Used Paper Bag Machinery for sale (75,211)

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 12 h, input voltage: 380 V, input current: 200 A, type of input current: three-phase, Equipment: CE marking, 1. Material feeding table with moving chain mechanism. Adjustable height min 0.8, max 1.4 and electric drive. 3kw L 4m 2. Large roller shredder with double blades, diameter 1.8m, depth 1.9m 380V 30kw 3. Connection point with a lock for feeding bulk materials to the crushing mill. 4. Hammer mill turbine 380v 35kw 5. Mixer for crushed raw materials, with adjustable feed hatch. Volume 4.8m3 380V 2.2kw 6. Large horizontal granulator with automatic lubrication system and programmable rotor automatic lubrication. Additional cooling of the granulator rings and fine dust extraction. MAX capacity 3T/H 380 90kw Ledpfew Ulp Eox Afwsaf 7. Small moving conveyor belt Width 38cm, Length 2m 380v 0.5kw 8. Large transport belt with head valve Width 38cm Length 6m 380v 1.5kw 9. Pellet cooler with cyclone for fine dust collection and head valve MAX capacity 3.5T/H 380V 3kw 10. Screener/vibrating table with screenings collector and screw feeder. 380V 1.5KW 11. Long screener cylinder with screening mesh Length 3m 380V 1,5kw 12. Conveyor belt with feed to packaging. Length 4.2m 380V 0.75kw 13. BIG BAG packaging unit with calibrated scales, tolerance +/- 5gr per 1T 14. Screw conveyor for feeding material to the automatic packaging machine in bags. Length 5m diameter 27.5cm 380V 3kw 15 Automatic packaging machine with bag sewing and PVC bag sealing. There is also an automatic labeling conveyor table. Max capacity 4.2T/H with air compressor. 16. New semi Electric 3T pallet trolley

Condition: new, Year of construction: 2026, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour. Lsdpfewg Sgcox Afwoaf

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: M06I/9135, Offer Number: M06I/9135 Machinetype: double blow header Make: NATIONAL Type: 61LS Constr. year: 1980/2002 diameter range: 6,35 mm Lsdpfx Afjyya N Sswsaf shaft length under head: 70 mm cutting length: 95 mm output pieces/min: 300 Location: Germany

Condition: used, Automatic Bag Filling Line Lodpsyq Tb Iefx Afwsaf Bag weights from 5kg to 1000kg Infeed with product de-clumper / product breakup breaker and sieve. Incline screw auger to high level hopper and mixer. Delivery system to bag filler where weighing takes place and metal detection before bag filling point. This system comes with a second mobile screw auger for filling 1000kg big bag / sacks Complete with all the controls for the smooth running of this bagging line. After Bagging the bags are sealed with a Saxon Bag Sealer and then stitched with a Singer Bag Stitcher.

Condition: good (used), Polar Mohr 137 XT Autotrim Paper Cutting Guillotine The machine is fully functional and in very good condition. Reviewed and ready to use. This is the most respected guillotine brand, a flagship product. Technical specifications: Cutting width: 1370mm Stack height: 165mm Programmer with touchscreen display Autotrim – a split front table for removing trim Includes the original steel basket. Comb cutting adjustment from the machine’s control panel Ledpfx Aezlakdofweaf Air knife for blowing small debris off the knife Air table Photocells Chrome table surface Ball screw drive for the rear comb Servo-driven saddle control for very fast operation Optical cutting line Enlarged side tables Additional rear table guards Weight: 4500 kg 380V power supply Includes documentation, a tool kit, a safety knife change tool, a tapping block, a spare knife, and one machine knife.

Condition: good (used), Baumann Perfecta 115 Paper Cutting Machine The machine is in perfect condition and ready for production. Year of manufacture: 2021. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Baumann Perfecta premium cutting machines are manufactured in Balingen, Germany. Distinguishing Features of the Baumann Perfecta Machine: – Interactive User Interface – 18.4” Touchscreen – USB Interface – Ethernet Interface – Windows CE Operating System – Positioning via Electronic Handwheel – Optimized Cutting Cycle – Programmable Hold-Down Pressure – Automatic Adjustment of Hold-Down Pressure to Cutting Width – Automated Front-Mounted Knife Change – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Technical Data: Cutting Length: 1150 mm Maximum Stack Height: 165 mm Infeed Depth: 1150 mm Minimum Cutting Capacity with Sheet Metal Under Pressure Beam: 77 mm Minimum Cutting Capacity Without Sheet Metal Under Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Efficiency Knife speed: 44 cycles/min Saddle movement: above the work table Main motor power: 4 kW Lajdpfxszlai Hs Afwjf Net weight: 3200 kg The machine is equipped with a spare knife, cutting sticks, a pressure plate, documentation, and tools.

