Used Parts Washing Systems for sale (46,948)

Year of construction: 2026, condition: new, Parts cleaning system, spray cleaning system, type L90 Automatically operating hot water parts washing machine with automatic basket drive via geared motor, stainless steel washing pump (manufacturer: Lowara), circulating 3-sided spray system (from below, from the side, and from above) with stainless steel nozzles. - Basket diameter: 790 mm - Usable height: 500 mm - Max. loading weight: 150 kg - Spray pressure: 3 bar - Tank volume: 105 liters - Heating: electrically adjustable (RT - 90°C) System dimensions (L x W x H): 1,150 x 1,250 x 1,900 mm Empty weight: approx. 220 kg Wash cycle timer freely adjustable via Omron timer (minutes and hours) Gkodpfx Aqshgh I Sjiea Complete cleaning machine (internal components and external housing) made of stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking Bath cover with fine filter (2,000 microns) Suction filter as pump protection Operating hour counter Steam extraction including condensate return Preparation for later installation of an oil separator The parts washing machine is in new condition and has never been used. OTHER BASKET DIMENSIONS AVAILABLE UPON REQUEST!!!

Condition: as good as new (ex-display), Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Godpfx Aqsuxuv Aoiska

Year of construction: 2026, condition: new, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Gjdpfx Aofl Ufzjqioka

Condition: new, Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Gkedpfx Ajhl H Ubsqiea

Condition: new, Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Gkodpfxjuxuwae Aqioa

Condition: new, Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Gjdpfx Aondcbyeqiska

Year of construction: 2026, condition: as good as new (ex-display), HD Wash Basin - HD Brush Washing Station The wash basin features an adjustable 60 bar HD pump, which enables cleaning to take place in a closed working area. Cleaning is carried out using an aqueous degreaser (10 kg included in the scope of supply) at approximately 45°C. Viewing window including lighting Media filtration via cartridge filter Convenient operation via foot switch includes turntable Technical data: Working area: 800 x 600 mm Usable height: 400 mm Load capacity: 50 kg Operating pressure: adjustable up to max. 60 bar Pump capacity: 14 l/min Washing temperature: adjustable up to max. 45°C Tank capacity: 100 l Heating power: 3,000 W Total power: 7.0 kW Voltage: 400 V AC 1 P+N+PE; Frequency: 50 Hz Gjdsd H Umropfx Aqiska Machine weight: approx. 140 kg Overall dimensions with open lid: 1,100 x 910 x 2,020 mm

Year of construction: 2026, condition: as good as new (ex-display), Spray cleaning system – parts washing system with a folding door 1-tank design (washing), tank volume: 320 liters Basket: W x D 1,100 x 1,100 mm Usable height: 800 mm Maximum load weight: 700 kg Washing pump pressure: 4.3 bar, pump power: 5.5 kW Heater (electric): 20 kW; heatable up to 80°C Control: Siemens Logo Includes: - Steam extraction and condensate return - Automatic water refill - Automatic chemical dosing (0.8 - 5.5%, adjustable) - Insulation of the entire system - System completely made of stainless steel 1.4301 - Basket frame (removable on one side) Gkodpfxjd Rkmxs Aqioa - 7-day timer for the electric heater - Electric spray lance, h = 450 mm - Preparation for oil separator (electric and mechanical) available New unit; currently used in our technology center for washing tests.

Condition: as good as new (ex-display), Year of construction: 2024, Bath volume: 28 liters Inner tub dimensions: 500 x 290 x 200 mm Device external dimensions: 530 x 325 x 400 mm Weight: 20 kg Ultrasonic frequency: 38 kHz Gksdpfxehma S Rs Aqisa Ultrasonic power eff./max .: 400/800 watts Heating capacity: 1,200 watts Total power consumption: 1,600 watts Sweep: yes

Condition: new, Year of construction: 2026, operating hours: 1 h, Glogar Ultrasonic 1600H Ultrasonic Cleaning Device Tank capacity (max.): 162 liters Basket dimensions (usable): 480 x 525 x 300h mm Tank internal dimensions: 600 x 600 x 450h mm Device external dimensions: 885 x 850 x 936h mm Ultrasonic frequency: 25 / 45 kHz (switchable) Ultrasonic power effective / max.: 2,000 / 8,000 watts Heating power: 7,500 watts Gksdpfxsd Sfqqs Aqisa Sweep: yes Pulse: yes Degassing / Auto-degassing: yes Drain / Diameter: 3/4" Basket load: 50 kg The scope of delivery includes 1 stainless steel basket and 1 noise protection lid. Delivery ex works (FCA), AT-4490 St. Florian near Linz The device is manufactured in Germany! OTHER DEVICE DIMENSIONS AND DESIGNS AVAILABLE UPON REQUEST.

