Used Paper Cup for sale (3,750)

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW Nedpozp H R Ejfx Afwjwk System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: excellent (used), Year of construction: 2017, operating hours: 86 h, functionality: fully functional, machine/vehicle number: 5180, Size 63 x 92 cm, V-type feeder, Suction tape feeder board, Preset sidelay, Paper size preset, Ryobi fully automatic plate changers, Plate register remote control, Ryobi PCS-G printing control, PDS-E spectrojet, Ryobi D-matic alcohol dampening system, Ink roller temperature control, Automatic blanket wash, Automatic roller wash. Nwjdpfx Aowzvzmefwjk

Condition: excellent (used), mileage: 101,166 km, power: 309 kW (420.12 HP), first registration: 03/2020, tire condition: 50 %, axle configuration: 8x2, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2020, Equipment: air conditioning, crane, electric window regulation, power mirror, = Additional options and accessories = - Aluminum fuel tank - Cabin - Electric windows front and rear - Power take-off (PTO) - PTO - Speed limiter - Sun visor = Remarks = Superstructure Construction year: 2019 Crane Number of hydraulic extensions: 2 Remote control: ✓ Load Hook: ✓ Rotator: ✓ Clamshell bucket: ✓ Njdpfxozubxbo Afwowk Winch: ✓ In perfect condition and directly from the Belgian government! Volvo FM 420 with crane/tipper and work platform with extra crane; this is ideal for waterworks or cable layers. In addition to the options already mentioned, it features: -HMF 1320 K with remote control -5th and 6th function -pin -Rotator -tap 2 SWINGLIFT 250 with winch function, this is in the tool case -WAF kipper, tipping left and right -8x2 chassis with 3 steering axles etc etc This truck has Belgian papers and is ready for immediate use. = More information = Axle configuration Tyre profile: 50% Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels Rear axle 2: Steering Weights Empty weight: 16.095 kg Functional Crane: HMF 1320 K RADIO REMOTE!, year of manufacture 2019, on rear of chassis Make of bodywork: WAF Extendable superstructure: Yes Tipper: Left / Right Condition Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 480 mm, rotor width: 1,500 mm, power: 110 kW (149.56 HP), rotational speed (max.): 80 rpm, Genox K1500 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 110kW Drive motor (90kW & 150kW dual drive options also available) with heavy duty oversized gearbox, 80rpm shaft speed as standard. 1500mm wide x 480mm diameter Rotor with 88pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Hydraulic, fast acting swing type ram force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle. Nwodpfezudh Eex Afwek

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 650 mm, rotor width: 2,200 mm, rotational speed (max.): 80 rpm, Genox BH2200 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 180kW combined motor power (150kW & 220kW options also available) with heavy duty oversized gearboxes, 80rpm shaft speed as standard. 2200mm wide x 650mm diameter Rotor with 95+6 pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Hydraulic force feeding of material according to motor loading and timers. Nwsdpfx Afezudi Nowjk Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle.

Condition: new, Year of construction: 2026, rotor diameter: 400 mm, number of blades: 55, rotor length: 1,200 mm, power: 55 kW (74.78 HP), rotational speed (max.): 80 rpm, Genox V1200 Series - Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 55kW Drive Motor with heavy duty oversized gearbox, 80rpm shsft speed as standard. 1200mm wide x 400mm diameter Rotor with 55pcs 40mm Concave reversible alloy steel blades. Hydraulic force feeding of material according to motor loading and timers. Nodpfx Afeztxlpowjwk Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 480 mm, rotor length: 2,000 mm, power: 150 kW (203.94 HP), rotational speed (max.): 80 rpm, Equipment: rotational speed infinitely variable, Genox BH2000 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 150kW combined motor power (110kW & 180kW options also available) with heavy duty oversized gearboxes, 80rpm shaft speed as standard. 2000mm wide x 480mm diameter Rotor with 95 pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Hydraulic force feeding of material according to motor loading and timers. Nwsdpfxeztxmtj Afwjk Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle.

