Used Perforate for sale (857)

Condition: used, maximum load weight: 22,160 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 12/2006, loading space length: 10,510 mm, loading space width: 2,470 mm, loading space height: 2,200 mm, loading space volume: 57 m³, total width: 2,530 mm, total height: 3,450 mm, Equipment: ABS, BÖSE swivel wall structure "roof", screen-printed floor, 4 x perforated rails in the floor and ceiling for telescopic rods, MBB tail lift type: 2000K, max. load capacity 2000 kg, battery box for LBW, external start socket, support winch(s), reversing camera, ABS, EBS, BPW EcoPlus axle(s), 2nd axle(s) with TRIDEC forced steering, disc brake system, air suspension with lifting and lowering device, vehicle can be covered with advertising and/or labeled Hodpfxjvnqw Re Ab Ujpa Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: used, This listing is for a LTE Scientific Unitemp filtered air drying Cabinet The unit is in full working condition and is ready for immediate release LTE Scientific Unitemp Filtered Air Drying Cabinet The LTE Scientific Unitemp Filtered Air Drying Cabinet is designed to provide a controlled, contamination-free environment for drying laboratory equipment. Featuring a fine filter on the air intake, it minimizes particulate contamination, ensuring that freshly washed items remain clean throughout the drying process. Key Features: Capacity: 534 liters, offering ample space for various laboratory drying needs. Temperature Control: Thermostatically controlled with a range from 5 °C above ambient to 65 °C, protected by an over-temperature cut-out device for safety. Air Circulation: A fan circulation system ensures even heat distribution for consistent drying. Construction: Toughened plate glass door for easy monitoring and access. Additional Drying Cabinet Options: Hpodpfxexv D Eyj Ab Uoa Economy Drying Cabinets Large capacity cabinets available at an economical price. Heaters are positioned at the bottom of the cabinet below a perforated base plate and vent through the top. Fan extraction models enhance drying efficiency by actively drawing air through the chamber. Temperature is controlled via a regulator.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Duplo DC-645 Multifinisher year 2007 standard equipment currently running in production Hpodpfxex Eikao Ab Usa

Condition: new, empty load weight: 6,565 kg, maximum load weight: 32,435 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,800 mm, loading space volume: 94 m³, total length: 13,620 mm, suspension: air, tire size: 385/65 22,5, tire condition: 100 %, color: silver, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, Reference no. for inquiries: 998877 Krone, SD * Year of manufacture: New vehicle * ABS, Anti-lock Braking System * Air suspension * Lift axle * Brand new tarpaulin * Neutral tarpaulin * Edscha / sliding roof cover * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Lashing perforation in the outer frame (Multilock outer frame) * Portal doors * Pallet box * Air connection coupling head (red + yellow) * Connecting plug 2x7-pin * Connecting plug 15-pin * Lifting and lowering device * Storage box / toolbox * Suspension type: air * Gross weight: 39,000 kg * Unladen weight: 6,565 kg Hodpfx Absv Th N Uj Uepa * Payload: 32,435 kg * Perm. gross weight: 39,000 kg * Axle manufacturer: Krone * Tire condition 1st axle: 100% -- 100% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 100% -- 100% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 100% -- 100% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Internal dimensions: L=13,620 mm, W=2,480 mm, H=2,800 mm * Internal volume: 95 m³ * Pallet spaces: 34 * TPMS = Tire Pressure Monitoring System * Smart Tyre Monitoring as per ECE R141 * Telematics: KSC ProPlus Dry 2 Disclaimer: Subject to change, prior sale, and errors. More images and videos are available on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast and easy financing options * Application for all (export) documents * Procurement of export license plates / customs plates * Vehicle reconditioning: new tarpaulins, labelling, paintwork, etc. * Professional loading / load securing * TÜV approvals, registration service * Transfer of commercial vehicles Please contact our trained specialist staff – we are happy to advise you.

