Used Pendulum for sale (574)

Condition: used, Year of construction: 2017, mileage: 10,236 km, power: 24 kW (32.63 HP), first registration: 12/2017, overall weight: 2,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 09/2027, gearing type: automatic, number of seats: 1, Equipment: all wheel drive, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle subject to final confirmation, errors, typos, and prior sale: Hako CityMaster 600 with a new engine, sweeping brush with water and dirt tank, new engine, front-mounted mower, hopper spreader, snowplow (Vehicle 267) First registration: 14.12.2017 10,236 km 1,915 total operating hours, but now with a new engine! 971 brush operating hours Engine new in 2025, currently approx. 170 operating hours Engine: 1,642 ccm 24 kW / 33 hp 25 km/h approved Permissible total weight: 2,200 kg Unladen weight: 1,380 - 1,465 kg Overall length: 3,160 - 3,260 mm x overall width: 1,085 - 1,200 mm x overall height: 1,9985 - 2,202 mm Road approval Articulated steering 2 adjustable brush systems Turbine + water pump on/off Adjustable water quantity 3 speeds for operation Radio/CD Rotating beacon on driver's side, rear 2 headlights on top + 2 in the middle Rearview camera with monitor, additional camera for monitoring the suction nozzle, automatic switching during reversing Radio with Bluetooth for mobile phone and MP3 Repeating lights on cabin roof Distance sensor 7-pole control cable Bledpezxkf Esfx Ab Dol Universal tires 23.00x8.50-12 Trelleborg T539, front approx. 80%, rear approx. 90% Grammer comfort driver's seat with air suspension Universal suction container 600 L, hydraulically tilting, payload 500 kg, emptying height 142 cm, emptying width 865 mm Handheld suction hose for leaves, accumulated dirt, etc., foldable on the passenger side in the middle Universal quick-change roll container Vacuum gauge on container, for monitoring the suction power and indicating decreasing suction power when the maximum container filling level is reached, as well as a clogging indicator Sweeping unit: 2 brushes, hydraulically adjustable, sweeping width 110 to 180 cm, brush arms with 3-fold impact protection Disc brush made of plastic-steel Lightweight weed brush on the right Attachment: Suction nozzle, roll container sweeping unit Universal front-mounted mower 122 cm (hydraulically driven 3-blade special mower with rear discharge, working width 122 cm, integrated pendulum compensation, four-wheel drive with cutting height adjustment in 1 cm increments from 4 - 10 cm, transport safety device for road travel) Attachment: Suction nozzle mower Attachment: Suction system (transfer device for connecting the suction nozzle) Hopper spreader KIF SS200 (single-chamber spreader with fully hydraulic drive, auger discharge, mixing shaft, and foldable spreading disc, loading capacity 200 L, manual control for spreading quantity and width, working width 1.5 - 4.0 m spreading disc, protection, and discharge chute made of stainless steel) Filling sieve, foldable cover, additional protective cover for Citymaster 600. Quick-change base frame for Citymaster 6009, spreader RAL 2011 and 2-layer interior coating, container attachment 130 L, to increase the loading capacity to 330 L for light spreading materials such as salt and granules. Spreading control from the cabin, spreading quantity, spreading width with automatic start/stop function Snowplow 135 cm with breakaway function, rubber scraper blade Inspection + TÜV (technical inspection) valid until 09/2026 Price: €29,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. Place of jurisdiction for both parties up to a dispute value of €10,000 is the district court of Ludwigsl

Condition: used, Machining area: - in the X direction without gluing 6000 mm - in the X direction with gluing 5000 mm - in the Y direction 1200 mm - in the Y direction with main spindle + center distance 20 mm 1300 mm max. workpiece height above - top edge of suction plate Z1 100 mm - max. workpiece thickness Z2, dependent on equipment/application Work table height: approx. 950 mm 1 main spindle with pneumatic feed stroke - drive power: 12 kW in S-1 operation - tool holder: HSK F63, taper diameter = 38 mm - tool change: automatic - change force: 11000 N - tool weight: max. 6 kg - direction of rotation: clockwise/counterclockwise, programmable - speed range: continuously variable 1500 - 24000 rpm, programmable - drive: frequency-controlled three-phase motor - spindle lubrication: single grease lubrication - spindle cooling: water cooling 1 CNC axis rotating 360 degrees 1 vertical drilling unit S21 Blodpfxezupibe Ab Dol Machine table consists of: - 6 support arms adjustable in the X direction, each with a rear and center stop, all stops controlled by the program - 6 sets of suction plates consisting of a total of - 6 suction plates 114 x 159 x 100 mm - 6 suction plates 125 x 75 x 100 mm - The support arms and suction plates can be individually positioned according to the corresponding workpiece size. Changeover area: - without pendulum machining, without gluing: X = 2 x 2900 mm - free space in the middle: X = 200 mm - without pendulum machining, with gluing: X = 2 x 2150 mm - free space in the middle: X = 700 mm - with pendulum machining, without gluing: X = 2 x 2400 mm - free space in the middle: X = 1200 mm - with pendulum machining, with gluing: X = 2 x 1700 mm - free space in the middle: X = 1600 mm Feed drive system Rapid traverse rates: - X-axis 100 m/min - Z-axis 25 m/min Air pressure: 6 bar Tool changer magazine with 18 positions Tool coding: position-coded Tool weight: max. 6 kg Tool length: max. 150 mm Tool diameter: max. 100 mm when fully loaded max. 150 mm with free adjacent positions or nesting Central connection for extraction Mains voltage: 3/N/PE, 400/230 V, 50 Hz 1 vacuum pump 100 m3/h

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 100 mm, number of axes: 3, overall weight: 3,350 kg, spindle motor power: 9,000 W, spindle speed (max.): 24,000 rpm, This 3-axis FELDER PROFIT H 20 CNC Wood Machining Centre was manufactured in 2011. It features a working range of 3,060 mm in the X-axis and 1,260 mm in the Y-axis, with a maximum speed of 24,000 rpm. The machine includes 14 vertical drilling spindles and 4 horizontal drilling spindles in the X-direction. If you are looking to get high-quality wood machining capabilities, consider the FELDER PROFIT H 20 machine we have for sale. Contact us for further details. • Number of Milling Spindles: 1 • Main Motor: 9 kW • Torque Support: Included • Tool Clamping System: HSK-F63 • Tool Changer Positions: 8 • Linear Changer: Included • Vertical Drilling Spindles: 14 • Horizontal Drilling Spindles X: 4 • Horizontal Drilling Spindles Y: 2 • Grooving Saw: In X-direction • Positioning Aid: Included • Crosshair Laser: Included • Vacuum Pump: Included • Number of Vacuum Pumps: 1 Blodpfx Abjzvca Ao Dsl • Vacuum Pump Capacity: 90 m³/h • Safety Device: Safety mat (Trittmatte) • Tool Change Helper Device: Included • Workpiece Support Aids: Included • Pendulum Machining: Included • Control Unit: TPA ALBATROS • Software: TPA ALBATROS 2 • Total Connected Load: 15 kW