Condition: excellent (used), mileage: 579,675 km, power: 265 kW (360.30 HP), first registration: 07/2015, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, Year of construction: 2015, Equipment: differential lock, Tractor MAN TGX 18.360 First commissioning: 20.07.2015 Read speedometer reading: 579,675 km Automatic gearbox: 12 gears Emission class: 6 Unladen weight: 7320 kg Wheelbase: 3.6 meters Tires on the first axle: +/- 50 Tires on the second axle: +/- 80 Brake lining on first axle: 99 - 98 % Brake pad on second axle: 44 - 42 % Adaptive cruise control Automatic air conditioning On-board computer Central locking Differentiated locking system Electric windows and mirrors Njdpfxjzl Tn Ne Afwowk GPS Orthopaedic seats Seat heating .... Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, number of axes: 3, This 3-axis IMA BIMA 410 CNC Wood Machining Centre was manufactured in 2000. It features a working area of 3000 mm in X and 1200 mm in Y, with a maximum clamping height of 100 mm. The machine is equipped with an automatic central lubrication system and AC servo motors for precise operation. If you are looking to get high-quality wood machining capabilities, consider the IMA BIMA 410 machine we have for sale. Contact us for further details. Nodpfx Aszug Afsfwewk • Working area X: 3000 mm • Working area Y: 1200 mm • Max. clamping height Z1: 100 mm • Max. workpiece thickness Z2: depending on equipment/application • Table height: approx. 1000 mm • Pendulum operation X: 2 × 1400 mm • Free space center X: 200 mm • Pendulum operation alternative X: 2 × 900 mm • Free space center alternative X: 1200 mm • Machine weight: approx. 6000 kg • Guide system: precision linear guides hardened approx. 62 HRC • Central lubrication: automatic for all main axes and ball screw • Drive system: AC servo motors with encoder • X/Y drive: rack and pinion • Z drive: ball screw • Feed rate: 40 m/min • Rapid traverse X/Y: 80 m/min • Rapid traverse Z: 25 m/min • Acceleration: 3 m/s² • Extraction connection main spindle: 300 mm • Extraction connection drilling spindles: 120 mm • Air speed: approx. 28 m/s • Air volume: approx. 7080 m³/h • Vacuum pump capacity: 100 m³/h • Compressed air connection: 1/2" • Air pressure: 6 bar • Control voltage: 24 V DC • Connected load: approx. 24 kVA • Power supply: 3/N/PE 400/230 V 50 Hz • Frequency converter: 0–480 Hz • Ambient temperature: +15 to +35 °C • Control system: IMATRONIC NT 231 • Interpolation: linear all axes, circular 2.5D • Resolution: 0.001 mm • Spindle: HSK F63 • Tool clamping force: 11000 N • Max tool weight: 6 kg • Speed range: 1500–18000 rpm • Spindle power: 7.5 kW • Cooling: water cooled • CNC axis: 360° rotating • Tool magazine type: plate changer • Tool positions: 18 • Max tool length: 150 mm • Max tool diameter: 100 mm (150 mm with free сосед positions) • Max load: 60 kg • Saw unit motor: 1.5 kW • Saw speed: 5600 rpm • Saw blade diameter: max. 150 mm • Drilling unit: 14 spindles • Spindle stroke: 70 mm • Drive: 2.2 kW • Speed: 3150 rpm • Drill diameter max: 20 mm • Adapter head spindles: 4 • Speed max: 6000 rpm • Drill diameter max: 12 mm Table equipment: • 6 adjustable support arms • 12 suction cups 114 × 159 × 100 mm • 6 suction cups 125 × 75 × 100 mm • Vacuum system: 2-circuit clamping system • Electrical cabinet size: 2000 × 1800 × 600 mm DEFECT: • The main spindle no longer releases the interchangeable drill head

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Paper roll gripper, Bolzoni Auramo model AR-25RJ-16F (1-2 roll clamp, split long arm) Capacity: 2000 kg Load Center: 800 mm Roll Range: 700-1600 mm Height: 830 mm Weight: 760 kg Horizontal Center of Gravity: 292 mm Vertical Center of Gravity: 360 mm Nedey Uru Aepfx Afwswk Effective Thickness: 190 mm Warning: Sold without a solenoid valve. All information is on the data plate. Condition: Ready for operation and fully functional. Technical condition: Very good. Available from July 15th, following the installation of the new gripper.

