Used Paper Cup for sale (3,746)

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: Ndsdpezp H R Eofx Afwja New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: excellent (used), Year of construction: 2011, operating hours: 2,450 h, travel distance X-axis: 6,000 mm, travel distance Y-axis: 12,001,400 mm, travel distance Z-axis: 18,001,790 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 3,000 kg, total height: 4,700 mm, total length: 12,700 mm, total width: 7,800 mm, rotary table diameter: 2,200 mm, rotational speed (max.): 200 rpm, overall weight: 57,000 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 2,450 h, coolant supply: 40 bar, number of slots in tool magazine: 60, tool length: 460 mm, Equipment: chip conveyor, documentation/manual, CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 6000 Y-axis travel mm: 1200/1400 Z-axis travel mm: 1800 (H) / 1790 (V) C-axis degrees: 360º (0,001) A-axis degrees: ±180° B-axis degrees: ±180° Rapid traverse m/min: 30 Worktable Table dimensions mm: 6000x1235 Milling/turning table nc: Table dimensions mm: Ø2200 Max. workpiece weight kg: 3000 Table rotation speed rpm: 200 max. torque Nm: 4600 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 33/24 (40%ED/cont) Spindle torque Nm: 382/278 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 With free neighboring places mm: 200 With occupied neighboring places mm: 104 Max. Tool Length mm: 460 Max tool weight kg: 25 Chip-to-chip time s: 9.8 Equipment Electronic Handwheel Chip conveyor Nedpfezb H Tfox Afweda Infrared probe Internal cooling lubricant supply Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Workarea light DXF import function Paper band filter Automatic door Indexing Head Set Up for Shaft Machining Axles can be hydraulically locked using the M function Machine running times Under power: 29447 Spindle Working: 2450 Basic machine dimensions / weight Length mm: 12700 Width mm: 7800 Height mm: 4700 Weight kg: 57000

Condition: excellent (used), Year of construction: 1994, Hang Paper Drill 107-20 electronic Automatic multi-spindle paper drill with 4 drill heads - Various drill diameters - Depth and side stops - Automatic belt tensioning - Quick adjustment of drill heads EXTRAS: Continuously adjustable spindle drive 100-1600 rpm for processing mixed papers! Very good condition Nodpfx Afjt E S R Neweda Price plus VAT EXW. All information is subject to change without notice. Subject to prior sale. Dealership. This sale is made without any warranty.

Condition: used, Year of construction: 2020, Digital UV Coating and Finishing System MGI JETvarnish 3D Evo 75 Maximum sheet size: 1,200 × 750 mm Ndsdpfx Afszqyrrowja Processable material: 135–800 g/m² Coating unit: 135–400 g/m² Suitable for coated and uncoated papers and cardboard, pre-coated as well as laminated/cashed substrates, and suitable plastic media. Coating: Varnish High-Gloss clear coat 18-liter tank Coating layer thickness: 7–232 µm Digital UV coating finishing, partial and full-area coating, as well as 3D/relief coating effects. Machine is operational and available for immediate delivery. Location: Western Europe Price on request.

Condition: like new (used), Year of construction: 2021, machine/vehicle number: see PDF files, FANUC CRX-10iA/L collaborative robot (cobot) – 10 kg / 1418 mm – 05/2021 – first owner, very low use – incl. vacuum gripper + CE base Description: For sale: FANUC CRX-10iA/L collaborative robot (cobot), build date 05/2021, payload 10 kg and reach 1418 mm. From first owner and hardly used. The robot was purchased for a specific application/project, but the concept did not work as intended; therefore the installation was taken out of service and stored in 2021/2022. Including vacuum gripper beam with multiple suction cups as pictured, mounted on a CE-marked base built by Machinefabriek van de Weert (Helmond, NL). Robot specifications: * Make / model: FANUC CRX-10iA/L * Build date: 05/2021 * Payload: 10 kg * Reach: 1418 mm * Robot weight: 40 kg * Type / part no.: A05B-1702-B202 * Serial no.: R2150086C * Software: standard/basic configuration (no upgrades known) Base / installation (integrator): * Built by: Machinefabriek van de Weert – Helmond b.v. (CE) * Year of building: 2021 Njdpfjzq Tzasx Afwoda * Power supply: 230V / 50Hz * Compressed air: 6 bar * Base weight: approx. 150 kg Included: * FANUC CRX-10iA/L robot on base * Vacuum gripper / suction cup beam (as shown) * Cabling / pneumatics as installed * Control/electrics integrated in the system / complete as installed Condition: * Very low use, stored since 2021/2022 * Cosmetic dust/storage marks visible (see photos) * Inspection possible at our warehouse Location & delivery: * Location: Son (near Eindhoven), The Netherlands * Loading available Fixed quick-sale price: € 27,500.- excl. VAT, ex works Son (NL) Contact: Walther van Rooij – Machinehandel van Rooij BV (The Netherlands) Mobile/WhatsApp: E-mail:

