Used Paper Spindle for sale (13,985)

Condition: used, Spindle diameter 30 mm Hjdpfxswhc N Dj Apnsnl reus 3.000/4.500/6.000/9.000 U/min Clamping length ca. 120 mm links und rechts

Condition: used, Spindle diameter 30 mm Hedpjv Hf Uujfx Apnjnl reus 3.000/5.000/6.000/10.000 U/min ca. 120 mm links und rechts

Condition: used, Year of construction: 1992, SCHÜTTE SF 26 DNT Max. bar diameter round / square: 26 / 19 mm Spindle pitch circle diameter: 270 mm Bar feed: 125 mm Longitudinal slide travel (total / work): 80 / 63 mm Cross slide travel (total / work): Upper: 40 / 25 mm Middle: 40 / 25 mm Lower: 50 / 31 mm Spindle speeds (stepless): 530 – 3,750 rpm Main times (stepless): min. / max. 0.72 – 100 s Secondary times: 0.90 – 1.1 s Hnsdpfx Ajyxcvxspnjl Creep speed: 3 rpm Main drive: 22 kW Dimensions (incl. bar guidance): approx. L x W approx. 7.2 x 1.6 m Weight: approx. 6.8 t Voltage: 400 V / 50 Hz Scope of delivery: Machine SCHÜTTE SF 26 DNT bar feeder

Condition: used, Year of construction: 1988, SCHÜTTE SF 32 Maximum bar diameter round / square: 32 / 22 mm Spindle pitch circle diameter: 300 mm Bar feed: 125 mm Longitudinal travel (total / working): 100 / 80 mm Cross-slide travel (total / working): Upper: 50 / 33 mm Center: 50 / 30 mm Lower: 60 / 37.5 mm Spindle speeds (49 steps): Range I: 450 – 3,150 rpm Range II: 200 – 1,400 rpm Hsdpsyxcr Hofx Apnsnl Workpiece speeds per cycle: Normal: 60 – 425 Short: 33.5 – 236 Long: 95 – 670 Main times (35) per spindle revolution: Min. / Max.: 0.63 – 200 s Normal: 1.12 – 125 s Short: 0.63 – 71 seconds Long: 1.8 – 200 seconds Secondary times: 0.7 – 1.25 seconds Main drive: 18.5 kW Dimensions (incl. bar feeder): approx. L x W 6.5 x 1.5 m Weight: approx. 8.3 t Voltage: 400 V / 50 Hz Scope of supply: SCHÜTTE SF 32 machine Bar loader

Condition: used, Year of construction: 1988, SCHÜTTE SF 32 Maximum bar diameter round / square: 32 / 22 mm Spindle circle diameter: 300 mm Bar feed: 125 mm Longitudinal travel (total / working): 100 / 80 mm Cross slide travel (total / working): Top: 50 / 33 mm Middle: 50 / 30 mm Bottom: 60 / 37.5 mm Spindle speeds (49 steps): Range I: 450 – 3,150 rpm Hsdpfxsyxcuuj Apnonl Range II: 200 – 1,400 rpm Workpiece feed per cycle: Normal: 60 – 425 Short: 33.5 – 236 Long: 95 – 670 Main times (35) per spindle revolution: Min. / Max.: 0.63 – 200 s Normal: 1.12 – 125 s Short: 0.63 – 71 s Long: 1.8 – 200 s Secondary times: 0.7 – 1.25 s Main drive: 18.5 kW Dimensions (incl. bar guide): approx. L x W 6.5 x 1.5 m Weight: approx. 8.3 t Voltage: 400 V / 50 Hz