Condition: good (used), functionality: fully functional, machine/vehicle number: WSM00000003420327, empty load weight: 7,460 kg, maximum load weight: 28,540 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2023, next inspection (TÜV): 08/2025, loading space length: 15,000 mm, loading space width: 2,480 mm, loading space height: 2,760 mm, loading space volume: 102 m³, suspension: air, tire size: 385/65 R 22.5, tire condition: 90 %, color: black, trailer brake: trailer braked, Year of construction: 2023, Equipment: ABS, our vehicle number: # 30065 Schmitz Cargobull SCS 24/L - 15.00 EB Standard curtainsider Steering axle A3 Manual and electro-pneumatic steering axle lock Sliding curtain Power curtain on both sides Cut-resistant tarpaulin Sliding roof RSAB (RoofSafetyAirbag) Portal doors Double internal pivot rods Perforated outer frame 14 pairs of lashing eyes 4 tons 5 pairs of lashing eyes 2 tons 4 pairs of ferry lashings RoRo transport Forklift truck accessible 7,100 kg Wear plate loading floor rear Schmitz axles Disc brakes Tires 385/65 R 22.5 approx. 90% Continental Air suspension Raise/lower ABS EBS Hpedpfx Ajv Efl Rob Uoa Side Underrun protection Jost seat supports Jost rear supports Schmitz Trailer Connect Tool box LED lighting Document box LaSi load securing certificate EN 12642 XL Drinks certificate Rental purchase or financing also possible on request!

Condition: good (used), Year of construction: 2018, Sepamatic 410 Separator Hpjdpfx Aou Nhdneb Uea Sepamatic 410 is used for separating raw meat material from waste components, such as cartilages, veins, skin and bones. This machine is used for increase grade and separating raw meat material for meat mechanical processing and meatbone residue. Raw material retract between high-elastic clamping band and steel perforated drum circling together and go through brief pressing operation. Hard, big and agglutinate parts stay outside the drum but softened parts are pushed inside the drum through the holes. Productivity depends from the raw material is used, clamping pressure and size of the holes of drum. Technical details: Capacity: 200-800 kg\h Drum :  1.3 and 5 mm Power consumption: 2,2 kW Dimensions (LxWxH): 1800 x 750 x 1350 mm Weight: 300 kg Year: 2018

Condition: used, maximum load weight: 22,160 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 12/2006, loading space length: 10,510 mm, loading space width: 2,470 mm, loading space height: 2,200 mm, loading space volume: 57 m³, total width: 2,530 mm, total height: 3,450 mm, Equipment: ABS, BÖSE swivel wall structure "roof", screen-printed floor, 4 x perforated rails in the floor and ceiling for telescopic rods, MBB tail lift type: 2000K, max. load capacity 2000 kg, battery box for LBW, external start socket, support winch(s), reversing camera, ABS, EBS, BPW EcoPlus axle(s), 2nd axle(s) with TRIDEC forced steering, disc brake system, air suspension with lifting and lowering device, vehicle can be covered with advertising and/or labeled Hpodpfovnqwqex Ab Uja Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: used, This listing is for a Belimed PST 11-6-18 HS2 Steam Sterilizer. The unit is in excellent working condition and ready for immediate release. The Belimed PST 11-6-18 HS2 is a high-capacity pharmaceutical autoclave designed for saturated steam sterilization of laboratory and production equipment, including heat- and moisture-stable porous and non-porous loads. Equipped with an integrated Filter Integrity System (FIS), it ensures reliable sterilization and validation compliance in regulated environments. Engineered by Belimed Life Science in Germany, this system delivers precise temperature control, high process reliability, and full compliance with GMP/cGMP standards, making it ideal for research, pilot, and GMP production facilities. The HS2 configuration features a double-door chamber, water-jacket cooling, vacuum-assisted drying, and a user-friendly B-Touch interface with integrated process control. It is optimized for efficient sterilization cycles with minimal operator intervention. ----- Key Features - GMP-ready design supporting pharmaceutical-grade sterilization processes (6050/6065) - Integrated Filter Integrity System (FIS) for real-time monitoring and validation compliance - User-friendly B-Touch touchscreen interface with Siemens WinCC Unified or Rockwell FT Optix - Water-jacket cooling and vacuum drying for rapid cooling and effective drying of chamber loads - Double-door HS2 configuration optimized for ergonomic loading and unloading - High-quality AISI 316L stainless steel construction with hygienic surface finishes (Ra < 0.8 µm) - Automated operation with redundant sensors and independent measurement circuits for reliable sterilization - Compliance with GAMP5, 21 CFR Part 11, Annex 11, and optional ASME BPE certification - Supports modular accessories including trolleys, batch carts, perforated or wire-mesh shelves, and cleanroom integration ----- Technical Specifications - Manufacturer: Belimed Life Science (Germany) Hpsdsxmi Hqopfx Ab Usa - Model: PST 11-6-18 HS2 - Sterilization Processes: 6050 / 6065 (Steam, Pre-Vacuum, Gravity) - Filter Integrity System (FIS): Yes - Chamber Dimensions (W × D × H): 1200 × 600 × 1800 mm - Usable Chamber Volume: 1,296 L - External Dimensions (H × W × D): 2100 × 2350 × 1910 mm - Weight: Approximately 1,300 kg - Chamber Material: AISI 316L Stainless Steel - Surface Finish: Ra < 0.8 µm (≤ 0.6 µm optional) - Door Type: Double-door HS2 - Loading Type: Ground loader (GR) - Cooling System: Water-jacket cooling - Vacuum System: Integrated water-ring vacuum pump with optional water recovery - Control System: B-Touch interface with PLC - Electrical Supply: 400 V / 50 Hz (other voltages optional) - Compliance: GMP / cGMP, 21 CFR Part 11, Annex 11, ASME BPE options - Year of Manufacture: Available on request - Serial Number: Available on request ----- Applications Ideal for terminal sterilization in pharmaceutical and biotechnology industries, including: - Sterilization of laboratory glassware and equipment - Sterilization of production equipment and components - Sterilization of liquids in open containers - Sterilization of porous and non-porous loads For more information or to schedule a viewing, please contact: Phone: Email:

Condition: new, empty load weight: 3,080 kg, maximum load weight: 11,320 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 205/65 R 17,5, color: other, gearing type: other, front tire size: 205/65 R 17,5, rear tire size: 205/65 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 820 mm, vehicle interior width approx. 2,480 mm, front wall galvanized steel, 600 mm aluminium drop sides foldable and removable, 3 stake pockets in the middle for 80 x 80 stakes, removable stakes, 6 x lashing brackets, outer frame with lashing eyes, reinforced gear support winch with load and fast gear, contour marking and side collision protection, mudguards and spray mist suppression, rear, , Surcharge for front wall grille 1.600 mm high (perforated plate), price: 1,400 Euro, , Surcharge for aluminum ramps load capacity per pair 9 t and 2 x folding supports rear, price: 1,800 Euro, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Hpedpfx Asx Aqz Iob Uea

Condition: used, turning diameter over bed 420 mm Hpjdpfx Asxxb E Ajb Uoa turning diameter over slide rest 215 mm centre distance 750 mm centre height 210 mm hollow 52 mm 3-jaw chuck Röhm Ø 250 mm spindle turning speed range 31 - 1600 U/min connected load 7,5 kW dimensions ca. 2050x1350x1250 mm number of spindle speeds 18 weight of the machine ca. 1,5 t - Multifix steel holder - Rotary chuck guard - Work light - Chip guard - chip tray perforated plate at the side (shown in the pictures) is not included

Condition: good (used), functionality: fully functional, machine/vehicle number: WSM00000003420330, empty load weight: 7,460 kg, maximum load weight: 28,540 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2023, loading space length: 15,000 mm, loading space width: 2,480 mm, loading space height: 2,760 mm, loading space volume: 102 m³, suspension: air, tire size: 385/65 R 22.5, tire condition: 90 %, color: black, trailer brake: trailer braked, Year of construction: 2023, Equipment: ABS, our vehicle number: # 30064 Hodpjv Efktofx Ab Uspa Schmitz Cargobull SCS 24/L - 15.00 EB Standard curtainsider Steering axle A3 Manual and electro-pneumatic steering axle lock Sliding curtain Power curtain on both sides Cut-resistant tarpaulin Sliding roof RSAB (RoofSafetyAirbag) Portal doors Double internal pivot rods Perforated outer frame 14 pairs of lashing eyes 4 tons 5 pairs of lashing eyes 2 tons 4 pairs of ferry lashings RoRo transport Forklift truck accessible 7,100 kg Wear plate loading floor rear Schmitz axles Disc brakes Tires 385/65 R 22.5 approx. 90% Continental Air suspension Raising/lowering ABS EBS Side Underrun protection Jost seat supports Jost rear supports Schmitz Trailer Connect Tool box LED lighting Document box LaSi load securing certificate EN 12642 XL Drinks certificate Rental purchase or financing also possible on request!

