Used Close Frame for sale (11,553)

Condition: new, 2 Storey R-Linear Steel Frame Houses Insulated Nwodow R Tk Aepfx Ah Sen PVC Windows Throughout Boiler, Fridge, Cooker, Bathroom All New - Never Lived In Dimensions: 5m x 9.5m x 3m Weight: 12 tonnes

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm Nwjdpfx Ajcmat Uoh Sjn the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 15914, PRESS RUNNER MACHINE TYPE: EPT63 YEAR BUILT: 1999 MACHINE NUMBER:15914 MACHINE DATA Nwsderypfyspfx Ah Sjn Pressing force: 630 KN Idle noise: 69.2 dB Drive power: 22+4 KW Cooling: Type air TYPE OEKA-R4/1.0 Operating pressure: 260 bar Oil quantity: 285 liters. Weight: 6000kg TRAVEL DISTANCE MEASUREMENT: Overtravel: 20mm Follow-up time: 90ms Safety distance: 180mm DIMENSIONS: Installation height max: 600mm Ram stroke max: 400mm Throat: 280mm Table height: 850mm Table width: 630mm Table depth: 500mm

Condition: ready for operation (used), 6-kolomspers met 4 hydraulische zuigers opwaartse slag diameter van de zuiger: 450 mm slag: 550 mm Maximale kracht van 2000 ton max opening zonder verwarmde tafels: 780 mm max opening met verwarmde tafels: 655 mm Verwarmde tafels met stoom of olie Maximale temperatuur: 300° C Totale oppervlakte: 2000 x 2000 mm Twee tafels van 2000 x 1000 mm (kunnen samen of apart gebruikt worden) 2x 11 kW hydraulisch vermogen Nwjdpfjv Rwftex Ah Sjn met invoerroltafel: 4260 x 1550 x 1250 mm Olietank op platform: 2000 x 2000 x 2500 mm Totale hoogte van de pers: 3600 mm De pers zit 920 mm in de grond Werkhoogte is 750 mm Toepassingen: - composietmateriaal - vulkaniseren - buigen / strekken

Condition: used, tank capacity: 160 l, GENERAL Design: suspended Remarks: Suspended design in a tiltable frame made of V2A; without bottom outlet; top opening diameter approx. 700 mm (tapering towards the bottom; see photos) Total height: 1,100 mm Heating/Cooling: available Nwodpfsxqduqjx Ah Ssn Top: open with loose lid Stand type: frame Location: Bremen Nameplate: Volume: 160 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: used HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Outlet: not available MATERIAL SPECIFICATION Temperature system material: V2A 1.4301 (AISI304)

Year of construction: 1980, condition: used, passage width 560 mm Njdpfxjcvhnde Ah Sown passage height 560 mm stroke 600 mm Speed max. 320 1/ min. The creel is completely mechanized with new Moehringer high speed infeed.

Condition: used, Used machine Features and technical data: Working width: 300 mm Sanding belt oscillation: mechanical Roller guide: rubber-coated Sanding unit: with sanding shoe Feed speed: 2-stage Feed direction: reversible (forward/reverse) Motor start: star-delta Nedpfxjxq Ua Ro Ah Sewn Power supply: 380 V Weight: approx. 450 kg Availability: short-term Location: Baden-Württemberg

Condition: used, Year of construction: 2012, total height: 1,450 mm, total length: 1,200 mm, total width: 800 mm, Type of fuel: Electric Drive: motorised Empty weight: 596 kg - Drive: Elektric - Year: 2012 Njdpowtm H Rofx Ah Sswn - Documentation available: No - Serial number: ME000659 - Type: Attachment - Transport dimensions: 1200mm x 800mm x 1450mm (l x w x h) - Transport weight [kg]: 596kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Year of construction: 2025, condition: new, Big Bag rack Cross beam for Big Bag for forklift/crane Pneumatic discharge Aluminum container for material collection Nwodpfxsxnbk Dj Ah Sen With sieve and suction connection with filter

Condition: new, Bernardo Frame Press HRP 3000 Nwedpfxsxrnvbe Ah Son Robust and torsion-resistant hydraulic frame press with high-quality pressure cylinders. Whether it is used for furniture or door production, block or frame gluing, the high pressing force of 2,000 kg per cylinder and precise, angle-accurate pressing of large-sized components enable all tasks to be carried out effortlessly. Technical Specifications Working length: 2,400 mm Working height: 1,550 mm Cylinder stroke: 95 mm Pressing force: 2,000 kg Vertical hole pitch: 50 mm Horizontal hole pitch: 160 mm Overall length: 3,250 mm Overall height: 2,070 mm Frame depth: 925 mm Weight: approx. 315 kg Features • Versatile use, e.g. for frame, window, and door production • Robust frame press with solid steel construction • Centralized control of the hydraulic cylinders including pressure gauge • Efficient gluing thanks to hydraulic design • Pressure cylinders equipped with rocker plates as standard Scope of Delivery • 4 movable pressure beams, each with one vertical hydraulic cylinder and counter support • 1 movable pressure beam with two horizontal hydraulic cylinders • 1 movable, adjustable pressure yoke

