Used Paper for sale (2,426)

Condition: ready for operation (used), Year of construction: 1993, type of input current: three-phase, number of spindles: 4, 4-spindle paper drilling machine with available accessories Gjdpfeynl Izex Adbsip

Condition: good (used), Year of construction: 2016, Year of manufacture: 2016 (according to manufacturer's specification) Counter reading (sheet feeder): approx. 3.3 million. - 5 components - Barcode control - Ionization Godpfx Ajynf Tksdbjip Special equipment: 9 laser sensors for processing Scodix material Technical data (information without guarantee) - Max. feed format: 762 x 530 mm - Min. trimmed finished format: 100 x 105 mm - Feeder stack capacity: 800 mm - Max. delivery stack capacity: 254 mm

Condition: used, Vacuum lifting device for paper rolls NAGRON AEROLIFT Vacuum lifter for the paper industry Woudenberg Holland type R96-20 No. 9745 Year of construction 1999 Load capacity 2000 kg Centering pin Ø 90 mm Suction surface outside diameter 850 mm (plus seal) Suction surface inner diameter 250 mm (minus seal) Seal width 50 mm Suction area 0.5 m2 Vacuum min. -800 mbar Suction capacity approx. 100 m³/h per vacuum pump Motor power 2x 2.2 kW Mains connection 400 Volt, 50 Hz - 2 Rietschle vacuum compressors, type VCE 100 Dimensions Ø x H 1600 x 2250 mm Height with centering mandrel 2500 mm Giodjdzqc Iepfx Adbep Total height in transport frame 2950 mm Dead weight 2.5 tons

Condition: used, Year of construction: 2001, functionality: fully functional, cutting width (max.): 1,320 mm, input voltage: 400 V, Equipment: safety light barrier, For sale are 2 machines, being sold as a package. • Wohlenberg W132 guillotine cutter + jogging table. The pallet unloader has already been sold. Year of manufacture: 1979, equipped with cut-computer, 3 blades included. Gijdpfx Adjxxr Rcobsp • Wohlenberg W92 guillotine cutter + jogging table. 2 blades included, year of manufacture: 2002 Both machines must be dismantled and collected by 31/03/2026. - Condition: Used - good condition - see photos - This is a commercial sale and VAT will be shown separately on my invoices. - Price is net, plus 19% VAT. - The machines are still in use and available by arrangement. - Viewing appointments can be arranged at any time. - Sale without warranty or guarantee.

Condition: used, Year of construction: 1998, machine/vehicle number: M-115H- 007-02/15-08, cutting width (max.): 1,150 mm, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, Equipment: safety light barrier, We offer this used Schneider Senator Schneider Senator 115H - TSC paper cutting machine - Guillotine, year of manufacture 1998. Manufacturer: Schneider Senator Model: Schneider Senator 115H - TSC Year of manufacture: 1998 Condition: used Machine type: paper cutting machine - Guillotine Gedpfeymy I Hox Adbeip If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: not inspected (used), Year of construction: 1985, functionality: unexamined, machine/vehicle number: 0485.1184.463, outer diameter: 1,300 mm, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you are obliged to collect the item within the designated period: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Tank diameter: 1,300 mm MACHINE DETAILS Dimensions & Weight Gisdpfx Adjynkapobsp Dimensions (L x W x H): 2,000 x 1,500 x 1,800 mm Machine weight: 700 kg External reference: Pieper - Lot 5

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, For sale is a Polar 92 X in excellent condition. This machine is a reliable industrial cutter designed for professional use in printing, finishing, and packaging/labeling environments. Ideal for precise cuts and efficient workflows. Highlights: Gsdpfx Adjx H Nb Robjip - Robust Polar industrial quality (durable, precise, proven in production) - Clean and exact cuts, even with high volumes - User-friendly controls ("X" model) - Suitable for paper, cardboard, and similar materials Condition / Scope of delivery: Very good Machine as shown/offered Inspection and test run available by appointment Optionally available as a package: On request, we can sell the Polar as a bundle including a pallet jack (ideal for handling paper stacks/pallets in production). The package price is accordingly higher – details and offer available upon request.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1183330, cutting width (max.): 210 mm, stack height: 40 mm, overall weight: 86 kg, type of input current: AC, total width: 640 mm, total height: 355 mm, total length: 870 mm, input frequency: 50 Hz, DGUV certified until: 09/2027, Equipment: safety light barrier, Version with automatic pressing. The machine is located in the training area and has only been used very little. This is the tabletop version. A second blade as well as cutting bars are included. Gsdpfoyua Trjx Adbsip

