Used Paper Tube for sale (4,403)

Year of construction: 2026, condition: new, Winder for spool´s up to 10kg gross weight with clamping conus and traverse guiding, Gjdpodlpyuefx Abujbh adjustable speed and travelling width

Condition: good (used), functionality: fully functional, You are bidding on a used paper cutting machine. All functions are operational. Gsdpfsyfpqnjx Abujbh IDEAL 4850-95 EP guillotine cutter with automatic clamping and programmable backgauge control. 450 mm cutting length | electro-mechanical blade drive | automatic clamping | electrically driven backgauge with “EP” control module | electronic handwheel with infinitely variable speed for fine manual backgauge adjustment | dual-guided clamp bar, independently controllable from the blade | precision backgauge spindle | adjustable backgauge bar with fine pitch and plastic sliders | two side guides each on the front and rear tables | solid steel blade carrier and adjustable blade guides | complete with stand and paper storage shelf | SCS (Safety Cutting System) with comprehensive safety package: electronically monitored, pivoting safety guard on the front table; transparent safety cover on the rear table; main switch and safety lock with key; two-hand cut activation with repeat cut lock and simultaneous operation control; 24-volt control; patented IDEAL safety drive; automatic retraction of blade and clamp from any position; disc brake for immediate blade stop; blade change device with covered cutting edge; blade depth adjustment accessible from outside; simple front blade replacement without removing housing parts. Power supply: 230 V / 50 Hz / 1 phase, Rated motor output: blade drive 1.1 kW, clamp drive 0.32 kW, carriage drive 0.1 kW, Dimensions (H x W x D): 1230 x 755 x 970 mm, Weight: 215 kg, Colour: pearl grey.

Condition: ready for operation (used), max. extension approx. 12 linear meters with large-format roller supports, pull-out frames on tripod and Lifthet electric chain hoist, load capacity 1000 kg with guide rails, approx. 40 linear meters to be auctioned at our auction on 19.2.2026 Gedpfx Ajyb R Iyobuobh

Condition: new, The KPB 81, a robust Tube and Profile Rolling Machine, excels in high-performance bending, combining modern mechanical engineering with powerful hydraulics. This advanced machine allows you to bend medium and heavy steel profiles with remarkable precision, making it ideal for various applications in metal construction, locksmithing, and mechanical engineering. Equipped with three motor-driven rollers, hardened and ground shafts, and an overload slip-clutch, the KPB 81 ensures efficiency and safety. The modular roller system provides optimum adaptability for bending a wide range of profiles, while the hydraulically adjustable bending rollers enhance versatility, allowing for both horizontal and vertical machining. Standard equipment includes a digital display, control panel, and operator manual for intuitive operation. To experience the precision and performance of the KPB 81 in the Tube and Profile Rolling Machines category, you can request a quote today. Gjdpon Upglsfx Abujbh

Condition: excellent (used), Year of construction: 2016, Complete line for packing products like flour, semolina etc into small, fold top paper bags. Was installed new in 2017. Photos show the machine set-up for potatoes. Price of machine without potato weigher is EUR 25,000 Gsdpfx Absttwt Asuebh

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 89N1160, cutting width (max.): 800 mm, insertion depth: 800 mm, overall weight: 900 kg, reverse speed: 70 mm/s, TECHNICAL DETAILS Cutting width: 800 mm Insertion depth: 800 mm Maximum operating height: 100 mm Pressing force: 180–2,700 daN Minimum cut without cover plate: 15 mm Minimum cut with cover plate: 50 mm Return speed: 70 mm/s Gbjdpfxoycr Iko Abush MACHINE DETAILS Power consumption: 4.0 kVA Power supply: 400 V, 50 Hz, 2.6 A Control: 18.5" touchscreen Program memory: 1,998 jobs Total cuts: 24,551 Weight: 900 kg Table: Stainless steel with air support EQUIPMENT 1× mounted POLAR 78 1× new POLAR 78 SKH-2, 960×110×11.7 mm Process visualization Hydraulic swinging angled cut LED cutting line indicator Air table Robust machine body Ultra-fast knife change with POLAR OptiKnife New spare knife