Condition: as good as new (ex-display), Year of construction: 2025, Quiet and slow runner WL 4/18,5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with logspacer:600 x 1050 mm hopper capacity: approx. 0,6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Hodpobtnftsfx Ab Uspa Number of knives: 28 pieces Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Control cabinet Electrical control Star-delta start-up Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Top equipment Location: Ex stock Bitburg - immediately available - at a special price

Condition: used, maximum load weight: 11,950 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2008, loading space length: 6,510 mm, loading space width: 2,475 mm, loading space height: 2,220 mm, loading space volume: 36 m³, total width: 2,550 mm, total height: 3,500 mm, Equipment: ABS, tail-lift, ORTEN swivel wall superstructure "canopy", with electrically controlled hydraulic pump, 4 x perforated rail in the floor and ceiling for telescopic poles, screen-printed floor, DAUTEL tail lift type: 2000-47 S / pre-fitting, max. load capacity 2000 kg, JOST support winches at the rear and front, Duo-Matic coupling head, reversing camera, SAF axle(s), ABS, EBS, air suspension, disc brake system, vehicle can be fitted with advertising and/or lettering Hpedsvnqvgepfx Ab Uja Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us!

Condition: excellent (used), TIRA Type: TCZ 4022 S -2K Description: Air-cooled climate simulation cell System structure: The system consists of the following main components: Walk-in, insulated cell Air treatment room Humidification system Machine room Switch cabinet Technical data: Performance range for temperature testing: Temperature range -40...+140°C Temperature constancy, in the supply air: (time-wise) ≤ ± 0.5°C without them. Test room load according to (DIN 50011 Τ13) EN 60068 Temperature constancy, in the supply air: (spatial) ≤ ± 1.0°C without thermal test room load according to (DIN 50011) EN 60068 Heating rate (according to DIN 50011) approx. 2.0 K/min without thermal test room load (according to DIN 50011) EN 60068) or test material in the temperature range of -30°C...+85°C Cooling rate (according to DIN 50011) approx. 2.0 K/min without thermal test room load (according to DIN 50011) EN 60068) or test material in the temperature range of -30°C...+85°C Performance range for climate test: Temperature range +10...+90°C Humidity working range 10...approx. 95% r.H without thermal test room touch Dew point temperature range +5...+89°C without thermal test room touch Humidity constancy (in the supply air) (time-wise) ≤ ± 2.5% r.H measured in the supply air Performance range for climate testing with heat compensation Temperature range + 15...+ 80°C Humidity 15...approx. 80% r.H without thermal test room load with max. 16 kW heat compensation Dew point temperature range +10...+74°C without thermal test room touch Dimensions: test room (WxDxH) approx. 2260 x 4648 x 2260 mm Dimensions: external dimensions (WxDxH) approx. 2660 x 6460 x 2800 mm clear doorway test room door (W x H) 2260 x 2260 mm climate module KB 127 (W x D x H) 1700 x 800 x 1400 mm switch cabinet (W x D x H) 800 x 500 x 2000 mm design: air flow: supply air: perforated sheet on the rear wall, in the ceiling area exhaust air: perforated sheet on the rear wall, in the floor area temperature control: direct cooling by evaporation of refrigerant in a finned heat exchanger: heating with electric resistance heater dehumidification: direct dehumidification by evaporation of refrigerant in a heat exchanger interior paneling: stainless steel outer paneling: sheet steel, galvanized, plastic-coated floor design: stainless steel, floor load 15000 N/m² wheel load (contact surface ≥4cm²) 1500 N/wheelDoor: double-leaf door, stainless steel, painted on the outside with viewing window (WxH) l000xl000 mm Test room lighting: 4 spotlights of 500 W each Insulation Two-layer insulation, 80 mm PUR foam, 120 mm mineral wool Refrigerator (1 piece) Bltzer 6G-30.2Y Refrigerant, R449A! Refrigeration machine oil SEZ 32 Steam humidifier (1 piece) EDB 40Color: Cell RAL9010, white Door RAL9010, white Machine unit RAL 7032, pebble gray Control cabinet RAL 7032, pebble gray Mass: Total system approx. 4900 kg Hpsdpfx Abjvx S Hhs Uea Machine set KB 127 approx. 750 kg Control cabinet approx. 120 kg Humidification system approx. 64 kgConnections: Nominal voltage 400 V +6%/-10% 3/PA 50Hz Nominal power 95 kW Nominal current 150 A