Condition: excellent (used), functionality: fully functional, IDEAL Stack Paper Cutter 5221-95 EP with automatic clamping and programmable backgauge control 520 mm cutting length 80 mm insert height 35 mm residual cut Electromechanical drive for blade and clamping bar. Electrically operated backgauge with EP control module. Digital measurement display, readings in cm/inch (accuracy to 0.1 mm). Direct input of measurements via numeric keypad. Memory key for repeat (chain) cuts. Programmable EP control for 99 programs, each with up to 99 steps (up to 9 dimensions can be saved as a single program step). Program steps can be recalled via Start button. Automatic set function for reference dimension. Programmable paper feed (EJECT). Electronic handwheel with infinitely variable speed for manual fine adjustment of the backgauge. Optical cutting line indicator. Clamping bar guided on both sides, can be operated independently from the blade. Precision backgauge spindle. Adjustable backgauge comb with fine pitch and plastic guides. Two side guides each on the front and rear table. High-quality blade made of premium knife steel. Full steel blade carrier and adjustable blade guides. Two additional side tables included. Comprehensive SCS safety package: Electronically controlled, swiveling safety guard on the front table; transparent safety cover on the rear table; main switch and safety lock with key; two-hand cut operation with repeat cut lock and simultaneous release control; 24-volt control system; patented IDEAL safety drive; automatic return of blade and clamp from any position; disc brake for instant blade stop; blade changing device with covered cutting edge; blade depth adjustment from outside; easy front blade change without removing housing parts. Power supply: 230 V / 50 Hz / 1~ Motor power (rated input): 1.1 kW. Dimensions: H 1260 x W 855 x D 1067 mm. Weight: 262 kg. The machine was under a maintenance contract. 2 side tables, spare blade, and 3 cutting sticks included. Shipping available. Gjdpfxeypfpbo Adbjip Please note: Our offers are for used machines, which may show signs of prior use (minor scratches or yellowing may occur).

Condition: ready for operation (used), machine/vehicle number: 25924, cutting width (max.): 1,100 mm, Seldom-used cutting table from our former post-processing department. In recent years, it has been used for cutting air filters. Gedpsytpyrjfx Adbeip

Condition: excellent (used), Year of construction: 2016, Ref: 11047 . 2016 EBA 721-06 LT Guillotine 72cm Automatic guillotine. Equipped with: Electro-mechanical blade drive Hydraulic clamp drive Infinitely adjustable clamping pressure (250-2000 kgs) with optical indicators Snap-in false clamp plate with optical indicator Spindle guided electro-mechanical back gauge drive for precise positioning Air table on front and rear table Foot pedal for pre-clamping or cutting line indicator Optical cutting line indicator with LEDS Durable stainless steel working surface on front table HSS steel knives Swing cut for more cutting precision Adjustable solid steel blade carrier guided on both sides Adjustable blade depth Stainless steel side tables (left and right) Electronically guarded front table area by photocell safety guard Transparent safety cover on rear table Two-hand safety activation with repetition blocking and control for synchronous operation Automatic return of blade and clamp from every position Main switch, safety lock and key Blade changing device with covered cutting edge Knocking-up device Features: 99 programs with up to 99 steps each Up to 9 repeat measurements can be integrated in one program step Program runs automatically – with electronic cutting monitor 10-button-keyboard for pre-setting of measurement 3 memory buttons available for individual measurement setting Electronic digital display with an accuracy of 1/10 mm ‘Set Function’ key for reference measurement Electronic hand wheel with infinitely variable speed for Fine adjustment of back gauge Push buttons for fast back gauge movement (forward and reverse) Automatic measuring correction in case of back gauge displacement Memory key for repeat cuts (manual) and additional automatic memory Paper eject function with and without program mode (advancing programmable) Delete and insert mode for correcting and modifying programs Integrated calculator Self-diagnostic system with error indication on display Metric and imperial changeover Specification: Giodex Nfr Ropfx Adbjp Cutting width: 720mm Cutting height: 80mm – 781mm Insertion depth: 720mm Front table depth: 530mm Minimum cut: 20mm – 901mm Back gauge speed: 53 mm/s Dimensions W x D x H in mm 1305/21002 x 1500/16002 x 1335

