Used Paint Sprayer for sale (4,572)

Condition: excellent (used), Year of construction: 2000, WIWA high-pressure pump 235.42R / 38042, year 2000 With high delivery capacity, ideal as a feed pump for airless sprayers (suitable for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Transmission ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Delivery rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm Gsdpfx Aethcflsfwstt The devices are very little used! Technically and visually in very good condition. ATTENTION: the price of EUR 1.900,- (net) is for 1 device !!!

Year of construction: 2020, condition: new, ROMER manipulators are characterized by quiet operation. Bmt7r28v0e They can be widely used both with simple, as well as complex multidimensional processes They are programmed using a PLC controller Working with long and short strokes The toothed belt transmission ensures quiet operation Maintenance-free AC motor Narrow column design for space saving. Gjdpfx Aef Aad Nofwjtt The robust construction of the manipulators ensures great possibilities and high stability. The manipulator is equipped with a 7 "touch panel or is externally controlled via the ModBus protocol with RJ45 cables

Condition: new, Year of construction: 2020, operating hours: 1 h, functionality: fully functional, machine/vehicle number: PUBMANUAL000168, Equipment: documentation/manual, Die SWISS KRONO Kft. bietet die die Giardinagroup automatische Spritzlackieranlage und die dazugehörigen Trockenkammer zum Verkauf an. Als Anlage fügen wir Ihnen die Beschreibung über die Maschinen, sowie weitere Bilder und Informationen in einer geteilten Mappe bei. Gtsdpfxorxubps Afwot SWISS KRONO Kft. offers Giardinagroup automatic spray painting system and the associated drying chamber for sale. As an attachment we are attaching the description of the machines as well as further pictures and information in a shared folder.

Condition: new, Year of construction: 2025, BITUMEN EMULSION SPRAYER ABS-8000 Bitumen Emulsion Sprayer ABS 8000 – is the optimal equipment for performing large volumes of work in the shortest possible time. Autonomous diesel engine makes it possible to install the equipment on any truck. Theelements of control are located on a separate panel in the driver’s cab with partial redundancy in the control cabinet, which facilitates the adjustment of equipment and the transition of its working bodies from the transport to the working position. High quality bitumen pump and shut-off valves ensure trouble-free operation of the equipment. SPECIFICATIONS Density of surface coating – from 100 g / m2 to 1600 g / m2 Gtjdpfx Aovpt Dcefwot Spraying width – from 2 m to 3.7 m Cleaning system. Tank capacity 8000 l. Function of tank self-pumping. Spraying barblowing by compressor. Rear view camera with monitor in driver’s cab. Bitumen emulsion spraying dosing control (g/m2) via touch screen display in driver’s cab. The system for heating the bitumen emulsion with a diesel burner (Italy). Spraying rod control equipment (lowering and expanding) by means of a remote control in the driver’s cab and on the vehicle body. REQUEST A CALL Buy BITUMEN EMULSION SPRAYERS TM TICAB – the best decision for you! Our price is competitive today and tomorrow. Specifications: Density of surface coating – from 100 g/m2 to 1600 g/m2; Spraying width – from 2 m to 3.7 m; Cleaning system; Tank capacity 8000 l; Function of tank self-pumping; Spraying bar blowing by compressor; Rear view camera with monitor in driver's cab; Bitumen emulsion spraying dosing control (g/m2) via touch screen display in driver's cab; The system for heating the bitumen emulsion with a diesel burner (Italy); Spraying rod control equipment (lowering and expanding) using a remote control inside the driver's cab and on the sprayer body.