Condition: used, Year of construction: 2002, Technical Details: SCHÜTTE SG 18 Max. bar diameter round / square: 18 / 13 mm Spindle pitch circle diameter: 180 mm Bar feed: 80 mm Longitudinal slide travel (total / working): 63 / 50 mm Cross slide travel (total / working): 32 / 20 mm Spindle speeds (infinitely variable): 800 – 10,000 rpm Main cycle times (infinitely variable): min./max. 0.24 – 45 s Secondary times: 0.30 s Main drive: 11 kW Feed motor torque: 18 Nm Dimensions (including bar guide): approx. L x W approx. 5.5 x 1.3 m Weight: approx. 5 t Voltage: 400 V / 50 Hz Operating hours: 14,304 h Scope of delivery: - Bar feeder Pra 52 P IEMCA Hnjdpfxjymdd So Apnsl - RUEZ KF0WW2/312 DAS, year 2002

Condition: used, - For Weinig: Unimat, Profimat, Unicontrol, and many more - For SCM: Profiset, Sintex, Topset, and many more Hnedjlnlgtspfx Apnol - Please send us an inquiry specifying the required dimensions.

Condition: good (used), Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press -Manufacturer: Allgaier, manual spindle press -Pressure capacity: approx. 20 tons -Insertion height: 345 mm -Column clearance: 300 mm -Table width: 300 mm / Bore Ø 60 mm -Spindle mount: Ø 40 mm Hnsdpfx Apsyxda Sonsl -Dimensions: Ø 1420 x 1780 mm -Weight: 277 kg

Condition: new, spindle passage 230 mm turning diameter over bed 970 mm turning diameter over slide rest 720 mm Control Fanuc OiTD turning length 2200 mm total power requirement 37 kW Year of manufacture 2013 Control: Fanuc OiTD Other controls possible Turning length (mm) 2200 Max. turning diameter (mm) 970 Max. turning diameter over slide (mm) 720 Spindle diameter (mm) 230 Diameter range (mm) 850 Speed: 500 kW 37 Voltage: 400V Hz 50 Including: 4-jaw chuck, Ø 800 mm rear Pneumatic 3-jaw chuck, Ø 600 mm front The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Hnedpfx Asyqupaspnsl About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, PTP VPU 1 Conventional milling machine Table dimensions: 260x1000mm Taper: 40mm X axis: 500mm Y axis: 300mm Z axis: 400mm Dimensions: 170x130x145mm Variable speed Vertical and horizontal use Power supply Head adjustable in degrees With cooling pump Location: Hamont-Achel, Belgium Call or mail for more information See also our other advertisements We are also looking for industrial machines throughout the year. Do you have redundant machines, mail them to us with pictures and information. PTP VPU 1 Conventional Milling Machine Table dimensions: 260x1000mm Cone: 40mm X axis: 500mm Y axis: 300mm Z axis: 400mm Dimensions: 170x130x145mm Variable speeds Can be used vertically and horizontally Power supply Head adjustable in degrees With cooling pump Location: Hamont-Achel, Belgium Call or email for more information Hnjdpfx Aerzbktepnsl Also view our other advertisements We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. PTP VPU 1 conventional machines Table dimensions: 260x1000mm Cone: 40 mm X axis: 500 mm Y-axis: 300 mm Z-axis: 400 mm Dimensions: 170x130x145mm Variable speeds Can be used vertically and horizontally Power supply Head adjustable in Grad With vacuum pump Standort: Hamont-Achel, Belgium Für weitere Informationen rufen Sie an oder senden Sie eine E-Mail Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen

Condition: ready for operation (used), Year of construction: 2015, bale weight: 480 kg, Brand: HSM Model: V-press 860 plus Year of manufacture: 2015 Pressing force: 418 kN Voltage: 400 V Max. bale weight: 480 kg (depending on material) Bale dimensions: 120 x 120 x 78 cm Machine weight: 2083 kg Machine dimensions: 180 x 125 x 298.5 cm Feed opening dimensions: 120 x 65 cm Condition: Very good! Function tested. Hedpsy Nizcofx Apnsnl Video of the machine in operation available upon request. FLITS Rental & Sales service: With every machine, we provide a bundle of tying wire (120 wires). Need more bundles? Request a quotation without obligation.