Condition: used, tank capacity: 8,651 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: Support ring made of Fe; manway diameter approx. 480 mm; total height incl. agitator gearbox (without gearbox approx. 3500 mm); Speed: 26.5 / 118 rpm Internal diameter: 2,000 mm Total height: 4,550 mm Heating/Cooling: present Power: 5 / 15 kW Max. allowable operating temperature: 220 °C Max. allowable operating overpressure: 20.0 bar Max. overpressure: 6.0 bar Agitator: beam agitator Support type: ring Location: Bremen Technical documentation: Drawing Nwodpfjxqavdjx Ah Sen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 8,651 liters Jacket volume: 313.0 liters Cylinder wall thickness: 8 mm Product-contact material: V2A 1.4541 (AISI321) Condition: used Last application: chemicals VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Max. allowable operating vacuum jacket / pipe space / bar: 1.0 bar Bottom temperature control: half-pipe coil EQUIPMENT Manway / dome: in the top head Outlet (alternative entry): 105 mm Remark: Motor missing, manway cover plated MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI316) Flange material: steel AGITATOR Agitator arrangement: centrally in top head Agitator equipment: Agitator type: frame blade agitator; agitator motor missing, but available from manufacturer; various agitator documents available TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Top head wall thickness: 14 mm

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) Nwjdpfxoxdttij Ah Ssn • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 1683, overall weight: 400 kg, table length: 440 mm, table width: 420 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to the closure of a business. Placing a bid obligates timely collection between 26/01/2026 and 29/01/2026! Nedpexqnq Aofx Ah Sewn TECHNICAL DETAILS Table dimensions: 440 x 420 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 800 x 600 x 1,900 mm Weight: 400 kg

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Artos Latex Line Hermosa Year of construction: 2000-2021 Working width: 1 meter to 2.6 meters Nodpsxp Siyofx Ah Sjwn Maximum setting width: 2.75 meters Speed: 1.7 meters to 35 meters per minute

Condition: good (used), NNP Nwsdpfsqqhqnjx Ah Sen IBC tilting frame Stainless, IBC Tilting frame, pneumatic lifting, for discharge

Condition: new, color: other, Year of construction: 2021, Year of manufacture: 2021 Empty weight: 180 kg Dimensions (LxBxH): 164 x 136 x 132 cm Lifting capacity: 2.400 kg CE mark: yes General condition: very good Technical condition: very good Visual appearance: very good Nwodpfx Ahoxn Szaj Sjn Condition CE type: CE

Condition: used, tank capacity: 8,609 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Support ring made of Fe; manway diameter approx. 480 mm; internal vessel with signs of corrosion (see photos); total height incl. agitator gearbox (approx. 3,400 mm without gearbox); Speed: 52 / 104 rpm Internal diameter: 2,000 mm Total height: 4,950 mm Heating/cooling: available Max. allowable operating temperature: 220°C Max. allowable operating pressure: 20.0 bar Max. overpressure: 6.0 bar Top head: Removable/openable top cover Agitator: Paddle agitator Nsdoxqau Topfx Ah Sjwn Base type: Ring Location: Bremen Technical documentation: Drawing Jacketed cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 8,609 liters Jacket volume: 313.0 liters Cylinder wall thickness: 8 mm Product-contact material: V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 2,190 mm Last application: Chemical VESSEL Max. vessel operating temperature / °C: 200°C HEATING/COOLING JACKET Max. allowed operating vacuum double jacket / pipe space / bar: 1.0 bar Bottom temperature control: Half-pipe coil EQUIPMENT Manway / dome: in top cover Outlet (alternative entry): 100 mm Note: Motor missing, manway cover missing MATERIAL SPECIFICATION Temperer system material: V4A 1.4571 (AISI316) Flange material: Steel AGITATOR Agitator manufacturer: Ekato Agitator equipment: Agitator type: Paddle frame agitator; Agitator motor missing, but available from manufacturer; various agitator documents available TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Top cover wall thickness: 14 mm