Year of construction: 2025, condition: as good as new (ex-display), The "RH S" spray cleaning system is a compact, space-saving, automatically operated cleaning system that meets high standards regarding cleaning, degreasing, and drying results. The parts can be cleaned with the goods basket in a stationary, pivoting/oscillating, or rotating position. The nozzle system – several nozzle bars on the long sides and end faces – is permanently mounted in the processing chamber. Basket dimensions: L x W x H 470 x 320 x 200 (h) mm 2 baskets can be washed in parallel (simultaneously) Maximum load weight: 100 kg Spray pressure (washing): 4 bar, circulation rate: 360 liters/min. Control system: Siemens S7-1200 with KTP700 touch panel Gsdegrm Dfjpfx Aqieka Includes hot air drying (12 kW) Includes compressed air impulse blow-off Includes steam extraction Includes external cladding made of stainless steel Includes preparation for retrofitting an oil separator Includes bag filter for media maintenance Includes 2 stainless steel goods baskets 470 x 320 x 200h mm System dimensions: L x W x H 1,425 x 1,920 x 1,980 (h) mm Dimensions including the open loading door Connection value (electrical): approx. 25 kW

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, Glogar Ultrasonic 600H Ultrasonic Cleaning Unit Maximum tank capacity: 58 liters Basket dimensions (usable): 400 x 255 x 220h mm Tank internal dimensions: 500 x 330 x 350h mm Unit external dimensions: 670 x 580 x 936h mm Ultrasonic frequency: 25 / 45 kHz (switchable) Effective/maximum ultrasonic power: 900 / 3,600 watts Heating power: 2,800 watts Sweep function: yes Gkedpfx Asfk Tt Isqija Pulse function: yes Degas / Auto-degas: yes Drainage/diameter: 3/4“ Basket load capacity: 25 kg The scope of delivery includes 1 stainless steel basket and 1 noise-reducing lid. Delivery ex works (FCA), AT-4490 St. Florian near Linz The unit is manufactured in Germany! OTHER UNIT DIMENSIONS AND DESIGNS AVAILABLE UPON REQUEST.

Condition: new, Year of construction: 2026, functionality: fully functional, working height: 2,200 mm, BUMEX Sp. z o.o. offers a professional industrial washing system designed for the preparation of components prior to the powder coating process. The equipment has been engineered for demanding industrial environments where washing efficiency, process stability, and long-term durability are essential. The washing system enables effective preparation of steel and aluminum components through a multi-stage cleaning, degreasing and rinsing process. Technical parameters Working chamber dimensions: 1500 × 3200 × 2200 mm Process technology: 3-stage washing process Process tanks The unit is equipped with three process tanks: tank for cleaning / degreasing chemicals tank for rinsing water tank for demineralized water (DEMI water) Tank capacity: 1500 – 2000 liters DEMI water generator The system is equipped with a demineralized water generator, ensuring high-quality final rinsing and optimal surface preparation before powder coating. Heating system The chemical tank is equipped with a heating system for the process liquid. Available heating options: oil heating gas heating electric heating Maximum operating temperature: up to 60°C Machine construction The machine is manufactured entirely from high-quality stainless steel AISI 1.4301, which provides: excellent chemical resistance long service life easy maintenance and cleaning The washer features: very robust industrial construction full thermal insulation of the entire machine to reduce energy losses spray system designed for minimal mixing of process liquids pre-filter for collecting contaminants high washing efficiency Control system The machine is equipped with a fully automatic control system, enabling precise control of: process temperature pump operation washing time sequence of process stages Why choose BUMEX? Our equipment stands out on the market due to: very high manufacturing quality robust industrial construction operational safety complete technical documentation possibility of adapting the equipment to the existing production facility All machines manufactured by BUMEX Sp. z o.o. are CE certified. Additional technological support BUMEX also provides: Godohfv D Sspfx Aqiska powder coating booths dust extraction and filtration systems industrial ventilation systems professional technological consulting Cooperation conditions company transport available (price determined individually) VAT invoices issued short production lead times possibility of manufacturing machines in custom configurations and dimensions

Year of construction: 2023, operating hours: 1 h, condition: new, machine/vehicle number: MANUWASH3128, INTERSONIK Manuwash is perfect solution for manual parts washing. It is safe economic and user friendly. Manuwash can be manufactured with options and dimensions according to your requirements. Ideal for car repair shops and auto repair services. Gedpfx Aod Tg Nnjqioka Please do not hesitate to contact with us for technical details. Please check the attached brochure for other details.