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 5 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, power: 36 kW (48.95 HP), fork carriage width: 1,470 mm, fork length: 1,200 mm, empty load weight: 4,350 kg, total length: 3,084 mm, drive type: Diesel, construction width: 1,350 mm, Rough-terrain forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Hydrostatic Speed class: 20 Condition: New Technical condition: very good Front tire type: Pneumatic Front tire size: 300-15 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 7.00-12 Rear tire condition: 80 - 100% Description: The MSI 25 is a versatile mast forklift and unique in its kind. It can be used in the wood and paper industry, in the recycling sector, in logistics applications, etc. Whether in an industrial building, in the yard, or on light terrain, the hydrostatic transmission, in combination with the powerful engine and two drive wheels with a large diameter, enables precise and smooth operation. This machine ensures daily productivity gains. For efficient maneuvering, the MSI 30 has a steering axle with an integrated cylinder, which gives it a very small turning radius. Thanks to the numerous available attachments, the MSI 30 is extremely versatile and suitable for lifting, loading, unloading, and storing long loads. It has a lifting capacity of 3.0 t. Side shifter, 3rd valve, half cabin, full free lift, CE certificate. Ndedpfozgpawjx Afwoa

Condition: good (used), Year of construction: 1999, functionality: fully functional, 11 cup wheels vertical glass edging machine min. glass height : 50 mm glass thikness : 3 - 30 mm machine dimensions : L x W x H : 8,1 x 1,2 x 2,3 m power : 23,8 Kw weight : 4150 kg reconditioned machine from year 2018 We look for export outside the EU . low price . Ndodjztatuspfx Afwja

Condition: excellent (used), Year of construction: 2017, operating hours: 86 h, functionality: fully functional, machine/vehicle number: 5180, Size 63 x 92 cm, V-type feeder, Suction tape feeder board, Preset sidelay, Paper size preset, Ryobi fully automatic plate changers, Plate register remote control, Ryobi PCS-G printing control, PDS-E spectrojet, Ryobi D-matic alcohol dampening system, Ink roller temperature control, Automatic blanket wash, Automatic roller wash. Nedpfxowzvzme Afwjda

Condition: new, machine/vehicle number: ZBP 30, The AMIS briquetting press type ZBP 30 produces 30 mm briquettes. These briquettes are ideal for combustion in wood gasifiers and smaller wood chip boilers or heating systems. Any material from a woodworking operation (shavings, dust, etc.) can be briquetted. Ndodpfoyr I Hnsx Afwea Wood chips, sawdust, wood shavings, etc., are generated in all craft and industrial woodworking companies. These materials incur significant storage and transport costs on a daily basis. Briquetting presses offer an ideal solution by compressing the material into briquettes, which are simple and space-saving to store and transport. Furthermore, the risk of spontaneous combustion is significantly reduced. The briquetting presses require little space, feature sturdy construction, and are equipped with low-maintenance technology. Whether it is wood, paper, biomass, foam, or polystyrene, the ZBP can briquette all suitable materials. With a throughput of up to 35 – 130 kg/h, they are especially suited for small and medium-sized enterprises.