Year of construction: 1973, condition: good (used), guillotine shear with rear stop and stacker design: pendulum cut cutting length: 3.050 mm plate width: 1.000 mm Bodpfognywusx Ab Dsll plate thickness: 4,5 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine TRAVEL (X) 7,500 mm TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 option for the i530M. Independent AC. Heidenhain digital drive servomotor for each axis HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) H48 – Coolant through the spindle type AD. M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. CE10 - PROTECTION on the back and both lateral sides of the machine column P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm PW11B – Pendulum working area system. Bedpfew U Tlzjx Ab Djll PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Condition: new, mileage: 40 km, power: 110 kW (149.56 HP), fuel type: diesel, empty load weight: 3,000 kg, maximum load weight: 500 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 2,720 mm, loading space width: 1,900 mm, loading space height: 500 mm, Equipment: ABS, additional headlights, air conditioning, central locking, crane, differential lock, hydraulics, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, FUSO Canter 3S15 tipper truck with crane and remote control, delivery time 2 months, the vehicle is available for rent with an option to purchase. Chassis: Fuso 3S15 Canter - Gross vehicle weight 3500kg, payload of the finished vehicle with crane and tipper body approx. 500kg - Manual transmission - Limited-slip differential - Batteries 2 x 100 AH - Trailer coupling, ball hitch 3500kg with electrical connector (factory-fitted) - Heated exterior mirrors - Automatic climate control - Radio with hands-free phone system - Reversing warning system - Auxiliary drive with speed increaser - Battery cover and AdBlue tank cover - Preparation for battery disconnect relay - Traction tires Continental 195/75/R16C - Seat covers Aluminum tipper body - Controllable manually and via crane remote control - Internal dimensions: 2575 mm x 1775 mm x 400 mm - Prepared for side extension to 580mm Blodpfezv Nr Eox Ab Dsl - Loading height unladen 980mm - Aluminum floor - 6 lashing points, recessed, according to DIN EN12640 1000kg - Aluminum side walls, folding, upper edge protected - Rear wall with pendulum automatic and folding - Work light Crane: F32 with remote control, 3 x hydraulic, 1 x mechanical extensions - Lifting capacity according to manufacturer: 3.20m = 815kg, 4.40m = 575kg, 5.60m = 400kg, 6.80m = 300kg, 8.05m = 220kg - Design according to CE directive (EN 12999) - Slewing range 370° (mechanical slewing range limitation 190°) - All hydraulic cylinders are double-acting - Piston rods are hard-chrome plated - Pressure relief and load holding valves - Emergency stop - Control block with 5 control valves - Separate hydraulic tank (33l) with filter, mounted on the crane base - Support legs extendable on both sides, special support, support width 3.10m - Hydraulic support legs, swiveling 30° and 180° - CE, incl. M.O.L. - Standard color RAL 3020 traffic red - all cylinders painted black - Load hook and mounting brackets - Dead point above the support legs (cannot be tilted) - Painting with epoxy primer and topcoat: two-component or powder coating - Support plates - Articulated support plates (2 pcs) for support legs - CE version - Subject to errors and prior sale. ?si=wuCaQnJSZ8LahUV9 ... Climate control, climate control system, VAT can be shown separately, ASR, ABS, radio, on-board computer, heated mirrors, electric immobilizer, central locking with remote control, trailer coupling, power steering, rev counter, limited-slip differential, tinted glass, spare wheel, twin tires, cab: short cab, electric windows, auxiliary headlights, thermal protection glass, auxiliary drive, crane, new, emission class: Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, rentable, particulate matter sticker: 4 - green.

Condition: new, mileage: 90 km, power: 129 kW (175.39 HP), fuel type: diesel, empty load weight: 4,635 kg, maximum load weight: 2,855 kg, overall weight: 7,490 kg, tire size: 205/75/R17,5, axle configuration: 4x2, wheelbase: 4,750 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, loading space length: 5,371 mm, loading space width: 2,310 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, Fuso 9C18 with aluminum platform body, 5.5m. Loading crane behind the cab, delivery time approx. 4 months. Platform body dimensions can still be modified, loading crane with 3 x hydraulic extensions and remote control. - GSR equipment including reversing camera, lane keeping assist, etc. - Cruise control - Double passenger seat - Climatronic - Duonic (automatic) - Wheelbase: 4.75m - Optional trailer coupling 3500kg Permissible total weight: 8550kg, derated to GG 7490kg, payload approx. 2855kg (Total weight 8550kg possible without modification, then payload approx. 3915kg!) - 1x tool box - Rotating beacons, reversing camera, rear warning lights, optional Aluminum platform body: 5500 x 2380 x 500 - Bottom frame anodized with 8 mounted tie-down points per side - Floor recess 24 mm with Sieveck floor panels 24mm - 13 aluminum cross members (80 mm) anodized - 2 x aluminum auxiliary frames (130 mm, reinforced) anodized - Front wall 800mm, incl. front wall supports - Side walls 500mm, 5 hinges per side wall, removable - Side boards made of 25 mm snap lock profiles - Rear wall: height: 500 mm / foldable, 3 hinges - STANCHIONS: fixed at the front, KTL coated, middle stanchions: foldable, K20, removable at the rear Folding loading crane 8m with 3 x hydraulic extensions mounted behind the cab Loading crane Fassi F70B.1.24e 0711.400 FASSI loading crane F70B.1.24e e-dynamic Design according to CE directive (EN 12999) Base unit: F70B.1 e-dynamic Slewing range 400° All hydraulic cylinders double-acting Piston rods hard chrome-plated Single-knee lever system Electronic overload protection device with FX500 Emergency stop and optical alarm (90% and 100%) FASSI stability control FSC incl. LMB II Bljdpfx Abszv Nuao Dol 6 functions RCH or RCS radio remote control (linear levers) with display and XP system Pressure relief and load holding valves Control block with 5 control valves, operable from one side Separate hydraulic tank (33 l) with filter, mounted on the crane base Extendable on both sides, outrigger width 3.30m, hydraulic Outrigger support swiveling 45° and 180° Standard color RAL 3020 traffic red - all cylinders painted black Load hook and fastening brackets Driving position: folded transversely to the direction of travel Dead point above the outrigger beam Observe on-board voltage: 12V 06.91 Fassi RCS radio mini - 6 linear levers 08.88 FASSI stability control FSC-M/1 » incl. LMB II 97.17 IE742 connection box 0711.01.12 special outrigger, outrigger width 4.95m » extendable incl. C.80.02.B dead point rotated by 180° (above the pendulum beam) 96.A2 1 LED work spotlight on the pivot arm » mounted 96.A7 LED for 2 support legs, not mounted » (crane) 96.03 Oil cooler type 60/12 max. 60l pump capacity 95.89 Additional charge for stainless steel screws and stainless steel hose clamps 95.85 Additional charge for Dinitrol application (cavities) 04.T0.99 Zinc primer for F65B.0, F70B.0, » F65B.1, F70B.1 1.00 Black parts with KTL coating 8888 Proportionate transport costs 08.32 Slewing valve / load holding valve Slewing cylinder, for all cranes with rack and pinion 9. Special outrigger, outrigger width 4.95m » hydraulically extendable incl. FSC-P 0711.01.18 Special outrigger, outrigger width 4.95m » hydraulically extendable incl. FSC-P OPTIONAL POSITION FSC - P has various working areas, whereby the monitoring of the outrigger width is continuously detected and the corresponding lifting capacity is released. In confined spaces, corresponding loads can also be lifted even with th

