Used Panhans 250 for sale (96)

Condition: good (used), Year of construction: 1980, Table dimensions 1.100 x 760 mm Motor output 4,7 kW Spindle diameter 30 mm reus 3.000/4.500/6.000/9.000 U/min Njdpfx Ajxzuwwonfowf

Condition: used, Year of construction: 1979, Spindle tiltable: No Height adjustment: Handwheel Cutter jaw adjustment: Manual Height indicator: Scale Fence indicator: Scale Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 9000, speed display defective Motor power: 5 / 6 kW Motor brake: Yes, manual Extraction connection: 120 mm Machine length: 2500 mm Machine depth: 900 mm Njdsyffx Uopfx Anfewf Weight: 800 kg

Year of construction: 1990, condition: used, functionality: fully functional, The machine is in good condition. The milling head is not included. The Wegoma feed unit with standard stand is also included. Nwsdeyfxa Eopfx Anfof

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, cutting height (max.): 155 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, rotational speed (max.): 6,000 rpm, section length (max.): 3,450 mm, TECHNICAL DETAILS Maximum cutting height: 155 mm Maximum cutting height at 45°: 105 mm Nedpfsyx Et Hjx Anfewf Maximum cutting width: 1,250 mm Maximum cutting length: 3,450 mm Maximum saw blade diameter: 450 mm Bore diameter: 30 mm Saw blade tilt range: 0 - 46° Speeds: 3,000 / 4,000 / 5,000 / 6,000 rpm Sliding table length: 3,200 mm Scorer: Auto-EPS with motorized positioning for lateral and height adjustment Cross carriage: Standard, with 3 digital flip stops, extendable up to 3,500 mm Rip fence: Motorized control, with positioning control to 0.1 mm MACHINE DETAILS Motor power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 3,700 x 2,300 x 1,700 mm Machine weight: 1,250 kg EQUIPMENT Electrical axis control Sliding table completely readjusted Ruler carrier replaced with new system, featuring 3 flip stops Stainless steel scale for angle adjustment renewed Cross carriage checked Longitudinal fence with 90° locking completely replaced Machine electrically inspected Machine completely readjusted, checked, and lubricated Note: The specified data are partially taken from manufacturer's brochures or documents and may differ from the actual values.

Condition: excellent (used), Bandsaw PANHANS BSB630 -used- Swivelling table, APA blade guide top and bottom, Cutting height adjustment via handwheel, Operating pressure gauge ----- Technical Data ----- Wheel diameter: 630 mm, Max. cutting height: 320 mm, Max. cutting width: 600 mm, Table size: 680x780 mm, Table tilt: 20°, Blade length: 4,480 mm, Motor: 2.2 kW, Extraction ports: 2x100 mm, Dimensions: L=1,200 W=800 H=2,150 mm Nwjdeymn E Hopfx Anfef Quality Info: - Blade tracking / imbalance checked - Band tires renewed - Guides checked - Wheels newly mounted - New belts - Complete basic cleaning - Electrics checked - Immediately ready for operation

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Planing width: 630 mm Planing height: 3 - 300 mm Maximum cutting depth: 8 mm Table length: 1100 mm Cutterhead speed: 5000 rpm Feed motor power: 0.55 / 0.75 kW / 0.8 / 1.0 HP Extraction port Ø 160 mm, usable on left and right Feed speed: 7 + 14 m/min Main motor power: 7.5 kW / 10 HP Voltage: 400 V / 50 Hz Nwodpey Eizuofx Anfjf Space requirement approx. 1070 x 1200 x 1060 mm Net weight approx. 1050 kg TECHNICAL DESCRIPTION Robust German engineering. For thickness planing with a planing width up to 630 mm and planing height from 3 to 300 mm, compact and ergonomic machine dimensions. PANHANS solid steel cutterhead Ø 125 mm with 4 Tersa reversible knives. Pendulum-mounted feed rollers. Segmented rubber infeed and outfeed rollers with Ø 90 mm ensure smooth and secure workpiece feed. With segmented pressure bar. Electric height adjustment of the thicknessing table, tilt-resistant on 4 trapezoidal thread spindles. With finely planed thickness table. Positioning control 4.3" touchscreen. Automatic star-delta start. Mechanical motor brake. Extraction port 160 mm, usable on left and right. Machine calibrated at the factory. CE compliant GS tested Standard equipment as follows: Solid steel cutterhead with 4 Tersa reversible knives Standard quality for 630 mm planing width Rubber infeed roller Rubber outfeed roller Thickness table without table glide rollers Positioning control 4.3" touchscreen 2 feed speeds 7 + 14 m/min Touch panel 4.3" Location: Flörsheim Availability: Immediately