Condition: used, mileage: 300,000 km, power: 120 kW (163.15 HP), first registration: 11/2018, fuel type: diesel, overall weight: 3,050 kg, color: black, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle number (for inquiries): 44 Mercedes-Benz VITO MIXTO 116 LANG 7G-TRONIC 4X4 Paint code: Paint color: Arctic White MB 9147 Equipment: * A1N Rear axle shaft, NEAPCO brand * C447 - * CF0 Basic chassis * CL1 Steering wheel, adjustable for tilt and height * CL3 Leather steering wheel * CL4 Multifunction steering wheel with trip computer * E07 Hill start assist * E34 Backup battery for starting * ED4 12 V 92 Ah battery * EL9 2-way speakers, front and rear * EN7 Audio 15 * EZ5 Parking package * EZ7 Active Parking Assist * F447 - * F48 Heated windshield washer system * F61 Interior mirror * F66 Lockable glove compartment * F68 Heated and electrically adjustable exterior mirrors * FJ3 Double cup holder in the center of the cockpit * FKB Station Wagon * FR8 Rear view camera * FZ8 Comfort opening and closing with IR remote control * G42 7G-Tronic Plus * H00 Warm/cool air duct to the passenger compartment * H12 Auxiliary hot water heater / parking heater (Webasto) * H15 Heated front passenger seat * H16 Heated driver seat * H20 Heat-insulating glass all around * HH4 THERMOTRONIC automatic climate control * HI1 Climate zone 1 (cold/comfort) * HY1 Radio remote control for auxiliary hot water heater * IB6 C447 Vito/V-Class series * IG5 Basic * IK0 Complete vehicle * IL1 Domestic (Germany) * IL4 EU/EFTA region * IL5 Left-hand drive * IN2 Wheelbase 3200 mm, long overhang * J55 Seat belt reminder for front passenger seat * JA1 Windscreen washer fluid level warning light * JF1 Rain sensor * JK3 Instrument cluster with pixel matrix display * JW8 Attention Assist * JX2 Service interval 40,000 km * KB6 Main tank 57 liters * L Left-hand drive * LA2 Headlight assist * LC4 Comfort overhead control panel * LD9 Interior light(s) in the rear * LE1 Adaptive brake light * LX5 Europe * M40 Alternator 14V/200A * MA6 Emissions class Euro 6b N1 * MG3 Engine OM651 DE 22 LA 120 kW (163 hp) * MG9 Alternator management * MJ8 ECO start-stop function * MS1 Cruise control * MX0 BlueEFFICIENCY package * OA3 Diesel customer service measure Tax Code 1 * OD4 Diesel Customer Service Tax Code 4 * Q50 Removable Trailer Hitch Ball Head * SA6 Passenger Airbag Nwsdpfjwbmpuex Afwek * SB1 Driver's Comfort Seat * SB2 Passenger's Comfort Seat * SE4 Lumbar Support for Passenger Seat * SE5 Lumbar Support for Driver's Seat * T14 Active Sliding Door Lock * T70 Child Safety Locks on Passenger Compartment Doors * T74 Grab Handle for Entry * U73 Armrests for Passenger Compartment Seats * US4 3-Seater Comfort Bench Seat in 1st Row, Outer Seat Folding * V23 Interior Trim, Upscale Version * V36 Roof Lining * V41 TPO Plastic Flooring in Passenger Compartment * VH1 Grab Handles in Rear * VV2 Cargo Anchoring Rail System * VV9 Roof Frame Mounting Points * VY2 Black Tunja Fabric * W16 Front Left Window, Fixed in Sidewall/Sliding Door * W17 Window Front right, fixed in side wall/sliding door * W29 Fixed rear window * W65 Tailgate * W70 Tinted rear window, black glass * W78 Window in tailgate/rear door with wiper and washer system * X30 Registration Certificate Part 2 * XA6 Weight variant 3.05 t * XC8 VIN visible from outside * XC9 COC papers * XN8 Modification year U8-II * XO9 Mercedes-Benz Mobilovan with DSB and GGD * XU1 Signs/Printed Texts in German*

Condition: excellent (used), PERFECT PFG-70150AHRD Surface Grinding Machine Year 2014 Table size 700 x 1500 mm Maximum longitudinal travel 1650 mm Maximum cross travel 760 mm Maximum distance table surface to spindle centre 600 mm Table speed 5 – 25 m/min Magnetic chuck size 700 x 1500 mm Spindle speed 1450 rpm Spindle motor 7.5 kW (10 HP) Grinding wheel size 355 x 40 x 127 mm Floor space required 4810 x 2550 mm Weight 7800 kg Supplied with: Nwsdpfx Afezuxt Aowok Automatic Downfeed System, 1500 x 700 mm Electromagnetic Chuck, Demagnetising Unit, 2 Axis Digital Readout, Remote Handwheel, Spindle Motor Speed Inverter Control, Automatic Paper Strip Filter & Magnetic Separator, Machine Pads & Levelling Bolts, Low Voltage Work Light. For sale with Jet Machinery Ltd Jet Machinery Stock No: #27039 Machine Serial Number: 1485022 Cost: £49,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Heidelberg Stahl Stahlfolder TH 94 4/4 Bag-Folding Machine Line (Lot Nr. 106 & 108) Online auction of high-quality printing, finishing, bookbinding, and paper-processing machinery from a modern graphic arts production environment, including a HEIDELBERG Varimatrix 105 CS automatic die-cutting and embossing machine, a HEIDELBERG Speedmaster SM 52-5 Anicolor 5-color offset press, a BOBST BRAUSSE Bora 1050 E die-cutting machine with stripping function, 2 HEIDELBERG Stitchmaster ST450 professional brochure production lines, a HORIZON StitchLiner 6000 fully automatic saddle-stitching line, HEIDELBERG Stahl TH 66 / TH 82 and XT 94 folding machines, a MÜLLER MARTINI Bolero automated high-speed line for collating and perfect binding with PUR and hot melt, POLAR 137 XT PACE and POLAR 137 XT AT XT Plus Autotrim fully automatic cutting lines, POLAR 115 XT and 92 ED cutting machines, AGFA Avalon CTP plate setters, MÜLLER MARTINI 1571 automated collator, PALAMIDES Delta 703 bundling and strapping machines, NEOPOST DS600i inserter, the EPSON Super Color T5200 large-format printer, the TECNOMAC Evolution 76 B1 laminator, the HEIDELBERG GTO 52 with Alcolor, various HEIDELBERG sheetfed presses, stack lifts, accessories, and graphic peripherals, etc. The online auction opens Friday 14 August and closes Thursday 17 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing days are on: - Thursday 3 September - Thursday 10 September - Monday 14 September Njdpjzuw Hhefx Afwewk Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom Nwedpfx Aszuyp Esfwek - Joint milling unit - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm - Edge profiles Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Copy milling unit SKF-L - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm

