Used Patel Automation for sale (13,366)

Condition: ready for operation (used), BR-Automation 5PP120.1043-37A Power Panel, serial number as shown in the photo, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Gbodpfxji D Uits Aqier

Condition: excellent (used), Manufacturer: R+D Custom Automation Type of equipment: Semi-automatic assembly and ultrasonic welding machine Application: Production of medical bags and tubes Gbedpfxsznvfie Aqier Serial number: 19-11231 Supply voltage: 240 V AC Supply frequency: 60 Hz Number of phases: 1 Rated current (Full Load Amps): 20 A Maximum motor power (Max H.P.): N/A Compressed air requirement: 1 CFM at 90 psi SCCR (Short Circuit Current Rating): 300 kA RMS Enclosure type: NEMA 12 Drawing number: D-11030-2-02

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting Gbsdjzhub Aopfx Aqijr - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 08/2027, type of input current: three-phase, year of last overhaul: 2023, Sheet metal cleaning machine Reini 2000 Stainless steel design with return button Capacity approx. 650 sheets/hour with sheet metal lubrication Godezfxy Dspfx Aqiobr Machine is mobile DGUV V3 certified, available only from us Connection 400V, 16A-CEE plug Dimensions approx.: 2000 x 1050 x 905 mm, W x D x H Used machine

Condition: like new (used), Year of construction: 2017, 1.0 unit used IML system – system with removal unit, placement on conveyor belt for horizontal stacking Manufacturer: Beck Automation AG Type: B32 Gbsdpfswuln Nox Aqijr Year of manufacture: 2019

Year of construction: 2011, condition: used, Packaging Automation PA182 tray sealer 1.2802E+11 Stainless tray sealer, two station rotary table, up to 40 packs per min, mobile, current tooling 210mm x 165mm tray Gedpfx Aqjdbqtqsisbr

Condition: new, Year of construction: 2024, Sifise Compact Industrial Palletizer Our state-of-the-art #palletizers are designed to streamline your production line and improve your workflow. With precision #engineering and advanced #technology, they can handle a wide variety of #products and pallet configurations, reducing the #risk of human error and increasing #productivity. Key Features: ✅ Space-saving design, also perfect for smaller production areas Gbedpfoma Ruxjx Aqier ✅ High-speed palletizing capabilities, increasing output and productivity ✅ Intelligent software for precise stacking and stability ✅ Easy-to-use interface, ensuring seamless integration into your existing systems ✅ Customizable options to meet your specific needs Say goodbye to the physical strain and repetitive motion injuries associated with manual palletizing, and say hello to a safer, more efficient way of working. Trust Sifise automation for all your palletizing needs.

Condition: used, Vibratory spiral conveyor / sorting device / spiral conveyor / vibratory conveyor RNA Vibratory bowl, sorting device / screw feeder with vibratory conveyor for screw technology Feeding system, feeder Manufacturer: RNA Rhein-Nadel Automation GmbH Type SRC-N200-2R Year of manufacture: approx. 2000 Bowl diameter (top): 250 mm Bowl diameter (bottom): 190 mm Bowl internal height: approx. 45 mm Sorting track width: approx. 3 mm Overall height (drive + bowl with sorting track): 240 mm Power connection: 230 volts, 50 Hz - Conveyor spiral made of metal Space requirement Ø x H: 260 x 240 mm Gjdpfxoy Tptts Aqisbr Weight: 13.5 kg Good condition Matching control units with suitable connection plugs are available under stock numbers: 61867, 61866, 61856, 61858, 61889.