Condition: new, machine/vehicle number: AMIS Brikettierpressen Typ ZBP 50, 60 und 70, AT A GLANCE: Variable container dimensions (customizable to customer requirements) Nsdpfeyr I Husx Afwjda Left- or right-hand configuration Hydraulics with separate oil tank All model series also available as “DUO” variants Wood chips, sawdust, wood shavings, etc. are generated in all woodworking and industrial processing businesses. Every day, storage and transport costs for these materials are significant. Briquetting presses offer the ideal solution, as briquettes are easy and space-saving to store and transport. Additionally, the risk of spontaneous combustion is significantly reduced. Briquetting presses require little space, are robustly constructed, and equipped with low-maintenance technology. Whether wood, paper, biomass, foam, or polystyrene – the ZBP series briquettes any suitable material. With a throughput capacity of up to 35 – 130 kg/h, they are particularly suitable for small and medium-sized enterprises. Flexible installation options thanks to the availability of left- and right-hand designs. So start briquetting today!

Condition: like new (used), Year of construction: 2026, Demonstration machine with approximately 9 operating hours Another machine, available immediately (ex works Neckartailfingen) *Options available at an extra charge - see below Included: + Profile rotor for higher throughput We would be happy to provide a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via a freight forwarder, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3-phase Knives: 15 pieces, reversible Option: double knife row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Hopper volume: approx. 0.6 m³ Hydraulically actuated slide Screen mesh size as desired (10 - 40 mm) Suction nozzle Ø 160 mm Weight: approx. 1,300 kg Dimensions (L x W x H): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% (dry basis) . Standard included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 RPM for high throughput - Cycle control to avoid idle times - Performance-enhancing stepped control of the hydraulic slide - Pertinax guides for hydraulic slide - Vibration-damping machine feet - CE compliant . Nodpfx Afjb Ny Eyowjda Optional shredder features at an extra charge: - Raise the shredder by 30 cm (preparation for a conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for more than 20% hardwood) - Double knife row + €995 net - Special scraper + €990 net (recommended when shredding veneer or paper, or items with a material thickness of less than 3 mm) - Articulating conveyor belt + €8,770 net Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm - Automatic overband magnet + €5,980 net Alternatively, a fixed magnet block above the conveyor belt for regular manual removal + €990 net (in case of low metal content) - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) alternatively, manual start and stop of the belts + €595 net . Requirements for the raw material: - The moisture content (dry basis) must be below 30% - Installation temperature: temperature-controlled room at a minimum of +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: new, mileage: 490 km, power: 100 kW (135.96 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 2 m³, loading space length: 3,500 mm, loading space width: 2,030 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Model Year * Model Year: 2024 Transmission * Manual gearbox, 6-speed Assistance systems * Cruise control * Rear parking assist * Driver fatigue detection Lighting and Visibility * Headlight range adjustment * Rain sensor * Tinted windows * Daytime running lights * Light sensor Audio & Communication * Radio * Digital radio reception (DAB) * AUX & USB ports * Bluetooth hands-free system * Smartphone app integration Exterior * Leaf spring suspension * Drive: Rear-wheel drive * Tow bar, ball type * Electrically adjustable and heated exterior mirrors * All-season tires * Tool box: Right side * Connector plug 1x13 pin: pre-wiring * Drop sides, foldable Safety * Driver and passenger airbags * Electronic Stability Program (ESP) * Anti-slip regulation (ASR) * Anti-lock Braking System (ABS) * Tire pressure monitoring * Immobilizer * Rotating beacon: 1x on tripod * Emergency brake assist Interior * Cloth seats * Multifunction steering wheel * On-board computer * Rubber flooring Comfort * Air conditioning * Height-adjustable driver seat * Driver armrest * Dual passenger bench seat * Power steering * Adjustable steering column * Power windows * Central locking with remote control * Cup holder Cargo area * Length: 3,500 mm, Width: 2,030 mm, Height: 400 mm * Volume: 2 m³ Other Dimensions and Weights * Permissible total weight: 3,500 kg * Gross train weight: 7,000 kg Njdpey Nu E Hsfx Afwsda * Wheelbase: 3,450 mm ----- Including red/white warning markings according to DIN - Promotional price - New vehicle / New MY24 model - 3-year manufacturer warranty up to 75,000 km - Detailed offer available upon request - Financing / hire purchase / leasing possible on request at top conditions - WRV / maintenance contracts available individually for a surcharge. - Rear view camera available at an additional net cost of €880.00 + VAT - Delivery available for a surcharge - Subject to prior sale - Your contacts: - Mr. Axel Scheske, Tel. Mr. Luca Netter, Tel.