Condition: used, mileage: 104,844 km, power: 105 kW (142.76 HP), first registration: 12/2020, fuel type: diesel, empty load weight: 2,189 kg, maximum load weight: 811 kg, overall weight: 3,000 kg, wheelbase: 3,924 mm, next inspection (TÜV): 08/2028, fuel: diesel, energy efficiency: D, CO₂ emissions: 222 g/km, fuel consumption (urban): 9.2 l/100km, fuel consumption (extra-urban): 7.9 l/100km, fuel consumption (combined): 8.4 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, number of seats: 2, loading space volume: 10 m³, loading space length: 3,272 mm, loading space width: 1,787 mm, loading space height: 1,599 mm, Year of construction: 2020, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), power assisted steering, second-hand vehicle warranty, sliding door, soot filter, Exterior * Heated and electrically adjustable exterior mirrors * Washable interior lining for the cargo area up to roof height Nwsdpfxjzk Edte Afwsk * Grab handle at the entrance of the cargo area sliding door on the partition * Sliding door on the right * All-season tires * Spare tire Interior * Outside temperature display * Comfortable driver's seat * Comfortable passenger seat * Full-height partition Safety * Adaptive brake light * Driver airbag Comfort and Environment * ECO start-stop function * Headlight assistant * Gear shift indicator * Crosswind assist * Mercedes-Benz emergency call system Multimedia * Digital radio (DAB) with Bluetooth hands-free system Condition/Documents * COC papers Other * 6-speed manual transmission * Rear door step * Tire size 225/65 R16 C * Cup holders in the front * Third brake light * Emission class Euro 6d-TEMP * Seatbelt warning system for driver's seat * Semi-automatic TEMPMATIC climate control system * Wooden floor * Communication module (LTE) for digital services * MB audio system * Engine OM 651 DE 22 LA 105 kW (143 hp) 3800/min * Wheelbase 3924 mm * Signs / printed materials in German * Side marker lights * Driver's seat occupancy detection * Jump start terminal * Fabric Maturin black * First aid kit * Fleece battery 12 V 92 Ah * Jack * Warning triangle * Vehicle registration certificate, Part II Other: * Nationwide delivery for €399 net plus VAT (€474.81 incl. VAT). * For all vans: On request, 12 or 24 months of Mercedes-Benz used car warranty can be provided. * We will gladly take back your current vehicle, offset it against the new vehicle, or pay you the purchase price. * Leasing / Financing via Mercedes-Benz Bank. We will be happy to prepare an offer for you. * No liability for printing and typographical errors * Subject to change and prior sale *