Year of construction: 2019, condition: like new (used), Automated system to laminate reel of chromotography paper between 2 reels of polyester handle material and on to profile the chromotography paper tip and then cut the web of laminated polyester with chromotography paper into single profiled strips. The Matrix 7100 Laminator was developed to meet the demanding requirements of the lateral flow test strip industry for a moderately priced system capable of supplying the membrane lamination needs of the moderate to high volume production facility. The unit was designed to allow process flexibility while at the same time optimizing product yields and throughput. Numerous options are available allowing the system to support a wide variety of material types, lamination configurations and process variables. The Matrix 7100 allows for continuous lamination of membranes onto a plastic backing web and the cutting of the resultant laminate into discrete cards for further processing on other, downstream equipment. Numerous options provide the utmost in process flexibility at a very low overall cost. The integral touch screen operator interface terminal provides for multiple recipe storage and simple and reliable setup and operation while simplifying process validation. Gedpfxsya H S Se Aqiebr Key Features Touch screen operator interface terminal for simple setup and operation Simple web guide adjustment Rapid changeover to support multiple products Flexible to support changing requirements Base configuration supports Backing Web with Release Liner plus 4 membranes Extruded aluminium structural frame Flying shear for continuous card cutting Reel to reel lamination option

Condition: used, Year of construction: 2011, machine/vehicle number: 408529.10.000/01, Temperature control unit manufactured by Hahn Automation, used and untested. Designed for applications in tool temperature control, injection molding, and industrial process engineering. Operates as a single-circuit system with REMAK control system. The working medium is water*, with a maximum flow temperature of 95 °C*. Heating capacity is 27 kW, pump capacity is 60 l/min at 4.5 bar*. Year of manufacture: 2010, total weight: 130 kg. Gbsdpsy Su A Rjfx Aqier

Condition: used, Year of construction: 1996, Garvens Automation continuous weighing scale 1600-1150-950 RA1975 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Manufacturer: Garvens Automation Type: SL 100 ID1 Year of construction: 1996 Machine type: automatic checkweigher Total size: approx. 1600 x 1150 x 550 mm (WxDxH) Electrical connection (Plug and Play) Nominal voltage: 380V and 220V Nominal frequency: 50Hz / 60Hz (+/-2 %) Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g Conveyor belt 1600-1150-950 and SEW gear motor with frequency converter Conveying length (FL): 1600 mm effective width (NUB): 1150 mm belt width (GB): 950 mm Motor Type: SEW Gearmotor with frequency converter Motor Power: kW 0.55/0.55 Speed: 0,02-1,2 m/s Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Gbsdpfx Aqok Abn Soisr Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: new, 250kg Welding Positioner Turning Capacity: 250kg at 300mm Tilting Capacity: 250kg at 300mm Gbedpfjtzan Nex Aqior Rotation Speed / Power: 0-4rpm at 0-90v / DC200w Tilt Range / Power: 0-135° in 30sec/ DC500W Rotation Drive Control: DC Motor Card Table Size: Ø500 x 20t c/w 4 slots Earthing: 300A

Condition: new, 3t Conventional Welding Rotator Set Item: Drive / Idler Rotator Set Load Capacity Each: 1.5MT Total Rotation Capacity: 4.5MT Vessel Size Min: Φ286mm at 60° included angle Vessel Size Max: Φ1000mm at 60° included angle Gedpfxotqn Ufs Aqisbr Tyre Type & Size: Vulcanised PU, Φ245mm x75mm Roller Speed: 400-4000mm/min

Year of construction: 2023, operating hours: 5,027 h, condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, We are offering this very well-maintained Halter CNC Automation Millstacker Premium 25 handling robot for CNC milling machines, year of manufacture 2023, with very low operating hours. Gbsdpfx Aqsy Nmmioisr Custom modifications deviating from the standard model that were carried out for us: 1. An individual deposit position (in our case, onto a chute into a water bath) was added as an option. This setup also allows all 12 stacking positions to be loaded with raw parts—whereas when depositing onto the table, only 11 stacking positions can be loaded with raw parts. 2. Customized adjustment of the angular alignment in the magazine. As a result, longer/larger parts can also be placed lengthwise between the bars when diagonal placement is no longer possible. 3. An additional set of longer support bars was manufactured to securely position larger parts. If you have any questions or require more information, please feel free to send us a message or call us.