Condition: used, Year of construction: 2010, Horizon AFC-566F: Fully Automatic Combination Folding Machine, used The Horizon AFC-566 F combines high efficiency with easy operation, allowing even inexperienced users to quickly achieve creative folding solutions. With 17 pre-programmed fold types, fully automatic settings, and intuitive Touch&Work technology, you can maximize productivity and handle any challenge. Hpodpfx Asx Apbmob Uja Folding Units - 1st Folding Unit: 6 folding pockets - 2nd Folding Unit: Folding knife plus 2 folding pockets Key Features - Versatility: Handles a wide range of fold types, from simple parallel folds to complex cross and specialty folds - Fully Automatic Settings: From feeder to roller gap adjustment - Touch&Work Technology: For easy and intuitive operation - 17 Standard Fold Types: For diverse folding options - Job Memory: Stores up to 200 jobs - Double Sheet Detection and Sheet Run Monitoring: Ensures high precision - Creasing and Perforating Device: For additional finishing options - Quick Setup: Ready in seconds for maximum efficiency Specifications: - Paper formats: Maximum size: 558 x 850 mm; Minimum size: 128 x 148 mm - Paper weights: 40 – 250 g/sqm - Speed: Maximum: 240 m/min; 30,000 cycles/h in cross fold - Feeder pile height: 740 m - Machine dimensions: Main body: 3,100 mm x 1,090 mm x 1,680 mm (LxWxH); Delivery: 1,320 mm x 600 mm (LxW), height variable - Weight: 1,270 kg - Power supply: 400 V, 5.6 A, 3.2 kW All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: good (used), Year of construction: 2006, Ref:10979 . 2006 Heidelberg Stahl TH82/64K-RFH 16pp High performance all buckle folding machine with computerised auto set-up of fold plates & rollers. Comprising; • RFH82 continuous loading round pile feeder with air stream table designed for high run lengths • With low operator strain, double wheel suction head for wide format sheets. • Digital microprocessor control with touch screen display for automatic setting of fold plates and roller pressures with learning function for signature length, suction & spacing with run monitoring, integrated total and batch counter with memory. • Touch-screen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. • Setting adjustments can be made outside the machine ‘on the fly’. • Sound hoods covering all buckle units. Hpedpfx Ajwxw Sneb Uea • SBP.D presser/stacker delivery unit. Including compressor, tools, spares & manuals. Accessories: Electronic gate-fold plate with control unit (to be confirmed). VFZ mobile electronic ‘Z’ knife 32 page fold unit. Folding sequence: 1st buckle unit - 82cm with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - 66cm with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - 56cm with 4 plates, perforating/scoring shafts VFZ mobile electronic knife fold. Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Min: 14 x 18 cm Fold length, Min: 6 cm Mechanical speed : 50 - 230 m/min Folding production : Max. Buckle 50,000 s.p.h. Option of: 2010 Palamides Alpha 500 Plus Presser/Stacker

