Used Panhans 685 A for sale (89)

Condition: used, Year of construction: 1989, with positioning control and Tersa cutterblockcleaned, function tested, test run- machine lubricated- test run- infeed rollers renewed- outfeed rollers renewed- rubber lip front and rear renewed- test planingspare parts:Panhans feed rollers, overhauled controlused, good conditionmake Panhanstype 435year of construction 1989Masch.-Nr. 170GS-testedmotor 5,5 kW / 0,25 kWplaning width approx. 510 mmplaning height approx. 250 mmlink pressure beamrubber infeed rollerrubber outfeed rollerfeed 7/14 m/ber of knives 4 piecesknife systemTersa reversible kniveselectric height adjustmentautomatic positioning controlsound insulationexhaust connection D 160 mmspace requirement approx. 1100 mm x 1200 mm x 1200 mmweight approx. 950 kgtotal connected load approx. 5,75 kWstorage location 97447 Gerolzhofen, free on truck, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Hsdpevwfbiefx Abgep

Condition: used, Year of construction: 1989, with electrical height and swivel adjustment   used, great condition Panhans make Hjdpovxr Sqjfx Abgsp Type 688 Year of manufacture 1989 Machine no. 287 GS-approved Motor 5.5 kW brake Cutting width approx. 1250 mm Cutting length approx. 2700 mm swiveling up to 45 ° Scoring unit Parallelogram protection Electric height adjustment Electric swivel adjustment Angle stop as a miter stop Extraction connection D 120 mm / 80 mm Required space approx. 2800 mm x 3400 mm x 1400 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free on truck, unpacked Handover in the current condition as viewed, without overhaul, without guarantee and warranty

Condition: used, Year of construction: 1993, with Centro-Fix reversible blade Machine cleaned, lubricated, partially repainted made operational, functionally tested fully adjusted Test run Various parts replaced: 4x Tersa blades Rubber guard Used Make: Panhans Type 426 Year of manufacture: 1993 Machine no. 1399 GS wood dust tested Motor 7.5 kW Planing width approx. 630 mm Planing height approx. 250 mm Table guide rollers: 2 adjustable Articulated pressure beam Steel feed roller Rubber feed roller 2 feeds Number of knives: 4 Centro-Fix reversible knives Hodpfxsv Hht Tj Abgjp Digital display for planing height Electric height adjustment with handwheel fine adjustment Sound insulation Extraction connection D 160 mm Space requirement approx. 1300 mm x 1100 mm x 1100 mm Total connected load approx. 8.5 kW Storage location: 97447 Gerolzhofen, free on load, unpacked Handed over in the current condition as seen, without guarantee or warranty

Condition: used, Year of construction: 1990, with hydraulic height and swivel adjustment Used, good to excellent condition Manufacturer: Panhans Model: 690 Year of manufacture: 1990 Hedpfx Ajwkvwtobgsp Machine no.: 705 GS-tested Upgraded motor 5.5 kW Cutting width approx. 1250 mm Cutting length approx. 2700 mm Max. cutting height 145 mm Swivel up to 45° Parallelogram guard Table extension approx. 1000 mm Hydraulic height adjustment Hydraulic swivel adjustment Extraction connection D 120/80 mm Required space approx. 3200 mm x 3500 mm x 1400 mm Weight approx. 1000 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without guarantee or warranty.

Condition: used, Year of construction: 1998, Used, in top condition Make: Panhans Model: 76 Year of manufacture: 1998 Machine No.: 648 Original price approx. €4,800.00 Location: 97447 Gerolzhofen, loaded free, unpacked Handover in as-inspected condition, Hodpfoxuv Nzox Abgjp without warranty or guarantee

Condition: new, Year of construction: 2024, TECHNICAL DATA Table size 1100 x 760 mm Table height 870 mm Milling spindle non-replaceable 30 mm Clamping height 140 mm Height adjustment 125 mm Dust extraction port 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 Light Gray and RAL 5000 Violet Blue Net weight approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Table milling machine with a permanently installed, single-sided swiveling milling spindle for a swiveling range of -5° to +45.5° Positioning control for height and swivel adjustment with zeroing of the height and offset dimension Electronic position and speed indicators 4 speeds 3000 / 4500 / 6000 / 9000 rpm Hodofpb Nmjpfx Abgjp Belt quick-clamping device Push buttons for spindle start and stop Left and right rotation Milling cutter quick-clamping device Finely planed gray cast iron table with rigid frame support Control panel located below on rigid frame support Milling fence 216, total adjustment via handwheel and LCD display, including cast iron fence plates and aluminum splinter guards Machine socket Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE compliant GS tested

