Used Partition With Door for sale (11,723)

Condition: good (used), Total height: 3300 mm Boom height: 3100 mm Gkjdpfx Abstxycnj Usf Boom length: 3250 mm Usable working length: 2750 mm Load capacity: 125 kg

Year of construction: 2009, condition: ready for operation (used), LAMINATING MACHINE FOR DOORS IPS MOD. PC-2500-SCBP Machine for the application of adhesive protective film on flat surfaces. Equipped with motorized feed with rollers and automatic cutting system. Machine for fixed height table line +/- 900 mm. Year 2009. Top and bottom gluing at the same time. TECHNICAL CHARACTERISTICS OF THE MACHINE - MINIMUM / MAXIMUM WORKING THICKNESS 15 / 50 MM - MAXIMUM WORKING WIDTH 2.400 MM - HEIGHT OF THE ROLLERS ADJUSTABLE TO THE FLOOR 840 / 950 MM Gedpehkr Ansfx Ab Uokf - TOTAL POWER CONSUMPTION 3 KW - MINIMUM AIR PRESSURE REQUIRED 6 BAR - VOLTAGE ELECTRICAL INSTALLATION 220 V - 380 V

Year of construction: 1998, condition: used, machine/vehicle number: MBMAKZDoppel, 1 piece - Demag chain hoist Crane hoist 250Kg DKUND 2-250 K V1 with double chain 125Kg payload each 10 pieces are available 250KG / 0.25t payload / lifting capacity - 1 fall Distance between the two lifting chains variable 20-120cm, lifting height approx. 3m Without frame, only the chain hoist with both deflection rollers including the blue mounting plates is sold Weight complete approx. 50 kg, connection to 400V 50Hz Gsdpjtn Ritsfx Ab Ujkf TOP condition, fully functional. Not a worn or used device! Connect and put into operation. Comes from current operation Item location is 75053 Gondelsheim See pictures

Condition: used, Year of construction: 2012, Integrated NC machining center for windows and doors composed of: A) Automatic loader mod. "SP" Automatic loader for Base SP N. 1 moulder -Automatic loader consisting of: -Table with motorized belts -Automatic device for moving pieces from the buffer to the loading surface of the moulder * Piece length min: 450 mm max: 3200 mm * Piece width min: 40 mm max: 230 mm * Piece thickness min: 40 mm max: 120 mm * Work cycles 10/min * Chain advancement speed on the table: 7 m/min * Loading table dimensions 2800 x 2150 mm B) Automatic moulder mod. SUPERSET NT C 6 Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Group for slat recovery 2500 mm entry level Speed 6-36 m/min via inverter No. 1 - engine power 5.5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit located before the planer shaft Tandem advance group in front of the right vertical with rapid exclusion Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm Input guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Setup for in-line integration with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at entrance - piece counting Independent electrical panel POS. 1 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET quick tool locking -allows tool locking/unlocking with the simple use of a compressed air gun POS. 2 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic vertical positioning POS. 3 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic horizontal positioning POS. 4 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Electronic vertical positioning POS. 5 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking POS. 6 Glass bead recovery group Comprehends: PRL allows the automatic transition from planing to function recovery of the glazing bead and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning Gkjdpeixxwmefx Ab Ujf - hardware and PLC modifications for axis management - tandem exit and modified hood second advancing group after the universal C) Connection transfer Transfer for receiving pieces from the moulder and automatic insertion into the Sott

Condition: used, SECOND-HAND WORKING CENTER FOR DOORS AND WINDOWS SAOMAD OPERATOR 8 - CE RULES Butting disk saw: - Motor power Hp 4 - Saw shaft revolution speed 3000 rpm - Disk saw diam. 400 mm. Tenoning side - Min. work piece lenght mm. 200 - Max. work piece lenght mm. 2800 - Min/max. work piece thickness mm. 30/120 - N. 2 shafts Sash profiling - Motor power Hp 0 - N. 4 shafts Gedpfx Aewrb Tvsb Ujkf Glass stop recovery Hardware grooving unit Roller advance Wooden piece return roller Max. feeding speed 20 m/min - Year 2000

Condition: like new (used), Year of construction: 2022, functionality: unexamined, machine/vehicle number: YF-240, type of input current: AC, Equipment: documentation/manual, In 2022 we purchased a new line, but the business direction changed and the line was never unpacked from the containers. The line is stored in 40HQ*3pcs container and in one 20GP container. Production capacity:220-300kg/hour Godpoxb R Aijfx Ab Ujkf WPC production line is applied to produce wood plastic composite products, like WPC decking, WPC door frames, WPC skirting and so on. by changing screw barrel and molds, it can produce both PE PP type WPC products and PVC type WPC products. features of wpc production line: - adopts double step production, first compounding & granulating, then extrusion - adopts bimetallic screw barrel, high hardness, more wearable - adopts parallel twin screw extruder for compounding & pelletizing, good exhausting effect, better plasticizing effect Please view all the technical specification in attachments.

