Used Test Machinery for sale (91,065)

Condition: new, New! Designed for bed slats stress tests. Power consumption: 230 V The clamping force adjustable from 2 to 10 bar (till 200 kg). Inspection speeds of ~ 44 pcs. / Min. The adjustable length of the product. Todpofftr Hofx Aaced Simple service. Lamelle test labeled. Marking the label may change.

Condition: good (used), 1 x Burnely Packaging Machinery Heat Shrink Tunnel Model: PE500/300 Fully tested Purchased and installed for a trail product, no longer needed. Tedpjxrcyzofx Aacod Comes with new replacement belts Located in Leek, UK

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: 4200 M1 18, REF: MM6185 1 X Thompson Meat Machinery mixer grinder. Type - 4200. Serial no. - 4200 M1 18. Suitable for mixing and grinding fresh meat and meat down to -4C.  Technical Specifications ⚙️ Machine: ✅ Manufacturer: Thompson Meat Machinery ✅ Model: 4200 ✅ Serial Number: 4200 M1 L8 ✅ Manufactured Date: September 2013 ✅Output capacity - up to 4,000 kg/h (depending on product). ✅Hopper capacity - 390 litres. ✅Mix capacity - up to 200 kg. ✅Head size - #56. ✅Hole plate: 9mm diameter. Motors: ✅Voltage (V): 415 V (for all motors) ✅ Frequency (Hz): 50 Hz (for all motors) ✅ Total Amperage: 39.9 A Motor 1 kW: 2.2 Tjdexdz Injpfx Aaced Amp: 4.65 RPM: 1445 Motor 2: kW: 2.2 Amp: 4.65 RPM: 1445

Condition: excellent (used), Year of construction: 2017, operating hours: 19,187 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, overall weight: 52,000 kg, Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 140 Year of construction 2017 Working hours 19,187 hours, stand October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm Capacity per cycle time 4,34 m³ Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm Driving motor 2 x 75 kW Connected load 226 kW Full load current 428 A Tying system 5-fold vertical, fully automated Throughput rate at a Tedpfx Aasxrta Ejced bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 800 up to 1300 kg, depends on material and bale lenght SPS controller (manuf., type) Telemecanique TSX Micro Operating panel (manuf., type) Schneider MAGELIS Touch Baler dimensions built up with hopper 13,200 x 27,000 x 7,344 mm (l x w x h) Transport dimensions only baler 13.200 x 2.750 x 3.450 mm (l x w x h) Machine weight baler approx. 52 tons Technical data chain belt conveyor: Manufacturer Bollegraaf Typ HBT 1216 Year of construction 2009 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Weight 16 t Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Comments: The press is currently in operation and is to be replaced by a new machine in the 2nd quarter of 2026. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Sigma Kneader Mixer NH-5L The Sigma Kneader Mixer NH-5L is a compact laboratory mixer designed for intensive kneading, mixing, and dispersing of highly viscous materials. It is commonly used in the chemical, food, plastics, rubber, ceramics, and battery industries. Two counter-rotating 'Z' or 'Sigma' shaped mixing blades operate synchronously within a U-shaped mixing chamber. Technical Data (Model NH-5L) Feature Value / Description Manufacturer Shandong Karvil Machinery Technology Co., Ltd. Model NH-5L Power 0.75 kW Voltage / Frequency 380 V / 50 Hz / 3-phase Capacity (Gross / Net) 5 liters / approx. 3 liters effective working volume Mixing Blades Double Sigma shape, counter-rotating Drive Helical gear drive, powered by electric motor Mixing Chamber Material Stainless steel SUS 304 (optional 316) Cover Stainless steel with pressure gauge (visible in photo) Heating / Cooling Connection for liquid jacket (water or oil) Discharge Manual tilting discharge Control Separate control panel with speed regulator, main switch, current/voltage display Protection Class IP 32 Certification CE Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Subject to change and errors in the technical data and information!) Tsdpfx Aasxr Ipbecod If you have any further questions, we are happy to assist you by phone.