Condition: used, mileage: 76,700 km, power: 110 kW (149.56 HP), first registration: 01/2024, fuel type: diesel, empty load weight: 2,291 kg, maximum load weight: 1,209 kg, overall weight: 3,500 kg, wheelbase: 3,665 mm, next inspection (TÜV): 08/2028, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 9 m³, loading space length: 3,272 mm, loading space width: 1,787 mm, loading space height: 1,519 mm, Year of construction: 2023, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, navigation system, parking sensors, power assisted steering, seat heater, second-hand vehicle warranty, sliding door, soot filter, Exterior * Electrically foldable exterior mirrors * Heated and electrically adjustable exterior mirrors * Washable interior lining for the cargo area up to the roof height * Grab handle for entering the cargo area sliding door on the partition * Sliding door, right * Halogen fog lights * Wheelbase 3665 mm * Mounting rails for roof carriers * Spare wheel Interior * Outside temperature display * Comfort headrest for driver * Double passenger seat * Armrest for driver's seat * Comfort driver's seat * Lumbar support for driver's seat * Full partition * Ceiling light(s) for cargo/passenger compartment with door contact Safety * Adaptive brake light * Driver airbag * Front passenger airbag Comfort and Environment * Rear doors, two-wing, opening to the side * Attention Assist * Hill-start assist * ECO start-stop function * Headlight assistant * High beam assistant * Gearshift indicator * Crosswind assist * Blind spot assistant * Electric auxiliary heater * Mercedes-Benz emergency call system * Multifunction steering wheel * Cruise control * Rain sensor Multimedia * Live Traffic Information * Digital radio (DAB) with Bluetooth hands-free system Condition/Documents * COC papers Nwodpozk Edysfx Afwjk Other * 3.5-ton vehicle * 6-speed manual transmission ECO Gear * Storage compartment above the windshield * Storage compartment under the dashboard * Towing eye, rear * Active lane keeping assist * Acoustic package * Trailer load up to 3,500 kg possible * Armrest, driver and passenger doors * Rear door step * Exit lights * Digital operating manual * Digital extra: 3 years of free map updates * Digital extra: Hard disk navigation * Digital extra: Remote Services Plus * Third brake light * ECE version * Entry handle on the rear right B-pillar * Emissions class Euro 6d * Vehicle HVO capable * Fuel misfill protection * Generator 14 V / 250 A * Seatbelt warning for front passenger * Seatbelt warning for driver's seat * Semi-automatic controlled TEMPMATIC climate control system * Hydraulic jack * Folding cover for storage compartment * Terminal strip for electrical connection * Comfort roof control panel * Communication module (LTE) for digital services * Charging package for instrument panel * Steering wheel adjustable in inclination and height * MBUX multimedia system with 7-inch touchscreen * Multi-button remote control * OM 654 DE 20 LA 110 kW (150 hp) 3800/min * Parking Assist Package * Parking package with reversing camera * Labels/printed matter in German * Rear mud flaps * Front mud flaps * Side marker lights * Seat occupancy recognition for driver's seat * Seat heating for driver * Jump start terminals * Fabric Maturin black * First-aid kit * Fleece battery 12 V 92 Ah * Front axle with increased load capacity * Warning triangle * Wet wiper system Other: * Nationwide delivery for €399 net plus VAT (€474.81 incl. VAT). * For all vans: Upon request, 12 or 24 months of Mercedes-Benz used car warranty is possible. * We will gladly take back your current vehicle, offset it against the new vehicle or pay you the purchase price. * Leasing/financing via Mercedes-Benz Bank. We will be happy to prepare an offer for you. * No liability for printing and typographical errors * Errors and prior sale excepted