Condition: used, Year of construction: 1987, total height: 5,000 mm, total width: 2,900 mm, total length: 5,600 mm, rotor diameter: 1,500 mm, rotor length: 1,780 mm, power: 200 kW (271.92 HP), Number of rows with blades / hammers: 4 rows (configuration for up to 40 heavy-duty hammers possible) Current setup: 80 blades (i.e., narrow version) Gbsdewif Tzspfx Abujh Equipped with brake disc and turbo coupling

Condition: used, Year of construction: 1992, Manufacturer : Norden Model : Nordenmatic 700 Year : 1992 Type: Automatic tube filling and sealing machine Capacity: 70 tubes max Filling volume: 1 - 300 ml Dosing accuracy: +/- 0.1-0.5% Tube size range: Length: 50-250 mm / Diameter: Ø 10-50 mm Empty tube feeding : automatic Cleaning + Tube orientation device with a stepper motor Sealing Module: HA - Hot Air Number of buckets: 22 units Gbedpfx Abex R D Exsush Product feed hopper + dosing pump Vulcanic Vulcatherm cooling unit (year: 2004) - 3.5 kW (10°C - 35°C) / Outlet temperature: 25°C max - min 3°C Laminar flow Machine dimensions: 135 x 190 x 210 cm Weight : 2 400 kg Spare parts sold with the machine. Choose from two formats among many available formats (additional formats can be added as an option). Full documentation available Video in operation available

Condition: used, Year of construction: 2017, Manufacturer: Manut LM Model : MAN Year: 2017 Gbjdpfsx R A Nvox Abueh Body type : Vacuum Tube Manipulator Application : Handling of bags and boxes Maximum load : 30 kg Classification: ATEX Vacuum pump : Becker SV 8 400/2 Dimensions : see photo drawing.

Condition: used, Manufacturer: Hanovia UV Godpfsx R A Ilsx Abusbh Model: PMS150G4/4 Type : Ultraviolet disinfection system Application: Ultraviolet (UV) water/liquid treatment Pressure rating: 7 bar Maximum pressure loss: 0.15 bar Maximum flow rate: 133 L / min - 8 m3/hour Temperature: 80°C

Condition: used, Manufacturer : Cotuplas Model: S4 Type : Manual sealer for plastic tubes Applications Production of samples for demonstration Market research Production of tubes for small or medium production runs Laboratory testing, internal product compatibility Features S4 unit accepts tubes from 13.5 mm to 60 mm in diameter and up to 230 mm in length Manual production speed of up to 240 tubes per hour Adjustable timer from 0 to 30 seconds to meet sealing requirements The tube is positioned between the sealing jaws by the operator Tube positioning device ensures process repeatability and seal quality (missing parts, planned installation) 3.5 mm high jaws maintain pressure while sealing Spring-loaded jaws open effortlessly with a lever Consumption water : 100 L / h Gsdox R Aw Hopfx Abuebh electrical : 400 W

Condition: used, Year of construction: 1998, Manufacturer : Axomatic srl Model: Optima 900 Matic Year : 1998 Type : Plastic tube filler Max capacity : 70 units / min Dosing range : 2 ml - 300 ml Max tube length : 280 mm with cap Tube diameter: 10 mm - 60 mm Power : 7 KW Current: 18 A Gedox R Arkjpfx Abuebh

Condition: used, This listing is for a Qiagen Biorobot 8000 Tube Holder STS MDx 9mm box of 14 Gbedpfx Absxzg N Sjueh