Condition: used, empty load weight: 4,926 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2021, loading space length: 7,500 mm, loading space width: 2,440 mm, loading space height: 1,500 mm, loading space volume: 27 m³, suspension: air, tire size: 385/65 R22,5, Year of construction: 2021, mileage: 456,766 km, Equipment: ABS, Unladen weight: 4,926 kg, gross vehicle weight: 36,000 kg, cargo area (L W H): 7,500 mm x 2,440 mm x 1,500 mm, tire size: 385/65 R22.5, cargo volume: 27 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, foldable underrun protection, front lift axle, electronic braking system (EBS), brake wear indicator, pendulum tailgate (overlapping), roll-up roof tarp, platform, connectors: 1 x 15-pin and 2 x 7-pin, anti-spray, light alloy rims. You can find our complete vehicle range at . Interested in financing? With our Value Added Services, we offer you tailor-made financing solutions, full service and telematics services. We are happy to advise you. Bsdpfxox N Uune Ab Dsll

Condition: used, empty load weight: 4,926 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2021, loading space length: 7,500 mm, loading space width: 2,440 mm, loading space height: 1,500 mm, loading space volume: 27 m³, suspension: air, tire size: 385/65 R22,5, Year of construction: 2021, mileage: 423,734 km, Equipment: ABS, Unladen weight: 4,926 kg, gross vehicle weight: 36,000 kg, cargo area (L W H): 7,500 mm x 2,440 mm x 1,500 mm, tire size: 385/65 R22.5, cargo volume: 27 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, foldable underrun protection, front lift axle, electronic braking system (EBS), brake wear indicator, pendulum tailgate (overlapping), roll-up roof tarp, platform, connectors: 1 x 15-pin and 2 x 7-pin, anti-spray, light alloy rims. You can find our complete vehicle range at . Interested in financing? With our Value Added Services, we offer you tailor-made financing solutions, full service and telematics services. We are happy to advise you. Blsdpfx Absy Etrke Dol

Condition: new, power: 235 kW (319.51 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 4x2, wheelbase: 3,880 mm, fuel: diesel, fuel tank capacity: 150 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, loading space length: 42,000 mm, loading space width: 24,200 mm, loading space height: 6,000 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power mirror, seat heater, soot filter, trailer coupling, - Heated exterior mirrors - Heated mirrors - Passenger seat - Leaf suspension - Differential lock - High beam - Speed limiter - Catalytic converter - Automatic climate control - Air-suspended seats - Particulate filter - PTO (Power Take-Off) - Radio/multimedia system - Rotating beacon - Reversing camera - Sliding roof - Seat heating - Sun visor - Lane departure warning system - Stability control - Windscreen Internal reference number for customer inquiries: 4-023 MAN TGM 18.320 4x2 BB WITH PAVIC 3-WAY TIPPER BODY AND PALFINGER CRANE Vehicle: * MAN TGM 18.320 4x2 BB loader crane tipper * Driver's cab CC: the compact version (narrow, short, standard height) * Wheelbase: 3,875 mm * Suspension: leaf/leaf (also available as leaf/air in the front axle) * Drive: 4x2 * Tyres: Front Axle 2x 295/80R22.5, Rear Axle 4x 295/80R22.5 * Gross vehicle weight: 18,000 kg * MAN TipMatic 12 12 OD automatic transmission * MAN D0836 LFLAP diesel engine, 235 kW (320 hp), 1,250 Nm torque, Euro 6d * Gearbox function: EfficientRoll * Cruise control * Rear axle differential lock * MEILLER Axial pump 270/45 * Tipper control in driver's cab * MAN EasyControl operating panel, 4 functions, externally operable with door open * RINGFEDER type 4040/G150B trailer hitch * 2-line brake coupling at end of chassis frame * Sun visor in front of windscreen * Central locking with remote control * MAN Media System Navigation Advanced 7 inch * Online traffic for navigation * Smartphone integration * Heated and electrically adjustable rearview and wide-angle mirrors * Air-suspended comfort driver's seat with lumbar support, shoulder adjustment, and heating * Adjustable seat belt height, driver’s seat * 2 work headlights on cab roof * 2 halogen rotating beacons on cab roof * and much more Body: * 3-way tipper body, 4,200 x 2,420 mm, manufacturer PAVIC * Front wall height: 800 mm * Side wall height: 600 mm * 8x fully retractable lashing rings recessed in the floor (4 per side) * Material: Hardox 450 * Resting platform for laying the side wall horizontally with rubber mat (for long goods transport) * Springs as side board lift aid for easier opening and closing * 2x lashing eyes on front wall (e.g., for securing a vibrating plate or grabber) * Tipper hot-dip galvanized, side walls, etc. fully painted with 2-component truck paint in RAL9016 Bsdpfxey N Tr Ej Ab Djll * Auxiliary frame galvanized and painted in RAL9011 * Left and right side one-piece, both sides can be opened pneumatically with air valve from the cab, opens all around from bottom (pendulum type), manually from top to bottom; central stanchions removable. * Springs as sideboard lift aid for easier opening and closing * Body additional equipment: Prepared mounting points in pillars for retrofitting a leaf grille (side wall extension PLUS 500 mm for e.g. hedge clippings transport) Loader crane: * Palfinger PK 14.501 K SLD 5 * PALFINGER SOLID truck loader crane with KTL coating * Hydraulic four-section extension – 11.7 m * Lifting moment 142.4 kNm (14.5 mt) * Slewing range 420° * Electronic overload protection PALTRONIC incl. emergency stop and capacity display * Operating hours counter with service interval display * Scanreco radio remote control * CAPACITY AND OVERLOAD DISPLAY...