Condition: good (used), Wohlenberg 115CutTec Paper Cutting Guillotine Machine in very good condition, ready for production. Available immediately from stock. Description: Lsdpozlaigjfx Afwsaf – Color screen – Handwheel positioning – Optimized cutting cycle – Continuously adjustable clamping pressure – Quick knife change – One-piece machine body = increased stability Technical specifications: Cutting length: 1150 mm Maximum stack height: 165 mm Infeed depth: 1150 mm Minimum cutting width with sheet metal under the pressure beam: 97 mm Minimum cutting width without sheet metal under the pressure beam: 30 mm Net weight: 3100 kg

Condition: good (used), Perfecta SL-10 P Paper Stack Lift with Sidewall The device is in perfect technical and visual condition. Virtually unused. Equipped with an adjustable sidewall for easy stacking. Designer look. Lifting capacity: 1000 kg Plate size: 900 x 1300 mm Power supply: 380 V Weight: 650 kg Lajdpfszlag Sjx Afwof The lift is very easy to move, mounted on wheels. The control panel is adjustable to the right and left. Lifting is operated by a photocell. Quiet hydraulic unit.

Condition: good (used), Year of construction: 2014, functionality: fully functional, Buffalo Machinery Microcut BNC 446, Fagor CNC 8055 TC control system, 8-position turret, tailstock, turning length 750 mm, swing diameter 250 mm. Lodpfjzc H Rmex Afwsaf

Condition: new, functionality: fully functional, power: 18.2 kW (24.75 HP), gearing type: hydrostat, fuel type: diesel, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 15 l, color: blue, operation weight: 1,725 kg, lifting power: 600 kg/m, lifting height: 3,380 mm, tire condition: 100 %, drive condition: 100 %, axle configuration: 4x4, number of seats: 1, emission class: euro5, shovel volume: 0.23 m³, Year of construction: 2026, Equipment: all wheel drive, hydraulics, pallet forks, standard shovel, We offer the compact articulated wheel loader Rippa RL06 as a new machine for commercial customers. The machine is ideally designed for tight spaces in landscaping, agriculture, and on construction sites. 🔥 Exclusive Service: 100 km free delivery! We will deliver the machine free of charge to your yard or construction site within a 100 km radius of 76332 Bad Herrenalb. Unloading is carried out easily using our company's own truck. Current Status: The machines are currently in transit. Pre-orders are possible immediately. As soon as the delivery arrives, the machines can be inspected and test driven at our location in 76332 Bad Herrenalb. Performance & Drive: Engine: Kubota D1105 (3-cylinder diesel, water-cooled) Power: 18.2 kW / 24.7 hp Emission Standard: Stage V / EURO 5 Travel Speed: 0 - 8 km/h Tires: Off-road tires for improved traction Operating Data & Hydraulics: Operating Weight: 1,725 kg (transport possible on a 3.5-ton trailer) Safe Working Load (Rated Load): 300 kg Maximum Lifting Capacity: 600 kg Maximum Loading Height: 3,380 mm Maximum Dumping Height: 2,060 mm Hydraulic Cylinder: Double-cylinder lifting system for even force distribution Operation: One-hand multi-function joystick for forward/reverse and lifting system Dimensions: Overall Width: 1,150 mm Overall Height: 2,300 mm Length with Bucket: 3,650 mm Ljdoyzbdtspfx Afweaf Turning Radius (outside): 2,400 mm Equipment & Safety (included): Quick coupler for tool-free changing of attachments Standard earth bucket (0.23 m³) Pallet fork Operator's protection roof with ROPS (rollover protection) and TOPS (falling object protection) Suspended seat with seatbelt and side protection bars LED work lights and rotating beacon CE certification Prices & Model Variants: Standard version: €13,500.00 net plus 19% VAT (€16,065.00 gross) Version with telescopic arm: €15,500.00 net plus 19% VAT (€18,455.00 gross) Sales exclusively to commercial enterprises (B2B). You will receive a proper invoice with VAT shown. Warranty: 2-year manufacturer's warranty on spare parts. Rent with Option to Buy: Once the machines have arrived, we will offer weekly rental of our demonstration unit. If you subsequently purchase the machine, the amount paid for the rental will be fully credited towards the purchase price. Logistics & Contact: Location: 76332 Bad Herrenalb Loading onto your trailer or truck can be done free of charge on site using our crane. If you are interested in placing a pre-order or have technical questions, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2007, Yeo Sheng Machinery TSH-TUVB-1010 Keyway Broaching Machine Capacity: 10 Ton Includes various tools The machine is in good working condition. Location: Hamont-Achel, Belgium Lsdox D Dihspfx Afweaf The seller is not liable for typographical or transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without warranty. The displayed price is exclusive of VAT.