Condition: new, Year of construction: 2024, TECHNICAL DATA -Maximum drilling depth: 145 mm -Maximum drilling length: 240 mm -Vertical adjustment: 135 mm -Dust extraction port diameter: 100 mm -Speed: 1500 / 3000 RPM -Color: RAL 7035 Light Gray, RAL 5000 Violet Blue -Net weight: approx. 200 kg Solid German engineering Professional slot milling and precise dowel drilling Hjdpfjfpa Raox Abgsp Fixed table, easily movable drilling motor Travel mechanism for increased mobility Cast iron table 700 x 380 mm, with thick walls and high ribbing Easily adjustable cross slide with adjustable ball guides for lateral and depth adjustment Vertical adjustment via handwheel and scale, drilling depth stop via scale, drilling length limitation adjustable via side stops on the left and right Drilling motor power: 1.3 kW / 1.8 hp or 1.7 kW / 2.3 hp, with pole reversing switch, speed 1500/3000 RPM with motor brake and practical tool storage Includes emergency stop button High-precision three-jaw chuck, clamping range 5 – 20 mm Dowel drilling device for series hole drilling with indexing roller, 16, 22, 25 and 32 mm, highly precise milled indexing, locking via spring-loaded indexing bolt Frame stop can be inserted with indexing bolt for the positions: center, left, right Miter stop can be inserted with indexing bolt for 45° and 22.5°, workpiece stop up to 1500 mm for series processing CE compliant GS tested

Condition: used, Used bandsaw, price ex works. Hsdswx Rp Hjpfx Abgsp

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, For inquiries: Zoltán Utasi +36 30 205 7380 Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Technical specifications Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Hsdeq H Sqdopfx Abgop Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1150kg Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Protective cover with interchangeable wide/narrow insert Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood CE conformity GS tested Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width From 2.8 to 3.8 mm with 0.05 mm grid adjustment per single step, incl. 1 Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system

Condition: excellent (used), Drilling depth 14 cm Drilling height 14 cm Hedpfxsupz Tze Abgep Drilling width 23 cm 2 kW motor Very good condition.

Condition: excellent (used), Length: 260 cm 0.75 kW motor In very good condition. Hodpohpuiujfx Abgop

Condition: used, Year of construction: 1995, functionality: fully functional, input voltage: 400 V, input current: 125 A, input frequency: 50 Hz, type of input current: AC, pivoting range: 50 °, rotational speed (max.): 9,000 rpm, rotational speed (min.): 3,000 rpm, table width: 760 mm, table length: 1,100 mm, total height: 870 mm, overall weight: 850 kg, Equipment: CE marking, We offer this used Panhans 259 tilting spindle moulder, year of manufacture 1995. Type: 259 Machine No.: 4150 Year: 1995 Rated voltage: 400 V Frequency/Phases: 50 Hz / 3 Current type: AC Full load current: 125 A Internal overcurrent protection: 20 A Table size: 1100 x 760 mm Hjdpsyxqqdofx Abgep Table height: 870 mm Spindle mount: MK 5 Spindle speeds: 3000/4500/6000/9000 rpm Height adjustment: 120 mm Table opening, rotary disc diameter: 450 mm Swivel range: -5° - +45° Weight: approx. 850 kg Fully functional Pickup and disassembly at buyer's own risk/expense Location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, cutting height (max.): 155 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, rotational speed (max.): 6,000 rpm, section length (max.): 3,450 mm, TECHNICAL DETAILS Maximum cutting height: 155 mm Maximum cutting height at 45°: 105 mm Maximum cutting width: 1,250 mm Maximum cutting length: 3,450 mm Maximum saw blade diameter: 450 mm Bore diameter: 30 mm Saw blade tilt range: 0 - 46° Speeds: 3,000 / 4,000 / 5,000 / 6,000 rpm Sliding table length: 3,200 mm Scorer: Auto-EPS with motorized positioning for lateral and height adjustment Cross carriage: Standard, with 3 digital flip stops, extendable up to 3,500 mm Rip fence: Motorized control, with positioning control to 0.1 mm Hedpjyx Et Hofx Abgep MACHINE DETAILS Motor power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 3,700 x 2,300 x 1,700 mm Machine weight: 1,250 kg EQUIPMENT Electrical axis control Sliding table completely readjusted Ruler carrier replaced with new system, featuring 3 flip stops Stainless steel scale for angle adjustment renewed Cross carriage checked Longitudinal fence with 90° locking completely replaced Machine electrically inspected Machine completely readjusted, checked, and lubricated Note: The specified data are partially taken from manufacturer's brochures or documents and may differ from the actual values.

Condition: good (used), Year of construction: 1993, functionality: fully functional, operating hours: 7,120 h, cutting height (max.): 100 mm, cutting width (max.): 4,500 mm, saw blade diameter: 400 mm, overall weight: 3,000 kg, cutting length (max.): 4,500 mm, cutting height with scoring (max.): 100 mm, cutting width at rip fence: 3,200 mm, main saw diameter: 400 mm, Equipment: scorer, A well-preserved machine with few working hours. It has been operated by a private customer since new. Hodpfxsvvhfhs Abgsp