Used Peddinghaus Junior for sale (115)

Condition: used, Max. punching force: 400 kN Max. shear force: 600 kN Punches 20 mm holes in 16 mm steel Cuts on the flat bar shear up to 300 mm to material thickness of 12 mm steel Gksdpfsy Tldnex Aaned Further technical data on request With a range of punches and dies as desired Weight: approx. 1,500 kg

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 5053-4053040H002, power: 11 kW (14.96 HP), Bar shears Peddinghaus Caddy 50 used, very good condition Gkodotuknyjpfx Aanjd year of construction 1999 Technical data: Shearing force/diameter (max.): 900 kN/50 mm Drive power: 11 kW Equipment/special features: bar magazine, 6 m, length stop, safety device

Condition: used, linear rail with folding cams Height adjustable for attachment to hole punches Gjdpfx Aevcmrgsanekd

Condition: good (used), Peddinghaus Combined Section Steel Shear Type 210/ 13 See condition Gsdpfxjv D Nzye Aanekd

Condition: used, Year of construction: 1983, round bar steel 50 mm square edge steel 40 x 40 mm L-beam 140 x 13 mm Punch power 900 kN hole punching press: throat 510 mm Gjdpovh I T Nsfx Aanekd hole punching press: max. length of stroke 29 mm hole punching press: capacity (dia. x thick.) 31 x 20 mm notching: l + T material 80 x 14 mm no. of strokes 40 / 45 Hub/min total power requirement 4 kW weight of the machine ca. 3,7 t dimensions 2,1 x 0,7 x 2,12 m Accessories: various punches and dies

Condition: used, Max. punching force: 600 kN Max. shear force: 1000 kN Punches 20 mm holes in 19 mm steel Gkedpfxeq D E Tcj Aaned Cuts on the flat bar shear up to 500 mm with material thickness of 12 mm steel Further technical data on request With a range of punches and dies as desired Very good condition

Condition: used, functionality: fully functional, Year of construction: 1987, Punching Machine + Profile Steel Shear Gksdpfxsxp Ndhj Aanjd Mfr. Peddinghaus Type: Peddimaster 40/60H Year: 1987 Technical Data Manufacturer: Peddinghaus Model: Peddimaster 40/60H Year of manufacture: 1987 Shearing force: 60 t Punching force: 40 t Profile steel shear: L- and T-angles at 90° 100 x 10 mm at 45° 65 x 8 mm Notching unit with square notcher for sheet metal up to 10 mm Flat bar shear for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - Electric back gauge 3000 mm - Stop table - Adjustable hold-down - Large tool package as per photos All information given without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), Punch holder, die holder, notching tool, punching tool, punch, punch die, punching die, for eccentric press, hydraulic press Gkedpfox Idm Rox Aaned -Stamp holder: with slotted punch tool, without die -Socket: Ø 51 mm / Bolt circle Ø 110x18 mm see photos -Punch tool: Slotted hole 22.5x50 -Dimensions: Ø 135 x 180 mm -Weight: 6.7 kg

Year of construction: 1970, condition: good (used), machine/vehicle number: FF 16, Offer 22226 Technical data: - Pressing force 50 T - Outreach approx. 360 mm Godpfxsit T Hyj Aanjkd - Installation height approx. 240 mm - Drive 400 V / 7.5 kW - Punching in ST 40 steel, e.g.: - up to 25 mm Ø in 16 mm - up to 20 mm Ø in 19 mm - Space requirement approx. W 1000 x H 1900 x D 1000 mm - Weight approx. 1800 kg

Condition: used, Year of construction: 1991, Maximum punching force: 1100 kN Maximum shearing force: 1700 kN Stroke discharge: 510 mm Hole 31 in 25 mm Flat bar: 500 x 22 mm Hydraulic hold-down for the flat bar blade Four-square latch Weight: approx. 5000 kg Gsdpfx Aef Nwn Ujanjkd Very good condition

Condition: good (used), Stop, depth stop, length stop for press brake, bending machine, guillotine shear..., electric stop for profile steel shear, contact length stop -Manufacturer: Peddinghaus, electric stop contact length stop for profile steel shears flat steel shears -Stop head, tiltable, swiveling Gkodoznkr Depfx Aanjd -Hole: Ø 50 mm -Transport dimensions: 440/270/H155 mm -Weight: 6.4 kg

Condition: excellent (used), Cutting blades, replacement blades for guillotine shears, replacement cutting edges, cutting knives, shear blades, flat steel blades for profile steel shears, lever shears, sheet metal knives -Manufacturer: Peddinghaus, 3 cutting blades for profile steel shears 210/16 210 Super 16, unused -Zg. No.: 44085 510 00 Cutting length: 260 mm -Hole spacing: 140 mm / 2x M20 see photos -Submission/Price: complete -Dimensions: 280/18/H70 mm Gksdpfx Aaszr Eb Uonsd -Weight: 2.6 kg/pc.

Condition: used, Mechanical punching tool with a punching force of 1000 kN. Gkedpfef Nwqasx Aaned Tool holder for stamps up to 90 mm can be mounted on request. A large assortment of stamps and matrices is part of the delivery scope.