Year of construction: 2023, condition: new, INTERSONIK BOGIE WASHERS are designed for washing huge parts like train bogie. Gsdpfx Aqed I E Raeijka Operating Principle: Parts are loaded to conveyor with a crane or forklift, once the parts are inside the washing cabin spray wash begins. There are multiple stations inside the cabin generally speaking pre-washing, washing, rinsing or pasivation, drying. Washing maching can be designed as continue system or step by step procedure according to your demand. Washing pumps, nozzles and other elements are decided by INTERSONIK Engineers meticulously for perfect results. Ideal for train maintenance. Please check the video and feel free to contact with us for further details.

Year of construction: 2026, condition: new, MDK 3000 brush washing machine with Muser The unwashed fruit is fed into the infeed, then, after a pre-wash, it is cleaned again by another fresh water shower on the conveyor belt. Easy to clean, equipped with durable, food-grade polypropylene/acetal modular belts with steplessly adjustable belt speed in two directions, with two steerable rollers and two fixed rollers, or with anti-vibration feet. Requires minimal maintenance. Technical data: Gjdpfx Ajfd E R Usqioka - Rated capacity: 3000 kg/h - Power consumption: 5 kW, 400 V, 16 A, three-phase - Material: Material no. 1.4301, AISI 304 stainless steel - Dimensions: 4300x1250x2222 mm - Discharge height: 1370 mm - Weight: 420 kg - Washing tank water capacity: 800 L/shift - Water consumption: 100-200 L/h (depending on settings) - Water connection: ¾” quick connector - IP65 electronics - Muser equipped with a durable hammer (also suitable for beets and quinces) - Rasp mill: the rasp mill can be switched off electronically, so the washing machine is also suitable for stone fruit - Equipped with 4 counter-rotating brushes for intensive washing - Rotating paddle that pushes the fruit towards the conveyor belt Optional: - Different screen inserts for the rasp mill: for the desired fineness of fruit and vegetables - Stop ‘n’ Go system – Sensitive sensor, which allows the fruit washing machine as well as any type of Maurer belt press to work in harmony with the washing machine without clogging - Adaptive electric valve - The fresh water jet only works when the conveyor belt is running - Air injection - with nozzles and a fan at the bottom of the tank for intensive washing - Air knife - removes water from the fruit surface, so that less water gets into the final product - Circulation pump with filter - ensures the correct flow in the washing tank

Condition: new, Year of construction: 2025, functionality: fully functional, Rotating basket parts washing machine for washing engine blocks and parts - new machine Technical details: Basket diameter: 900 mm Loading Height: 450 mm Loading Capacity: 300 kg Tank capacity: 80 lt Pump pressure: 2,5 bar Gjdpfx Aqoncfmvoijka Pump power: 3,0 Hp Heater: 7,5 kw Electricity (V/Phase/Hz): 220-380-415/3-1/50-60 Timer: 0 - 90 min. Working temperature: 0-90 C° Packing size:1450x1080x1340 mm Packing weight: 300 kg Main dimensions: W x L x H: 1100 x 1100 x 1150 mm Weight: 350 kg The parts washing machine is also available in larger sizes! Larger machines: AWM1250: With 1150 mm basket diameter and tank capacity 200 lt AWM1500: With 1350 mm basket diameter and tank capacity 300 lt If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Year of construction: 2023, condition: excellent (used), 2023 Vixen Surface Treatments 2 Stage FL250 Industrial Parts Washer Front Pneumatic Vertical Loading Door Dimension W2,690 x H1,910mm. Voltage 400V. S/No. 3177 (2023). Please note a loading charge of £50 + VAT to be added to buyer's invoice. Godpfx Aozt R E Ujqijka With Extractor Fan, Pumps, Filtration, Signal Tower, Loading Trolley, Staging & Wash Gun. Overall Dimensions W3,300 x D4,440 x H2,800mm.