Condition: good (used), Manufacturer: unknown Year of manufacture: Type: Pipe straightening and drawing machine Pipe diameter: up to 10 mm Pipe length – stop for measurement: 6,300 mm Operation: hydraulic Application: for heating pipes Gbodpsygv H Eefx Abujh Dimensions: 7,500 x 1,000 x 1,200 mm Weight: approx. 0.5 t

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 250 h, machine/vehicle number: 0131, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 670 kg, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, T U B O M A T – simply smart. TUB-C G3001 The tube bending machine is ideally suited for single parts and small series production. The software allows individual tubes to be parameterized, simulated, and saved. Bending data is then transmitted to the machine via network (LAN). Standard bending equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Familiar 4-fold preselection of bending angles or program mode - 80 memory locations for up to 10 sets - Actual/target value display for bending angles - Compact, forward-positioned bending head - Optimized tooling concept - Hydraulic bending drive, operated via proven hand lever - Hydraulic tube clamping - Hydraulic pressure die actuation - Hydraulic mandrel extraction - Mobile use possible - Saw unit for optimal right-angle cuts - Deburring unit for internal and external deburring - Universal base holder as drive unit for assembly attachments Technical Data - Tube capacity up to: 48.3 x 3.25 mm (E235, Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Max. bending angle: 180° (+10° overbend) - Bending accuracy: ±0.2° - Bending speed: 20°/s - Dimensions L/W/H: 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Electrical connection: 400 V / 50 Hz / 3 phase - Power supply requirements: CEE 16 A - Colour: RAL 9006 / 7021 / 5015 Software (Windows 11) PIPEFAB 4.0 BE Basic tube bending software package - Oracle Express database for single-user application - Creation of isometries (single tube) - ConCSVImp – import interface for CSV format - Calculation of bending data taking springback, elongation, and spring-in into account - Checking of clamping lengths, start and end lengths - Output of bending data (printout) - BendSim – bending simulation and graphical representation via parametric tool design - BendCon – creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool holders 1 set of adapters for bending rollers with 25 mm bore 1 clamping piece adapter installation space 100 mm 1 support for fixed pressure die installation space 100 mm Tools Bending tools consisting of bending roller, clamping piece, and pressure die (fixed) Tube diameters / Bending radii - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Mandrels 3000 mm for steel tubes Design with lubrication channel for minimal quantity lubrication (MQL) - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Pre-assembly studs for cutting ring fittings (L = light, S = heavy design) Tube Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Back-up plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes Tube Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S Gbjdox E Rdwopfx Abujh - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses possible. The machine is used but in like-new condition. The machine can be inspected and demonstrated by prior arrangement. The machine must be collected from our premises but can be loaded by us. Commercial sale. Price plus 19% VAT. Subject to prior sale and errors.

Condition: new, Year of construction: 2025, Effective Tube Cutting Length: 6500mm/9200mm Laser Output Power: 6000w/3000w/2000w/1500w Effective Round Tube Cutting Diameter: Φ20-230mm Effective Square Tube Cutting Diameter: □20*20-□160*160mm Edge Length: 20-170mm Outer Circle Diameter: ≤230mm Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1.Bigger than Bigger The maximum cutting diameter of T series is 30%longer than the mainstream products in the market ; The maximum cutting weight is 100% heavier than the mainstream products in the market. 2.Chuck position control, torque control function The position control CNC self-centering chuck with independent intellectual property rights can automatically clamp material according to the input tube size; Position monitoring in torque mode to ensure that the thick tube is not loosened and the small tube is not deformed;Brand new dust-proof structure, long-lasting use without lagging. Godpfxjg Dgbhs Abuobh 3.Edge-seeking, center-finding Brand new function of edge-seeking, center-finding. Optimized edge-finding method and algorithm, higher cutting precision and stability

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, STC-Ref:G-071-2415 Polar 137-ED-AT, Year: 2000 format: 0x1370 mm equipped: - safety light beam - airtable at right side - airtable at left side - type: 137-ED-AT - vertical ream racking system STR-1000-4, 2000 Gedjyb Sgdepfx Abuobh - photo-cell - down stacker Transomat TR-130-ER-4, 2000 - Autotrim - jogging table RAH-4, 2000 - rear table guard - datastore for programmes --> available: 02/2026