Condition: good (used), Total height: 3300 mm Boom height: 3100 mm Boom length: 3250 mm Usable working length: 2400 mm Load capacity: 125 kg Gedpfxotxya Ho Ab Ujkf

Condition: excellent (used), Year of construction: 2015, COMEC MD JAMB 9X - Year 2015 MULTI-HEAD CENTRE FOR CUTTING, DRILLING, MILLING WITH CONTROLLED AXIS FOR ANY TYPE OF DOORFRAMES ALSO DIN ADJUSTABLE EQUIPED WITH AUTOMATIC UNLOADING CONVEYOR - machine can work without loading breaks , while element is during unloading the operator is ready and awaiting to load next element, efficeincy is over 30% higher MAIN STRUCTURE Heavy duty mono-block frame with electro-welded steel sheets.. Nominal working runs (max pieces’ measures): Axis X 2500 mm - Axis Y 350 mm - Axis Z 112 mm OPERATING HEADS n° 3 left / central / right independent operating heads controlled by CN. - Left and right heads: 1+1 cutting/drilling units. Automatic/pneumatic inclination of saw blades/drills groups from touch screen. - Central head: Horizontal units: 2 counter- rotating horizontal electro-spindle for milling; 1 milling, mortising electro-spindle. Special sleeve to carry out slots on the lower side. Vertical unit: 1 vertical electro-spindle for milling; 1 vertical electro-spindle, dedicated to drill the seats for metallic clips. 1 vertical electro-spindle with special drilling head, 5 drills at 90° * LOCKING BENCHES Special benches for completely assembled door jamb loading. Pieces’ holding bench divided into 4 elements adjustable on guides with balls rail system, automatic locking/unlocking and position made by central head (CNC control). PROTECTION Perimetrical protection cabin. According to CE safety prescriptions. Working shavings evacuation belt. CONTROL UNIT SOFTWARE NC CAM SUITE composed by: CAD/CAM TPAED132 – three-dimensional read-out of the piece with programmed workings operations. Complete with movements optimiser and dedicated post processor. Gkjdpfxouwlvkj Ab Uof Multitasking: the control unit can independently control the 3 heads on the 3 axes in order to have different workings operations at the same time (equal or different) Remote console for the machine testing and set-up by the operator

Condition: excellent (used), Year of construction: 2005, I sell the 4-Side brushing machine suitable for windows, doors, tables, etc. Futura MS120 Y1 X2, year 2005 Working width 1200mm Working height 200mm Total weight 2500kg Configuration: Side brushing heads left - right H.170mm 2 bottom heads left - right Nylon W.140mm Oscillating top head W.260mm Big brushing heads top - bottom W.1150mm Gksdped Raqksfx Ab Usf Machine equipped with heads on the pictures. Available immediately.

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: 0460013, We sell a Revent 4 doors proofer for 8 racks, model:PB06/1Xeb10, MFG 2009, excellent condition. The profer is dismantled properly and has a montage schema. Made in Sweden Voltage: 3 Ph 380-400 V + N+ PE 50 Hz; Total load 10,5-11,5 kW Heat capacity 10-11 kW Gkjdpfswh Unxsx Ab Uof Rated current 17-17,8 A Total weight dismantled with the stainless steel floor approx. 600 kg. Price Euro 3.200 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, functionality: fully functional, Year of construction: 1999, COMPLETE PVC WINDOW PRODUCTION LINE FOR SALE MACHINES ARE IN OPERATION AND CAN BE TESTED ON SITE 1. WEGOMA SUPERCUT 3000 CUTTING & PROCESSING CENTER + additional reinforcement unit Automatic PVC profile cutting and processing center, multifunctional unit, operated via computer with cut optimization software. Gkjdpexbqdmofx Ab Uef Processing capacity: approx. 240 units in 8 hours, Year of manufacture: 1999 2. URBAN AKS 4410 VERTICAL FOUR-HEAD WELDING MACHINE FOR PVC PROFILES Vertical automatic machine for simultaneous welding of four corners. 3. URBAN SV503 PVC WINDOW CLEANING MACHINE WITH WT550 HANDLING TABLE Specialized for reliable cleaning of weld seams, year of manufacture 1991.

