CNC Swiss-Type Lathe

Citizen Machinery & Boley Cincom M-12

Year of construction: 2000, condition: ready for operation (used), Controls: Mitsubishi, weight: 2.53t. Equipment: counter spindle, tool turret with driven tool stations, linear slide with driven tools, bar feeder interface, tool set and setting tools, spindle monitoring EWL 4444. An on site inspection is possible. Iedpjzcfhqjfx Am Doih

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, General Control system: SIEMENS 840 D Main spindle Bar capacity: 60 mm Speed: 6000 rpm Power: 29 kW Torque: 140 Nm Synchronous spindle Technology: Mounted on the turret Mount: Collet chuck, D = 42 mm Maximum speed: 4,500 rpm Iodpfx Amszgcp Se Dsih Turret 1 (X/Z) Technology: Tool turret with 8 stations Tool holder: For DIN 69880 - 25x48 mm Maximum speed: 6000 rpm Power: 3.3 kW Maximum torque: 7.5 Nm X-axis: 90 mm Z-axis: 280 mm Turret 2 (X/Z) Technology: Tool turret with 6 stations Tool holder: Symmetrical dovetail mount Speed: 4,500 rpm Power: 4.2 kW Torque: 7.5 Nm X-axis: 81 mm Z-axis: 80 mm Equipment Chip management: Hinged belt chip conveyor Coolant management: Coolant pump, 8 bar Part removal: Workpiece removal device Bar loader: Bar loader magazine LM 3200 Ejector: On the synchronous spindle

Condition: ready for operation (used), Year of construction: 2019, X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501h, program run: 3,141h, hydraulics: 8,371h, axes: 1,863h, spindle S1: 2,377h. Equipment: roller guideways in all 3 linear axes (Taiwan manufacture), spindle chiller, hydraulic unit, central lubrication system, oil separator, water gun, air gun, full enclosure, machine light and warning light, M30 machine shutdown, air conditioning unit for electrical cabinet, chip conveyor (scraper-type design), chip bin, work area flushing device, tailstock support for rotary table, roller guideways in all 3 linear axes, CE-compliant design, CTS (coolant through spindle), Heidenhain linear scales X/Y/Z, workpiece probing system, transformer, oil mist extraction unit, collision protection software, spindle thermal compensation, with documentation. An on-site inspection is possible. Iodpfx Aszavyfsm Doih

Condition: used, TECHNICAL DETAILS - maxi bar diameter : 12.7 [mm] - main headstock strokes (fixed/rotary sleeve) : 130/80 [mm] - spindle power : 4 [kW] - rotation speed : 12 000 [rpm] - upper turret : 6 positions - lower turret : 6 positions - number of rotary positions on turret : 6 - sub-spindle maxi diameter : 12.7 [mm] - sub-spindle rotation speed : 12 000 [rpm] - dimensions : 2850 x 110 x 1480 [mm] - hours in production : 12408 [H] - spindle hours : 9400 [H] EQUIPMENT - CNC TRAUB TX 8i control - bar feeder LNS Alpha ST 320 Iodpjuhav Dsfx Am Deih - C axis on main spindle and sub-spindle - brake on main spindle and sub-spindle - parts catcher with conveying strip - anti fire device - lubricating tank with pump with cooling unit - chip conveyor - various fixed and driven tool holders

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg Iisdpof Dwa Uofx Am Doh +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Year of construction: 1997, Also available CONQUEST T51 model The used HARDINGE CONQUEST T42L 3-axis motorized CNC lathe is a robust and precise medium-sized inclined bed numerical control lathe, turning length approximately 700mm, bar passage 42m, automatic turret with 12 positions with motorized tools, FANUC 18-T CNC with color LCD and RS232 serial interface for data transfer 5″ ASA spindle maximum revolutions: 4,200 rpm continuous C-axis 20HP spindle power X-axis travel: 172mm Z-axis travel: 575mm machine weight 4,000 Kg. Complete with 210mm AUTOBLOCK hydraulic chuck, tool presetting, programmable tailstock, 2 motorized tool holders (1 axial and 1 radial), chip evacuator, set of fixed and manual tool holders and backup disk; Year of construction 1997; machine compliant with “CE” standards, in excellent condition. Iiedpfx Asvtrc Ssm Doh