Condition: good (used), Polar Mohr N92 PRO HD Paper Cutting Guillotine Machine in perfect condition, serviced, and ready to work. Manufactured in 2021. Unprecedented model on the market. Cutting visualization on the monitor. Technical specifications: Gjdpfeyi Dcgjx Abujbh Cutting width: 920mm Stack height: 130mm Programmer with a 21.5” HD color touchscreen display 400V power supply Weight: 2000kg Enlarged side tables Chrome table surface Table backlight and optical cutting line Flexibly adjustable clamping force Additional rear table covers Spare knife, cutting sticks, tapping block, and operating tools.

Condition: good (used), Grafcut G73H Hydraulic Paper Cutting Guillotine Machine in very good condition. The machine was operated in a digital printing house, with low mileage. Description: • LCD touchscreen programmer (100 programs, each with 100 steps) • Hydraulic knife and pressure drive • PLC-controlled feed • Illuminated cutting line • Stainless steel-covered tables • Additional manual knob for moving the feed beam • Mechanical foot pedal for pressure adjustment • Pressure force adjustment • Side tables • Photocells protecting the work area • Safety features: knife stop control at top dead center, two-handed operation, rear table guard Gbsdpfx Absyi Dcasuoh • Air table • Quiet operation The machine is equipped with all safety devices and guards, and meets CE standards.

Condition: good (used), Ideal 7260 Hydraulic Paper Guillotine Machine in very good condition, ready for production. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine has a 721 mm knife length and is equipped with infrared safety curtains, a hydraulic hold-down device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable program with 99 steps each, electronic saddle position reading with 1/10 mm accuracy, and a self-diagnostic system with error messages displayed on the screen. The machine’s main work table is made of stainless steel and has a blower. A paper ejection function is included for ease of use. Technical data: Cutting length 721 mm Infeed height 80 mm Infeed depth 720 mm Front table depth 530 mm Minimum final offcut 20 mm Minimum final offcut with beam guard in place 90 mm Power supply 400 V / 50 Hz 1.5 kW Weight 588 kg Dimensions 1335 x 1305 x 1540 mm Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator (Laser), Air table (on front and rear tables), Gbodpfx Aboyi Db Nsujh Pedal for pre-marking the cutting line, Front table made of chrome-nickel steel, Blade made of high-quality HSS steel, Safety features ensured by: safety curtains – photocells transparent safety cover on the rear table safe drive – IDEAL patent two-handed, electronically controlled cutting start automatic knife return from any position main switch equipped with a key switch knife replacement possible with the blade permanently covered

Condition: good (used), Schneider Senator PL1 Q-600-H Paper Stack Lift This machine is in perfect condition, practically new. Hydraulic drive, state-of-the-art hydraulic unit. 400V power supply. Automatic and manual lifting cycles, fast operation. Gbsdpfx Aeyi Daljbueh Load capacity: 600 kg. Pallet/sheet dimensions: 760 x 1090 mm

Condition: good (used), functionality: fully functional, Year of construction: 1995, Tube bending machine by MARK / Ridgid Gbedpfx Abox Ivpweush Type: 2H B Without tools