Condition: good (used), functionality: fully functional, machine/vehicle number: WSM00000003420326, empty load weight: 7,460 kg, maximum load weight: 28,540 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2023, next inspection (TÜV): 08/2025, loading space length: 15,000 mm, loading space width: 2,480 mm, loading space height: 2,760 mm, loading space volume: 102 m³, suspension: air, tire size: 385/65 R 22.5, tire condition: 90 %, color: black, trailer brake: trailer braked, Year of construction: 2023, Equipment: ABS, our vehicle number: # 30063 Schmitz Cargobull SCS 24/L - 15.00 EB Standard curtainsider Steering axle A3 Manual and electro-pneumatic steering axle lock Sliding curtain Power curtain on both sides Cut-resistant tarpaulin Sliding roof RSAB (RoofSafetyAirbag) Portal doors Double internal pivot rods Perforated outer frame 14 pairs of lashing eyes 4 tons 5 pairs of lashing eyes 2 tons 4 pairs of ferry lashings RoRo transport Forklift truck accessible 7,100 kg Wear plate loading floor rear Schmitz axles Disc brakes Tires 385/65 R 22.5 approx. 90% Continental Hedpfjv Efccex Ab Uopa Air suspension Raising/lowering ABS EBS Side Underrun protection Jost seat supports Jost rear supports Schmitz Trailer Connect Tool box LED lighting Document box LaSi load securing certificate EN 12642 XL Drinks certificate Rental purchase or financing also possible on request!

Condition: as good as new (ex-display), Year of construction: 2025, Quiet and slow runner WL 4/18,5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with logspacer: 600 x 1050 mm hopper capacity: approx. 0,6 m³ Working width of the rotor: 600 mm Hpsdpfobunq Hex Ab Uoa Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Control cabinet Electrical control Star-delta start-up Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Location: 54634 Bitburg Immediately available

Condition: used, maximum load weight: 11,950 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2008, loading space length: 6,510 mm, loading space width: 2,475 mm, loading space height: 2,220 mm, loading space volume: 36 m³, total width: 2,550 mm, total height: 3,500 mm, Equipment: ABS, tail-lift, ORTEN swivel wall superstructure "canopy", with electrically controlled hydraulic pump, 4 x perforated rail in the floor and ceiling for telescopic poles, screen-printed floor, DAUTEL tail lift type: 2000-47 S / pre-fitting, max. load capacity 2000 kg, JOST support winches at the rear and front, Duo-Matic coupling head, reversing camera, SAF axle(s), ABS, EBS, air suspension, disc brake system, vehicle can be fitted with advertising and/or lettering Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. Hodpfx Asvnqucsb Uopa We would be pleased to make you a financing or leasing offer for this object. Please contact us!

Condition: new, Year of construction: 2025, table length 3048 mm table width 1524 mm burner heads 1 Control CNC workpiece weight 1450 kg traversing speed 200 m/min weight 5010 kg dimensions of the machine ca. 9450 x 2240 x 2520 mm Laser cutting machine with automatic shuttle table Configuration 1. BodorPower laser source 12 kW 2. BodorGenius laser cutting head with autofocus 3. BodorThinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Stretched aluminum portal 6. One-click fully automatic processing 7. Automatic layout of residual material 8. Edge detection and automatic zeroing of the focal length through intelligent detection 9. Bodor Lightning perforation technology 10. 21.5-inch monitor with touch function 11. Intelligent control of gas pressure Hpodpfxswmwwmj Ab Uoa 12. Automatic adjustment of cutting gas pressure 13. Bodor Mango® ergonomic remote control 14. Active anti-collision function 15. Intelligent vibration protection 16. Intelligent adjustment to overheating 17. Gas-saving nozzles with stable flow 18. Intelligent maintenance reminder 19. WIFI internet connection 20. Water cooling 21. Dust removal function 22. Safety light curtains 23. Extraction 24. Wear parts set CUTTING CAPACITY: STRUCTURAL STEEL 35 mm STAINLESS STEEL 35 mm ALUMINUM 25 mm OPTIONAL: LANTEK EXPERT II CUT software incl. post-processor

Condition: excellent (used), Year of construction: 2017, operating hours: 6,000 h, Ref: 11015 . 2017 Heidelberg Stahl BUH 56/44-FP Excellent condition - ONLY 6,000 hours worked! Hedpfxsxlc Acs Ab Uepa B2 size buckle folder, 8pp+ with auto setting. Equipped with: Flat pile feeder with Tremat suction head Touch screen control for auto set-up Auto setting of buckle plates & rollers 2 x buckle units with 4+4 plates Anti-noise hoods SPH-70 stream delivery with pressing. Folding configuration: Buckle unit 56 cm with 4 plate folds, perforating/scoring shaft Buckle unit 56 cm with 4 plate folds, perforating/scoring shaft Specification: Sheet size, Max: 56 x 90 cm Min: 14 x 18 cm Fold length, Min: 4 cm Paper weight 40-250 gsm Mechanical speed, Max: 9,000 sheets/hr. Folding production, Max: 200m/min.(buckle unit) Option of: 2010 Palamides Alpha 500 Plus Presser/Stacker