Condition: used, Year of construction: 2016, Used Makor START ONE spray coating machine suitable for low-volume woodworking production. Designed for applying water-based or solvent-based paints and glues to veneered components and PVC panels. Ideal for companies moving from manual finishing to automatic spray coating. Equipped with PLC control system with intuitive interface and automatic panel detection to optimise paint usage. Features a self-cleaning paper transport system, reducing maintenance and downtime. Spraying unit includes an electronically controlled oscillating arm with capacity for up to 4 spray guns, 2 high-pressure feed circuits, and quick-change coupling system. Gjdpfx Aex Iggyefwjtt Efficient air-flow and filtration system ensures clean operation and environmental compliance. Technical Data: • Feed speed: 1–4.5 m/min • Air capacity: 10,000 m³/h • Installed power: 7 kW • Working height: approx. 900 mm

Condition: used, Serial number: 24-0xxxx Please contact ATS Norway for more information Gjdjxypqcopfx Afwstt Please provide reference number upon request: 21860 Description: We have a Pitsan ER80 paint filter for sale. This is used for larger painting/varnishing projects to provide better ventilation. Ready for delivery Own weight: 1 Model: ER80 malefilter

Condition: used, mileage: 606,000 km, power: 353 kW (479.95 HP), first registration: 02/2009, fuel type: diesel, axle configuration: 6x4, fuel: diesel, brakes: retarder, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, Year of construction: 2009, Equipment: ABS, electric window regulation, power assisted steering, retarder, = Additional options and accessories = - Immobilizer - SAF Axis - Speed limiter - Sper = Remarks = MAN TGS 26.480, 2009, 605000 km, 6x4, Leaf-feathered, Manual, Retarder, R. Kolberg bitumen construction, Hatz diesel engine, R. Kolberg trailer, 1997, SAF axles, Leaf-feathered, HATZ diesel engine Gsdjw Ahpfepfx Afwstt = More information = Suspension: leaf suspension Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels Make of bodywork: R. Kolberg Gmbh = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: good (used), Paint casting machine, paint casting station -Paint casting machine Manufacturer: Bürkle -Max. pouring width: 1290 mm -Adjustable pouring gap: via handwheel with indicator -hydraulically: height adjustable -without: paint pump Gtsdjc R Iyaopfx Afwjt -Dimensions: 2100/800/H1450 mm -Weight: 386 kg

Condition: new, - Mobile design - high degree of separation, high extraction performance - easy to handle - long filter service life, therefore little downtime - more flexible thanks to extraction technology with front plate system - certified for ATEX Zone 2 Gsdpfx Aju T Hrpjfwstt ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Weight: 175 kg + 5 m cable with plug and throttle valve

Condition: excellent (used), We are offering this very good professional spray booth Carmat, model GMD 110-V, equipped with heating up to 60 degrees and sprinkler extinguishing system, etc. If you have any questions or require more information, feel free to send us a message or call us. The machine is located in Brussels. Gedpfxex Ryxze Afwjtt

Condition: excellent (used), mileage: 695,728 km, power: 221 kW (300.48 HP), first registration: 04/2004, fuel type: diesel, axle configuration: 6x2, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, total length: 9,400 mm, total width: 2,500 mm, total height: 3,090 mm, Year of construction: 2004, = Additional options and accessories = - Power Take-Off (PTO) = Further information = General Information Usable material: Bitumen Technical Information Number of cylinders: 6 Axle configuration Front axle: Steering; Suspension: Leaf spring Rear axle 1: Twin tires; Suspension: Air suspension Rear axle 2: Lift axle; Steering; Suspension: Air suspension Weights Unladen weight: 19,230 kg Payload: 6,770 kg Gross vehicle weight: 26,000 kg Functional Body manufacturer: BURTEC Number of chambers: 1 Pump: Yes Water installation: Yes Hoses: Yes Condition Technical condition: Very good Optical condition: Very good Additional information Gtsdpfxow Ncfas Afwet Please contact Thierry Leemans for further information.

Condition: good (used), functionality: fully functional, Paint mist extraction system/suspension rail Gtedjx T Amyepfx Afwot - incl. suspension rail, dimensions: approx. 10000 x 7000 mm - incl. various hanging brackets, paint trolleys, and a paint mist extraction unit - extraction unit dimensions: 3000 x 1000 mm Note: The item must be picked up bindingly between 18 and 26 February 2026 on a date to be agreed. FCA D-78087 Mönchweiler – loaded onto truck

Condition: new, The comfortable Varioflex rack trolley is designed for the flexible and gentle storage of painted workpieces. Additionally, its 4 swivel castors allow for easy transportation of the workpieces. Its robust tubular frame construction can be adjusted from 200 to 2000 mm. With 17 inner and outer support tubes per side, the trolley can carry loads up to 400 kg when evenly distributed. The removable inner and outer support tubes can be taken out if required and reinserted at the back. When not in use, the rack trolley can be compactly folded for space-saving storage. Gtjdpfx Afjw I Ux Nowjt Optional accessories: - Plastic-coated support tubes - Additional rack Technical Data: Length: 200 - 2000 mm Depth: 870 - 1180 mm Height: 1855 mm Support tube length: 650 mm (extendable to 1150 mm) Clear distance between the tubes: 70 mm Capacity: 400 kg The image shows optional accessories (additional rack).