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm turning speeds 75 - 3200 U/min thread M16 ST60 column diameter 98 mm engine output 1,1 kW dimensions 800 x 500 x 2000 mm weight 210 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 Laodpfx Ajprfbusfwef - Built-in automatic thread cutting.

Condition: new, bore capacity in steel (diameter) 32 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 460 x 460 mm Lajdpjkahu Rsfx Afwof turning speeds 75 - 3200 U/min engine output 1,5 kW column diameter 125 mm thread M16 ST60 feed 0,10/0,18/0,26 mm/U dimensions 800 x 500 x 2200 mm weight 350 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm turning speeds 75 - 3000 U/min engine output 1,1 kW column diameter 98 mm thread M16 ST60 dimensions 700 x 450 x 1500 mm weight 200 kg - Height adjustable and angle adjustable table - Movable work table - Prepared for cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop Laodpfx Ajkahu Uefwjf - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Year of construction: 2019, condition: used, functionality: fully functional, Approximately 250 pieces in stock. Ljdpfxoy Uc Sfs Afweaf Price per piece: 100 Euros. A mix of used and new items.

Condition: used, Year of construction: 2003, functionality: fully functional, Well-maintained slicer. Laodpfozfizxex Afwjf

Condition: new, Year of construction: 2026, pressing force: 25 t, Equipment: double-sided, The Marinus Powermax Finger Jointer Line profiles horizontally, applies adhesive, cuts out defects, presses and cuts to length. The unique process creates a clean joint that does not require post-processing. About the Finger Jointer When feeding wood into the machine, it is possible to mark defects, such as knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. For instance, to get cladding or paneling without knots or holes. Before the profiling and also before the pressing, the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. This results in a highly accurate connection of the finger joint, with a flat surface at the joint and a straight end-product. Because of this precision (for most purposes) the wood does not need to be planed or sanded afterwards. The adhesive applicator is mounted to the carriage with the profile cutters. In the returning stroke of the profiling carriage the adhesive is applied. The use of PU adhesive ensures a very strong bond, suitable for outdoor use and in wet environments. While most other finger jointers move the wood transversely (right-angled) past the profiling heads, the Marinus Finger Jointer moves the wood longitudinally (lengthwise) through the machine. This enables feeding in long lengths of 6 meters or even longer. As a result, the machine can process all the wood, including longer lengths, and use it all (except for the defects) for the jointed end-product. This way, there is no good wood turned into short pieces of scrap. Where other finger jointers focus on re-using short pieces of scrap wood, the Marinus eliminates the production of scrap wood. The Marinus Finger Jointer contributes to an efficient and sustainable production process. Specifications: Infeed Lenghts: 450 - 6000+ mm Infeed Widths: 50 - 300 mm Infeed Thicknesses: 8 - 50 mm Length modes: Variable / Fixed Capacity: Up to 8 joints/min This machinery is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machinery is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery. Lasdop R Iwhjpfx Afwsf