Condition: good (used), Cleaning booth for component cleaning using a high-pressure cleaner. Previously used for cleaning components after 3D printing (e.g., for removing support material). Operation via foot switch. In good condition. Gbedoza T Nkjpfx Aqijr

Condition: new, Manz Automation aico.panel 80036808 Touch-Panel 19" aico.box.IPC V2 81009594 Set Item condition: New as shown Possible traces of storage, installed but not put into operation. Type: aico.panel Art-No.: 80036808 24VDC/2A Type: aico.box.IPC V2 Art-No.:81009594 REV: 2.1; 100-240 VAC / 4-2A; 50/60Hz Incl. accessories Gjdpfx Aqjpug Ayjijbr 30kg Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: excellent (used), WSM SZ-250K Feeder Gbodpfx Aqjx Elfcoijr The WSM SZ-250K is a feeder from WSM-Automation specifically designed for applications with high cleanliness requirements. The "k" in the model designation stands for "short" and refers to the reduced length of the sorting helix, which minimizes abrasion caused by fill level and vibrations. Function: This feeder combines the advantages of spiral feeders with the need for clean processes. Special Feature: The shortened sorting helix (effective length) is the key innovation for minimizing contamination from abrasion. Application: It is used where high cleanliness during feeding is required to ensure clean screw connections. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with level control and dirt barrier Coil conveyor WFL 200 IU (200 mm) with singulator Aluminum chassis with plexiglass enclosure Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 volts Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), WSM Stationary Screwing Unit Assembly and testing of components for car radios and navigation systems. The assembly station is enclosed in a protective housing. The service doors are equipped with monitoring switches with interlocks. The doors are locked during automatic operation and can only be opened during automatic stop or manually after pressing the "Doors" button on the control panel. Automatic operation cannot be started with a door open. Operational Sequence The station is loaded with the pre-assembled component via the transfer belt. The following describes the operation steps of the automatic station with a transfer belt. In normal operation, all three stations operate in parallel. - Positioning the test unit (WT) with the pre-assembled module in station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the test unit onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.2 - Positioning the screwdriver and screwing the front PCB in place - Lowering the test unit (WT) onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.3 - Lowering the light shield and making contacts, adjusting the carrier with the test sensors from below - Type-dependent testing of the SD + CD slot lighting and buttons - Functional test of the CD eject button - Lowering the test unit (WT) onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen. and can be repaired if possible. For this, the system is switched to manual operation and the doors are opened. After the repair and restarting the automatic system, the workpiece carrier is tested again in the station. If a repair is not possible (e.g., due to a screw error), the workpiece carrier is marked as NIO (Not Okay) in the control system and is not processed further. Manual NIO marking and rejection is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de Gedpfx Aoibichoqiobr More assembly stations, new and used, can be found in our shop! International shipping costs on request!

Condition: excellent (used), WSM SZ-250K Feeder The WSM SZ-250K is a feeder from WSM-Automation specifically designed for applications with high cleanliness requirements. The "k" in the model designation stands for "short" and refers to the reduced length of the sorting helix, which minimizes abrasion caused by fill level and vibrations. Function: This feeder combines the advantages of spiral feeders with the need for clean processes. Special Feature: The shortened sorting helix (effective length) is the key innovation for minimizing contamination from abrasion. Application: It is used where high cleanliness during feeding is required to ensure clean screw connections. Feeding unit SZ-250K consisting of: Gbjdpsx Elkfjfx Aqijr Belt hopper BB-01-B (0.5 l) with level control and dirt barrier Coil conveyor WFL 200 IU (200 mm) with singulator Plexiglas enclosure Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 volts Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Vibratory Bowl Feeder / Sorting Device / Spiral Feeder / Vibratory Feeder RNA Vibrating bowl, Sorting device / Screw feeding with vibratory feeder for screw technology Feeding system, Feeding device Gbedexf Urpspfx Aqisr Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2L Year of manufacture: approx. 2000 Upper bowl diameter: 250 mm Lower bowl diameter: 190 mm Bowl internal height: approx. 35 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 240 mm Power supply: 230 Volt, 50 Hz. - RNA control unit, model ESG 90, for adjustable vibration speed - The feeder was used for supplying automotive blade fuses Required space Ø x H: 250 x 240 mm Weight: 13.5 kg Good condition A vibratory bowl feeder always consists of two essential components: 1) Sorting bowl, where the parts are oriented 2) Drive unit, which generates vibrations via mechanical oscillations in the sorting bowl and thus sets the parts in motion.