Condition: new, Year of construction: 2025, Versatile vertical refrigerated display cases for medium temperature applications, available with plug-in or remote cooling systems. An adaptable solution ideal for any retail environment. Dimensions (mm): Length: 1875 Gsdpfx Ajxbq Dajb Ujkf Depth: 660 Height: 2100 Discover our wide selection of refrigerated display cases, featuring multiple sizes and models to suit every retail environment.

Condition: good (used), Total height: 3300 mm Gkodstxpknjpfx Ab Usf Boom height: 3100 mm Boom length: 3250 mm Usable working length: 2750 mm Load capacity: 125 kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, We have a production line for UPVC profiles, they were purchased in 2010, they have only operated for 2 years, and now they are for sale because the company that had them has now closed. They were serviced before being stored. The machines are in Patras, Greece. Any operational check is welcome. Gksdpfxswyvh Ro Ab Usf (1) Aluminium and UPVC end milling machine OMC Maxima, (new never connect) (2) CNC automatic line UPVC CNC corner cleaning machine with 4 head horizontal welder - RISUS, RKT-8000 (3) UPVC bead saw - RISUS, RK-1080 (4) UPVC 4 Head vertical welder - HAYA, (5) UPVC 4 Head corner cleaning machine semi-automatic - WEGOMA, WPA4 (6) Single Head multiple corners welder machine -RISUS, RYL-1050 (7) UPVC profile Hot air bender /CBM, (8) 4 Machine benches, (9) ACCESSORIES SMALL TOOLS AND DIES (milling cutters for the machines, chisel etc.). There are spare parts available , as well as technical assistance, if needed. The selling price for all these machines together is at least 50,000 Euros plus VAT, if necessary. They do not sell independently. Collection from Patras, Greece (we have a fork lift truck to help if need)

Condition: good (used), Total height: 3300 mm Outrigger height: 3100 mm Boom length: 3250 mm Godpfx Abetxphaj Ujkf Usable working length: 2750 mm Load capacity: 125 kg

Condition: used, I-beam length: 4500 mm Total height: 3350 mm Usable working length: 4000 mm Hook height: 2300 mm Godpfxev Tm Dqs Ab Uekf Distance between legs: 2900 mm

Condition: used, Load capacity: 990 kg Beam length: 7880 mm Effective length of the beam: 7480 mm Lifting core: 5700 mm Gkodpfxjvgw Rue Ab Uof Without sidecar!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 41,657 h, controller model: SINUMERIK 840 D SL, laser power: 5,000 W, working length: 3,000 mm, working width: 1,500 mm, TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 116 mm Laser power: 5,000 W MACHINE DETAILS Control: SINUMERIK 840 D SL Operating hours Total operating hours: 67,508 h Laser on hours: 41,657 h Current laser output (as of 27.04.2023): 5,335 W EQUIPMENT Gsdpfex A Hagsx Ab Uekf Torque drive in combination with linear direct drives Enclosed beam guidance via laser light cable (LLK) Machine cooling unit (water-air) Integrated control cabinets with internal lighting Automatic pallet changer (longitudinal direction) 17" touch colour display Wide longitudinal conveyor belt TruDisk power supply via the machine Workspace illumination Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Solid-state laser TruDisk 3001 with 1 LLK output LLK according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Universal cutting unit with fully adaptive lens system Cutting head strategy Protective glass against lens contamination Condition monitoring of protective glass ControlLine: height control and sheet outer edge detection Simple shop programming Extended shop programming Fast re-production Integrated technology data Automatic shut-off Programmable cutting gas / pressure selection FastLine FlyLine AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact dust extraction system Machine enclosure, certified viewing window, right-hand door Electric roller roof

Condition: used, Used Morton model FKM600D 321 stainless steel contact parts ploughshare mixer. Material: 321 Stainless steel Capacity: 600 litre total capacity. 200-420 litre working capacity (Product Dependent) Container Dimensions: 790mm diameter x 1240mm long Discharge Type: 300mm x 240mm centre bottom outlet with pneumatically operated valve. Type Of Blades: 321 stainless steel ploughshare blades Motor: 37kw, 1500rpm, 3/50 motor with Flender gearbox giving reduction ratio of 14:1. Unit includes: provision for 2 choppers. Gkodpfxjx Db I Ie Ab Uef - x2 400mm x 450mm side access doors. - Mounted on a mild steel frame A video of this mixer is available below. Specifications: Bowl Volume: 158.5 gal Motor Power: 37 hp Material Of Construction: 321 Stainless Steel Choppers (Y/N): Yes Number Of Choppers (1-10): 2 Revolutions Per Minute: 1500 Dimensions: 790mm diameter x 1240mm long