Condition: used, mileage: 41,649 km, power: 125 kW (169.95 HP), first registration: 03/2025, fuel type: diesel, empty load weight: 2,285 kg, maximum load weight: 1,215 kg, overall weight: 3,500 kg, wheelbase: 4,325 mm, next inspection (TÜV): 08/2028, fuel: diesel, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, number of seats: 3, loading space volume: 14 m³, loading space length: 4,307 mm, loading space width: 1,787 mm, loading space height: 1,899 mm, Year of construction: 2025, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), navigation system, onboard computer, parking sensors, power assisted steering, seat heater, second-hand vehicle warranty, sliding door, soot filter, Exterior * Electrically foldable exterior mirrors * Heated and electrically adjustable exterior mirrors * Grab handle for entry into the cargo area sliding door on the partition * Sliding door, right * High roof * All-season tires Interior * Outside temperature display * Comfort headrest for driver * Double passenger seat * Comfort driver's seat * Continuous partition * Dome light(s) in the cargo/passenger compartment with door contact switch Safety * Adaptive brake light * Driver airbag * Passenger airbag Comfort and Environment * Rear doors, two-wing, opening up to the side panel * Attention Assist * Hill-start assist * ECO Start-Stop function * Headlight assist * Crosswind assist * Blind Spot Assist * Traffic Sign Assist * Rear warning system Nwsdezk Efkepfx Afwjk * Auxiliary electric heater * Mercedes-Benz emergency call system * Leather steering wheel * Multifunction steering wheel * Cruise control * Rain sensor Multimedia * Live Traffic Information * Navigation * Instrument cluster with color display * Digital radio (DAB) with Bluetooth hands-free system Equipment lines and packages * Winter package Condition/Documents * COC papers Other * 3.5-ton vehicle * 9G-TRONIC automatic transmission * Cornering Assist * Storage compartment above the windshield * Storage compartment under the dashboard * Towing eye, rear * Active Brake Assist * Active Lane Keeping Assist * Acoustic package * Trailer load up to 3,500 kg possible * Step at the rear door * Exit lights * Cup holder, front * Digital operating manual * Digital extra: Remote Services Plus * Third brake light * Anti-theft and intrusion alarm system * Entry handle on the rear left corner pillar * Entry handle on the rear right corner pillar * Electric parking brake * Electrical system for trailer socket * Emission class Euro 6 * Vehicle compatible with HVO fuel * Mis-fuelling prevention * Generator 14 V / 250 A * Seatbelt warning for passenger * Seatbelt warning for driver's seat * Semi-automatic TEMPMATIC climate control * Grab handles for entry for driver and passenger * Main tank 93 liters * HOLD function * Wooden floor * Interior paneling, cargo area up to roof height (wood) * Intelligent Speed Assist (ISA) * Clothes hook in the cab * Comfort roof control panel * Communication module (LTE) for digital services * Charging package, dashboard * Cargo area package 2 * Cargo area lighting via motion sensor * Load securing rail system * LED light strip in the cargo area * Steering wheel adjustable for inclination and height * MBUX multimedia system * OM 654 DE 20 LA 125 kW (170 hp) 3800/min * Parking package with reversing camera * Premium complete wheel protection (3 years) * Wheel arches can be loaded * Wheelbase 4325 mm, short overhang * Signs / printed materials in German Other: * Nationwide delivery for 399 € net plus VAT (474.81 € incl. VAT) * For all vans: Optional 12 or 24 months Mercedes-Benz used car warranty. * We will gladly take your current vehicle in part exchange, offset it against the new vehicle or pay you the purchase price. * Leasing / financing via Mercedes-Benz Bank. We will gladly prepare an offer for you. * Ex-rental vehicle * No liability for printing and typographical errors * Subject to errors and prior sale.

Condition: used, mileage: 41,649 km, power: 125 kW (169.95 HP), first registration: 03/2025, fuel type: diesel, empty load weight: 2,285 kg, maximum load weight: 1,215 kg, overall weight: 3,500 kg, wheelbase: 4,325 mm, next inspection (TÜV): 08/2028, fuel: diesel, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, number of seats: 3, loading space volume: 14 m³, loading space length: 4,307 mm, loading space width: 1,787 mm, loading space height: 1,899 mm, Year of construction: 2025, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), navigation system, onboard computer, parking sensors, power assisted steering, seat heater, second-hand vehicle warranty, sliding door, soot filter, Exterior * Electrically retractable exterior mirrors * Heated and electrically adjustable exterior mirrors * Grab handle at the entrance to the cargo area sliding door on the partition * Sliding door, right * High roof * All-season tires Interior * Outside temperature display * Comfort headrest for driver * Double passenger seat * Comfort driver's seat * Full partition * Interior light(s) in the cargo/passenger compartment with door contact switch Safety * Adaptive brake light Nwsdozk Efqspfx Afwsk * Airbag for driver * Airbag for passenger Comfort and Environment * Rear doors, two-wing, opening to the side * Attention Assist * Hill-start assist * ECO start-stop function * Headlight assistant * Crosswind assist * Blind Spot Assist * Traffic sign assist * Reversing warning * Electric auxiliary heating * Mercedes-Benz emergency call system * Leather steering wheel * Multifunction steering wheel * Cruise control * Rain sensor Multimedia * Live Traffic Information * Navigation * Instrument cluster with color display * Digital radio (DAB) with Bluetooth hands-free system Equipment lines and packages * Winter package Condition/Documents * COC papers Other * 3.5-ton vehicle * 9G-TRONIC automatic transmission * Turning assistant * Storage compartment above the windshield * Storage compartment under the cockpit * Towing eye, rear * Active Brake Assist * Active Lane Keeping Assist * Acoustic package * Trailer load up to 3,500 kg possible * Step at the rear door * Courtesy lights * Cup holders, front * Digital operating manual * Digital extra: Remote Services Plus * Third brake light * Anti-theft and burglary alarm system * Grab handle on the B-pillar, rear left * Grab handle on the B-pillar, rear right * Electric parking brake * Electrical system for trailer socket * Emission class Euro 6 * Vehicle HVO compatible * Mis-fueling protection * Generator 14 V / 250 A * Seatbelt warning for passenger * Seatbelt warning for driver * Semi-automatic TEMPMATIC climate control system * Grab handles for driver and passenger entry * Main tank 93 liters * HOLD function * Wooden floor * Interior paneling in the cargo area up to roof height (wood) * Intelligent Speed Assistant (ISA) * Clothes hook in the cab * Comfort roof control unit * Communication module (LTE) for digital services * Charging package instrument panel * Cargo area package 2 * Cargo area lighting via motion sensor * Load securing rail system * LED light strip in the cargo area * Steering wheel adjustable in inclination and height * MBUX multimedia system * OM 654 DE 20 LA 125 kW (170 hp) 3800/min * Parking package with reversing camera * Premium complete wheel protection (3 years) * Wheel arches can be loaded * Wheelbase 4325 mm, short overhang * Signs / Printed materials in German Other: * Nationwide delivery for €399 net plus VAT (€474.81 incl. VAT). * For all vans: 12 or 24 months Mercedes-Benz used car warranty available on request. * We will gladly take back your current vehicle, offset it against the new vehicle or pay you the purchase price. * Leasing / financing via Mercedes-Benz Bank. We will be happy to provide you with an offer. * Ex-rental vehicle * No liability for printing and typographical errors * Subject to errors and prior sale

