Used Paper for sale (2,496)

Condition: good (used), Schneider Senator PL1 Q-600-H Paper Stack Lift This machine is in perfect condition, practically new. Hydraulic drive, state-of-the-art hydraulic unit. Ljdpfx Ahox Hqlwezjhb 400V power supply. Automatic and manual lifting cycles, fast operation. Load capacity: 600 kg. Pallet/sheet dimensions: 760 x 1090 mm

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: Lhjdpfju Tg Spjx Ahzjb There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: like new (used), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, Good as new flat bed cutting machine. all knifes included plus compressor. Software will be provided plus support number of the dealer based in Netherlands. Lodpfxoxc Nv Rj Ahzshb

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: 001-2023, Band Saw for Sale – Complete Documentation Included and all machine papers are provided, including direct contacts of the manufacturer’s technical staff. Included Equipment: -Log feeding system (visible in the video) -2 brand-new high-quality blades -2 sets of sharpeners for blade sharpening Cutting Capabilities: -Cutting diameter range: 9 – 32 cm -Can cut rolls up to 60 cm length (medical sheets) -Upgrade option available for cutting 2 logs at once -Approximately 20 cuts per minute -Blade and Cutting Control -Automatic blade sharpening -Adjustable sharpening length -Adjustable sharpening frequency (after how many cuts) -Adjustable cutting speed for all cuts -First and last cut can be individually slowed down or sped up -Blade speed adjustable Ljdpexz Smvefx Ahzohb -We operate the machine at 40% speed and have never needed to go higher -Adjustable starting point of the moving table -Each individual cut can be configured separately -Blade guides made from high-quality bearings -Blade width: 9 cm -Blade thickness: 1.2 mm -Blade tension indicator -Adjustable blade wheel angle Machine Build Quality: -Built from high-quality components and quality mechanical parts

Condition: good (used), Year of construction: 2001, functionality: fully functional, KAMPWERTH SHD 1600 horizontal baler, incl. 3 interchangeable containers 48000x2800x3000 Paper baler // Waste baler // Refuse baler Lhedoxm Skrepfx Ahzeb Baler, 1 unit • Type: Kampwerth SHD 1600 • Year of manufacture: 2001 • Unladen weight: 3,500 kg • 15 kW • Dimensions: 5000x2300x3700 mm (disassembled for transport) Container box for baler, 3 units • Year of manufacture: 2001 • Volume: 28 m³ • Unladen weight: 3,100 kg • Filling weight: 12,000 kg • Dimensions: 7000x2400 mm Location: Bielefeld

Condition: used, 1-Spindel-Papierbohrmaschine / 1-head spindle Paper Drilling Hang 136 1-Spindel-Papierbohrmaschine / 1-head spindle Paper Drilling Hang 136 Ledpfxsxu T Alj Ahzehb Serial-No. 60654 Seitenanschlag  Side stop for fine adjustment Tiefenanschlag / Depth stops for fine adjustment Stapelhöhe / Stacking height max. 50mm Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, cutting width (max.): 920 mm, Equipment: safety light barrier, Perfecta 92 TVC 2003. BIZTONSÁGI FÉNYSOROMPÓ, LEVEGŐ ASZTAL, KÉTKEZES INDÍTÁS, GYÁRI SZERSZÁMKÉSZLET Lodpex Rzcnsfx Ahzjhb 1+1 KÉS

Condition: used, Year of construction: 2011, Machine number 8161027 Built in 2011 Max. paper length 12 cm Max. paper width 78 cm Air table Yes Side table left Yes Side table right Yes Photo cells Yes Length x width x height 2000.0 × 2280.0 × 1700.0 Weight 1300 kg Lhjdpoxx Tu Aofx Ahzsb

Condition: good (used), Year of construction: 2001, Paper cutting machine Polar 78 ES Year of manufacture: 2001 Includes tools and 2 spare knives. Lsdpfx Aowtnwwehzehb

Condition: used, functionality: limited functionality, Precision 520V Paper cutter. Lhjdpsr Eiz Ujfx Ahzob Automatic, steel part broken, unit functional. Power 1300W. Please check out our other listings as well.

Condition: used, functionality: fully functional, SummaSign Pro D1010 Cutting plotter Lhsdpsrzbp Rjfx Ahzob Good working condition. Please check out our other listings as well.