Condition: new, power: 235 kW (319.51 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, fuel tank capacity: 150 l, color: white, driver cabin: day cab, gearing type: automatic, suspension: steel, loading space length: 42,000 mm, loading space width: 24,200 mm, loading space height: 6,000 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power mirror, seat heater, soot filter, trailer coupling, - All-wheel drive - Rear work lights - Heated exterior mirrors - Heated mirrors - Passenger seat Bljdpjy E Hx Rsfx Ab Djl - Leaf suspension - Differential lock - High beam - Catalytic converter - Automatic climate control - Air-suspended seats - Particulate filter - PTO - Radio/multimedia system - Reverse camera - Seat heating - Sun visor - Lane departure warning assistant - Stability control - Windshield Internal reference number for customer inquiries: 4-031 MAN TGM 18.320 4x4 BB WITH PAVIC 3-way Tipper Body AND PALFINGER CRANE Vehicle: MAN TGM 18.320 4X4 BB Truck-Mounted Crane Tipper Cab CC: the compact one (narrow, short, standard height) Wheelbase 3,875 mm Suspension leaf/leaf (also available as leaf/air on the leading axle) Drive 4x2 Tires front axle 2x 295/80R22.5, rear axle 4x 295/80R22.5 Total weight 18,000 kg Automatic transmission MAN TipMatic Diesel engine MAN D0836 LFLAP, 235 kW (320 hp) output, 1,250 Nm torque, Euro 6e Transmission feature: EfficientRoll Cruise control Differential lock on rear axle MEILLER axial pump 270/45 Tipper operation control in cab MAN EasyControl operation panel, 4 functions, operable from outside with door open Trailer coupling RINGFEDER Type 4040/G150B Brake connection 2-line at end of frame Sun visor in front of windshield Central locking with remote MAN Media System Navigation Advanced 7-inch Online traffic for navigation function Smartphone integration Heated and electrically adjustable wide-angle and rear mirrors Driver comfort seat air-suspended, with lumbar support, shoulder adjustment, and heating Height-adjustable driver’s seat belt 2 work lights on cab roof 2 halogen beacon lights on cab roof GSR equipment (reverse camera, turning assistant, tire pressure monitoring, etc.) Body: 3-way tipper body 4200x2420 mm, Manufacturer PAVIC Front wall height 800 mm Side wall height 600 mm 8 fully recessed lashing rings in platform floor (4 per side) Material: Hardox 450 Offset for horizontal mounting of the side wall with rubber pad (long goods transport) Springs as side wall lifting aid for easier opening and closing Tipper body galvanized and side walls, etc. completely painted with 2K truck paint in RAL9016 Subframe galvanized and painted in RAL 9011 Left and right side in one piece, can be opened pneumatically on both sides from the cab via air valve, all sides openable from below (pendulum), manual from top to bottom, removable center stanchions. Springs as side wall lifting aid for easier opening and closing Loader Crane: Palfinger PK 14.501 K SLD 5 PALFINGER SOLID TRUCK LOADER CRANE with KTL coating Hydraulic four-section extension – 11.7 m Lifting moment 142.4 kNm (14.5 mt) Slewing range 420° Electronic overload protection PALTRONIC incl. emergency stop and load display Operating hours counter with service interval display Scanreco radio remote control LOAD DISPLAY and overload PALTRONIC on remote control unit 5 selectable speeds Financing, as well as leasing or lease-purchase, is possible. This is a non-binding offer. Subject to prior sale, errors, and changes...

Condition: new, Year of construction: 2026, color: grey, overall weight: 15,000 kg, maximum load weight: 13,000 kg, empty load weight: 2,010 kg, loading space volume: 12 m³, loading space width: 2,380 mm, loading space length: 6,500 mm, loading space height: 750 mm, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, flap, lashing eyes Body: Roll-off container with drive-over rear flap, approx. 12 m³, spring-assisted. ARCHIVE IMAGES. Roll-off container according to DIN 30722-1, greasable external rollers, floor 5 mm, walls made of 3 mm steel, frame spacing 750 mm, continuous tarpaulin and net hooks, galvanized stern-side climbing rungs in compliance with UVV, foldable and spring-assisted pendulum flap, 8 x 2.5 t lashing eyes (4 per sidewall) and 2 x 5 t lashing eyes on the front wall. Lashing eyes in the floor available at extra cost. Painted in RAL 7016 anthracite grey! ACCESSORY DETAILS WITHOUT WARRANTY, subject to changes, prior sale, and errors! Bjdpjyrt Rxofx Ab Dsll

Condition: new, Year of construction: 2025, color: grey, overall weight: 15,000 kg, maximum load weight: 13,000 kg, empty load weight: 2,010 kg, loading space volume: 12 m³, loading space width: 2,380 mm, loading space length: 6,500 mm, loading space height: 750 mm, gearing type: other, driver cabin: other, Vehicle location: incoming / in transit, steel construction, flap, lashing eyes Build: roll-off container with drive-over rear flap approx. 12m³, spring-assisted, ARCHIVE PICTURES roll-off container according to DIN 30722-1, greaseable exterior rollers, floor 5mm, walls made of 3mm steel, frame spacing 750 mm, continuous tarp and net hooks, galvanized climbing irons at the front according to UVV, fold-down and spring-assisted pendulum flap, 8 x 2.5 t lashing eyes 4 per side recessed in the floor, 2x lashing eyes at the front wall, in RAL 7016 anthracite gray! All information without guarantee, as in transit! ACCESSORY INFORMATION WITHOUT GUARANTEE, Subject to alterations, prior sale and errors! Bljdpovhinujfx Ab Del