Condition: used, Offer 22187 Gkodowclhxspfx Aanod Technical specifications: - Height-adjustable roller conveyor with spring support and locking mechanism - With clamping lever - Roller conveyor length approx. 3000 mm - Min. roller conveyor height approx. 600 mm - Max. roller conveyor height approx. 1100 mm - Outer roller width approx. 280 mm - Roller length 2 x 125 mm each - Roller diameter approx. up to max. 100 mm - Maximum possible number of rollers: 10 - 7 pairs of rollers are installed - Total width of the roller conveyor approx. 500 mm - Total length approx. 3200 mm - Weight approx. 250 kg

Condition: like new (used), Year of construction: 1995, Roller conveyor length: 6000 mm Rolls divided, total width: 280 mm Gkjdpfx Asgyk A Doanod Min.height: 630/760 mm Max.height: 1150/1300 mm Difference between the height information given by rollers and the transverse movement Weight: 625 kg

Condition: good (used), machine/vehicle number: 550C08, A used PEDDINGHAUS punching machine with a large stroke and a large support table with stops. Punching force: 45 tons. Stroke rate: 40 strokes/min. Stroke: 762 mm. Working height: 1110 mm. Goded Hxrtspfx Aanjkd

Condition: good (used), Profile steel shear, profile shear, punch, punching machine, hole punch -Pressure force: 40 tons -Punching -scissors -cut -disengage -mechanical release -Foot switch: 1 -various stamps and dies Godpfx Aaecc Ubujnokd -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg

Condition: used, Technical details: Gksdox Adbnepfx Aanjd bending angle max.: 0 - 225 ° working height: 850 mm operating voltage: 380 V bending angle max.: 0 - 225 ° number of bars max.: 15 mm diameter max.: 55 mm revolutions per minute: 5 -16 U/min total power requirement: 5,5 kW Weight approx.: 0,7 t dimension machine xH: 1,60 x 1,20 x 1,02 m Reinforcing Steel Bending Machine Perfekt 55 KA, PA, PLA — high-performance production machine. Thanks to the control system with four different bending speeds, the machine operates with exceptional efficiency. The bending angle is continuously adjustable from 0 to 225 degrees for left or right rotation. With its correction potentiometer for material spring-back compensation, the machine is ideal for medium and large-scale series production. Using the PA program control unit, up to eight different bending angles can be continuously pre-programmed from 0 to 225 degrees via rotary knobs. without accessories! *

Condition: used, Year of construction: 1984, round bar steel 45 mm square edge steel 40 mm L-beam 120 x 13 mm flat steel 500 x 12 mm punching pressure 60 t throat 510 mm 500 x 12 oder 400 x 16 mm punch diameter 27 in 17 mm punch diameter 39 in 12 mm oil volume 80 l total power requirement 7,5 kW Godpfxogvkmne Aanekd weight of the machine ca. 2,4 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Manufacturer: Peddinghaus, die-cutting tool for holding dies Gksdpfx Aasx Nng Doned -Type: unfortunately without a type designation -Dimensions: see photos -Dimensions: 350/340/H245 mm -Weight: 58.5 kg

Condition: new, punching pressure 28.0 t punching cross-cut in cmm 31 in 7.0 mm ST throat 250 mm dayligth 223 mm no. of strokes 10 - 30 Hub/min oil volume 32.0 ltr. work height max. 1033 mm total power requirement 3.0 kW weight of the machine ca. 553 kg dimensions of the machine ca. 730 x 540 x 1530 m Furnishing: - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swiveling scraper (plates exchangeable) - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function Gkjdew U U S Nopfx Aaned - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Main connection cable and plug for 16 amps are not included in the scope of delivery

Condition: used, Punching tool, punch, stripper, hold-down Gjdpfx Aaszm Iy Nonjkd -Scraper: Hold-down device for dies -Hole: Ø27/33 x 257 mm -Dimensions: 360/105/H135 mm -Weight: 5.0 kg

Condition: used, Punching tool, punch, stripper, hold-down -Scraper: Hold-down device for dies -Hole: Ø30 x 258 mm Gkodpfx Aezm I A Doaned -Dimensions: 310/100/H125 mm -Weight: 4.6 kg

Condition: good (used), Punch, punching machine, hole punch, eccentric punch Gksdpfxsk D Nt Do Aaned -Manufacturer: Peddinghaus, hole punch -Type: 225B/45 -Pressure force: 45 tons. -Punching capacity: see photo of nameplate -Projection: 360 mm -Accessories: incl. punching tool and 2nd table (see photos) -Dimensions: 1540/700/H1510 mm -Weight: 1410 kg

Condition: good (used), Die holder, separating tool, punching tool, punch, punch die, punch stamp, gill forming tool, die holder -Stamping tool: die holder -Hole: Ø 45 mm Gjdpfx Aaezniqxjnskd -Bore: Ø 33 mm -Hole spacing: 180 x Ø20 mm -Dimensions: 240/85/H120 mm -Weight: 7.3 kg