Condition: new, Year of construction: 2025, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Hpjdpjh Hnp Dsfx Ab Uja Technical specification WL 6 / 18.5 kW hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - Contact pressure

Condition: new, Year of construction: 2025, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. Hodpfx Ash Eiw Ieb Uspa enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Vqwemi Technical specification WL 6 / 18,5 kW Hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - On

Condition: new, Year of construction: 2025, Automatic sanding machine KÜNDIG PERFECT-3 1350-REdXi_LL/Bs incl. structure unit Robust 3-belt sanding machine for the highest demands Constant working height thanks to top section adjustment Working width 1350 mm Passage height max. 205 mm (up to 18.5 kW main drive motor) Sanding belt dimensions for "R" and "Ed-L": 1350 x 2000 mm Sanding belt dimensions for "Xi-L": 150 x 4700 mm Unit "R" contact roller ➢ Grooved rubber contact roller hardness 80 Sh ➢ Contact roller level infinitely height-adjustable via touch screen ➢ Motorized lifting/lowering of the contact roller according to unit selection ➢ Increased sanding belt speed Unit "Ed-L" sanding pad diagonal ➢ Electronic sanding pad with segment width 22 mm (swiveling special version), with variable edge pressure, automatic pressure control and storage of the sanding pad segments ➢ Infinitely variable sanding belt speed (with PLC storage) ➢ Additional sanding pad insert "Xi-L" cross sanding unit in the machine frame Electronic sanding pad with segment width 22 mm with variable edge pressure, automatic pressure control and storage of the sanding pad segments ➢ Cross sanding belt supported by lamellar belt ➢ Infinitely variable sanding belt speed (with PLC storage) Perfect-3 1350-REdXi-LL - Main motors ➢ 1st unit: 18.5 kW (25 hp) / ➢ 2nd unit: 11 kW (15 hp) / ➢ 3rd unit: 16 kW (MPM) (22 hp) / 400 V/50 Hz 400 V/50 Hz 400 V/50 Hz - Workpiece feed ➢ Fabric-reinforced rubber transport carpet ➢ Rubberized carpet drive roller ➢ Motor: 2.2 kW (3 HP) / 400 V/50 Hz ➢ Speed: infinitely variable 3 - 15 m/min - Vacuum device ➢ On feed table ➢ Additional perforation of the transport carpet over 200 mm ➢ Vacuum generator: 2.2 kW (3 hp) / 400 V/50 Hz Hsdpfjr Hr Dzjx Ab Uspa - Sanding belt cleaning ➢ Air blade for sanding belt cleaning of the two units "Ed-L" and "Xi-L" insert-controlled, with suction ducts and driven by blower 1.1 kW (1.5 HP) 400 V/50 Hz - Pressure elements ➢ Inlet: ➢ Intermediate units: ➢ Outlet: parallel spring-loaded, ground steel pressure roller ⌀ 50 mm rubberized pressure roller ⌀ 50 mm Rubberized pressure roller ⌀ 50 mm 1. grooved rubber contact roller, 80 sh. 2.diagonal sanding pad with lacquer finish and air blade for sanding belt cleaning 3.cross sanding unit with lacquer equipment and air blade for sanding belt cleaning Main motors: 18.5 + 11 + 16 kW / 400V / 50 Hz Additional equipment: W61: Structuring burr at the outlet B 10: Structuring brush Abralon, Mink W71: Additional quick-change shaft for brush 1350 B 12: Brass-plated steel wire brush 1350 C 10: LED package A 20: 5 x motorized regulating flaps (2x D=180 + 3 x D=150) Working width 1350 mm Max. passage 205 mm Sanding belt dimensions: 1350x2000 mm and 150x4700 mm 10" touch screen with Industry 4.0 control Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Technical specification WL 6 / 18.5 kW hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - Contact pressure Hpodpfx Abjcbtpks Uea