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,420 mm, loading space height: 1,750 mm, loading space volume: 30 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,230 mm, suspension: air, tire size: 385/65R22,5", tire condition: 100 %, Year of construction: 2026, - Bespoke Transport Solution - Configure to your requirements; vehicle shown for illustration only, production and specification as per customer order. #Chassis - Fine-grain steel welded construction, lightweight design, fifth wheel plate with 2 replaceable kingpins - "Curved" front-end closure, patented - Central telescopic support leg; uncoupling with a load is not possible; when uncoupled, the vehicle must stand at a rearward incline - Underrun protection, foldable - Anti-spray mud flaps on rear axle only - 2 tow hooks at the rear #Axles+Suspension - SAF disc brake axles with 430 mm disc diameter - Axles/running gear laser-aligned to reduce tyre wear and fuel consumption - Off-road specification axles #Air Suspension - 1st axle automatic lift axle, including forced lowering & pull-away assist, activated by 3x braking (pull-away assist functional up to a 30% axle load overrun and a maximum speed of 25 km/h) - Hot-dip galvanised lift-axle mechanism, 10-year warranty against corrosion perforation #Braking System - 2-line air braking system, colour-coded line routing for easy servicing - Spring-actuated parking brake - 2 mismatch-proof coupling heads at the front, without connecting line - EBS electronic braking system with EBS socket at the front, without connecting cable - Caution: this trailer may only be towed by towing vehicles that ensure the ABS remains effective! - With lifting & lowering valve Bodpfei Ri H Iex Ab Djll - Vehicle driving stability system - Automatic tipping-body lowering + shut-off valve #Wheels+Tyres - 385/65 R22.5, make at manufacturer's choice - Steel rims, factory silver #Electrics - 24 volt, multi-chamber lights, yellow LED lighting at the sides - 2 white front position lights - 2 white/red outline marker lights at the rear - 2 x 7-pin mismatch-proof sockets at the front, without connecting cable #Hydraulics - Low-pressure cylinder max. 170 bar, smallest stage hard-chrome plated, with hydraulic screw coupling, fixed part, NW 48 mm - Hydraulically operated via the truck's power take-off #Tipper Body - Aluminium box-type tipper body, high-quality abrasion-resistant material, 5 mm sloped front wall, external 30 mm hollow-chamber side walls, welded, bulk-deflecting top rail profile; interior access ladder at front wall - "Greenline" tapered, aerodynamic body shape - Membrane tailgate: tailgate designed as a pendulum flap with double-joint hinge, resting externally, with double hook locking - Tailgate with rubber seal. Note: heat-resistant up to max. 170°C - Continuous floor, 6 mm thick - Standing platform with access ladder, connection plate for air/electrics and brakes with generous clearance for optimum operability - Roll-over tarpaulin, single-sided for stowing on the right (direction of travel), with central locking on the left (direction of travel) #Operating Notes - For salt, lime etc. transport we recommend a tipping cylinder with a hard-chrome-plated piston rod to protect against corrosion - The stated gross weight is technically achievable; depending on the load, the gross weight may not be reached while complying with the permissible axle/support & fifth-wheel loads (poor handling and tracking behaviour possible due to incorrect load distribution) #Registration Country/Plates - Type approval in accordance with EC 2007/46 - 24/7 service hotline - prepared for a single-line number plate holder

Condition: new, functionality: fully functional, empty load weight: 770 kg, maximum load weight: 2,730 kg, overall weight: 3,500 kg, loading space length: 5,050 mm, loading space width: 2,000 mm, loading space height: 300 mm, Product information "HAPERT AZURE H2 3.5t 5x2m lattice extension with 13-inch parabolic suspension" Extremely sturdy high-loader from trailer manufacturer HAPERT, model AZURE H-2 3500kg 505x200. Its foldable aluminum side walls allow for versatile use. Pallets can be easily loaded from the side or rear. All flaps and corner stanchions are removable, quickly transforming the loader into a platform. The standard equipment of the Hapert flatbed trailers is very comprehensive, including sturdy aluminum side walls, a pendulum and removable corrugated mesh extension, a low 13-inch chassis, parabolic suspension with shock absorbers and a 100 km/h rating, center stanchions, eccentric locks, tie-down eyes, net hooks on the hinge bases, an automatic support wheel, an extremely sturdy welded and hot-dip galvanized steel frame, and a reinforced and bolted V-drawbar. Technical specifications can be found below. We also offer a wide range of trailer accessories for Hapert car trailers. Higher side walls, corrugated mesh extensions, side wall extensions, a raised frame for the front, loading ramps, rear supports, 100 km/h approval, a tool box, tie-down straps, and a trailer lock are available for an additional charge. ... ----- You can also get: · Financing Bledpfx Abswiwggs Del · Leasing (businesses only) · Consulting · Delivery throughout Germany (except islands) · Accessories · Rental trailers · Spare parts · Registration service for DH – HB – DEL · Service · Repairs · TÜV inspection for car trailers Ahrens Car Trailer Center, Moordeicher Landstraße 37, 28816 Stuhr near Bremen Opening hours: Monday - Friday 8:00 a.m. - 5:00 p.m.

Condition: used, Year of construction: 2017, operating hours: 1,915 h, Equipment: all wheel drive, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle subject to final confirmation, errors, typos, and prior sale: Bjdpfxszwru Ej Ab Dsll Hako CityMaster 600 with a new engine, sweeping brush with water and dirt tank, new engine, front-mounted mower, hopper spreader, snowplow (Vehicle 267) First registration: 14.12.2017 10,236 km 1,915 total operating hours, but now with a new engine! 971 brush operating hours Engine new in 2025, currently approx. 170 operating hours Engine: 1,642 ccm 24 kW / 33 hp 25 km/h approved Permissible total weight: 2,200 kg Unladen weight: 1,380 - 1,465 kg Overall length: 3,160 - 3,260 mm x overall width: 1,085 - 1,200 mm x overall height: 1,9985 - 2,202 mm Road approval Articulated steering 2 adjustable brush systems Turbine + water pump on/off Adjustable water quantity 3 speeds for operation Radio/CD Rotating beacon on driver's side, rear 2 headlights on top + 2 in the middle Rearview camera with monitor, additional camera for monitoring the suction nozzle, automatic switching during reversing Radio with Bluetooth for mobile phone and MP3 Repeating lights on cabin roof Distance sensor 7-pole control cable Universal tires 23.00x8.50-12 Trelleborg T539, front approx. 80%, rear approx. 90% Grammer comfort driver's seat with air suspension Universal suction container 600 L, hydraulically tilting, payload 500 kg, emptying height 142 cm, emptying width 865 mm Handheld suction hose for leaves, accumulated dirt, etc., foldable on the passenger side in the middle Universal quick-change roll container Vacuum gauge on container, for monitoring the suction power and indicating decreasing suction power when the maximum container filling level is reached, as well as a clogging indicator Sweeping unit: 2 brushes, hydraulically adjustable, sweeping width 110 to 180 cm, brush arms with 3-fold impact protection Disc brush made of plastic-steel Lightweight weed brush on the right Attachment: Suction nozzle, roll container sweeping unit Universal front-mounted mower 122 cm (hydraulically driven 3-blade special mower with rear discharge, working width 122 cm, integrated pendulum compensation, four-wheel drive with cutting height adjustment in 1 cm increments from 4 - 10 cm, transport safety device for road travel) Attachment: Suction nozzle mower Attachment: Suction system (transfer device for connecting the suction nozzle) Hopper spreader KIF SS200 (single-chamber spreader with fully hydraulic drive, auger discharge, mixing shaft, and foldable spreading disc, loading capacity 200 L, manual control for spreading quantity and width, working width 1.5 - 4.0 m spreading disc, protection, and discharge chute made of stainless steel) Filling sieve, foldable cover, additional protective cover for Citymaster 600. Quick-change base frame for Citymaster 6009, spreader RAL 2011 and 2-layer interior coating, container attachment 130 L, to increase the loading capacity to 330 L for light spreading materials such as salt and granules. Spreading control from the cabin, spreading quantity, spreading width with automatic start/stop function Snowplow 135 cm with breakaway function, rubber scraper blade Inspection + TÜV (technical inspection) valid until 09/2026 Price: €29,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. Place of jurisdiction for both parties up to a dispute value of €10,000 is the district court of Ludwigsl