Condition: used, Year of construction: 1980, Martin Spindle Moulder Model: Martin T 23 Year of manufacture: 1980 Spindle diameter: 30 mm Spindle stroke: 145 mm Max. tool diameter: 250 mm Pole-changing motor: 4.7/5.7 kW 2 speeds: 3000, 6000 rpm Table size: approx. 940 x 1100 mm Table height: approx. 850 mm Hnodpfx Apey Rzytsnjl Automatic motor brake Emergency stop switch Weight: approx. 800 kg

Condition: like new (used), functionality: fully functional, Model D2: Measurable sheet sizes: 100 - 1600 mm Accuracy of reading: 1/2 mm (1/10 mm possible) Angular deviations: 1/2 mm Built-in glare-free illumination: 3 fluorescent tubes (174 Watt) Voltage: 220 V - 50 Hz Exterior dimensions in mm: 1775 x 1150 x 220 Weight (without iron frame): ± 86 kg Price per item: 3,000. Hnodpfx Apeya Hflonol There are three measuring tables of this type available.

Condition: good (used), 2-spindle paper drilling machine Hnedpfx Apjy Sh Duonel

Condition: excellent (used), Year of construction: 1999, Robust Tilting Spindle Moulder T 26, tiltable from -45 to +45 degrees Spindle moulder in excellent specification. A real treat for every Martin enthusiast! Pole-changeable drive motor 5/6 kW with automatic motor brake Forward/reverse rotation Tilting angle electrically adjustable from -45° to +45° Height adjustment up to 150 mm, electrically adjustable When adjusting the height, a correction factor for the tilt angle is displayed on the upper readout, which is then set on the stop, allowing precise settings based on drawings Four spindle speeds: 3,000 / 4,500 / 6,000 and 9,000 rpm Spindle diameter 30 mm, quick-change spindle with torque wrench (Dornfix system) Comfort fence T226 with digital readouts for total adjustment and individual infeed jaw, as well as cutter diameter input—cutting depth is then calculated automatically Fence with lifting feature can be swung away (for curve milling work) Hedjy Ig Iwjpfx Apnonl Table opening via eccentric rings, electrically adjustable, three additional insert rings Table extension on right and left with extendable workpiece support Support can be extended up to 700 mm Table length approx. 2,400 mm Fold-away fence for slot mortising Aigner Centrex workpiece pressure unit Aigner integral fence: left 500 mm, right 600 mm New Steff 2048 4-roller feed unit with 8 speeds, forward/reverse rotation Feed socket switchable via control panel Comfort stand with electrically height-adjustable feed support, which can be swung away for machine setup and locked back in position afterwards Zeromaster for easy spindle height setup Two extraction ports, each 120 mm Compressed air connection 6 bar Emergency stop switch Some parts of the machine have been newly painted Feed unit renewed Drive belts replaced Operating manual CE-marked Dimensions approx. 3,000 x 1,500 x 1,830 mm (LxWxH). Weight approx. 1,800 kg. The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse—see “more offers from this dealer.”

Condition: good (used), Year of construction: 1973, Centre height: 150 mm Centre distance: 760 mm Max. turning diameter over bed/cross slide: 300/165 mm Spindle bore: 32 mm Spindle mount, short taper per DIN 55027: Size 5 Quill taper of tailstock: MT 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 inch threads: 75 - 2.5 TPI 19 module threads: 0.1 - 1.75 module 19 diametral pitch threads: 70 - 4 DP Electric drive: 220/380 V, 1400 rpm, 2.2 kW Hjdpfx Ajyu R Nkspnonl Weight: 800 kg Required space: 1800 x 770 x 1300 mm

Condition: good (used), Centre height: 125 mm Distance between centres: 800 mm Hodpfsyu R H Nox Apnsnl Max. turning diameter over bed/over slide: 280/245 mm Spindle mount, thread according to DIN 800 Spindle bore: 24 mm Infinitely variable spindle speeds: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 inch threads: 4 - 112 TPI Electrical connection: 380 V, 0.7/1.4 kW Required space: Approx. weight: 500 kg