Condition: new, Year of construction: 2026, The Marinus Powermax Endmatcher is designed for head-end machining tongue and groove on parquet floorboards, decking and cladding, producing fixed and variable lengths. It can be used for any type of wood; hardwood, softwood, or engineered wood. The machine can cut to length, cut out defects, and do head-end profiling, all in a single pass of the wood through the machine. When feeding wood into the machine, it is possible to mark defects, like knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. Lengths: 450 - 6000+ mm Widths: 50 - 300 mm (optional width of 400mm or 500mm) Thicknesses: 8 - 45 mm Capacity: up to 20 pc/min Length modes: Variable / Fixed / Round. This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery. Lajdpfx Aof Hkgpjfwsf

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 200 mm, The Marinus Powermax Chevron is an advanced machine line for head-end machining tongue and groove on Hungarian-point (Chevron) and herringbone parquet. Several wooden parquet boards can be loaded into the infeed cassette, after which the process runs automatically. First the boards are pre-cut to the corresponding length and angle in the cross cut saw unit, then they go via conveyor to the Chevron machine. Before the profiling takes place the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. Resulting in high profile accuracy with no noticeable edge on the top side when the boards are fitted together. The two arms on which the profiling heads slide back and forth are sturdy built and driven by servo motors, which guarantees that all the boards have exactly the same length and angle. The lengths and angles are stepless adjustable via the user friendly touch screen panel. This clamping system combined with two pre-cut aluminium backing blocks effectively prevents blow-outs and splintering. Lengths: 350 - 1200 mm Widths: 50 - 200 mm Thicknesses: 8 - 22 mm Angle: -45° to +45° Capacity: Up to 10 boards per minute Length modes: Fixed lengths This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery. Ljdpfxsiv R Hho Afweaf

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, load capacity: 8,000 kg, lifting height: 7,000 mm, battery voltage: 380 V, DGUV certified until: 06/2030, overall weight: 10,000 kg, total height: 9,900 mm, Equipment: CE marking, For sale: a two-rail gantry crane, manufactured in 2025 and with only 5 months of service. In impeccable condition, fully operational, and available for viewing in operation before purchase. Key features: Capacity: 8 tons using two independent 4-ton hoists on the main beam Span: 8 m Lifting height: 7 m Overhangs: 1.75 m on each side Overall height: 9.9 m Equipment weight: approx. 10 tons Power supply: 380 V three-phase Travel speed: 20 m/min Manufacturer: Henan Dafang Heavy Machine Co., MHE series Includes: electrical panel, cable reels, control unit, and access ladder Complete documentation: EUROCERT certificates No. 10.16.2627 (gantry crane) and No. 10.16.2628 (electric hoist) in accordance with Machinery Directive 2006/42/EC, valid until 2030, plus manufacturing drawings and declaration of conformity. The dual hoist configuration allows for synchronized handling of long loads, making it ideal for handling pipes and drilling columns, stone processing, precast concrete, and metal structure workshops. Located in Malaga. For sale due to the cessation of the activity for which it was acquired. Price: €26,000 (excluding VAT). Option to sell with dismantling and loading handled by the buyer. Ljdpfozrmigox Afwoaf Operational video available upon request. If you have any questions or need more information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2013, operating hours: 200 h, functionality: fully functional, screw diameter: 65 mm, overall weight: 9,000 kg, clamping force: 785 kN, total width: 1,800 mm, total length: 4,500 mm, total height: 3,000 mm, power: 0.045 kW (0.06 HP), We offer for sale a slightly used injection blow moulding machine in excellent condition. It is connected and fully operational for demonstration purposes. We can also offer several ready-made molds for canisters and lamp shades. The machine is designed for use with PMMA, PC, PP, and PE resins. Ljdpfxothk Rze Afwoaf

Year of construction: 2023, condition: new, functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. Lasdsq E Ti Hopfx Afwof If you want to try it, please bring cable.