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 3,460 mm, travel distance Y-axis: 1,615 mm, travel distance Z-axis: 400 mm, number of axes: 5, overall weight: 3,500 kg, spindle motor power: 11,000 W, spindle speed (max.): 20,000 rpm, This 5-axis MORBIDELLI Author X5 was manufactured in 2008. It features a working field of 3050 mm in the X direction, 1348 mm in the Y direction, and 400 mm in the Z direction. The machine is equipped with a powerful 11 kW spindle and a tool changer with 12 positions. If you are looking to get high-quality CNC wood machining capabilities, consider the MORBIDELLI Author X5 machine we have for sale. Contact us for further details. • Voltage: 400 V • Frequency: 50 Hz • Current: 48 A • Power supply: 400 V, 50/60 Hz • Power consumption: 28 kVA • Working field: X 3050 mm, Y 1348 mm, Z 400 mm • Rapid speeds: X 50 m/min, Y 45 m/min, Z 22 m/min • Drive system: ball screw in X/Y/Z axes • Pendulum processing: yes • Spindle: 5-axis Morbidelli milling spindle • C axis rotation: 640 degrees • B axis rotation: +/- 100 degrees • Inverter power: 18 kW • Tool holder: HSK 63F • Minimum distance table to spindle: 40 mm • Tool changer: rear tool room in X axis • Tool changer positions: 12 • Max tool diameter: 240 mm • Max tool length: 220 mm • Max tool weight: 8 kg • Work table: vacuum clamping system • Vacuum pressure: 3000 Pascal • Control system: NUM 1040 • Operating system: Windows XP Professional • Processor: 32-bit Pentium • RAM: minimum 256 MB • Hard disk: minimum 2 GB • Screen: 17 inch • Interface: RS232 • Air pressure: 6 to 8 bar • Air consumption: 250 NL/min • Dust extraction connection: 250 mm • Air speed extraction: 30 m/s • Machine dimensions: approx. 5300 x 2200 x 2500 mm • Required space: approx. 6300 x 4000 x 3000 mm • Safety equipment: CE-compliant protection system • Central lubrication: automatic • Drilling head: 12 + 6 spindles Bjdpfozuhdksx Ab Dsll • Vertical spindles (Y direction): 5 • Vertical spindles (X direction): 8 • Horizontal spindles (X direction): 4 • Horizontal spindles (Y direction): 2 • Vertical spindle pitch: 32 mm • Horizontal spindle pitch: 64 mm • Drilling speed: 4000 rpm • Drilling unit power: 2.2 kW • Drilling tool holder: M10 • Pneumatic stroke: 60 mm Additional equipment • Chip conveyor (included) • Vacuum pump 250 m3/h

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, number of axes: 3, This 3-axis IMA BIMA 410 CNC Wood Machining Centre was manufactured in 2000. It features a working area of 3000 mm in X and 1200 mm in Y, with a maximum clamping height of 100 mm. The machine is equipped with an automatic central lubrication system and AC servo motors for precise operation. If you are looking to get high-quality wood machining capabilities, consider the IMA BIMA 410 machine we have for sale. Contact us for further details. • Working area X: 3000 mm • Working area Y: 1200 mm • Max. clamping height Z1: 100 mm • Max. workpiece thickness Z2: depending on equipment/application • Table height: approx. 1000 mm • Pendulum operation X: 2 × 1400 mm • Free space center X: 200 mm • Pendulum operation alternative X: 2 × 900 mm • Free space center alternative X: 1200 mm • Machine weight: approx. 6000 kg • Guide system: precision linear guides hardened approx. 62 HRC • Central lubrication: automatic for all main axes and ball screw • Drive system: AC servo motors with encoder • X/Y drive: rack and pinion • Z drive: ball screw • Feed rate: 40 m/min • Rapid traverse X/Y: 80 m/min • Rapid traverse Z: 25 m/min • Acceleration: 3 m/s² • Extraction connection main spindle: 300 mm • Extraction connection drilling spindles: 120 mm • Air speed: approx. 28 m/s • Air volume: approx. 7080 m³/h • Vacuum pump capacity: 100 m³/h • Compressed air connection: 1/2" • Air pressure: 6 bar • Control voltage: 24 V DC • Connected load: approx. 24 kVA • Power supply: 3/N/PE 400/230 V 50 Hz • Frequency converter: 0–480 Hz • Ambient temperature: +15 to +35 °C • Control system: IMATRONIC NT 231 • Interpolation: linear all axes, circular 2.5D • Resolution: 0.001 mm • Spindle: HSK F63 • Tool clamping force: 11000 N • Max tool weight: 6 kg • Speed range: 1500–18000 rpm • Spindle power: 7.5 kW • Cooling: water cooled • CNC axis: 360° rotating • Tool magazine type: plate changer • Tool positions: 18 • Max tool length: 150 mm • Max tool diameter: 100 mm (150 mm with free сосед positions) • Max load: 60 kg • Saw unit motor: 1.5 kW Bjdpfezug Afsx Ab Dell • Saw speed: 5600 rpm • Saw blade diameter: max. 150 mm • Drilling unit: 14 spindles • Spindle stroke: 70 mm • Drive: 2.2 kW • Speed: 3150 rpm • Drill diameter max: 20 mm • Adapter head spindles: 4 • Speed max: 6000 rpm • Drill diameter max: 12 mm Table equipment: • 6 adjustable support arms • 12 suction cups 114 × 159 × 100 mm • 6 suction cups 125 × 75 × 100 mm • Vacuum system: 2-circuit clamping system • Electrical cabinet size: 2000 × 1800 × 600 mm DEFECT: • The main spindle no longer releases the interchangeable drill head