Condition: used, Year of construction: 2020, Temperature-controlled processing tanks are vital in various industries, including food, pharmaceuticals, and chemical manufacturing, where precise temperature management is essential for product quality and safety. Here’s a detailed overview of temperature-controlled processing tanks: What is a Temperature-Controlled Processing Tank? A temperature-controlled processing tank is a vessel designed to maintain a specific temperature range during the processing of materials. These tanks are equipped with heat exchange systems, temperature sensors, and control mechanisms that ensure the contents remain at the desired temperature throughout the processing cycle. Key Features - Heating and Cooling Systems: - Heaters: Can be electric or steam-based to raise the temperature of the contents. - Chillers: Usually water or glycol-based cooling systems to lower the temperature. - Insulation: Tanks often come with insulation to minimize heat loss or gain from external environments, maintaining stable internal conditions. - Temperature Control Systems: Sophisticated controllers and sensors (like thermocouples) monitor and adjust the temperature in real-time, providing precise control over the processing environment. - Mixing Mechanisms: Many temperature-controlled tanks have integrated mixers or agitators to ensure uniform temperature distribution throughout the contents. - Material Construction: Typically made from stainless steel or other materials that are resistant to corrosion and can withstand high temperatures. Applications in the Food Industry - Pasteurization: Heating milk and other liquids to kill bacteria while maintaining product quality. - Cooking: Precise temperature control during cooking processes (e.g., making sauces, soups, or jams) to ensure proper texture and flavor. - Fermentation: Regulating temperatures during fermentation processes (e.g., beer, yogurt) to ensure the right conditions for microbial activity. - Storage: Maintaining the quality of sensitive ingredients (like chocolate or dairy) by controlling temperatures to prevent spoilage. Tedpfxexm Spzs Aacjd Advantages of Temperature-Controlled Processing Tanks - Quality Assurance: Consistent temperatures lead to uniform product quality, flavor, and texture. - Safety: Helps in maintaining food safety standards by ensuring thorough cooking or pasteurization processes. - Energy Efficiency: Advanced control systems can optimize energy use, reducing operating costs. - Versatility: Suitable for various processes including heating, cooling, and maintaining temperatures for different food products. Considerations - Control Precision: The accuracy of temperature control systems is crucial; look for tanks with advanced control features for better reliability. - Cleaning: Ensure that the tank design allows for easy cleaning to comply with sanitation standards, especially in the food industry. - Integration: Consider how easily the tank can be integrated into existing processing lines and systems. High shear mixers are essential equipment in the food processing industry, particularly for emulsifying, blending, and homogeneously mixing ingredients with varying viscosity levels. Here’s an overview of how they work and their applications: What is a High Shear Mixer? A high shear mixer is designed to create high shear forces that thoroughly mix ingredients together. It typically consists of a rotor-stator assembly where the rotor rapidly spins, creating a vacuum that draws ingredients into the m...

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 01-2142-071, controller manufacturer: ITALY - OSAI, controller model: OSAI, workpiece length (max.): 4,200 mm, workpiece width (max.): 2,100 mm, table width: 2,100 mm, table height: 20 mm, table length: 4,200 mm, overall weight: 6,000 kg, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 8, input voltage: 380 V, type of input current: three-phase, Used excellent conditions CNC nesting machine from AES WOODWORKING MACHINES. End user bought 2024 new Raptor Ultra and replaced this Raptor. *Model : RAPTOR 2142 *Heavy duty body and bridge frame *Dimensions Y : 4200 mm -- X : 2100 mm *Double working zone (extra cylinders have been located in working table for processing narrow parts) *13V + 3*2 H +2 Saw blade Multi drill included * Vacuum pump & connections included *Tools are not included *OSAI controller included *PC in the cabinet has beed updated on 12/2023 Machine was working properly in customer production plant, processing pictures and videos available. Todpfjxrb S Aex Aacsd Please do not hesitate contact with us.

Condition: good (used), 1 x Burnely Packaging Machinery Heat Shrink Tunnel Model: PE500/300 Fully tested Purchased and installed for a trail product, no longer needed. Tedpfsxrcyusx Aaced Comes with new replacement belts Located in Leek, UK

Condition: excellent (used), 1 X Machinery Automation Ltd Capping line Tsdjw E Ey Topfx Aacjd Technical specification: ✅ Manufacturer - Machinery Automation Ltd ✅ Model - MA-CET70 Capping Line. ✅ Cap Types - Screw Cap, Jar, Foamer, Dropper, pre-formed ROPP. ✅ Cap Diameters - 18 – 70mm (extended to 90mm). ✅ Bottle Heigh - 30 – 300mm Notes: This has been built for glass jars, which include a 43mm cap, a 53mm cap, 73mm cap and 70mm cap. There are 4 x change parts with the elevator to suit these and the capper gets adjusted to suit without any change parts.