Condition: good (used), Airless sprayer, painting device, spray pack, paint sprayer, paint spray system, paint pump, electrostatic sprayer, airless complete system, pneumatic piston pumps, airless high-pressure pump, air motor, AIR MOTOR -Manufacturer: Wagner, Airless sprayer type: 33-70 with transport trolley and spray gun -Material flow: max. 12.6 l/min -Air inlet pressure: max. 8 bar, operating pressure max. 264 bar -Individual components: see photos -Dimensions: 830/680/H1140 mm Gjdjw U T Atepfx Afwjtt -Weight: 50 kg

Condition: as good as new (ex-display), Year of construction: 2026, The captivating advantages: Space-saving compact design - comfortable and powerful. Excellent surface quality and pleasant working climate due to diagonal low-turbulence air flow. Large airflow window due to air baffles - therefore also suitable for larger workpieces. Separation efficiency of paint mist up to 99%, retention capacity of the pre-filter up to 18 kg/m² - therefore long filter life! Easy and quick filter change on the front side. Inexpensive replacement filters. Low purchase costs and extremely low energy consumption. Dry splashboard made of galvanized sheet steel with welded base frame, cardboard labyrinth filter as pre-filter and glass fibre filter as after-filter unit. Ex-fan incl. throttle valve mounted on the left. Do not compromise on the quality of the surface. Easy Paint extraction walls are the ideal cost-effective solution for effective collection and filtering of paint mist and extraction of solvent vapours. Robust and powerful but economical in consumption. The IPE double filtration system provides two filter stages for a maximum separation efficiency of up to 99 %. The cardboard labyrinth filter initially absorbs considerably more overspray (up to 18 kg/m² filter surface) than conventional filter mats due to the folded filter pockets. The downstream glass fibre secondary filter absorbs only the finest residual particles. Gtjdpfscnz Iqsx Afwjt As a guide value, the cardboard labyrinth filter, depending on

Condition: new, CATALOG NUMBER MR001 - brand new machine, DTR documentation + CE TECHNICAL DATA - working width: 2000 mm - front width: 2500 mm - depth: 850 mm - height: 1700/1950 mm - max. capacity: 7000 m3/h - fan power: 1.5 kW - speed: 2850 rpm Gtsdjx Uz Rmepfx Afwjt - electrical parameters: 400V-50Hz - outlet duct diameter – square 540x540 mm - pre-filter: cardboard - "Paint-stop" filters - noise level approx. 78 dB - dimensions L/W/H 2500x850x2200 mm - weight approx. 250 kg Net price: 14,100 PLN Net price: 3,350 EUR at an exchange rate of 4.20 PLN/EUR (Prices may change with significant fluctuations)

Condition: excellent (used), mileage: 168,247 km, first registration: 11/1979, fuel type: diesel, axle configuration: 4x4, fuel: diesel, color: green, driver cabin: day cab, gearing type: mechanical, suspension: steel, total length: 5,700 mm, total width: 2,230 mm, total height: 2,860 mm, Year of construction: 1979, = Additional options and accessories = Gedpfx Afowizq Ajwott - PTO (Power Take-Off) = Further information = Suitable material: Bitumen Suspension: Leaf suspension Front axle: Steered Number of cylinders: 6 Number of chambers: 1 Pump: Yes Technical condition: Very good Visual appearance: Very good Please contact Thierry Leemans for further information.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Gedpfxexa H Ewo Afwett Do you have any questions or suggestions? We are happy to assist you.