Condition: used, Year of construction: 2019, travel distance X-axis: 5,500 mm, travel distance Y-axis: 1,350 mm, travel distance Z-axis: 2,000 mm, position of the milling head: 2,5° x 2.5°, rapid traverse X-axis: 25,000 m/min, rapid traverse Y-axis: 25,000 m/min, rapid traverse Z-axis: 25,000 m/min, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,000 rpm, torque: 1,638 Nm, coolant supply: 16 bar, Equipment: documentation/manual, rotational speed infinitely variable, Manufacturer: KIHEUNG Model: D-TRAX X5500 Year of manufacture: 2019 Operating Hours Control ON: 12,578 hours Program run: 6,742 hours Spindle operation: 4,869 hours Standard Equipment: • HEIDENHAIN TNC 640 CNC control with HSCI, 19" TFT monitor, DXF converter and swiveling control panel • SIEMENS main spindle motor, 28/38 kW • 2-stage, cooled ZF reduction gearbox (1–1,000 / 1,001–4,000 rpm) • X-axis drive via TWIN-DRIVE / REDEX rack-and-pinion system with two servo motors • Y- and Z-axis drives via KORTA precision ball screws • HEIDENHAIN linear scales on all three axes with DA 400 compressed-air system • INA precision linear guideways on all three axes • Hydraulic Z-axis counterbalance with nitrogen pressure cylinder • Automatic central lubrication with pressure monitoring • Telescopic guideway covers for X, Y and Z axes • HEIDENHAIN teleservice dongle for remote diagnostics • HEIDENHAIN HR-510 electronic handwheel • RITTAL electrical cabinet with air conditioning and interior lighting • CE-compliant full enclosure with 15 mm safety glass and four front doors • Rear chip conveyor • Coolant system up to max. 8 bar, tank capacity 800 l • Ethernet interface Paint finish: Light Grey RAL 7035, Carmine Red RAL 3002 and Slate Grey RAL 7015 Optional Accessories included: • Universal automatic milling head A4 – 2.5° x 2.5° (bi-rotating, hydraulic clamping) • Horizontal chain-type tool changer for 30 tools (servo motor with HEIDENHAIN encoder) • CTS system, 16 bar – through-spindle coolant with paper-band filter system • HAMMA Germany oil skimmer • Magnetic separator • Column extension for Z-axis travel of 2,000 mm • Preparation for pendulum machining Blsdpfx Aezgw Dweb Djl Documentation: • Operating manual, maintenance manual, lubrication manual, electrical schematics, CE Declaration of Conformity and programming manual Inspection / Contact • Machine inspection available by appointment

Condition: used, empty load weight: 5,276 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2021, loading space length: 7,500 mm, loading space width: 2,440 mm, loading space height: 1,350 mm, loading space volume: 24 m³, suspension: air, tire size: 385/65 R22,5, color: yellow, Year of construction: 2021, mileage: 551,511 km, Equipment: ABS, Unladen weight: 5,276 kg, gross vehicle weight: 36,000 kg, cargo area (L W H): 7,500 mm x 2,440 mm x 1,350 mm. Tire size: 385/65 R22.5, cargo volume: 24 m³. 1st axle: , 2nd axle: , 3rd axle: , air suspension, foldable underrun protection, front lift axle, electronic braking system (EBS), pendulum tailgate (overlapping), sliding roof tarpaulin, platform, connection plugs 1x15-pin and 2x7-pin, antispray, light alloy rims. Our full range of vehicles can be found at . Interested in financing? With our Value Added Services, we offer you tailor-made financing solutions, full-service and telematics services. We are happy to advise you. Bedjxz Hunopfx Ab Djll

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Bedpfxjx Twdyo Ab Doll

Condition: used, Year of construction: 2006, * Work area: 2,650 x 1,240 mm * X-Y travel: 2,995 x 1,385 mm * Z-axis travel: 200 mm * Clearance height: 180 mm C-axis deactivated - 3-axis machine The structure of the base body is a monolithic construction made of thick-walled steel. It is reinforced throughout the machine bed by welded triangular plates, making it extremely stable. The triangular shape used for the supporting parts, with a large base, is the key to long-lasting precision and stability. The machine's layout allows the user an optimal workflow despite minimal space requirements. The base body, constructed in this way, provides the machining unit with a balanced and secure base with particularly good load distribution. The mobile unit carrier is made from a solid monoblock. It is positioned in the X-direction on prismatically ground guides via ball screw slides. The machining unit is, in turn, attached to the mobile unit carrier on prismatic, ground guides and the ball screw slide. Description of units and accessories (base) Drilling unit: Drilling head with 12 + 6 spindles * 7 individually selectable vertical spindles in X * 5 individually selectable vertical spindles in Y * 4 horizontal spindles in X (2+2) * 2 horizontal spindles in Y (1+1) * Speed: 4,000 1/min * Power: 2.2 kW * Grid: 32 mm * Drill chuck: M 10 with Morse taper No. 11 Nut saw unit in "X": * Integrated in the drilling head * Nut saw blade with a diameter of up to max. 120 mm Main milling unit (Position 2): * Tool holder HSK 63F * Speed 1,500 - 24,000 1/min, stepless via inverter * Motor power 4.4 kW (6 hp) from 12,000 1/min (S1) * Motor power 6.6 kW (9 hp) from 12,000 1/min (S6) Blsdpox Twccofx Ab Dsl * Right/left rotation * Ceramic bearings * Scope of supply: 4 pcs. tool holder (right) without collet Tool changer R8L Automatic tool changing device for 8 tools. Mounted on the rear unit carrier for quick access to the tools. * Number of tool positions: 8 * Max. tool diameter: 120 mm * Max. weight per tool: 4.5 kg * Max. total weight of all tools: 22 kg * Holder for 1 angular gear * Mounted and moving in X Horizontal milling unit (Position 1) Horizontal unit with two opposite outlets for milling and grooving. * Speed 9,000 - 18,000 1/min, stepless via inverter * 1 outlet for collet 3-20 mm (ER 32) * 1 outlet for saw/collet 3-12 mm (ER20) (For saw D=120 mm / bore 50 mm) * Motor power 3 kW (4 hp) * Max. tool diameter, front milling: 20 mm * Max. tool length, front milling: 110 mm * Max. tool diameter, rear milling: 12 mm * Max. tool length, rear milling: 80 mm * Max. saw blade diameter: 100 mm * Bore in saw blade (ER 32): 50 mm * Arbor diameter, saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum "freedom of movement". The vacuum quick-clamping system offers maximum flexibility with precise positioning and optimal workpiece clamping. * 6 supports 1000 mm, stepless pneumatically adjustable in X * 12 vacuum suction cups, round D = 110 mm, steplessly adjustable in Y (2 pcs. per support) * 2 stops in X (1 x left / 1 x right) * 1 stop in Y per support (total 6 pcs.) * The retractable reference stops are CNC-controlled * Pendulum machining standard (2 working areas) --- other clamping systems are available as optional extras --- Axis movement The drive system in X, Y and Z is via ground ball screws.

