Hand lever shears

Peddinghaus 3 BR 6

Condition: ready for operation (used), machine/vehicle number: 64532, used hand hydraulic tube bending machine existing bending segments: 3/8, 3/4, 1 1/4 u. 2" space requirement: 850 x 640 x 780 mm Pedpjdzw Hwjfx Adijgw

Condition: good (used), Year of construction: 1982, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 3 Standard slide units 1 Narrow slide units Pjdpfx Adjn E N Ndeijgw 1 control shaft Working range: wire diameter range: 0,5 - 4,0 mm strip metal width: up to 60 mm feeding length: up to 270 mm output: up to 350/min

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m Pgedpfx Adjhpktvjisw The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Year of construction: 1974, condition: used, machine/vehicle number: P52111974, Item number: MA909 Manufacturer: Ebu Type: SK 75 Year of manufacture: 1974 Machine no.: P 5211974 length [mm]: 1700 width [mm]: 1200 height [mm]: 2450 Weight [kg]: Approx. 4500 Connected load: 380V Stroke [mm]: 16-140 throat [mm]: 300 Punching force [to]: 75 Table size LxW: 800 X 620 Machine data: Stroke rate 105 / min Pgedpfxscanfwo Adijw Stool adjustment 80mm Table adjustment Control system: Set Up Single stroke foot Continuous run Accessories: Protective screen

Condition: good (used), Year of construction: 1985, Main drive motor: 400 V, 055 kW, 2800/min Thread dimameter range: M 1- M 6 Spindle stroke: max: 15 mm Pgsdpfx Asdzud Dodiew Roduction rate: max. 120/min

Condition: good (used), Reamer, twist drill, drill bit -Manufacturer: Holex, WMW, Gühring / Ilix, twist drills 37 pieces Ø 14.5 - 31.5 mm -Type: Two-cutter, holders MK1, MK2, MK3 -Size: 1x Ø 14.5 - 31.5 mm each, increasing by 0.5 mm -Price/Delivery: complete -on request: different sizes/quantities available from further stock -Transport dimensions: 420/350/H170 mm Pgjdpfx Ajw Hygwediew -Weight: 16.3 kg

Condition: new, The SBS 255, part of the Horizontal Mitre Cutting Bandsaws category and the Semi-Auto Bandsaw group, is a compact, robust machine designed for efficient machining of small batches. This universal workshop band saw features a one-piece cast-iron saw frame that is torsion-proof and swivels 60° to the right and 45° to the left, allowing for versatile cutting options. With a rigid vise equipped with lateral slide and long guideways in the movable jaw segments, users can achieve precise cuts on various workpiece sizes, thanks to the combination of carbide jaws and adjustable ball bearing guides. The SBS 255 operates quietly, ensuring short machining times and easy handling, which leads to increased productivity. Additionally, it is powered by a strong motor for continuous operation and comes with a high-capacity coolant system. Included with the saw are essential tools like a saw blade, base, pressure gauge, and operator instructions. KNUTH provides the quality assurance you expect, so order online today to enhance your workshop with the SBS 255 Horizontal Mitre Cutting Bandsaw. Psdpsuyiqdsfx Adiogw

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram Pgsdpfx Ajdzqltjdiow - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: good (used), Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination Pgedpoin Rn Asfx Adiow -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

Condition: new, Year of construction: 2025, cutting diameter 240 mm saw band length 2910 x 27 x 0,9 mm cutting width 310 mm table height 900 mm 35 + 75 m/min 1,1/1,8 kW 470 kg 800 x 1720 x 1450 mm Manufacturer no. 20437 Description: - Miter cuts left 60° and right 45° - Quick-action clamping stick can be moved in the T-slot for quick position changes - Hydraulic brake cylinder - Large ball-bearing turntable for easy miter adjustment (durable) - Chip clearing brush - Machine base with automatic cooling system - Lockable main switch, emergency stop separately - EMC (Electromagnetic Compatibility), UVV Pjdpfxjwa Ui Ts Adijgw - Current consumption display (saw band wear history, tool monitoring) - Automatically more performance with the proven Berg & Schmid 3-stage AutoCut system