet is the official MAN Truck & Bus SE importer for several African countries. Supported by comprehensive after-sales services, such as supplying parts and providing (local) training.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Oven for powder coating, with internal dimensions of 8200x1600x3600. Gas burner with a power output of 125-390 kW. Dsdpfozylxcsx Al Seku

Condition: good (used), functionality: fully functional, power: 123 kW (167.23 HP), fuel type: diesel, color: yellow, overall weight: 17,000 kg, machine/vehicle number: JCP00107, Equipment: cabin, Product Description Used Single drum roller machinery Manufactured by Caterpillar Model CP76 Operates on Diesel Engine Engine manufacturer Caterpillar Weight 17000 KG Dkjdpfeum Ef Njx Al Sju Displacement 6.6 L Maximum torque 2200 rpm Power 123 KW Travel speed 11 Km/h Machine sold as its condition More information Please contact VIJAY JPN Industrial Trading Pte Ltd 13A Pandan crescent, Singapore 128478

Condition: used, !!! Attention: Only the conveyor system is being offered here !!! Offered here is a floor conveyor system for a wheel rim painting line. The system consists of the following components: - Conveyor chain Dkodpfxjy Ui Awo Al Sou - Conveyor rails (curved and straight sections) - Trolleys with mounts for automotive rims - Rotating rail: on this track, the rim rotates during the painting process to ensure an even application of paint - Conveyor motors (without control unit) Total length: approx. 150 m Maximum part diameter: 550 mm Maximum part height: 400 mm The system is suitable for both wet paint and powder coating applications. No control system is included in the scope of delivery. The system has been dismantled and packed in crates. Inspection is possible by appointment. The system must be serviced before commissioning. Two additional systems are available as well. These versions are suitable for curing processes in an oven.

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: A1407003, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: cabin, For Sale: Complete Venjakob Surface Finishing Line We offer a complete Venjakob automated surface finishing line designed for high-efficiency coating, sanding, and drying of flat workpieces. This line is ideal for industrial applications requiring consistent and high-quality surface treatment (e.g. furniture, doors, panels). The Venjakob line consists of: VEN TRANS BELT modules: 0100 / 0300 / 0500 / 0600 / 0800 / 1000 / 1200 / 1300 / 1350 VEN SAND BRUSH modules: 0200 / 0900 VEN SPRAY COMFORT modules: 0400 / 1100 Dedpfx Asxm Twtel Seku VEN DRY AIR JET modules: 0700 / 1400 Technical data provided in the documentation.

Condition: excellent (used), Professional milling machine / shot blaster for floor preparation from the renowned Swiss manufacturer Blastrac / Früh. This machine is designed for milling, removal of coatings, adhesives, paint, epoxy resins, and for preparing concrete surfaces prior to further processing. The device is in good technical and visual condition. It features a robust industrial-grade build, equipped with a powerful ABB motor and a milling drum. It is ideal for both renovation and industrial tasks. Technical Data: • Manufacturer: Früh / Blastrac • Model: RT-2000 EL • Machine type: concrete scarifier / milling machine • Power supply: 230 V • Frequency: 50 Hz • Machine power: 1.85 kW • Motor: ABB Motors • Motor speed: 2800 rpm • Working capacitor: 50 µF / 400 V • Protection rating: IP55 • Machine number: 4122 000007 Applications: • Removal of coatings and paint • Concrete milling • Floor preparation • Removal of adhesives and resins • Renovation of industrial surfaces Condition: used, fully complete. Dksdpfx Alsy R Ergj Sju The machine shows normal signs of wear consistent with use.

Condition: used, power: 115 kW (156.36 HP), Year of construction: 2021, operating hours: 3,540 h, Year of manufacture: 2021 Empty weight: 16.000 kg Dimensions (LxBxH): 595 x 231 x 296 cm Djdpfxjxb Aymj Al Ssku Engine type: Deutz DEUTZ TCD 4.1 L4 156CV Roller width: 2140 mm

Condition: used, Year of construction: 2020, operating hours: 3,120 h, Empty weight: 16.000 kg Dimensions (LxBxH): 622 x 230 x 299 cm Engine type: Deutz DEUTZ TCD4.1 L-4 Roller width: 2130 mm = Additional options and accessories = Dkedpsygu Rvsfx Al Ssu - Seat heater