Condition: excellent (used), Year of construction: 2017, Ref:11049 . 2017 Ideal 5221-95 EP Guillotine. 52cm programable guillotine Equipped with: Electro-mechanical blade and clamp drive Power ‘EP’ back gauge Control module Electronic hand wheel for manual back gauge positioning Infinitely variable speed control (from very slow to very fast) Optical cutting line Adjustable back gauge with narrow separations and plastic gliders Two side lays each on front and rear tables High-quality blade made from “Solingen steel” Solid steel blade carrier and adjustable blade guides Automatic clamping system, guided on both sides for evenly distributed clamping pressure Clamp can be lowered or raised independently from blade Machine and stand can be separated for transportation through narrow doors (70 cm) Side tables (left and right) SCS (Safety Cutting System): hinged, electronically controlled safety guard on the front table Transparent safety cover on the rear table Main switch and safety lock with key Electronically controlled true two-hand operation 24V controls (low voltage) Disk brake for instant blade stop Blade changing device with covered cutting edge Blade depth adjustment from the outside of the machine Easy blade change from the front of the machine without removing covers. Digital display for measurement readout in cm or inches (display accurate to 1/10 mm or 1/100 inch) 10-button keypad for presetting of measurement Memory key for repeat cuts | 9 programs with 9 steps in each program (up to 9 repeat cuts can be integrated into a program as one single program step) Setting of program steps via “Start” button ‘SET’ function key for reference measurement Programmable eject function – for pushing out the paper Two programmable keys for quick setting of frequently needed measurements Self-diagnosis system with error indication on display Specification: Cutting length: 520 mm Cutting height: 80 mm Narrow cut: 35 mm Gijdpfox Nfr Djx Adbop Table depth: 520 mm Power supply: 230 V / 50 Hz

Condition: used, Year of construction: 2016, Ref:11045 . 2016 Dürselen PB 04 N Paper Drill Gijdpfsx Nfp Aex Adbsp Free standing 4 headed paper drill Equipped with: Four drilling heads with adjustable spacing. Pneumatic cooling and lubrication for drills. Automatic drilling cycle, foot pedal control. Waste directed to outer door Drill table with adjustment, front and side margins. Table lock is automatically released. Technical data: Diameter of the drill: 2-10 mm, Stack height: 60 mm.

Condition: as good as new (ex-display), functionality: fully functional, Very nice Polar cutting machine for sale. Polar paper cutting machine for sale. Type 58 E (new model) with digital programs, chrome table, and safety photo cells. Excellent condition, complete with all standard accessories. Gedpeykatdjfx Adboip This machine has been very well maintained and has seen little production use. You are of course welcome to test this machine at our facility. We can arrange transport/packaging for you and load it onto a truck or container. Ask for a price including transport (location: The Netherlands). Regards, Henk Hoos.

Condition: excellent (used), Year of construction: 2020, operating hours: 22,500 h, functionality: fully functional, machine/vehicle number: 9041013, type of input current: three-phase, input current: 10 A, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, safety light barrier, Polar Mohr N 137 Plus – High-Performance Cutting Machine Gjdpeyc Hktofx Adbsip Year of manufacture: 2020 | Only 22,129 cuts | incl. spare blade | Top condition For sale is a Polar N 137 Plus high-performance cutting machine, built in 2020. The machine is in exceptionally good and well-maintained condition, with only 22,129 cuts on the counter – essentially as new. Highlights & Features • Professional industrial cutting machine for maximum precision • Very low cut count (22,129 cuts) • Spare blade included • Large air tables at the front and rear for gentle material handling • User-friendly operation via Polar N 137 Plus touch control panel • High cutting accuracy and repeat precision • CE-compliant, GS-certified • Made in Germany Key Technical Data (excerpt) • Model: Polar N 137 Plus • Year: 2020 • Total cuts: 22,129 • Cutting width: 1,370 mm • Power supply: 400 V / 50 Hz / 3-phase • Rated current: 10.1 A Areas of Application • Commercial and digital printing • Packaging and carton manufacturing • Further processing, collating, and cutting operations • Ideal for small to large production runs with the highest quality requirements Conclusion This Polar N 137 Plus is the perfect choice for companies seeking an almost new cutting machine with minimal operating hours. With its 2020 year of manufacture, extremely low cut count, and additional spare blade, this machine represents an exceptionally attractive market opportunity.

Year of construction: 2019, condition: excellent (used), machine/vehicle number: 706DGY00306, Part No.: 950 024 014-02 Counter: 220,000 sheets Equipment / Additional information: Gijdpfxoipmibo Adbsp Sheet length up to 72 cm Whether brochures in A4 landscape format, posters, banners or six-page folded leaflets in A4 format, the BDT VX370 feeder ensures the efficient production of numerous printed products. In addition, the feeder can handle a very wide range of media types (60 to 400g/m²) by using the patented, vacuum-free Tornado media handling technology. This unique lifting and transport mechanism ensures reliable handling of paper, cardboard, plastic, foil and other substrates. The storage of repeat jobs is also possible with the BDT VX370 and thus supports productivity and reduces set-up times. The VX370 feeder supports print service providers who need a high-volume feeding solution to handle a wide range of different sheet sizes and banner media with excellent application flexibility.