Condition: excellent (used), mileage: 579,675 km, power: 265 kW (360.30 HP), first registration: 07/2015, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, Year of construction: 2015, Equipment: differential lock, Tractor Ndjdszl Tn Nopfx Afwoa MAN TGX 18.360 First commissioning: 20.07.2015 Read speedometer reading: 579,675 km Automatic gearbox: 12 gears Emission class: 6 Unladen weight: 7320 kg Wheelbase: 3.6 meters Tires on the first axle: +/- 50 Tires on the second axle: +/- 80 Brake lining on first axle: 99 - 98 % Brake pad on second axle: 44 - 42 % Adaptive cruise control Automatic air conditioning On-board computer Central locking Differentiated locking system Electric windows and mirrors GPS Orthopaedic seats Seat heating .... Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, number of axes: 3, This 3-axis IMA BIMA 410 CNC Wood Machining Centre was manufactured in 2000. It features a working area of 3000 mm in X and 1200 mm in Y, with a maximum clamping height of 100 mm. The machine is equipped with an automatic central lubrication system and AC servo motors for precise operation. If you are looking to get high-quality wood machining capabilities, consider the IMA BIMA 410 machine we have for sale. Contact us for further details. • Working area X: 3000 mm • Working area Y: 1200 mm • Max. clamping height Z1: 100 mm • Max. workpiece thickness Z2: depending on equipment/application • Table height: approx. 1000 mm • Pendulum operation X: 2 × 1400 mm • Free space center X: 200 mm • Pendulum operation alternative X: 2 × 900 mm • Free space center alternative X: 1200 mm • Machine weight: approx. 6000 kg Nsdpfxszug Afj Afwsda • Guide system: precision linear guides hardened approx. 62 HRC • Central lubrication: automatic for all main axes and ball screw • Drive system: AC servo motors with encoder • X/Y drive: rack and pinion • Z drive: ball screw • Feed rate: 40 m/min • Rapid traverse X/Y: 80 m/min • Rapid traverse Z: 25 m/min • Acceleration: 3 m/s² • Extraction connection main spindle: 300 mm • Extraction connection drilling spindles: 120 mm • Air speed: approx. 28 m/s • Air volume: approx. 7080 m³/h • Vacuum pump capacity: 100 m³/h • Compressed air connection: 1/2" • Air pressure: 6 bar • Control voltage: 24 V DC • Connected load: approx. 24 kVA • Power supply: 3/N/PE 400/230 V 50 Hz • Frequency converter: 0–480 Hz • Ambient temperature: +15 to +35 °C • Control system: IMATRONIC NT 231 • Interpolation: linear all axes, circular 2.5D • Resolution: 0.001 mm • Spindle: HSK F63 • Tool clamping force: 11000 N • Max tool weight: 6 kg • Speed range: 1500–18000 rpm • Spindle power: 7.5 kW • Cooling: water cooled • CNC axis: 360° rotating • Tool magazine type: plate changer • Tool positions: 18 • Max tool length: 150 mm • Max tool diameter: 100 mm (150 mm with free сосед positions) • Max load: 60 kg • Saw unit motor: 1.5 kW • Saw speed: 5600 rpm • Saw blade diameter: max. 150 mm • Drilling unit: 14 spindles • Spindle stroke: 70 mm • Drive: 2.2 kW • Speed: 3150 rpm • Drill diameter max: 20 mm • Adapter head spindles: 4 • Speed max: 6000 rpm • Drill diameter max: 12 mm Table equipment: • 6 adjustable support arms • 12 suction cups 114 × 159 × 100 mm • 6 suction cups 125 × 75 × 100 mm • Vacuum system: 2-circuit clamping system • Electrical cabinet size: 2000 × 1800 × 600 mm DEFECT: • The main spindle no longer releases the interchangeable drill head