Condition: excellent (used), Year of construction: 2014, Wheelabrator TTX2 Dry Blasting Line With Siemens Simatic Touchscreen PLC Gsdpfxsx Ah Dgj Ab Uskf Semi-Automated Abrasive Blast Cell With Cyclone & Extraction System. Donaldson Torit DCE Extractor. Cyclone. YOM: 2014. S/No. 602498. Included with The Purchase Of The Machine is An Upgrade Package Purchased In 2020 But Not Fitted That Includes: Media Dosage System, Automatic Media Refill, Dust Collector Bag Weight Monitoring, Cyclone Replacement, Additional Maintenance Platform, Additional Blowoff Air Nozzle, Machine ‘Self-Cleaning’ System, Removable Door Ledge, Media Sampling System Upgrades, Improved Door Opening System. With Spare (New) Cyclone and Extractor. BIDDING NOTE: All Top Closing Bids received either through Auction or via Make Offer function will be presented to Rolls Royce for final approval. Buyers will be notified by email and/or by Invoice if their bid is successful. COLLECTION NOTE: Due to Rolls Royce Company Policy, ONLY Approved Removal Contractors are Permitted to Operate on this Site. Please See Collection Details for Contact Information.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 32664, collet bore: 40 mm, saw blade diameter: 220 mm, main saw diameter: 220 mm, overall weight: 1,200 kg, table length: 5,000 mm, positioning accuracy: 0.1 mm, table width: 250 mm, working range: 250 mm, pressure: 6 bar, type of input current: three-phase, total width: 250 mm, cutting width (max.): 250 mm, compressed air connection: 6 bar, cutting diameter: 220 mm, extraction nozzle diameter: 120 mm, working height: 30 mm, Friulmac Randomat E 001 Serial No: 32644 Year 2001 in excellent condition specially made for End Matching all type of wood flooring. Gkodpfxjx Ec Hne Ab Usf Fitted with a Sound & Safety Enclosure with front sliding doors and an entrance door at each end. 2 x 4kw motors do the cutting of the tongue & groove. Will machine random or fixed lengths from 250m/m up to 6m. long. 5m. Long Infeed Belt Conveyor, and a 5m. Long Outfeed Belt Conveyor.

Condition: good (used), mileage: 135,202 km, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,500 mm, first registration: 02/2016, loading space length: 2,590 mm, loading space width: 1,660 mm, loading space height: 1,380 mm, emission class: euro5, color: black, driver cabin: day cab, tire size: 235/50R18, number of seats: 3, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, cruise control, navigation system, traction control, trailer coupling, = Additional Options and Accessories = - Electric windows - Electric mirrors - None - Alloy wheels - Partition wall = Notes = Configuration: 4x2, Payload: 1,299 kg, Unladen weight: 1,711 kg, Gross vehicle weight: 3,010 kg, Unbraked towing capacity: 750 kg, Braked towing capacity (center axle): 2,000 kg, Towbar, Alloy wheels, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 5, Parking sensors (rear), Electric windows, Electric mirrors, Partition wall, Radio/cassette, GPS navigation, Color: Black, Metallic, Heated mirrors, Lighting type: Halogen, Bluetooth, Engine output: 103 kW (138 hp), Fuel type: Diesel, Emission standard: Euro 5, Drive system: Timing chain, Transmission: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Side wall cladding, Roof rack: None, Side doors: 1, Rear door lock: Double door, Central locking, Number of seats: 3, Seating configuration: 1+2, Seat upholstery: Fabric, Seat adjustment: Manual, Spare wheel, Spare wheel tread: 3%, Tire type: All-season tires = Further Information = General Information Number of doors: 1 Registration number: VT-981-R Gearbox Transmission: 6-speed, manual gearbox Axle Configuration Tire size: 235/50R18 Brakes: Disc brakes Suspension: Coil spring suspension Gkedjx Hpatepfx Ab Uof Axle 1: Tire tread left: 6 mm; Tire tread right: 6 mm Axle 2: Tire tread left: 4 mm; Tire tread right: 3 mm Dimensions Dimensions (L x W x H): 548 x 190 x 193 cm Weights Unladen weight: 1,711 kg Payload: 1,299 kg Gross vehicle weight: 3,010 kg Functional Load platform height: 62 cm Maintenance APK (periodic technical inspection): valid until 10/2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1