Year of construction: 1996, condition: good (used), PTW 150 Complete orbital tube welding machine with two complete and fully overhauled welding heads, (and 2 extra fully operational welding heads, respectively for up to 2" and 4") (see pictures) for sale. It includes "collets" (clamping sleeves) for most pipe dimensions from ½" to 4". This equipment is one of 5 orbital welding machines I have had, and it has mainly been used on 54x2mm, in addition to building 5-6 central gas systems with tubes of 12-18 and 28mm, and some 88.9mm. The equipment is complete, ready to weld with cables, gas hoses, red. valve etc. The equipment is delivered in original transport boxes, has complete set of manuals/part lists. Buyers can have the equipment delivered to their door, and up to 1 week of free training (including with many years of experience!) anywhere in Europe! New orbital equipment with the same spec, would cost typical some €40k + with just ONE weldhead. (One enclosed weldhead is typical €12-13000 without collets, typical €300 /dimension you will weld) At the two plants in Norway that operated with nuclear power (Kjeller and Halden), the same type of welding machine was the only one that was able to weld according to the requirements they set! (like 100% Helium, - 200 bar, - vaccum etc) The user interface is simpler on newer machines, but if you can calculate the circumference of a tube, you are well off. If you are wondering if orbital welding is something for you, it involves very little risk when you can get complete equipment, delivered on your door step, welding program for all pipe dimensions from ½" to 4" and one week of training for €10k, (and in addition 3 decades of experience) Godpfoycwk Rjx Abusbh

Condition: good (used), functionality: fully functional, Year of construction: 2002, control type: manual, degree of automation: manual, actuation type: hydraulic, pipe diameter (max.): 6,090,115 mm, tube wall thickness (max.): 3 mm, number of axes: 3, working height: 700 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 200 bar, pressure (max.): 200 bar, number of digital displays: 3, Equipment: CE marking, documentation/manual, emergency stop, quick-change device, Limpet coil roller hydraulic to form half round pipe from flat stainless steel strip and bending into wanted radius with spiral continuous. -Shafts output 80 mm Gbedpfjyik Hcox Abush -Interchangeable set of rollers on the shafts for the different size of pipe 60 mm , 90 mm , 115 mm -Coil holder for the reel metal strip with guide-way bench uncoiling and alignment the steel strip to the rolling machine -Pinching lower central roll adjustable to form the half pipe -Digital position readout to determine the bending diameter of the coil, the pitch of the coil, the half tube shape forming -hydraulic arm movable in 3 directions to set the pitch of the coil roll -Upper vertical support hydraulic operated to hold in position the formed diameter and collect the coils from diameter 700 to diameter 3000 mm -Operator console electric with push buttons and digital position readouts for the coil length, the bending radius and the forming load. -Service manuals and operation books along with the machine

Condition: used, Stack cutting machine, guillotine cutter, guillotine SCHNEIDER Type Senator 155 Rubber, paper and veneer shear, plastic shear, fabric shear Guillotine for paper, cardboard, rubber, wood, and veneer Paper shear, rubber shear, plastic shear, paper and veneer shear Machine no. 60178 Year of manufacture: 1968 Cutting length: 1550 mm Cutting height: approx. 125 mm Working height: 140 mm Back gauge: max. 1550 mm Motor power (blade drive): 5.5 kW Power supply: 380 Volt, 50 Hz - Two-hand operation for blade activation - Automatic pressing device holds the paper stack on the table - Manual clamp and blade activation via foot switch (operational) - Back gauge adjustment up to 1550 mm (can be adjusted manually via handwheel) - Retrofitted electric control not functional, without wiring diagrams, without user manual - Back gauge adjustment via servo motor (servo motor, controller, and control present, not functioning) Required space (L x W x H): 325 x 270 x 165 cm Space requirement for transport without disassembly: Length 330 cm x Width 270 cm x Height 175 cm Gsdedzqnyopfx Abujbh Space requirement for transport with disassembly: Length 550 cm x Width 220 cm x Height 175 cm (machine + table separately) Machine dimensions: Length 270 cm x Width 190 cm x Height 175 cm Back gauge table: Length 240 cm x Width 170 cm x Height 120 cm Weight of assembled machine: approx. 5000 kg (without transport steel plate) Good condition Ideal for cutting paper, cardboard, leather, cork, rubber, or fabric-reinforced rubber Sales price does not include the 20 mm steel plate on which the machine is placed in storage. (Price for the steel plate: EUR 900 net)