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups Ndjdjy Samuopfx Afwja - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: refurbished (used), Year of construction: 2005, operating hours: 80,000 h, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,600 mm, position of the milling head: Orthogonal, spindle speed (max.): 2,200 rpm, spindle speed (min.): 22 rpm, rotational speed (max.): 2,200 rpm, rotational speed (min.): 22 rpm, year of last overhaul: 2026, spindle motor power: 40 W, Equipment: documentation/manual, rotational speed infinitely variable, Used SHW UF 6L – Universal Milling and Drilling Center Ndedpfsztqylox Afwoa Year of manufacture: 2005 Machine no.: XXXX Partially overhauled in 2026 High-performance SHW universal milling center with a large working area, automatic universal milling head, Heidenhain iTNC 530, and extensive equipment. Technical main data Travel ranges X-axis: 8,000 mm Y-axis: 2,600 mm Z-axis: 1,600 mm Automatic universal milling head CNC-controlled, swivels in two planes Milling head mount: 360 × 1° Milling head: 180 × 1° A total of 64,800 programmable head positions Tool mount: SK 50 / DIN 69871 Hydromechanical tool clamping Oriented spindle holder 360 × 1° Main spindle Drive power: 40 kW at 100% ED Max. power: 56 kW at 40% ED 2-stage gearbox Speed range: 22–3,200 min⁻¹ Feeds X-axis: up to 20,000 mm/min Y/Z-axis: up to 24,000 mm/min Digital AC feed drives Direct linear measuring systems CNC control HEIDENHAIN iTNC 530 External electronic handwheel HR 420 Second control panel in front of the machine Equipment Electro-mechanical leveling system for the spindle stock Traveling work platform with CNC control panel Pick-up tool station for 10 tools Max. tool weight: 25 kg Max. tool length: 400 mm Wireless measuring probe, 3-dimensional 1-channel collision monitoring Internal and external coolant supply Coolant pressure up to 16 bar / approx. 32 l/min Coolant/air switching Paper band filter system Coolant tank approx. 800 l Oil cooler for the spindle stock Hinged belt chip conveyor Impulse central lubrication system Traveling control cabinet Fixtures incl. foundation anchor bolts Connection data 400 V / 3 phases / 50 Hz Connection power approx. 80 kVA Fuses 160 A Compressed air 4–6 bar Robust SHW universal milling center with an 8,000 mm X-axis travel, a powerful 40 kW main drive, and an automatic universal milling head – suitable for the flexible machining of large and complex workpieces. Accessories such as a dividing head table and rotary table available upon request. Automatic tool changer (ATC) available upon request. Images are sample images.

Condition: used, Letter Press Tiegel in good condition - DIE Cutter Heidelberg OHT in einem guten Zustand. Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1953 - Serial-No. 43717 Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Ndsdoztzp Repfx Afwoa

Condition: new, Year of construction: 2026, rotor diameter: 400 mm, number of blades: 55, rotor length: 1,200 mm, power: 55 kW (74.78 HP), rotational speed (max.): 80 rpm, Genox V1200 Series - Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 55kW Drive Motor with heavy duty oversized gearbox, 80rpm shsft speed as standard. 1200mm wide x 400mm diameter Rotor with 55pcs 40mm Concave reversible alloy steel blades. Hydraulic force feeding of material according to motor loading and timers. Ndedjztxlpjpfx Afwea Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 480 mm, rotor length: 2,000 mm, power: 150 kW (203.94 HP), rotational speed (max.): 80 rpm, Equipment: rotational speed infinitely variable, Genox BH2000 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 150kW combined motor power (110kW & 180kW options also available) with heavy duty oversized gearboxes, 80rpm shaft speed as standard. 2000mm wide x 480mm diameter Rotor with 95 pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Nedpfx Afsztxmtjwoda Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 480 mm, rotor width: 1,500 mm, power: 110 kW (149.56 HP), rotational speed (max.): 80 rpm, Genox K1500 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 110kW Drive motor (90kW & 150kW dual drive options also available) with heavy duty oversized gearbox, 80rpm shaft speed as standard. 1500mm wide x 480mm diameter Rotor with 88pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Nedpjzudh Eefx Afwsda Hydraulic, fast acting swing type ram force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 650 mm, rotor width: 2,200 mm, rotational speed (max.): 80 rpm, Genox BH2200 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 180kW combined motor power (150kW & 220kW options also available) with heavy duty oversized gearboxes, 80rpm shaft speed as standard. 2200mm wide x 650mm diameter Rotor with 95+6 pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Hydraulic force feeding of material according to motor loading and timers. Nedpfxozudi No Afwjda Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle.