Condition: used, Kompleksowo przetestowany i odnowiony, używany mieszalnik lemieszowy produkcji Morton model FKM600 ze stali kwasoodpornej. Posiada płaszcz grzewczo-chłodzący. Producent: Morton Materiał: Stal kwasoodporna Płaszcz grzewczy: Stal kwasoodporna, ciśnienie robocze 5,5 bar / 162°C Pojemność: robocza w zakresie 150-450 l, całkowita 600 l. Rozładunek: Pneumatycznie sterowane dolne drzwi typu "bomb door". Mieszadło: Wał ze stali ko z lemieszami typu "Becker-shovel" Napęd: Silnik el. 22 kW z przekładnią Dodatkowo: Możliwość założenia dwóch bocznych mieszadeł intensywnych (chopperow) (obecnie brak tego wyposażenia). Specifications: Gedpfx Abexyxlve Uekf Bowl Volume: 158.5 gal Motor Power: 29.5 hp Material Of Construction: Stainless Steel Choppers (Y/N): N Number Of Choppers (1-10): 0 HP Of Unit: 29.502 Jacket (Y/N): Y Jacket Pressure: 5.5 Jacket Temperature: 162

Condition: good (used), mileage: 114,644 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 4,330 mm, first registration: 05/2022, loading space length: 4,410 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, emission class: euro6, color: black, driver cabin: day cab, suspension: steel, tire size: 235/65R16, number of seats: 3, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, cruise control, navigation system, traction control, trailer coupling, = Further Options and Accessories = Gksdpsx Hn Uvsfx Ab Usf - Electric window lifters - Electric mirrors - None - Partition wall = Notes = Configuration: 4x2, Unladen weight: 2,516 kg, Gross weight: 3,500 kg, Towbar, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: None, Electric window lifters, Electric mirrors, Partition wall, Radio/Cassette, Carplay, GPS navigation, Colour: Anthracite, Metallic, Heated mirrors, Reversing camera, Lighting type: Halogen lamp, Lane keeping assist, Air conditioning, Bluetooth, Engine power: 110 kW (148 HP), Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: additionally raised and extended, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Seats: 3, Seat arrangement: 1+2, Seat covering: Imitation leather, Seat adjustment: Manual, L3H2 Mbux + Navi Automatic Airco Camera 3-Seater/ Leather 1st Owner Euro6!, Spare wheel, Spare wheel tread: 4%, Tyre type: All-season tyres = Further Information = General Information Number of doors: 1 Registration number: KLEYN1 Axle Configuration Tyre size: 235/65R16 Brakes: Disc brakes Suspension: Leaf suspension Axle 1: Tread left: 4 mm; Tread right: 6 mm Axle 2: Tread left: 5 mm; Tread right: 5 mm Dimensions Dimensions (L x W x H): 700 x 200 x 270 cm Weights Unladen weight: 2,516 kg Payload: 984 kg GVW: 3,500 kg Functional Load floor height: 72 cm Maintenance APK (General Technical Inspection): valid until 05/2026 Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Financial Information Lease price: €463 per month (panel van, 72 months); Please ask for further information and conditions

Condition: used, Comprehensively tested, used Lodige Model KM 600D-3ZMZ 321 stainless steel continuous jacketed ploughshare mixer. Manufacturer: Lodige Material: Stainless steel Capacity: 300 litre working capacity. 600 litre total capacity (product dependent) Mixing trough: 630 mm diameter X 2000 mm long Godpexw Tc Dsfx Ab Uskf Discharge Type: electrically driven Weir plate discharge direct driven by motor and gearbox Type Of Blades: Stainless steel ploughshare blades Motor: 15 kW 380 volt 3/50 1500 rpm motor and sew type R100P gearbox. Also includes: carbon steel jacket 85 litre capacity rated 5 bar design pressure at 158°C - (3) stainless steel multiple blade choppers direct driven by 5.5 kW 380 volt 3/50 3000 rpm motors - (2) side inspection doors. - mounted on mild steel support frame with (4) wheels. - Throughput performance approximately 18 cubic meter/hour with 1 minute residence time. A video of this mixer is available below. Specifications: Bowl Volume: 158.5 gal Motor Power: 15 hp Material Of Construction: Stainless Steel Choppers (Y/N): Yes Number Of Choppers (1-10): 3 Horsepower Of Choppers: 5.5 RPM Of Choppers: 3000 HP Of Unit: 15 Revolutions Per Minute: 1500 Jacket (Y/N): Yes Jacket Pressure: 5 Jacket Temperature: 158