Condition: used, Year of construction: 2025, Year of manufacture: 2025 CE mark: yes Large Machinery Auction – FPM bv & Troostwijk Auctions Tsdpfoxql S Dox Aaced Your chance to acquire high-quality machines at competitive auction prices! FPM bv, in collaboration with Troostwijk Auctions, is organising a major machinery auction featuring a wide selection of industrial, construction, and agricultural equipment. From telehandlers to forklifts and mini tractors – everything is sold online to the highest bidder! Auction closes: November 12 from 19:00 Location: Wekerom Bid online via: Whether you’re active in construction, production, or engineering – this auction offers unique opportunities to expand your machinery fleet under attractive conditions. All lots have been carefully inspected and come with clear photos and detailed descriptions on the Troostwijk platform. Don’t miss this opportunity – place your bids and benefit from top-quality machines at a great price!

Condition: good (used), Hardness tester functional Tedpfoxr Atbox Aacod

Condition: used, Year of construction: 2024, New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice cream Fermentation, Sauces, Brewery industry, etc. Applications: - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products. - Cheese Production: Used before cheese-making to ensure safety. - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream. Tedpfx Aasxl N Niocod Advantages of Batch Pasteurisation: - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations. - Flexibility: Suitable for small batches or varied products and recipes. - Quality Control: Allows for greater control over the pasteurisation process. Capacity: 600 Litres Agitation: Upon Request Temperatures: 95 Degrees Max Heating: Via Heating Elements Self Heated Chart Recorder: Digital Chart Recorder Construction: Fully Stainless Steel Jacketed: Fully Insulated Thickness of Stainelss steel: 3 mm Outlet: DN 40 Top Cover: Open top cover with twin openings CIP: Spray ball Cooling: Circulation of cold water through the jacket Temperature Loss: 2 degrees Over 8 hours Temperature Regulation: Controller to Adjust Temperatures Safety Sensor: No water in jacket No Heating Available: Immediately Finance Available: Pay Monthly, Ask For A Quote

Year of construction: 2020, condition: used, with sectional conveyor belt, SIEMENS Simatic HMI Touch control, operator panel with stairs and railing, min. sheet size: 400x350 mm, max. sheet size: 1060x760 mm, minimum material weight: paper 90 g/m², maximum material weight: solid board 2,000 g/m², maximum paper stack weights: main stack: feeder 1,000 kg, delivery 900 kg, auxiliary stack: feeder 380 kg, delivery 50 kg Tjdpfx Ajxnanbeacod

Condition: excellent (used), 1 x Packaging machinery powder feeder. Located Melksham, Lift out £20. UKFM1-6804 Todpfx Aajxgg Tuocjd

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm turning speeds 75 - 3000 U/min engine output 1,1 kW column diameter 98 mm thread M16 ST60 dimensions 700 x 450 x 1500 mm weight 200 kg - Height adjustable and angle adjustable table - Movable work table - Prepared for cooling system Tedpfx Askahu Usacsd - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: NC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: Max, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness copper (max.): 6 mm, table height: 1,464 mm, working length: 3,000 mm, working width: 1,500 mm, repeat accuracy: 0.02 mm, power: 15 kW (20.39 HP), input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, total length: 6,000 mm, total width: 1,850 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, nozzle changer, safety light barrier, Fiber Laser Gantry Cover CE- Industrial fiber laser. Laser power: 1500/2000/3000/4000/6000W. Dimensions: 3000x1500mm Required floor space: Todpfowgxq Uox Aacod 4600x2450x1700mm Laser head: automatic focus Automatic nozzle control - Touch pad safety (NEW) Fiber laser source: Fiber Source Laser power: 1000W 1500W 2000W 3000W 4000W 6000W Water chiller: S&A Control system: FASTCUT / FSCUT Cypcut Linear guideway: HIWIN Rack & pinion: YYC M2 precision Total power: 15Kw Repeat positioning accuracy: 0.03mm Maximum speed: 120m/min Maximum acceleration: 1.5G Contact us without obligation for more information.