Condition: like new (used), Year of construction: 2020, functionality: limited functionality, operating hours: 50 h, power: 50 kW (67.98 HP), input voltage: 380 V, input current: 80 A, input frequency: 60 Hz, type of input current: three-phase, cutting height (max.): 72 mm, saw blade diameter: 380 mm, height adjustment type: pneumatic, actuation type: electric, total length: 7,500 mm, total width: 6,000 mm, total height: 1,900 mm, overall weight: 5,000 kg, table height: 1,000 mm, Equipment: CE marking, documentation/manual, saw blade guard, scorer, AES Alpha Heavy Duty Beam Saw 3200 * 3800 mm | Showroom Condition | Less 100 Hours Category: Panel Saw / Beam Saw Condition: Used – Like new showroom machine Description: For sale: AES Alpha heavy duty beam saw. The machine has been used exclusively in a showroom for demonstrations and training. It is in working condition with less than 100 working hours. Equipped with all Yaskawa and Schneider Electric drivers. Technical Data: Cutting width: 3200 mm Bridge depth: 3800 mm Main motor: 15 kW (20 HP) Scoring motor: 2.2 kW (3 HP) Max cutting height: 72 mm Saw carriage speed: 70 m/min Pusher speed: 60 m/min Max blade: 380 mm Max scoring blade: 200 mm 8 clamps AES Alpha Heavy Duty Paneelzaag 3200 mm | Showroomstaat | Minder 100 Werkuren Categorie: Paneelzaag / Opdeelzaag Conditie: Gebruikt – Zo goed als nieuw (Showroom) Beschrijving: Te koop: AES Alpha heavy duty paneelzaagmachine. Deze machine werd uitsluitend gebruikt in een showroomomgeving voor demonstraties en trainingen. De machine verkeert in uitstekende staat en heeft minder dan 100 werkuren. Uitgerust met hoogwaardige aandrijvingen van Yaskawa en Schneider Electric, wat zorgt voor maximale betrouwbaarheid en precisie. Technische specificaties: Snijbreedte: 3200 mm Brugdiepte: 3800 mm Hoofdmotor: 15 kW (20 HP) Voorritsmotor: 2,2 kW (3 HP) Maximale zaaghoogte: 72 mm Zaagwagensnelheid: 70 m/min Laedpfx Asyzzguefwef Duwbalk snelheid: 60 m/min Max. zaagdiameter: 380 mm Max. voorritsdiameter: 200 mm 8 klemmen Luchtkussentafel (3 stuks): 1 vast, 2 verplaatsbaar Pneumatische zaagwagen beweging Aandrijvingen: Yaskawa & Schneider Levering: Binnen 10 dagen mogelijk Prijs: Op aanvraag

Condition: excellent (used), Year of construction: 1999, control type: NC control, controller manufacturer: UNIOP, working width: 2,520 mm, HM bending machine Model KSM 5 / 2500 Year : 1999 Laodpfsyx Epbex Afwof Capacity : 2520 x 5 mm. INIOP NC control (Swiss made) Manual back gauge

Condition: excellent (used), Year of construction: 2006, Used high-performance roll garbage bag manufacturing machine for sale. Lajdpfeykz Ebjx Afwef Includes: Roll lifter, longitudinal welder, folding unit, bottom welder, and labelling unit. The machine is in perfect operational condition and can be viewed in production. For sale with factory support and spare parts due to underutilization. Technical Specifications: - Welding width: 700 mm - Maximum bag length: 2000 mm - Minimum bag length: 380 mm - Film speed: 120 m/min - Drive: Servo - Number of tracks: 2 Additional Specifications: - Heavy-duty, automatic 2-track roll garbage bag manufacturing machine - Film thickness: - LD/LLDPE: 0.012–0.060 mm (single layer) - HDPE: 0.008–0.015 mm (single layer) - Bag width: 300–700 mm - Line speed: 100–165 m/min (depending on material, thickness, and film quality) - Finished roll size: roll width 200–300 mm; roll diameter up to 130 mm Single-line labelling unit: - Label width: 70–200 mm (1 line) - Label length: 180–350 mm - Label roll diameter: max. 250 mm Year of manufacture: April 2006 Components: 1. TAI-1300C Lifting unwinder 2. SSB-1300A Slitting knife and longitudinal welding unit 3. TA-800C1 Bag making & welding machine 4. TAF-400-2N-M 2-lane folding machine 5. TAD-700 Four-axis spindle winder Other information: - Warranty: No warranty - Current status: In production - Availability: Immediate - Power requirement: 20 kW - Price: EUR 50,000