Condition: used, Sporer PCS Aqua Jumbo Iso parts washer or automatic parts cleaning machine for the automatic cleaning and degreasing of workpieces using a heated, aqueous cleaning medium via a spray process. The machine operates as a top-loading unit with a rotating wash basket and is suitable for large and heavy components in workshops, maintenance departments and industry. The Iso version features thermal insulation to reduce energy loss. The pumps are leaking and need to be overhauled or replaced. Technical data: - Basket diameter: 1,100 mm - Usable height: 500 mm - Load capacity: max. 350 kg - Tank capacity: 250 l - Power: 15.4 kW Godpfxszry Dwj Aqioka - Operating temperature: max. 75 °C

Condition: good (used), functionality: fully functional, Used professional Gummi-Mayer parts washer. The unit has barely been used and is in very good, fully functional condition. Please no email inquiries! If you have any questions, we are happy to assist you by phone. Inspection and collection only by prior telephone appointment! Gksdpfx Ajztkafoqioa Subject to changes, prior sale, and errors.

Condition: new, Year of construction: 2026, functionality: fully functional, MP160 Pressure Parts Washer – Precision Cleaning with a Closed-Loop System The MP160 pressure parts washer is a professional machine designed for intensive cleaning of industrial, workshop, and automotive components. The enclosed working cabinet, operating pressure of 5–8 bar, and the ability to heat the detergent to 70°C ensure effective removal of oils, grease, carbon deposits, process residues, and other stubborn contaminants. The closed-loop system allows the cleaning solution to be reused, reducing detergent consumption and helping maintain a cleaner, more organized workplace. The MP160 is ideal for cleaning components with complex shapes, narrow channels, recesses, and other hard-to-reach surfaces. Key Advantages of the MP160 Parts Washer 5–8 bar operating pressure – enables effective removal of stubborn contaminants from components with complex geometries. Detergent heating up to 70°C – improves the effectiveness of the cleaning solution and helps reduce cleaning time. Closed-loop cleaning solution system – reduces detergent consumption and the amount of waste generated during operation. Dual-function cleaning gun – allows the application of cleaning solution with compressed air or blow-off cleaning using compressed air alone. Component drying function – after cleaning, components can be blown dry using compressed air. Operating pressure gauge – allows continuous monitoring of operating pressure. Clear control panel – provides independent control of the power supply and heating system. Steel cabinet construction – designed for regular use in workshops and industrial facilities. Adjustable leveling feet – ensure stable positioning and proper leveling of the workstation. Parts Cleaning Concentrate Included The MP160 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. For the best cleaning results, it is recommended to use an aqueous solution at a temperature of between 40 and 70°C. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Effective Cleaning of Hard-to-Reach Surfaces The pressure spray system allows the cleaning solution to be directed precisely onto contaminated areas. This makes the MP160 suitable for cleaning gaps, recesses, openings, channels, and components with irregular shapes. After cleaning, the operator can switch the gun to compressed-air-only mode. This makes it easier to remove residual cleaning solution from the component's surface and prepare parts for further servicing, inspection, assembly, or refurbishment. Standard Equipment Dual-function gun for spraying cleaning solution and blow-off cleaning with compressed air Cleaning solution heating system Control panel Operating pressure gauge Adjustable stabilizing feet 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Cabinet capacity 160 l Maximum detergent temperature 70°C Gksdpfsztwkdex Aqisa Cleaning solution tank capacity 8–14 l Operating pressure 5–8 bar Overall dimensions 770 × 600 × 1,330 mm Weight 47 kg

Condition: excellent (used), Year of construction: 2001, Industrial parts washer Gkedjurcxdopfx Aqija Fabr.ITS Type: Claener Bj.07.2001 .