Condition: ready for operation (used), Year of construction: 1992, A semi-automatic tube filling and sealing machine Norden Machinery with chute and vacuum tipper is available. Filling volume range: 1ml-300ml, container volume: 90l, filling capacity: approx. 140tubes/min, machine dimensions X/Y/Z: approx. 2500mm/1400mm/2400mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible. Tjdpfx Aexn Aagoacjd

Condition: used, Year of construction: 2025, New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc. Applications: - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products. - Cheese Production: Used before cheese-making to ensure safety. - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream. Advantages of Batch Pasteurisation: - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations. - Flexibility: Suitable for small batches or varied products and recipes. - Quality Control: Allows for greater control over the pasteurisation process. Tjdpfx Aaoxl N H Ujcjd Volume capabilities (litres): 300 Control panel: Stainless steel Control box, Controls, Thermometer Controller, ON/OFF Agitator, Chart Recorder; ; Heating options: Heating Elements, Hot Water and Steam Milk pasteurisation: 68-75c Max temperatures: 95c Cooling options: Connection to Ice Bank and Circulation Cold water through the Jacket; Plate Cooler Connection on the Outlet; Heating time: Between 30m-1hr for BPT100 to BPT500 Series With Heating Elements; BPT600 -BPT2000 Heating by HOT water or Steam; Cooling time: 30min to 45min Depending on Cooling Temperatures; Plate cooler at 30min Standard; Structure: Stainless steel 316L & 304 Triple Jacket with Insulation; ; Agitation: Slow Agitation with double props at two diferent levels; High Shear mixing for Ice Cream; Cleaning: Spray ball internally for even cleaning by circulation of Hot water and chemicals used in the food industry; ; Automation: We offer Full automation on our batch Pasteurisers that cover the full circle of heating down to cooling; Additional Costs will be added for automation; Openings: Two Up Folding Covers for Easy Cleaning and Inspection; ; Product outlet: DIN40-DIN50 On semi cone to make sure all product flows out; ; Uasege: Milk Pasteurisation/ Ice Cream Mixing/ Ice Cream Fermentation/ Sauces/; ; Lead time: 5-8 weeks from Order Delays may apply during COVID 19; ; Finance Available: Pay Monthly, Ask For A Quote

Condition: used, Concrete sample press for concrete and material testing Flexural strength test Tjdexb Nv Uopfx Aaced Determination of compressive strength

Condition: new, Year of construction: 2025, pressing force: 25 t, Equipment: double-sided, The Marinus Powermax Finger Jointer Line profiles horizontally, applies adhesive, cuts out defects, presses and cuts to length. The unique process creates a clean joint that does not require post-processing. About the Finger Jointer When feeding wood into the machine, it is possible to mark defects, such as knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. For instance, to get cladding or paneling without knots or holes. Before the profiling and also before the pressing, the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. This results in a highly accurate connection of the finger joint, with a flat surface at the joint and a straight end-product. Because of this precision (for most purposes) the wood does not need to be planed or sanded afterwards. The adhesive applicator is mounted to the carriage with the profile cutters. In the returning stroke of the profiling carriage the adhesive is applied. The use of PU adhesive ensures a very strong bond, suitable for outdoor use and in wet environments. While most other finger jointers move the wood transversely (right-angled) past the profiling heads, the Marinus Finger Jointer moves the wood longitudinally (lengthwise) through the machine. This enables feeding in long lengths of 6 meters or even longer. As a result, the machine can process all the wood, including longer lengths, and use it all (except for the defects) for the jointed end-product. This way, there is no good wood turned into short pieces of scrap. Where other finger jointers focus on re-using short pieces of scrap wood, the Marinus eliminates the production of scrap wood. The Marinus Finger Jointer contributes to an efficient and sustainable production process. Specifications: Infeed Lenghts: 450 - 6000+ mm Infeed Widths: 50 - 300 mm Infeed Thicknesses: 8 - 50 mm Length modes: Variable / Fixed Capacity: Up to 8 joints/min This machinery is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machinery is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery. Todpfx Aaep R Iwhocod