Condition: used, Year of construction: 1971, Cutterhead Z = 2, planer knives, planing width 520 mm, fixed fence. Location: Nattheim Nwedpfxjv I Eatj Anfjf

Condition: used, Year of construction: 1991, Table size: 1100 x 760 mm Table height: 870 mm Cutter spindle mount: MK 5 Speeds: 3000/4500/6000/9000 rpm Height adjustment: 120 mm Table opening swivel plate diameter: 450 mm Swivel range: -5° to +45° Weight: approx. 850 kg Storage location: Supplier Nwsdpfjx It Ansx Anfsf

Condition: ready for operation (used), Year of construction: 1987, machine/vehicle number: 402, functionality: fully functional, cutting height (max.): 70 mm, cutting width (max.): 3,200 mm, saw blade diameter: 300 mm, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 70 mm, Equipment: scorer, Cutting length: 3200 mm Cutting width: 3200 mm Width stop: Gear motor adjustment Main saw unit: saw blade Ø 300, Ø 30, Z=60, SH 70 Nedpfx Anovi H Diofswf Scoring unit: yes - saw blade Ø 125, Ø 20, Z=24 Softforming unit: no Side pressure unit: yes - Version: FR 50/100 Residual cutting device: yes - Pressure beam recess Veneer cutting device: yes Trimming device: yes - Spacing: 145/525/1790 Support table front: 400 x 1400 mm - 2 pieces Rear support table: 240 x 2960 mm - 1 piece Support bars rear: 40 x 2960 mm - 5 pieces Angled table: 480 x 1400 mm left Angle ruler: with pull-out Collets: 4 pieces - floating - distance 70/400/1600/2800 Stop jaw: 2 pieces - rigid - distance 1000/2200 additional foot at the rear : no - 3 feet safety guard: yes foot switch : no Machine cuts from: left to right unit can emerge in any area: no automatic lowering with saw overtravel: no 3-step cutting height adjustment: no Main circular saw: 7.5 kW, 380 V, 2870 rpm, 50 Hz Scoring saw: 1.1 kW, 380 V, 2800 rpm, 50 Hz Width stop adjustment motor with torque compensation: fine input motor: 0.12 kW, 380 V, 1380 /min, main motor: 0.35 kW, 380 V, 1350n.

Condition: used, Motor output 5,9 kW Spindle diameter 30 mm reus 3000 / 4500 / 6000 / 9000 U/min Panhans Type 259 swivel spindle milling machine or table milling machine for precise milling, profiling, and rebating of solid wood and wood-based materials. The machine has a swiveling milling spindle, enabling versatile machining at different angles. Ideal for carpentry, furniture making, and interior design. Includes Haffner feed device. Nedpfsyrhv Nox Anfewf

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, planing width: 630 mm, number of planer blades: 4, Equipment: motor brake, Panhans Thickness Planer 436 DH 400 – 630 mm – Tersa – 7.5 kW – Excellent Condition For sale: Panhans thickness planer type 436 DH 400 in excellent condition. Robust, precise machine with electric height adjustment, digital display, and Tersa quick-change system. Technical data: Planing width: 630 mm Planing height: 250 mm Nsdpfx Anew U Thiofjwf Motor: 7.5 kW Feed speed: 7 + 14 m/min Table length: 1,110 mm Weight: approx. 700 kg Price: €8,900 net (plus VAT) Shipping by freight company possible Available ex stock Haldensleben