Condition: used, Year of construction: 2018, CNC-CONTROLLED MACHINING CENTER AUTHOR M 200 AUTHOR M200 3710x1620 Z250 - CNC-controlled machining center 1 Technical data Work area I.M.S. I.U. Work area X-axis 3710 mm * 146" * Work area Y-axis 1620 mm * 63¾" * Workpiece passage Y 1900 mm 74¾" Workpiece passage Z 250 mm 9¾ Workpiece length for pendulum machining 1700 + 1700 mm 67" + 67" Travel speed of the X-Y axes PRO-SPACE 56 m/min 184 ft/min Travel speed of the X-Y axes PRO-SPEED 78 m/min 256 ft/min * Distance covered by all tools in the X and Y direction; see the corresponding layout for further details. With a 5-axis motor, the dimension in Y increases to 1680mm (66"), for motor JQX or 1720mm (67½") for motor KS/KT max. Width of the loadable plate for horizontal drilling, electric spindle only oriented vertically, no central reference stops Installation data I.M.S. I.U. Installed power 23 - 28.5 KVA Electrical standard specifications 400 Voltage 50 Hz 3 phases Air consumption 450 Nl/min Compressed air consumption 4500 m³/h 2650 CFM Extraction air velocity 30 m/sec Extraction nozzle diameter 250 mm 9.8 Inches Noise level VSA * LAV * Drilling 72.2 74.6 Milling 74.3 80.7 Reference standard EN ISO 11202:1995* VSA = unloaded and without extraction * LAV = in operation with extraction Structure of the base body: The CNC machining center can be equipped flexibly with different milling units as well as multi-spindle drilling heads and many other units, up to dowel drilling units. In order to meet all requirements in the field of wood and plastic processing, as well as the demands of the users, each machine can be equipped with 3, 4 or 5 machining axes. The selection of drilling units extends to up to 34 drilling spindles with an integrated groove saw for the back panel groove or rabbet machining. The possibility of using this high-quality CNC machining center both as a cantilever table machine and with an aluminum grid table underscores the flexible range of applications and the performance of the M100 and M200 series. Powerful drilling heads, with individually selectable drilling spindles, max. RPM 8,000, and implemented in . technology, "the most robust drilling spindles on the market", with more than 1,000 maintenance-free application hours (lubrication interval of the drilling spindles). The possibility of being able to replace the drilling spindles within a very short time, "even without a technician", through the technology, without disassembling the drilling gear, sets a benchmark in the industry and is already standard on your machining center. Imagine your CNC machine performing hinge drilling in just one drilling operation (option), instead of the usual 3. An option that underscores our claim to offer you robust and high-performance units on our machines. Ideally and flexibly equipped for a wide variety of requirements. Whether manual or automatic, the FLEX cantilever work table allows vacuum cups and mechanical clamping elements, such as pneumatic clamps for window or curtain wall constructions (option), to be quickly, safely and cost-effectively adjusted to any material and clamping requirements, making your day-to-day work easier. Differently sized vacuum cups and clamping elements, which were developed in close cooperation with customers and users, are available as an option. Bledpfx Abozvhkyo Dol

Condition: used, maximum load weight: 28,900 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2012, next inspection (TÜV): 09/2026, loading space volume: 47 m³, total length: 10,750 mm, total width: 2,550 mm, total height: 3,600 mm, Equipment: ABS, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors and omissions excepted, and with the right to sell in the meantime: Reisch, approximately 47 cbm grain hopper with combination pendulum flap (Vehicle 148) First registration: June 12, 2012 Type RHKS-35/24 AL Permissible total weight: 35,000 kg Bljdpfx Abezv Hbdo Dol Unladen weight: 6,100 kg Payload: 28,900 kg Overall length: 10,750 mm Overall width: 2,550 mm Overall height: 3,600 mm TÜV (technical inspection): 09/2026, SP (safety inspection): 03/2027 Smooth walls Roll cover, platform Combination pendulum flap Grain slide Doors 1/3 + 2/3 + pendulum flap 2 x 12-ton, 2-speed geared winch 2 x wheel chock 1st axle: lift axle BPW drum brakes Tires: 385/65R22.5, 1) approximately 60/40%, 2) approximately 40/60%, 3) approximately 80/80% Storage box, plastic, driver’s side, center; dust bag, passenger side Smooth floor and walls EWABCO ABS Air suspension with raising and lowering function Price: €14,000.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties is the local court of Ludwigslust for disputes up to €5,000.00; for disputes exceeding this amount, it is the regional court of Schwerin. Errors and omissions excepted, subject to prior sale.

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 850 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 24,000 rpm, spindle motor power: 11,000 W, number of axes: 4, This 4-axis Elumatec SBZ-140 was manufactured in 2010. It features a maximum profile length of 7600 mm and a Y-axis travel of 850 mm, making it suitable for machining aluminum and thin-walled steel profiles. The machine includes an air-cooled spindle with a maximum speed of 24,000 rpm and a tool magazine capacity of 8 positions for efficient operation. If you are looking to get high-quality machining capabilities, consider the Elumatec SBZ-140 vertical machining centre we have for sale. Contact us for further details. Bjdpfx Abjzaq Eis Djll • Application: Machining of aluminum and thin-walled steel profiles • Operating system: Windows • Machining capabilities: Milling, drilling, tapping, end machining • Continuous machining range: 0°–180° • Working area: • Max. profile length with end machining: 7480 mm • Max. profile length without end machining: 7600 mm • Axis travels: • A-axis rotation: 0°–180° • A-axis programming increment: 0.1° • Axis speeds: • Y-axis: up to 60 m/min • Z-axis: up to 60 m/min • Spindle: Air-cooled • Tool magazine: 8 positions, co-moving for fast tool changes, expandable system • Machine features: Stationary profile machining, fast automatic tool changes, suitable for aluminum and thin-walled steel profiles, two machining zones (optional) • Pneumatic system: 7 bar required, approx. 180 l/min air consumption (with spray system) • Electrical data: 400 V / 3-phase / 50 Hz, main connection 63 A • Control panel: 15” color display, USB interface, LAN connection Additional equipment • Angle head set (0°, 90°, 180°, 270°) for end machining and double profiles • Pendulum mode / 2 working zones (optional configuration)