Year of construction: 2019, condition: ready for operation (used), An Inova saw for cutting paper cores is available. Paper core length range: 50mm-2000mm, paper core inner diameter: 400mm-500mm, wall thickness range: 15mm-30mm, max. payload: 30kg. Machine dimensions X/Y/Z: approx. 3500mm/1000mm/1850mm, weight: approx. 1600kg, control: Siemens HMI. Dokumentation vorhanden. An on-site inspection is possible. Lhsdpsxx Udxofx Ahzob

Condition: good (used), Wohlenberg 92 Paper Guillotine The device is in perfect condition, very low mileage. An unusual machine on the market. This is the newest model, currently in production. In one hands from new. Under a service contract until the very end. Year of production 2011. Technical data: Cutting width: 920 mm Stack height: 120 mm Weight: 2000 kg Power supply: 400 V Equipment: – programmer with 19” touch screen monitor – CIP-3 and CIP-4 operation, visualization of cutting on the monitor – memory expansion via USB, possibility of connecting the machine to the network – photocells – air table – cutting line Lsdpfx Ahjw Ht Uhszjhb – chrome table surface – rear saddle control on a servo motor – super fast work, always stops at „0” – hydraulic clamp with smooth force regulation – user manual – set of tools – sheet metal for clamp – tapping block – spare knife

Condition: good (used), Hang 117-01 paper drill The device is in perfect condition, 100% functional. The highest class of machines among drilling machines. Each head is independently adjustable, which allows the use of drills of different lengths. Drill table adjustable in every plane, with a lock. Lhodpfjvac Hhox Ahzjb The spacing of the heads is adjustable with a crank. Waste directed to an external container. Two operating speeds: 950 and 1900 rpm Technical data: number of drilling heads: 2 diameter of lights: 3-10mm stack height: 60mm drill spacing min: 45mm / max 160mm table dimensions: 780x430mm Weight: 100kg Power supply 380V The machine has documentation, maintenance tools, drills, and a new column

Condition: good (used), HANG 114-00/4 paper drill The device is in very good condition. This is the latest product of the hang brand. The highest class of machines among drilling machines.. Waste directed to an external container. Controlled by an electric foot switch. Each head is independently adjustable, which allows the use of drills of different lengths. Lsdpfxjt N R Nrj Ahzehb Technical data: number of drilling heads: 4 drill diameter: 3-10mm stack height: 65mm drill spacing max260mm drill speed: 1500 rpm two table lifting speeds table dimensions: 600x480mm Power supply: 400V Weight: 400kg The machine has documentation, operating tools and drills.

Condition: good (used), Horizon APC-T61 Hydraulic guillotine The machine is practically new, fully operational, ready for production. High-performance, precise hydraulic cutter – for small and medium-sized printers, bindery and digital printers. Equipped with programmable control, designed for low-cost, frequently changing orders. Control: Ability to save programs to memory electronic digital display with an accuracy of 1/10 mm starting the program with the „start” button Knife beam and hydraulic pressure drive cutting line pressure plate for cutting delicate materials foot pedal for measuring the pressure safety covers on the rear table Technical data: Cutting length 610 mm 620 mm batch depth Pile height 100 mm Power supply 380V / 50Hz 3 kW power Lodpovfukiofx Ahzshb Weight 700 kg The set includes: spare knife, shaft, operating tools, tapping block, manual.

Condition: good (used), Paper cutting guillotine Ideal 5255 The machine is 100% functional, after inspection in very good condition. This is the currently produced model, the latest model. Technical data: working width: 520mm stack height: 80mm minimum remnant: 35mm max. distance of the saddle from the knife: 520mm 230V power supply Lhsdpfewxtcvex Ahzeb Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with 1/10 mm accuracy electronic handwheel with graduated speed regulation of the rear limiter switching mm/inch Electromechanical knife and pressure beam drive Transparent safety covers laser cutting line two-handed cutting start, electronically controlled automatic knife return from any position Additional equipment includes: spare knife, stick, knife replacement tools including a safe handle, tapping block and documentation.

Condition: good (used), Polar Mohr R-2 Paper Jogger Machine in perfect condition, rarely used. Purchased from a printing house warehouse. Technical data: Max format: 820x720mm Stack height: 150mm Weight: 450kg Power supply: 400V Air table Possibility of jogging to the right/left Lhedpowt Sqbofx Ahzeb Adjustable inclination angle Adjustable jogging frequency (on the inverter) Chrome table surface Pneumatically controlled flaps

Condition: good (used), Wohlenberg 132 TS ASE Paper guillotine Machine in perfect condition, ready for production. Year of manufacture 2015. Available immediately from stock. Equipped with the ASE automatic trim removal system. The guillotine can be used as a stand-alone unit or integrated with cutting systems. Program generation takes place in the menu and includes a variety of cutting tasks, e.g. Single cut, Programming, Multiple cut, Non-cutting pressure, Automatic actual value transfer. Wohlenberg premium cutting machines are manufactured in Solms, Germany. Distinguishing features of the Wohlenberg machine: Lhedpfxjwt Sq Uo Ahzsb – Interactive user interface – 18.4” touch screen – MIS integration (optional) – USB interface – Ethernet interface – Windows CE operating system – CIP data module – Positioning via electronic handwheel – Optimized cutting cycle – Programmable hold-down pressure – Automatic adjustment of the hold-down pressure to the cutting width – Automated knife change from the front – Quick knife change – New machine body cast in one piece = higher stability – Maintenance-free electromagnetic clutch Technical data: Cutting length: 1320 mm Maximum stack height: 165 mm Infeed depth: 1325 mm Smallest cut with sheet metal under the pressure beam: 77 mm Smallest cut without sheet metal under the pressure beam: 20 mm Maximum saddle feed speed: 300 mm/s Maximum mechanical efficiency of the knife: 44 cycles/min Saddle guidance: above the work table Main engine power: 4.5kW Net weight: 3410 kg The machine is equipped with a spare knife, sticks, a pressure plate, documentation, tools, and a conveyor belt.