Condition: good (used), functionality: fully functional, power: 5.5 kW (7.48 HP), planing width: 510 mm, number of blades: 4, overall weight: 1,000 kg, Equipment: documentation/manual, For sale is a high-quality combined surface planer and thicknesser Panhans 445/A in very well-maintained condition. The machine is being sold on behalf of a customer (private sale) and comes from the workshop of a hobby woodworker who is switching to separate machines (planer and thicknesser). Technical specifications: + Manufacturer: Panhans + Model: 445/A + Motor power: 5.5 kW with motor brake + Connection: 400 V (three-phase) + Planing width: 510 mm + Planer table length: approx. 2200–2250 mm + Thicknessing height: approx. 200 mm + Feed speed: 2-stage (approx. 7 / 14 m/min) + Cutter block: 4-knife cutter block + Extraction port: approx. 160 mm Nodpfxjy Efb Ro Anfewf + Weight: approx. 1000 kg Features & highlights: + Suvamatic cutter block guard (high safety standard) + Aigner auxiliary fence + Various manuals/documentation + Multiple sets of planer knives included + Panhans setting gauge + Heavy-duty industrial quality – durable and precise + Large, precision-ground planer table + Tilting planer fence (up to approx. 45°) + Convenient switch between surface planing and thicknessing + Smooth operation and powerful motor Condition: Technically flawless Ready for immediate use Well-maintained with only hobby use Minor, normal signs of wear Important information: Sold on behalf of customer (private sale) No warranty or returns Inspection and test run possible by arrangement Collection only (forklift for loading available)

Condition: used, Year of construction: 2002, Carriage length: 3200 mm Cutting width at rip fence: 1300 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 150 mm Scoring unit: yes Saw blade swivel range: +45° Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: electric Saw blade angle display: digital readout Cutting height display: digital readout Rip fence display: digital readout Crosscut scale display: scale Scoring unit adjustment: electric Saw blade diameter: 450 mm Speeds: 4 Nwjdpfx Asyq R Aconfjf Motor power: 5.5 kW Extraction port: 80 and 120 mm Machine length: 3500 mm Machine width: 2300 mm Weight: 1200 kg

Year of construction: 2000, condition: used, Milling stop adjustment: via handwheel Nodpfxoy A Hi Rs Anfswf Milling stop measurement display: Siko counter Milling jaws adjustment: handwheel Milling jaws measurement display: Siko counter

Condition: used, Year of construction: 1996, max. blade length: 4720 mm, motor power: 2.2 kW, roller diameter: 600 mm, max. cutting height: 395 mm, max. cutting width: 585 mm, tiltable table: yes, column side: left, fence: usable on both sides, blade guide position: top and bottom, blade guide: roller guide, design: stationary, weight approx.: 300 kg, dimensions: 1115 x 670 x 2115 mm. Storage location: supplier. Njdpfx Anjyg Hzgefewf

Condition: good (used), Year of construction: 1991, Working width 510 mm Working height 200 mm Nwjdpfxeyx Iq Ie Anfef Motor output 5,5 kW Length of the planing table 2250 mm Number of knives 4 St. Feed speed 7 / 14 m/min. Dust suction hood 160 mm machine weight ab. 1000 kg

Condition: used, Year of construction: 1987, Sawblade tiltable 45 ° Length of the rolling table 3200 mm cutting width 1000 mm Motor output 5,5 kW Nwsdpevyuqrefx Anfef weight of the machine ca. 1000 kg

Condition: new, Year of construction: 2025, machine/vehicle number: C890, PANHANS band saw Type BSB 600 Stand in modern steel construction, table top thick-walled, high ribbed cast iron massive grey cast iron band saw frames technology: - upper and lower PANHANS band saw blade guide APA II - finely planed cast iron table - swivelling table top up to 20 - dynamically balanced band saw blades with vulcanized rubber bandages - fence ruler can be used to the left of the saw blade - Fence profile can be folded down - blade tension indicator - mechanical height adjustment by hand wheel with locking pinion - automatic motor brake with main switch and motor protection switch technical data: - max. cutting height 380 mm - max. cutting width 570 mm - table size (BT) 590 x 810 mm - table height 905 mm Nedpfxjbzmb Hs Anfswf - wheel-Ø 600 mm - engine power 2,2 kW - wheel speed 820 rpm - max. saw band length 4710 mm - suction nozzle-Ø 2 x 100 mm - machine weight 272 kg - machine size (LBH) 1120 x 750 x 2125 mm Location: ex stock Bitburg Top exhibition price Freely loaded