Condition: ready for operation (used), Year of construction: 2009, bale weight: 550 kg, total width: 1,570 mm, total height: 2,985 mm, overall weight: 2,403 kg, total length: 1,800 mm, filling opening width: 1,195 mm, filling opening length: 65 mm, bale width: 110 mm, bale length: 120 mm, bale height: 120 mm, transport height: 225 mm, Brand: HSM Hnedpfx Apsy Iwi Esnsl Model: V-Press 1160 plus Year of manufacture: 2009 Pressing force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening: 119.5 x 65 cm Condition: very good! Video of machine in operation available on request.

Condition: used, Year of construction: 1977, centre height 450 mm centre distance 6150 mm spindle bore 140 mm Hnsdpfx Apjy Hl N Rsnsl turning diameter over bed 900 mm turning diameter over slide 660 mm spindle drive 15 kW external dimensions Breite 1750mm length 9000 mm height 1650 mm weight 8000 kg spindle speed: 11-500 UpM With a chuck, collet, and faceplate

Condition: used, machine/vehicle number: MR003046, Used tenoning machine, in good condition. Immediately ready for use. Price ex Staphorst. Manufacturer: Goma Van Groeneweghe. Machine equipped with saw and vertical spindle. Technical specifications: - Serial number: 248 Hnedpfx Asy I N Nkjpnjl

Condition: used, Year of construction: 1982, Center height: 220 mm Center width: 1250/1300 mm Swing diameter: over bed 440 mm Spindle bore: Spindle mount: Hodpfxovzn Its Apnsnl Tailstock taper: 5 MK Spindle speeds: 11.2 - 2240 rpm Feeds: longitudinal/transverse 0.1-2.8/0.05-1.4 mm/rev Thread pitches: Electrical connection: 380 V, 11 kW Space required: 3400 x 1400 x 1300/1700 mm Weight: approx. 2700 kg

Condition: ready for operation (used), Year of construction: 2019, cutting length (max.): 550 mm, Hydraulic stack cutter Cutting length: 550 mm Cutting height: 95 mm, 92 mm with clamp bar cover Residual cut: 32 mm, 60 mm with clamp bar cover Insertion depth: 570 mm Hnodpfx Apey Rruhjnel Clamping: automatic clamping Clamping pressure: 200 – 1100 daN Knife drive: hydraulic Control: 7-inch touchscreen Connection values: 230 V / 50 Hz / 1.5 kW

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). We have used this machine in our workshop to drill wooden fence profiles. It has provided us with reliable service over the past few years. As our customer is switching to plastic profiles, we no longer have use for it. Hjdsywtxbepfx Apnsnl This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Further videos and technical data about this machine series can be found at the following link: ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html The machine's operating manual is of course still available.

Condition: good (used), Year of construction: 2014, Year of manufacture: 2016 (according to manufacturer’s information) Counter reading (sheet infeed): approx. 7 million - 5 components - Barcode control system - Ionization Special features: 9 laser sensors for processing Scodix material Technical data (without guarantee) - Max. infeed format: 762 x 530 mm - Min. trimmed final format: 100 x 105 mm Hsdpfx Apeynf Tksnjnl - Feeder stack capacity: 800 mm - Max. delivery stack capacity: 254 mm

Condition: excellent (used), Year of construction: 1993, Polar Mohr 58 EM Technical Details: Overall dimensions: approx. 1,150 x 1,350 x 1,360 mm (W x D x H) Front table length: 425 mm Cutting length: 540 mm Insertion depth: 580 mm Knife thickness: 100 mm Hnodpjy R Ewvsfx Apnel Max. knife grind-off: 22 mm Clamping pressure: 190 - 1,450 daN (adjustable) Voltage: 380 V Current consumption: 3.7 A Frequency: 50 Hz Machine weight: approx. 520 kg