Condition: excellent (used), machine/vehicle number: 511.1012.471, Cutting Area Length: 150 cm Max Cutting Thickness: 0,6mm Gsdpfjxugxtex Adbsip Equipment / Additional information: ELECTRO TRIM professional electric paper cutter. Made in Italy, realized to cut various materials such as paper, acrylic film, photo-film, photographic paper. Electro Trim is equipped with a hardened steel rotary blade cutting head, mounted on a sliding tube. The metal parts are powder-coated which ensure high resistance to cuts and scratches. The standard model includes a support for positioning on the ground with adjustable feet, the paper collection curtain for paper waste and a lamp that lights up the cutting area.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 935 590, STC-Ref:G-291-0023 Gjdpsyl Iz Eefx Adbsip IDEAL 5221-A, Year: 05/1989 format: 0 x 520 mm equipped: - cutting width 520 mm - cutting hight 80 mm - cutting depth: max. 520 mm - electromechanical knife drive - automatic pressing - spindle-guided backstop - Electric carriage forward and reverse movement - digital measurement display - 1 spare knive --> available: 03/2026

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Characteristics * Speed 350 m/min * 500 cuts/min * 8 unwinding stations * 10 cutting blades (pair) * 2 sets of cutting blades * Cutting capacity (set) 540 gsm * Cross cutter max.load 805 gsm Sheet output * Paper sheet width min: 350 mm * Paper sheet width max: 2200 mm * Paper sheet length min: 400 mm * Paper sheet length max: 1650 mm * Stack height incl.pallet: 1800 mm * Stack weight incl.pallet: 5000 kg Roles input * Roll diameter min: 500 mm * Roll diameter max: 1500 mm * Roll weight max: 5000 kg * Sleeve diameter min: 76 mm Godpevphiysfx Adboip * Sleeve diameter max: 150 mm

Condition: good (used), functionality: fully functional, Paper production line consisting of stock preparation, paper machine, inline coaters, offline coater, calander, reeler, offline calanders and slitter winders. Various updates including headbox, top former, press section, offline coater, Voith speedsizer, Voith jet coaters and steambox & ceramic rolls. Characteristics: Capacity: max ~ 240000 T/pa Width: 4800 mm Grammage: 40 – 170 gr/m2 Giedpfxsvptqij Adbep Speed: max 1165 m/min

Condition: good (used), functionality: fully functional, Paper production line consisting of stock preparation, paper machine, inline coaters, calander, reeler, offline calander, slitter winders and reel packer. Fully upgraded by Valmet in 2019, including formmaster, topformer, shoepress, pre-dryer section, inline coating, multinip calender and reeler. Characteristics: Capacity: max ~ 350000 T/pa Width: 7500 mm Grammage: 35 – 170 gr/m2 Godpfx Ajvptbusdbjip Speed: max 1400 m/min

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 140311, cutting width (max.): 1,150 mm, Equipment: documentation/manual, Paper slicer- DATIEN 115 ECE group SBL Model: CT - 115 ECE Year of production: 2014 Factory number: 140311 Condition: Perfect. The slicer worked in a very small load. Machine connected, possibility of testing. Spare knives - 2 pcs. total 3 pcs. Full technical documentation Attractive price for quick sale. Giodpfxet U D Huj Adbjp

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, STC-Ref:G-071-2415 Polar 137-ED-AT, Year: 2000 format: 0x1370 mm equipped: - safety light beam - airtable at right side - airtable at left side - type: 137-ED-AT - vertical ream racking system STR-1000-4, 2000 - photo-cell - down stacker Transomat TR-130-ER-4, 2000 - Autotrim - jogging table RAH-4, 2000 - rear table guard - datastore for programmes --> available: 02/2026 Gedpfjyb Sgdsx Adboip

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, cutting width (max.): 760 mm, Equipment: safety light barrier, STC-Ref:G-172-3199 Schneider Senator-76 e-line ,Year: 1998 format: 0x760 mm equipped: - type: Schneider Senator 76-e-line - safety light beam Giodpjygmf Sofx Adbjp - rear table guard - datastore for programmes - 1 spare knives - 2 sidelay tables - airtable - monitor --> available: 03/2026

Condition: used, Year of construction: 2010, functionality: fully functional, Used Kongsberg plotter from 2010 Gedpoymb Alofx Adboip Work area: 1680 x 2190 mm Used in packaging development for sample creation. Handles E-flute up to BC-flute Regularly maintained Last inspection by Kongsberg 02/25 – all in order Viewing and test jobs possible at any time.