Condition: new, Year of construction: 2024, Panhans swivel milling machine type: 245/20 Solid German engineering Table milling machine with one-sided swiveling fixed milling spindle for the swivel range from -5° to +45.5° Positioning control for height and swivel adjustment with height zeroing and offset measurement travel Electronic position and speed displays 4 speeds 3000 / 4500 / 6000 / 9000 rpm Quick belt tensioning device Push button for spindle start and stop Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Lower control panel on rigid frame support Milling fence 216 total adjustment via handwheel and LCD display incl. cast fence plates and aluminum splitter tongues Machine socket Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE-compliant Nwjdpfx Ajr Ig H Tenfef GS tested Table size 1100 x 760 mm Table height 870 mm Milling spindle not exchangeable 30 mm Clamping height 140 mm Height adjustment 125 mm Suction nozzle 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 800 kg Equipment: Top control panel Swivel +-45 degrees Motor 7.5 Kw Centerx Extendable frame support Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Panhans BSB 800 band sawing machine TECHNICAL DESCRIPTION Solid German machine construction Machine stand in shapely modern design torsion-free double-chamber welded steel construction Upper and lower door secured by limit switches Upper and lower precision band saw blade guide APA 2, size 2 Finely planed gray cast iron table Swivel table top up to 45 Dyn. balanced band saw wheels with vulcanized rubber bandages Stop ruler can be used to the left of the saw blade, Fence profile can be reversed Blade tension indicator 1 piece saw blade5775 x 30 x 0.8 mm, tooth width9 mm, No. 3780.301 Mechanical height adjustment of the saw blade guard by hand wheel with locking pinion Rotary cam switch with star-delta start and emergency stop button Mechanical motor brake with main switch and motor protection relay CE-compliant GS tested Left-hand machine stand Rotary cam switch with star-delta start and emergency stop switch Wheel diameter 800 mm Belt speed 1800 m/min Njdpfsr Igzcox Anfowf Cutting height 520 mm Cutting width 780 mm Blade length max. 5775 mm Saw blade width min. /max. 15 mm /4 0m m Optional with special coating Saw blade width min. max. 10 mm / 35 mm Table size 1145 x 760 mm Table height 930m m Suction nozzle 2 x 0 120 mm, Motor power 4 kW / 5.5P S Voltage 400 V / 50 Hz Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 525 kg Location: From stock 54634 Bitburg - immediately available -

Condition: ready for operation (used), Year of construction: 2013, operating hours: 3,675 h, overall weight: 880 kg, spindle motor power: 5,500 W, spindle speed (max.): 9,000 rpm, Spindle moulder manufactured in 2013. This PANHANS 245 features a robust table size of 1100 × 760 mm and a spindle height adjustment of 125 mm. It operates at spindle speeds of 3000, 4500, 6000, and 9000 rpm, making it suitable for various woodworking applications. If you are looking to get high-quality woodworking capabilities, consider the PANHANS 245 spindle moulder we have for sale. Contact us for further details. • Voltage: 400 V • Frequency: 50 Hz • Phases: 3 • Current type: AC • Motor power: 5.5 kW • Spindle speeds: 3000 / 4500 / 6000 / 9000 rpm • Table size: 1100 × 760 mm • Table height: 880 mm • Spindle height adjustment: 125 mm • Spindle diameter: 30 mm • Tilting range: −5° to +45.5° • Extraction connection: 2 × 120 mm • Required space: approx. 5000 × 2800 mm • Noise level (idle): 67.4 dB(A) Nsdpfx Aoywk U Tsnfewf • Noise level (working): 82.4 dB(A) • Sound power level (idle): 83.0 dB(A) • Sound power level (working): 91.2 dB(A) • Operating hours: 3,675 h