Condition: used, Year of construction: 1998, functionality: fully functional, Machine Type: Automatic hot foil stamping and die-cutting machine Year: 1998 Manufacturer: Yawa Maximum Sheet Size: 780 mm x 540 mm Maximum Die-Cutting Pressure: 120 tons (or 144 Tn) Processing Speed: Up to 5,500 sheets per hour Hot Foil Stamping Features: 6-zone heating system Can process both longitudinal and transverse foils Material Thickness: From 90 to 600 gsm Other Features: Front and side lays Nedexg Hzfspfx Afwswk Non-stop feeder and delivery options Includes chases for both die-cutting and stamping

Condition: good (used), Year of construction: 2007, operating hours: 10,490 h, functionality: fully functional, Channel baling press Presto HPK 20/50 S, year of manufacture 2007 Manufacturer: Presto Type: HPK 20/50 S Year of manufacture: 2007 Nwjdszvbbrspfx Afwsk Operating hours: 10,490 (as of 08/2026) Drive: 22 kW Pressing force: 50 t Feed opening: 1200 x 700 mm (L x W) Channel cross-section: 700 x 750 mm Feed volume, max. 0.63 m³ Cycle time: 23 s Tying: 3-fold, automatic Throughput capacity at 35 kg/cbm: 2.9 t/h 60 kg/cbm: 4.3 t/h 100 kg/cbm: 6.3 t/h Bale weight: up to 450 kg Machine dimensions: 760 x 1350 x 2350 mm (L x W x H) Machine weight: approx. 7,500 kg Materials: paper, cardboard, film Note: The press is in good condition and is currently still in operation. An inspection is possible by appointment. The machine will be available from the end of 2026. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. The sale is made against prepayment, ex works, without warranty.

Condition: used, Year of construction: 2018, operating hours: 6,765 h, functionality: fully functional, HSM VK 4812P channel baling press, year of manufacture 2018 Manufacturer: HSM Type: VK 4812P Year of manufacture: 2018 Operating hours: 6765 Pressing force: 48 t Drive power: 15 kW Total power: 18 kW Feed opening: 1020 x 1250 mm (W x L) Njdpfx Afszwnclowjwk Capacity: 50 kg/m³: 7.5 t/h Bale size: 1,100 x 750 x 600-1200 mm Bale weight: 300-550 kg Tying: 4-fold, automatic Transport dimensions: approx. 7,530 x 2,400 x 2,400 mm (L x W x H) Weight: approx. 10,000 kg Materials: PET bottles, cardboard, paper, film Note: The press has been inspected and tested by us. A video can be found on our website or YouTube channel. An operating manual and EC declaration of conformity are available in German. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is ex works, without warranty. Our payment terms are 100% prepayment.