Condition: new, Year of construction: 2025, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Nwsdpfjg U Uv Rjx Ah Son Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: ready for operation (used), total height: 2,110 mm, total width: 2,240 mm, total length: 900 mm, passage width: 1,500 mm, power: 2.2 kW (2.99 HP), empty load weight: 1,250 kg, load capacity: 125,000 kg, width of table: 420 mm movable cylinder electro hydraulic two speed: fast slow Nsdpjxgv Nfjfx Ah Sjwn Max ram adjustment: 400 mm Drawningspeed: fast 9mm/sec - slow 2,5 mm/sec Returningspeed: 12 mm/sec Max distance between table - ram: 925 mm Courant needed: 380/400V

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment. Nedpfx Aexmatnoh Sewn Especially designed for staircase construction, window manufacturing, and versatile applications thanks to pneumatic height adjustment. Angled dowelling and spindle drilling are easily achievable thanks to the swivelling drilling unit. - Motor with pole changing, two speeds - Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm - Motor start via convenient handle switch - Equipped with Röhm two-jaw chuck 1–20 mm - Linear laser for precise workpiece positioning - Drilling unit can swivel 65° left and right - Pneumatic adjustment of machining height; dowelling possible on two levels without resetting - Desired drilling heights can be set for each level via a digital counter; switching is then pneumatic from the front - Cross movement 340 mm, stepless or in 12 mm increments with indexing rail - Pneumatic clamping possible at any position, controllable from the front - Maximum height adjustment approx. 100 mm above table height - Drilling stroke approx. 200 mm - 2 pneumatic workpiece clamps, 1 clamp column repositionable to the front - 2 swivelling workpiece supports - Suction funnel - Center stop + 1 side stop - Fixed mitre stop - Length stop as round bar - Set of drill bits - Operating manual - CE mark - Machine was partially repainted due to existing paint splashes - Pneumatic hoses replaced Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse – see "other offers from this provider."

Condition: used, Year of construction: 1982, Press dimensions: 3500 x 2600 mm Electrohydraulic unit for 4 hinge cup drillings, complete, 4 hinge cup drilling units Left upper corner plate with 2 cross pressure cylinders 4x hydraulic wood holders Intermediate inserts for small pressing with drilling unit Central pressure beam 2600 mm Longitudinal pressure cylinder with counterholder 4x hinge cup drills Storage location: At customer site Nedpfx Ajxftcaeh Sjwn

Condition: used, functionality: unexamined, Maweg Euronova S Hydraulic Frame Clamp Nedpfjw Tm Akox Ah Sown

Condition: used, Single-column hydraulic press SCHULZ Type SES 250 . 04.86.3511/3 Year of manufacture: 1986 Pressing force: 25 tons Return force: 10 tons Throat depth: 360 mm Table size: 600 x 720 mm Ram area: 500 x 500 mm Clear hole in table: Ø 100 mm Clamping pin bore: Ø 40 mm Njdpfx Ahjhl Npqo Sswn Ram stroke: 400 mm Maximum installation height: 600 mm Table height above floor: 935 / 775 mm Hydraulic tank capacity: 380 liters Drive power: 7.5 kW Power connection: 380 Volt, 50 Hz - Adjustable fixed stop in the press cylinder 180 mm, with hand crank adjustment - SICK light barrier - Two-hand operation - Base made of 160 mm U-steel Space requirement (L x W x H): 1900 x 1300 x 3100 / 3260 mm Weight: 3.6 tons Good condition

Condition: new, Year of construction: 2025, For sawing tubes and solid materials made of stainless and tool steelTwo band speeds by means of pole-changing motorRobust gear with hardened and ground shaftPrecise and robust band guides with adjustable carbide platesLonger service life of the saw band due to saw arm inclination of 25°Efficient coolant application to the saw band guidesElectromechanical monitoring of the saw band tension, In case of deviations, a microswitch switches off the machine chip clearing brush for optimum cleaning and maintenance of the saw band function of the semi-automatic machine:Automatic workpiece clamping after the start of the cutting cycleExecution of the saw cut at the selected band speedAutonomous stop of the lowering movement and of the saw band in the lower end positionAutonomous return movement of the saw arm to its upper end positionOperator only has to move the material automaticallyEquipment:Two band speedsCut-off buttonCoolant systemChips clearance brushSaw band tension monitoringSwivelling control panelLength approx.1860 mmWidth/Depth approx.1045 mmHeight approx.1750 mmWeight approx.405 kgPower consumptionPower consumption1.5 kWElectrical dataConnection voltage400 VMachine dataSaw blade speed(s)20 - 100 m/minSpeed steplessSaw blade length2720 mmSaw blade width27 mmSaw blade thickness0,9 mmSaw blade 60 - -45 °Cutting ranges0° round (tube) Nwsdjd Hx Uqepfx Ah Sen

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: HL 2100 4290 0215, Hess Pressen Njdpfxsxqcdwe Ah Sjwn Type: Hydro-LUX Year of manufacture: 1990 Serial No.: HL 2100 4290 0215 380V 2.6 kW