Condition: used, Year of construction: 2009, Cutting length: 4200 mm Cutting width: 3200 mm Max. saw blade protrusion: with blade vertical at 0° = 70 mm with blade tilted at 45° = 50 mm Feed speed forward: 0-80 m/min. Feed speed reverse: 100 m/min. Weight: approx. 5400 kg. Motor power: 14 kW Scoring saw: 1.5 kW Tool: diameter: 350 mm bore: 30 mm Extraction port (bottom): 140 mm Extraction port (pressure beam): 100 mm Storage location: Supplier Nwodsyf Nu Tspfx Anfjf

Condition: ready for operation (used), Year of construction: 2013, CNC Panel Saw for wood and wood-based materials manufactured in 2013. This PANHANS S45 Speed features a maximum cutting length of approximately 4,200 mm and a cutting width of around 3,200 mm. It includes an automatic tilting saw blade for precise angular cuts and a modern CNC/PC control system. If you are looking to get high-quality cutting capabilities, consider the PANHANS S45 Speed machine we have for sale. Contact us for further details. • Condition: Excellent – fully functional, very well maintained, low usage, ready for immediate operationTechnical specifications • Max cutting length: approx. 4,200 mm (depending on configuration) • Max cutting width: approx. 3,200 mm Nwsdpfxoyvqz Dj Anfjf • Saw blade tilting range: 0° to approx. 45° • Max cutting height at 0°: approx. 72 mm • Main saw motor power: approx. 14 kW • Scoring blade diameter: approx. 180 mm • Saw carriage feed speed: up to 100 m/min (forward/backward, Speed version) • Control system: CNC/PC controlEquipment and features • Automatic tilting saw blade for angular cuts • Optimized cutting cycles (single, multiple, batch) • Program-controlled pusher for accurate positioning • Integrated scoring unit for clean cuts • Air tables (3x) for easy handling of large panels • Format and angular cutting system Additional equipment • Saw blades • Scoring blades • Optional optimization software

Condition: used, Year of construction: 2002, Used machine Year of manufacture: 2002 Cutting area: 4200 x 4200 mm Maximum cutting height: 80 mm Saw blade protrusion: 92 mm Main saw motor: 11 kW Scoring saw motor: 2.2 kW Total electrical connected load: 19.5 kW, 41 amperes Njdpjyt Tkuefx Anfowf Required air pressure: 8 bar Extraction: 4000 m³/h Saw feed speed, stepless: 0 - 70 m/min Rip fence speed: 0 - 80 m/min (max. output: 25 m/min) Main saw blade: 350 x 4.4 x 30 Z 72 TF Scoring saw blade: 180 x 4.4/5.4 x 30 Z 28 VR conical Net weight approx. 6000 kg Availability: by arrangement Storage location: Rhineland-Palatinate

Condition: new, Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), planing width: 410 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 5,000 rpm, total length of planing tables: 2,850 mm, TECHNICAL DATA Planing width 410 mm Feed table length 1620 mm Feed table length 1170 mm Total table length 2850 mm Cutterblock speed 5000 rpm Suction nozzle Ø 160 mm chip removal up to 8 mm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 870 kg TECHNICAL DESCRIPTION Solid German engineering For planing and jointing incl. hollow and pointed joint adjustment for planing width up to 630 mm and max. chip removal up to 8 mm Ergonomic working position directly on the cutterhead PANHANS solid steel cutterblock ø 125 mm with 4 Tersa reversible knives Finely planed machine tables, total table length 2850 mm Top control panel at eye level with digital display of chip removal, current delivery table situation (neutral, hollow or pointed joint), incl. template holder and practical tool tray Nwedpfxoqk Ulus Anfof Electromotive adjustment of the feed table via push-button Hollow and pointed joint adjustment on the feed table Toothed table lips for noise reduction Dressing fence Adjustable in depth and inclination via single-lever operation, inclinable up to 45°, mounted in extremely smooth-running steel guide Anodized dressing fence ruler Pivoting auxiliary fence 1545 Console for feed unit TXF 1570 bridge guard with hinged cover Mechanical motor brake Automatic star-delta start, motor protection switch Planed in at the factory CE-compliant GS tested