Condition: good (used), Paper cutting guillotine Ideal 6660 The machine is 100% functional, after inspection like new. This is currently produced, the newest model. A spare knife included. Technical data: working width: 650mm stack height: 80mm minimum remnant: 25mm max. distance of the saddle from the knife: 610mm 230V power supply Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with 1/10 mm accuracy electronic handwheel with graduated speed regulation of the rear limiter switching mm/inch Electromagnetic knife and pressure beam drive Photocells laser cutting line two-handed cutting start, electronically controlled automatic knife return from any position Ljdpfx Aewud R Njhzehb Additional equipment includes: spare knife, stick, knife replacement tools including a safe handle, tapping block and documentation.

Condition: good (used), Polar Mohr 115 XT Paper Cutting Guillotine This machine is in very good condition, ready for production, after a service inspection. Low mileage. Year of manufacture: 2010. This is the most valued guillotine brand, a flagship product. A jogging and elevator are available for retrofitting. Technical specifications: Cutting width: 1150mm Stack height: 165mm Programmer with a 15″ color touchscreen display Air table Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Enlarged side tables Lodpjxzumxjfx Ahzshb Knife change via the control panel Additional rear table guards Weight: 3200kg 380V power supply Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine.

Condition: good (used), Paper guillotine EBA 5260 The machine is 100% functional, after inspection in very good condition. This is the currently produced, newest model. Technical data: working width: 520mm stack height: 80mm minimum remnant: 35mm Ledevbb Rhopfx Ahzohb max. distance of the saddle from the knife: 520mm 230V power supply Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with 1/10 mm accuracy electronic handwheel with graduated speed regulation of the rear limiter switching mm/inch Electromagnetic knife and pressure beam drive Photocells laser cutting line two-handed cutting start, electronically controlled automatic knife return from any position Additional equipment includes: spare knife, stick, knife replacement tools including a safe handle, tapping block and documentation.

Condition: good (used), EBA 721-06 LT Paper Cutting Guillotine The machine has been serviced and is ready for operation. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine, with a 721 mm knife length, is equipped with infrared safety curtains, a hydraulic pressure device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable timer and electronic saddle position readout with an accuracy of 1/10 mm. The machine’s main work table is made of stainless steel with a blower. Technical data: Cutting length 721 mm Infeed height 78-80 mm Infeed depth 720 mm Power supply 400 V Weight 620 kg Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator, Air table (on front and rear tables), Pedal for pre-marking the cutting line using the clamp or optical cutting indicator, Solid, adjustable steel knife carrier, Blade made of high-quality HSS steel. Ljdpfxjx A Sdds Ahzshb Safety features include: „Safety curtain” – a photocell in the front table, Transparent safety cover on the rear table, Safe drive – IDEAL patent, Electronically controlled two-handed cutting start, Automatic knife return from any position, Main switch equipped with a key switch. Key-operated Knife replacement possible with the blade permanently covered The set includes: a safety knife change tool, operating tools, a paper tapping tool, and a spare knife.

Condition: good (used), Durselen PB 16A four-head paper drill The device is in perfect condition, like new! Ledpfou A Rr Ijx Ahzjhb This is the newest one. currently produced model. Production Germany. Four drilling heads with adjustable spacing. The machine has a pneumatic drill cooling system. Sliding work table. Automatic column system – a belt that is moved to the next position when worn out Technical data: Drill diameter: 2-16 mm, Stack height: 50 mm, weight: 300 kg Power supply 380V Automatic drilling cycle, controlled by a foot pedal. Smooth regulation of spindle speed and lowering speed of heads on inverters. Solid construction on a pedestal. Waste is directed to the built-in bin Drill table adjustable in every plane, front and side margins. The set includes operating tools and drills.

Condition: good (used), Durselen Corta PB-01 STE Automatic paper drill Lsdsu Ul Hnopfx Ahzjhb The device is in very good condition, ready to work. This is one of the newest Durselen models, the most advanced model. Production Germany. 6 drilling heads with adjustable spacing. The machine has a pneumatic drill cooling system and lubrication. A programmer for controlling the table that allows you to approach programmed distances. Smooth regulation of spindle speeds and smooth regulation of the speed of lowering the heads. Waste disposal compressor Sliding column system on a tape. Technical data: Drill diameter: 2-10 mm, Stack height: 60 mm, weight: 400 kg Power supply 380V Automatic drilling cycle, controlled by a foot pedal. Solid construction on a pedestal. Waste is directed to the external pocket. The set includes operating tools, instructions, drills and sharpener.