Condition: excellent (used), mileage: 101,166 km, power: 309 kW (420.12 HP), first registration: 03/2020, tire condition: 50 %, axle configuration: 8x2, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2020, Equipment: air conditioning, crane, electric window regulation, power mirror, = Additional options and accessories = - Aluminum fuel tank - Cabin - Electric windows front and rear - Power take-off (PTO) - PTO - Speed limiter - Sun visor = Remarks = Superstructure Construction year: 2019 Crane Number of hydraulic extensions: 2 Remote control: ✓ Load Hook: ✓ Rotator: ✓ Clamshell bucket: ✓ Winch: ✓ In perfect condition and directly from the Belgian government! Volvo FM 420 with crane/tipper and work platform with extra crane; this is ideal for waterworks or cable layers. In addition to the options already mentioned, it features: -HMF 1320 K with remote control -5th and 6th function -pin -Rotator -tap 2 SWINGLIFT 250 with winch function, this is in the tool case -WAF kipper, tipping left and right -8x2 chassis with 3 steering axles etc etc This truck has Belgian papers and is ready for immediate use. = More information = Axle configuration Tyre profile: 50% Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels Rear axle 2: Steering Weights Empty weight: 16.095 kg Functional Crane: HMF 1320 K RADIO REMOTE!, year of manufacture 2019, on rear of chassis Make of bodywork: WAF Extendable superstructure: Yes Tipper: Left / Right Condition Technical condition: very good Visual appearance: very good Nodpfszubxbex Afwjda Financial information Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Paper roll gripper, Bolzoni Auramo model AR-25RJ-16F (1-2 roll clamp, split long arm) Ndjdpfxey Uru As Afwja Capacity: 2000 kg Load Center: 800 mm Roll Range: 700-1600 mm Height: 830 mm Weight: 760 kg Horizontal Center of Gravity: 292 mm Vertical Center of Gravity: 360 mm Effective Thickness: 190 mm Warning: Sold without a solenoid valve. All information is on the data plate. Condition: Ready for operation and fully functional. Technical condition: Very good. Available from July 15th, following the installation of the new gripper.

Condition: used, mileage: 300,000 km, power: 120 kW (163.15 HP), first registration: 11/2018, fuel type: diesel, overall weight: 3,050 kg, color: black, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle number (for inquiries): 44 Mercedes-Benz VITO MIXTO 116 LANG 7G-TRONIC 4X4 Paint code: Paint color: Arctic White MB 9147 Equipment: * A1N Rear axle shaft, NEAPCO brand * C447 - * CF0 Basic chassis * CL1 Steering wheel, adjustable for tilt and height * CL3 Leather steering wheel * CL4 Multifunction steering wheel with trip computer * E07 Hill start assist * E34 Backup battery for starting * ED4 12 V 92 Ah battery * EL9 2-way speakers, front and rear * EN7 Audio 15 * EZ5 Parking package * EZ7 Active Parking Assist * F447 - * F48 Heated windshield washer system * F61 Interior mirror * F66 Lockable glove compartment * F68 Heated and electrically adjustable exterior mirrors * FJ3 Double cup holder in the center of the cockpit * FKB Station Wagon * FR8 Rear view camera * FZ8 Comfort opening and closing with IR remote control * G42 7G-Tronic Plus * H00 Warm/cool air duct to the passenger compartment * H12 Auxiliary hot water heater / parking heater (Webasto) * H15 Heated front passenger seat * H16 Heated driver seat * H20 Heat-insulating glass all around * HH4 THERMOTRONIC automatic climate control * HI1 Climate zone 1 (cold/comfort) * HY1 Radio remote control for auxiliary hot water heater * IB6 C447 Vito/V-Class series * IG5 Basic * IK0 Complete vehicle * IL1 Domestic (Germany) * IL4 EU/EFTA region * IL5 Left-hand drive * IN2 Wheelbase 3200 mm, long overhang * J55 Seat belt reminder for front passenger seat * JA1 Windscreen washer fluid level warning light * JF1 Rain sensor * JK3 Instrument cluster with pixel matrix display * JW8 Attention Assist * JX2 Service interval 40,000 km * KB6 Main tank 57 liters * L Left-hand drive * LA2 Headlight assist * LC4 Comfort overhead control panel * LD9 Interior light(s) in the rear * LE1 Adaptive brake light * LX5 Europe * M40 Alternator 14V/200A * MA6 Emissions class Euro 6b N1 * MG3 Engine OM651 DE 22 LA 120 kW (163 hp) * MG9 Alternator management * MJ8 ECO start-stop function * MS1 Cruise control * MX0 BlueEFFICIENCY package * OA3 Diesel customer service measure Tax Code 1 * OD4 Diesel Customer Service Tax Code 4 * Q50 Removable Trailer Hitch Ball Head * SA6 Passenger Airbag * SB1 Driver's Comfort Seat * SB2 Passenger's Comfort Seat * SE4 Lumbar Support for Passenger Seat Ndjdpfx Ajwbmpusfwea * SE5 Lumbar Support for Driver's Seat * T14 Active Sliding Door Lock * T70 Child Safety Locks on Passenger Compartment Doors * T74 Grab Handle for Entry * U73 Armrests for Passenger Compartment Seats * US4 3-Seater Comfort Bench Seat in 1st Row, Outer Seat Folding * V23 Interior Trim, Upscale Version * V36 Roof Lining * V41 TPO Plastic Flooring in Passenger Compartment * VH1 Grab Handles in Rear * VV2 Cargo Anchoring Rail System * VV9 Roof Frame Mounting Points * VY2 Black Tunja Fabric * W16 Front Left Window, Fixed in Sidewall/Sliding Door * W17 Window Front right, fixed in side wall/sliding door * W29 Fixed rear window * W65 Tailgate * W70 Tinted rear window, black glass * W78 Window in tailgate/rear door with wiper and washer system * X30 Registration Certificate Part 2 * XA6 Weight variant 3.05 t * XC8 VIN visible from outside * XC9 COC papers * XN8 Modification year U8-II * XO9 Mercedes-Benz Mobilovan with DSB and GGD * XU1 Signs/Printed Texts in German*