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, W&H Triumph 1 3 layers Photocell for preprinted reels Nedpfx Asw Nvi Sjfwowk

Condition: excellent (used), Year of construction: 2015, operating hours: 14,900 h, functionality: fully functional, overall weight: 33,000 kg, power: 264 kW (358.94 HP), rotational speed (min.): 70 rpm, input voltage: 400 V, Slow-running, robust single-shaft shredder suitable for pre-shredding a wide variety of materials without solid contaminants. Application: Shredding of industrial and commercial waste, foils, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, and mixed plastics for thermal and recycling purposes, loose or baled. Lindner Jupiter 2200 Drive power: 2 x 132 kW (ABB motors) Screen perforation: According to customer requirements. mm Control cabinet: complete with (FU-ABB) Working opening: 2135 x 1750 mm Filling volume: approx. 5.5 m3 Rotor length: 2200 mm Nwsdpfx Aov S Hyvefwek Rotor flight circle: 745 mm Rotor speed: 50 Hz: 87 rpm Number of rotor blades: 84 Blade shape: 172 x 57 x 28 mm Lower anvil blades: 6 Upper scraper combs: 6 Hydraulic feed: 11 kW Total weight: approx. 33 t Dimensions LxWxH mm: 5500 x 3050 x 3100 mm, with hopper H = 4880 mm Delivery time: immediately Two discharge belts available as an option.

Condition: used, mileage: 138,800 km, power: 92 kW (125.09 HP), color: white, driver cabin: day cab, gearing type: mechanical, Year of construction: 2016, Equipment: ABS, central locking, power assisted steering, - Aerial Work Platform: France Elevateur 121FT, 1 person / max. 120 kg, working height approx. 12 m, operation possible from the basket and via remote control, 941 operating hours. Airbag: driver's side, ABS with electronic brakeforce distribution (EBV) and brake assist, ESP with traction control (ASR), outside temperature display, heat-insulating glazing, tachometer, electric front windows, height-adjustable headrests (3), electrically adjustable and heated exterior mirrors, transmission: 6-speed manual gearbox, power steering, two 12 V sockets at the front, 180 A alternator, mini wheel covers, wheels: 16" steel rims, storage compartments in the front doors, overhead shelf above windscreen, ashtray & cigarette lighter, 3-point seatbelt system for all seats, cup holder, lockable glove compartment, height-adjustable steering wheel, pollen filter, upholstery: fabric, height-adjustable driver's seat, solid paint, self-cleaning diesel particulate filter, gear shift indicator, electronic immobilizer, central locking with radio remote control, seats: double passenger bench, tool storage shelving installed. We would be happy to make you an offer for the trade-in of your used vehicle. If you are interested in leasing or financing, we will gladly prepare an individual offer for you. Errors and prior sale excepted. Mr. Rudolph and Mr. Seidel will be happy to assist you by phone at: . - ESP, particulate filter, partition wall, rental possible Nwjdpfx Afsyfpwujwjk Cab: Local transport = Further information = Engine displacement: 2,299 cc Gross Vehicle Weight (GVW): 3,500 kg Please contact Tobias Ebert for more information.

Condition: new, mileage: 10 km, power: 103 kW (140.04 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 3, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Your direct contact: Andreas Kawa, Head of Sales, Commercial Vehicles – Phone: | Email: Special equipment: Blind Spot Assist + Cross Traffic Detection Trailer coupling (non-removable) DAB antenna integrated into the exterior mirror Nsdpezvl Ipofx Afwswk Stellantis CustomFit CenterCARGO PROTECTION PACKAGE Trim Package MAX Full LED headlights All-weather tires Digital rearview mirror Adaptive cruise control (>30 km/h) Suspended driver's seat (suspension seat) Steering wheel with partial leather covering Additional equipment: Airbag, passenger side, Airbag, driver side, Exterior mirrors, standard, up to vehicle width 2200 mm, Battery 95 Ah, Parking assist system, rear, acoustic, Trailer stabilization program, Driver assistance system: Post-collision system, Driver assistance system: Rollover protection system, Driver assistance system: Adaptive Load Control (LAC), Traction control system (ASR), Generator 180 A, Cup holders in front and storage compartment, Urea tank (AdBlue): 19 L, Rear wing doors without glazing, Body/superstructure: High-roof box van, standard, Fuel tank: 90 L, Radiator grille frame in vehicle color, Load compartment partition, Model update, Engine 2.2 L - 103 kW Diesel FAP CAT, Wheelbase 4035 mm, Tire repair kit, Low emissions according to emission standard Euro 6e, Sliding door, loading/passenger compartment, right, Safety package, Black box (Event Data Recorder, EDR), Seat cover/upholstery: Fabric, Seats in the driver's cab: Double passenger seat (including automatic seat belt), Seats in the driver's cab: Driver's seat, height-adjustable, Seats in the driver's cab: Driver's seat with lumbar support, Start/stop system, Solid color, ice white, Lashing eyes, load compartment, Warning system for seat belts in front, Permissible total weight 3.50 t Errors, changes, and sales subject to prior notice. The information on the equipment provided in this advertisement does not constitute a guaranteed feature in the legal sense and serves solely for general information. Binding equipment features are exclusively subject to the purchase contract. Example photos!