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,300 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 15 m/min, controller model: LNC-Control, workpiece length (max.): 150 mm, total height: 2,100 mm, total length: 3,100 mm, total width: 1,860 mm, rotational speed (min.): 1,000 rpm, rotational speed (max.): 24,000 rpm, number of spindles: 1, number of slots in tool magazine: 8, tool weight: 600 g, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMA-Machinery designs and assembles Dutch CNC routers and CNC portal milling machines. Flexible operation is ensured by the CadCm software from "PEGASUS"—draw easily using macros or freeform lines. No G-codes are required; you can import your own designs via DXF, DWG, EPS, PLT, and more. Continue using AutoDesk Fusion, AutoCAD, SketchUp, or other CAD programs without limitation. Available working areas and prices: • 1300x2600mm, Z-axis 200mm: €31,800 • 1600x3200mm, Z-axis 200mm: €37,500 • 2100x3200mm, Z-axis 200mm: €41,600 CNC Milling Machine BudgeCraft: Compact High-Precision Machining Center (0.01 mm) Dutch-assembled CNC milling machine compliant with EG2023 EUROPE CE-Standard. Spindle Motor (ATC Spindle): - Tool holder type: ISO-BIESSE - Inverter-controlled spindle motor. 3-axis controlled, 3,000–24,000 rpm. Double linear high-precision guides guarantee maximum accuracy. The 2nd Z-axis is positioned by a ball screw, enabling 3D and relief machining. - Tools are clamped automatically. Spindle sensors monitor correct clamping and release of tool holders. During tool changes, both cones and spindle are pneumatically cleaned. Drive System: - Brushless servo motors allow for high acceleration and extremely high speeds. These motors reduce maintenance due to digital control and feedback, providing greater precision and improved machining finish. - Linear tool magazine located under the gantry, with 8–14 spacious positions. Automatic tool changer. Reference Stops: - Reduced cutting losses and efficient, rapid positioning using stop cylinders at the front of the vacuum worktable. Standard rear-mounted solid stop cylinders for large sheet dimensions are directly attached to the table. Automatic Tool Length Measurement System: Milling Spindle Protective Cover: - A key safety device that protects the motor from foreign objects and debris, helping to extend motor life and improve workplace safety. CNC/NORM EG2023-EUROPEO Safety: - Optical electronic safety ensures immediate stoppage of the machine when a person enters the secured area, protecting individuals from machine-related hazards. Technical specifications: - X-axis working range: 2,600–3,200mm - Y-axis working range: 1,300–1,600–2,100mm - Table size options: 1326 / 1632 / 2132 - Z-axis stroke: mm - Structure: Portal / Gantry construction: Yes - Spindle motor: 9kW air-cooled - ATC spindle: Yes - Speed: 3,000–24,000 rpm - X-axis movement: 50m/min - Y-axis movement: 50m/min - Z-axis movement: 15m/min - Tool holder: ISO30–ER32/ER40 - Software: Pegasus PWoodMilling - Vacuum pump: Side channel blower turbine vacuum pump Todpfx Aajxl Apiscsd 7.5kW, max flow rate: 340m³/h

Condition: used, Year of construction: 2025, The HTST (High-Temperature Short-Time) pasteuriser from Dairy Machinery UK is designed to provide efficient pasteurization of liquid dairy products while preserving their quality and safety. Here are some key features: - Process Efficiency: HTST pasteurisation involves heating the dairy product to a high temperature (typically around 72°C and other temperatures on request ) for a short time (15-30 seconds and other timings on request ), which kills harmful bacteria and extends shelf life. - Quality Preservation: This method retains the taste and nutritional value of the dairy products better than traditional pasteurization methods, minimizing the impact on flavor and color. - Automated Control: Many HTST systems come with automated controls that monitor temperatures and flow rates, ensuring consistent pasteurisation and reducing human error. - Compliance Standards: Designed to meet industry hygiene and safety standards, HTST pasteurisers help dairy producers comply with food safety regulations. - Versatility: Suitable for various dairy products including milk, cream, cheese, and yogurt, making it a valuable asset for dairy processors. Capacities: 500 Litres to 30,000 Litres per Hour Heating: Electric, Hot water and Steam Controls: Fully Automated PLC SIEMENS CE Certified: Yes Skid Mounted: Stainless steel Skid 316L Safety valves: Yes Non return Valve: Yes Balance Tank: Yes Product Pump: Yes Tedpfexfr Smjx Aacjd Water Pump: Yes Regulating Valve for Hot water: Yes Heavy Duty Construction: Yes Temperatures: 73-75-80-85-90 Depending on Request UHT Possibility: Yes Finance: Available for UK Clients