Condition: new, mileage: 490 km, power: 100 kW (135.96 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 8 m³, loading space length: 3,130 mm, loading space width: 1,800 mm, loading space height: 1,545 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Model Year * Model Year: 2024 Ndedowlx Hgspfx Afwsa Transmission * Manual transmission, 6 speeds Driver Assistance Systems * Cruise control * Rear parking sensors * Rearview camera * Driver fatigue detection * Traffic sign recognition Lighting & Visibility * Headlight range adjustment * Rain sensor * Tinted windows * Daytime running lights * Light sensor Audio & Communication * Radio * Digital radio reception DAB * AUX & USB connection * Bluetooth hands-free preparation * Smartphone app integration Exterior * Leaf spring suspension * Drive: rear-wheel drive * Trailer coupling, ball-type * Electrically adjustable and heated exterior mirrors * All-season tires * Rear doors with 270° opening angle * 1x 13-pin connector: pre-installed * Touchscreen controls Safety * Driver/passenger airbag * Electronic Stability Program ESP * Traction control ASR * Anti-lock Braking System ABS * Tire pressure monitoring system * Immobilizer * Emergency brake assist Interior * Cloth seats * Multifunction steering wheel * On-board computer * Sun visor * Partition wall * Wooden load compartment floor * High plastic sidewall cladding in load compartment * Rubber flooring Comfort * Air conditioning * Height-adjustable driver seat * Driver armrest * Passenger bench seat * Power steering * Adjustable steering column * Electric windows * Central locking with remote control * Cup holders Cargo area * Length 3,130 mm, width 1,800 mm, height 1,545 mm * Volume 8 m³ Other dimensions and weights * Permissible total weight: 3,500 kg * Gross train weight: 7,000 kg * Wheelbase: 3,520 mm ----- Special price – New vehicle / New model MY24 – 3-year manufacturer's warranty up to 75,000 km – Detailed quotation available upon request – Financing / hire purchase / leasing available at top conditions on request – Maintenance contract (WRV) available individually for an extra charge – Optional extras such as beacons, strobe lights, work lamps, etc., available upon request – Delivery possible for an additional charge – Subject to prior sale – Your contacts: – Mr. Axel Scheske, Tel. Mr. Luca Netter, Tel.