Condition: new, Year of construction: 2026, functionality: fully functional, MP160 Cabinet Parts Washer The MP160 Cabinet Parts Washer is a modern cleaning system designed for intensive cleaning of industrial and automotive components in a closed-loop system, using high temperature and pressure. With an operating pressure of 5–8 bar and the ability to heat the cleaning solution up to 70°C, the machine effectively removes carbon deposits, oil, grease, and other stubborn contaminants, even from hard-to-reach areas and components with complex geometries. Key Features of the MP160 Operating pressure: 5–8 bar – ensures effective removal of stubborn contaminants from parts with complex shapes and intricate geometries. Heated cleaning solution up to 70°C – improves detergent performance and reduces cleaning time. Dual-function spray gun – allows operation with compressed air only or with a mixture of air and cleaning fluid, while also enabling efficient drying of cleaned components. User-friendly control panel – provides convenient operation with independent control of the power supply and heating system. Pressure gauge – allows continuous monitoring of operating pressure. Compact steel construction – designed for regular use in workshops, service centers, and industrial facilities. Machine Construction The MP160 is built for intensive operation in workshop and industrial environments. Its compact dimensions of 770 × 600 × 1330 mm allow convenient placement next to the workstation while providing ample space for cleaning small and medium-sized components. The 8–14 L cleaning solution tank enables economical use of detergent. Adjustable leveling feet ensure stable positioning, while the integrated pressure gauge provides constant monitoring of operating pressure. Precision and Performance The MP160 is designed for thorough cleaning of components with complex structures, including turbochargers, valves, covers, housings, and hydraulic components. Its pressurized spray system directs the cleaning solution into narrow gaps, channels, recesses, and other difficult-to-access areas. After the cleaning cycle, components can be blown dry with compressed air, helping remove residual cleaning fluid and preparing parts for assembly, inspection, remanufacturing, or other service operations. Applications The MP160 Cabinet Parts Washer is ideal for: Mechanical workshops Component remanufacturing facilities Service and repair centers Gjdouc Tn Aopfx Aqieka Tool rooms Maintenance departments Manufacturing plants It can be used for cleaning: Turbochargers Valves and valve bodies Covers and housings Engine and transmission components Hydraulic system components Industrial machine parts Workshop tools and equipment Components made of steel, cast iron, and other materials compatible with the selected cleaning agent Standard Equipment Dual-function spray gun for cleaning fluid application and compressed air blow-off Heated cleaning solution system Control panel Operating pressure gauge Adjustable leveling feet Technical Specifications Cabinet Capacity 160 L Maximum Detergent Temperature 70°C Cleaning Solution Tank Capacity 8–14 L Operating Pressure 5–8 bar Dimensions (W × D × H) 770 × 600 × 1330 mm Weight 47 kg

Condition: as good as new (ex-display), Year of construction: 2026, Spray cleaning system – parts washing system – NEW SYSTEM / pilot system Basket useful dimensions: L x W 1,100 x 1,100 mm Useful height: 800 mm Maximum load weight: 700 kg Tank volume: 320 liters, spray pressure: 4.3 bar, can be heated up to 80°C System completely manufactured in stainless steel 1.4301 (AISI 304) System including loading trolley in front of the system Gedpfxjc Udkbo Aqijka Included special equipment: - Steam extraction with condensate return - Automatic water replenishment and level monitoring - Filter unit (coarse filter) in the return line - Preparation for retrofitting an oil separator - Weekly timer - Electric spray lance for optimized cleaning of smaller parts - Inspection hatch in the tank area - Siemens Logo control system with a color touch panel, manufactured by Weintek (4.3") Upon request, commissioning can be carried out by qualified personnel for an additional charge.

Condition: used, This listing is for the Partical Measuring Systems LASAIR lll 310c particle measuring systems The unit is in full working condition and is ready for immediate release The Lasair® III 310C is a state-of-the-art portable aerosol particle counter designed to meet the stringent requirements of highly regulated environments. Manufactured by Particle Measuring Systems (PMS), it sets the standard for portable particle counters, ensuring that your environment remains clean and compliant.​ Key Features Particle Size Range: 0.3 to 25.0 µm Flow Rate: 1.0 CFM (28.3 LPM) ±5% Counting Efficiency: Complies with ISO 21501-4 requirements Display: 8.4" color VGA IR touch screen (IP65 rated) Data Storage: Up to 3,000 complete data sets Gkjdpfjxv A T Nsx Aqioa Connectivity: Ethernet, Modbus TCP/IP, RS-232, USB data downloading; optional wireless Ethernet Environmental Inputs: Four 4-20 mA inputs for external sensors Power Options: Operates on AC power or hot-swappable batteries Compliance: Meets ISO 14644-1, EU GMP Annex 1, and ISO 21501-4 standards Software Compatibility: Supports FacilityNet, PharmaceuticalNet, and FacilityPro for data analysis and reporting Reporting Capabilities: Cleanroom certification results are available through a local printout, downloadable via USB in a secure format, or through the use of external software packages Wireless Communication: Wireless network communications are facilitated with an externally mounted wireless adapter, simplifying communications with network systems ​ Specifications Dimensions: 30.1 x 32.7 x 25.9 cm Weight: 6 kg (without battery), 7.5 kg (with two optional batteries) Operating Environment: Temperature: 0 – 30°C; Humidity: 5 – 95% RH non-condensing Sample Tubing: Supports 3/8", 1/2", and 3/4" tubing up to 8 meters in length Sample Output Filtering: Internally filtered to >99.97% at 0.3 µm