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder by RNA Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving technology Feeding system, feed unit Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2R Year of manufacture: approx. 2000 Bowl diameter (top): 200 mm Bowl diameter (bottom): 130 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 225 mm Control voltage: 24 Volt DC (external power supply required) Mains connection: 230 Volt, 50 Hz Gbedoxw Rdlepfx Aqier - An external 24 VDC power supply is required for start/stop signals (the controller does not have an internal 24 VDC power supply). - Control unit REO type Reovib R6 / 439 for adjustable vibration speed - The feeder was used for supplying automotive blade fuses - Mounted on an aluminum profile stand Space requirement Ø x H: 240 x 250 mm Weight: 17 kg Good condition A bowl feeder always consists of two essential components. 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which generates vibrations in the sorting bowl via mechanical oscillations, thereby moving the parts.

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder RNA Vibratory bowl, sorting device / Screw feeding system with vibratory feeder for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2L Year of manufacture: approx. 2000 Bowl diameter (top): 200 mm Bowl diameter (bottom): 130 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 225 mm Control voltage: 24 Volt DC (external power supply required) Power connection: 230 Volt, 50 Hz - An external 24 VDC power supply is required for start/stop signals (the controller does not have an internal 24VDC power supply). - REO controller type REOVIB R6 / 439 for adjustable vibration speed - The feeder was used for feeding automotive blade fuses Gedsxrgvmspfx Aqijbr - Mounted on base frame made from aluminum profile system Required space Ø x H: 240 x 250 mm Weight: 17 kg Good condition A bowl feeder always consists of two main components: 1) Sorting bowl, in which the parts are aligned 2) Drive unit, which generates vibrations in the sorting bowl via mechanical oscillations and thereby moves the parts.

Year of construction: 2001, condition: ready for operation (used), Max. weighing range: 1000g, with Weighing Cell Mettler Toledo TF10-L-P, display of weight values, weight classification and automatic sorting of weighed goods. Gedpfotqtw Uex Aqijbr

Year of construction: 2011, condition: ready for operation (used), An automated pallet handling system DMG Mori for machining centers is available. Pallet positions: 7, max. workpiece weight: 250kg, max. workpiece diameter: 500mm, max. workpiece height: 400mm, pallet change time: under 40s. Documentation available. An on site inspection is possible. Gsdpjydd Acefx Aqiebr

Year of construction: 2023, operating hours: 10 h, condition: new, functionality: fully functional, Here we offer a machine that was specially developed for fixing loose or cracked branches. The branches are automatically recognized as they pass through and fixed with hot melt adhesive. This significantly reduces waste due to branch branches. With opaque painted surfaces, the branch becomes almost invisible. Gsdspiufwjpfx Aqisbr Net Automation sets the standard with the AELA XKI new technological standards in the Diagnosis and correction of wood characteristics. • greatly reduced throughput times • immediate further processing possible • Visual enhancement • Easiest operation DIAGNOSIS AND CORRECTION • Rotten branches • torn branches • Resin galls • Wing branches etc. ..... ..... ADVANTAGES • no tear-outs when planing • Detection of dirt and slatted marks • Diagnosis with artificial intelligence (AI) • automated vaccination process The system can be viewed and tested by arrangement in 77866 Rheinau.