Condition: good (used), Paint module Gun Driver Module -Type: Spraymation 305910-2 -50 VDC Price: per piece Quantity: 2 available Gtsdpeb A Rk Tofx Afwjt -Weight: 0.8 kg

Condition: as good as new (ex-display), Year of construction: 2026, The impressive advantages: Space-saving compact design - comfortable and powerful. Excellent surface quality and a pleasant working environment due to diagonallow-turbulence air-stroemung. Large detection window thanks to air guide plates – thus also suitable for larger factory troughs. Separation degree of paint mist up to 99%, return ability of the pre-filter up to 18 kg/m2 - thus great filter life! Easy and fast filter change on the front. Cost-cost replacement filters. Low acquisition costs and low energy requirements. Gjdpodqc U Hjfx Afwjtt Dry spray wall made of galvanized sheet steel with welded base frame, cardboard labyrinth filter as pre-filter and glass fiber filter as post-filter unit. Ex-fan incl. throttle valve attached to the left. Do not compromise on the quality of the surface. Suction-weighing Easy Paint are the ideal cost-effective application for the effective detection and filtering of the paint mist as well as the suction of the solvent dimempfe. Robust and powerful but economical in consumption. Thanks to the IPE double filtration system, two filter levels ensure a maximum separation degree of up to 99%. Thanks to the folded filter pockets, the cardboard labyrinth filter absorbs considerably more overspray (up to 18 kg/m2 filter area) than conventional filter mats. The downstream fiber glass fiber second-based filter absorbs only the finest residual particles. As a guideline, the cardboard labyrinth

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. Godpfx Afswzmcbjwett FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Year of construction: 2026, Type and specifications The distinctive advantages: Space-saving compact design - comfortable and powerful. Excellent surface quality and pleasant working environment by diagonal low-turbulence airflow. Large capture window by air deflectors - suitable even for large workpieces. Separation of paint mist up to 99%, rear retaining capacity of the filter up to 18 kg / m ² - big filter booth time! Quick and easy filter change on the front page. Low-cost replacement filters. Low cost and extremely low energy consumption. Dry spraying wall of galvanized steel with welded base frame, cardboard labyrinth as a preliminary filter and glass fibre filter as a post filter unit. Grown ex fan incl. throttle links. Make no compromises in the quality of the surface. Suction walls easy paint are the ideal low-cost solution for the effective detection and filtering of paint mist, as well as extraction solvent vapours. Robust and powerful but economical in use. Standard suction power of easy paint 3500 model 600025 air performance on standard delivery * 3500 m ³/h filter surface primary 2,5 m² filtration area secondary 2.0 m ² power motor 400V/50 Hz * ex 1,1 kW Gtedpfjb R D U Sjx Afwet Connection pipe suction pipe D 300 mm width in mm = 2750 overall height 1455 mm Depth in mm with capture window 855 weight in kg 145 Stando

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: Gtodpfxowzl Hxo Afwst After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: ready for operation (used), Year of construction: 2017, Gebr. Wagner Puma 28-40 Airless Year of manufacture: 2017 Wagner 28-40, air-operated piston pump with AirCoat equipment – used This unit is pre-owned Technical details Gsdpfxex N E Tze Afwstt Pressure ratio: 28:1 Max. air inlet pressure: 8 bar Max. output: 2.4 l/min Max. pressure: 224 bar Max. nozzle size: 0.023" Scope of delivery Wagner Puma 28-40 AC with wall bracket on pallet truck 7.5m material hose DN4, 250 bar Wagner spray gun Nozzle The unit is suitable, among other applications, for processing the following materials: Clear coats Paints Glazes Stains Fillers Acrylic paint

Condition: ready for operation (used), Year of construction: 2016, Gebr. Wagner Piston Pump Leopard 35-70 - Spraypack Airless -+ Year of manufacture: 2016 Technical data: Transmission ratio: 35:1 Max. air inlet pressure: 7.1 bar Max. working pressure: 250 bar Displacement per double stroke: 70 cm³ Max. stroke rate: 60 DH/min Max. delivery rate: 4.2 l/min Air consumption at 6 bar per double stroke: 18.6 nl Gtjdpfxox N E Sqj Afwst - immediately available -