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Iiedeuz If Nepfx Am Doh Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,400 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 1,400 kg, total height: 2,492 mm, total length: 4,367 mm, total width: 3,070 mm, table length: 1,500 mm, table width: 650 mm, spindle motor power: 11 W, rapid traverse Z-axis: 24 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle nose: Iso 40, spindle speed (max.): 8,000 rpm, spindle speed (min.): 40 rpm, tool diameter: 75 mm, tool length: 250 mm, Equipment: documentation/manual, rotational speed infinitely variable, NEW vertical machining center "AWEA BM-1400 II" with FANUC 0i-MF Plus CNC Accessories present: 4th axis interface Air blow system Iederg Htpepfx Am Djih Left side auger chip conveyors Coolant through spindle ( CTS ) at 20 bar Coolant gun Fairing bottom washing system 390 liter refrigerant collection tank Automatic power-off system Alarm light & work light

Condition: excellent (used), Year of construction: 2015, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: G3158-0645, HYUNDAI WIA MODEL L300C 2 AXIS CNC LATHE WITH FANUC 0i-T. Very Low hours usage -2200 hours cutting time COOLANT SYSTEM - HIGH PRESSURE 20 BAR PARTS AUTOMATION - BARFEED INTERFACE CHIP CONVEYOR - SIDE HINGED CNC CONTROL OPTION - MANUAL GUIDE-I (NC FANUC 0i) PROBING - QUICK TOOL SETTER - MANUAL TRANSFORMER - 35 KVA AND CABLE MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • 3,000 Rpm High Power Main Spindle • Heavy Duty Cutting with Excellent Performance • 12 Station Rigid Turret • 20 x 24 m/min Rapid Traverse • Hardened & Ground Solid Box Guide Ways MACHINE CAPACITIES Swing Over the Bed Ø 750 mm Swing Over the Carriage Ø 480 mm Maximum Turning Diameter Ø 560 mm Maximum Turning Length 720 mm Bar Capacity Ø 90 mm SPINDLE Chuck Size Ø 305 mm Spindle Bore Ø 102 mm Spindle Speed (rpm) 3,000 rpm Motor (Max/Cont.) 26/22 kW Torque (Max/Cont.) 1,098/929.7 Nm. Spindle Type Belt + 2 Step Gear Spindle Nose A2-8 FEED Travel X 335 mm Travel Z 750 mm Rapid Speed X 20 m/min Rapid Speed Z 24 m/min Slide Type Box Iiedpfxow Dcdye Am Deh TURRET Number of Tools 12 Tool Size - OD 25 mm² Tool Size - ID Ø 50 mm Indexing Time 0.3 Sec/Step TAILSTOCK Taper MT 5 Quill Diameter Ø 100 mm Quill Travel 120 mm Travel 750 mm TANK CAPACITY Coolant Tank 220 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 30 kVA Thickness of Power Cable Over 35 mm² Voltage 415 V / 50 Hz / 3 Ph MACHINE Floor Space (L x W) 3,506 x 2,002 mm Height 1,997 mm Weight 6,400 kg STANDARD SUPPLIED MACHINE FEATURES • Ø 305 mm Hollow 3 Jaw Power Chuck • 220 L Coolant Tank • Door Interlock • Chuck Clamp Foot Switch • Total Splash Guard • Quill Type Tailstock • Call Light • Standard Live Centre • Quick Tool Setter • Levelling Pads • Operation Manuals • Electrical & Mechanical Drawings

Condition: like new (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,013 h, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, controller manufacturer: Siemens, table length: 1,100 mm, table width: 560 mm, controller model: 840d SL ShopMill Operate, rotational speed (max.): 12,000 rpm, operating hours of spindle: 203 h, For sale is a machining center of the brand Spinner and the type P3-620 The machine has an internal 2 compartment pallet changer, which makes it possible to set up during the work process. Iijdpfxet Sftwo Am Doh Particularly noteworthy are the 203 spindle hours and the very good condition of the machine Technical data: Year of construction: 2011 Control: Siemens 840d-SL ShopMill Operate Spindle speed: 12,000 1/min Spindle holder: SK 40 Table dimensions: 1,100*560 mm Travel X 620 mm Travel Y: 520 mm Z travel: 460 mm Tool changer: 32 pockets (chain) Tool changer head: double arm Pallet changer: 2-fold (180 °) Machine lighting, Chip conveyor in the milling area, Chip conveyor scraper belt with coolant device Belt filter system with IKZ 40 bar Hydraulic oil cooling system, Rotary feed-through in the table On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website