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 200 mm, feed length X-axis: 3,200 mm, feed length Y-axis: 1,600 mm, feed rate X-axis: 70 m/min, feed rate Y-axis: 70 m/min, feed rate Z-axis: 25 m/min, controller manufacturer: Syntec, controller model: SYNTEC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Price: On request CNC NESTING ROUTER MACHINE WITH 0-360º SAW CNC Machining Centre Year of manufacture: 2025 Hiteco CNC 12kW milling motor HSK63F tool holder Tool changer magazine, 10 positions Multi-drill unit 7 vertical drills 8 horizontal drills 1 X-axis groove saw 1 Y-axis groove saw Software: PWood Pegasus Working area X-axis: 3,200 mm Working area Y-axis: 1,600 mm Working area Z-axis: 200 mm Vacuum pump Becker VTLF2.250 5.5kW Omron safety light curtain Central automatic grease lubrication Extraction connection diameter: Ø200 Required capacity: 28m/m | 2,900m3/h Weight: 3,200 kg Tedpfxjtty Ahe Aaced Free 1-year online help desk. Teamviewer support in English. This service prevents unnecessary downtime. Delivery and installation in Europe.

Condition: used, NEW BUTTER EXTRUDERS AND SHAPING MACHINES BUILT BY New Butter Extruder and Shaping Machines By Butter Extruder and Shaping Machine Butter Extruder Semi - Automatic Butter Extruder, Shaping and Cutting Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Cutting wires on outfeed conveyor making the machine user friendly . Extruding, Shaping and Cutting Machine Emergency Stop Button. Condition :New Mould Samples TECAFORM AH Blue Our New Special Designed Extruding Outlets TECAFORM AH Blue meets all applicable requirements for declaration of Food Contact. European regiulation EC 10/2011 and Ammednments European Regulation EC 1935/2004 Council Regulation EC 2023/2006 (GMP) FDA §21 CFR 177.2470 We use High Quality Parts Uses High Quality parts on the new range of DMUK EXSH 1 by Adding Certified Reducers, Stainless Steel Parts and Bestspoke Control Parts. Machine Design and Construction. Having Expirienced Engineers and Designers Working on a Full Range of Work Shop Machinery, CNC, Plasma Cutters, Moulding Machines we Provide High End Quality and Competitive Lead Times. Usage: Butter and Various Viscous Pastes Construction: Fully Stainless steel and Glass Blasted to provide the finish on the metal and harden the surface. Shapes and sizes: Choose your own shpe and size Volumes: Depending on Model we can offer machines for 50g Up to 25Kg Blocks in Boxes. Hopper volumes on extruders: 18 Litres and 50Litres Control panel: Butter Working Switch, Butter Extruding Switch, Start/Stop and Safety: Machine is Equiped with Stainless Steel Cover that Brings The Machine To a Stop If This is Opened. Cutting: Cutting Wires come down manualy and bring the machine to a Stop Out feed: Out Feed Conveyor is Built with Stainless Steel Rollers that help the Prodcut Slide Out Avoiding any Sticking and Changing The Prodcut Shape. Electricity: This Machine can work on Single Phase 220v /50hz , 3Phase 400v / 50hz and US Electrics on 60hz. Choose on Order. Lead time: 5weeks Warranty: 12 months Spare parts: Dairy Machinery UK Tedsurulpjpfx Aacjd Finance Available: Pay Monthly, Ask For A Quote

Condition: ready for operation (used), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 110 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 15 m/min, work area dimensions: - 1550x3200mm Numerical control CNC-Control LNC Working field X-axis 3200mm Working field Y-axis 1550mm Stackable infeed table Automatic loading system with lifting table 2,000kg ATC spindle 9kW Automatic tool changer with 16 positions Drilling head with 12 spindles - 12 vertical - 2 grooving saws X-Y axis Automatic unloading with motorized conveyor belt and end safety stop Automatic worktable dust extraction and cleaning Perimeter work area protection with light curtain Automatic lubrication system Becker vacuum pump 250m³/h VLF2.250 5.5kW Tedsw Tdf Njpfx Aacsd Please submit inquiries stating your company and telephone number.