Used Forging attachments for sale
5
Turning device, forging device, welding turning device, welding device
-for: production of spirals, springs ...
-Holder: Ø 88 x 300 mm
Yigom2mqa
-Speed: 31 rpm
-Drive: 1.5 kW
-Voltage: 400 V
-Dimensions: 1000/550/H1200 mm
-Weight: 120 kg
2
Krups A100
.
Ckxrsfly
14
EFD Minac 70-110 Inductionheater including Cooler (Chiller).
Machine in very good condition, ready to work including two inductors, one ring inductor and one meander inductor for flat material.
To change an inductor it takes only two minutes.
O2hy7hk
Machine is checked by EFD.
6
pressure: t
stroke: mm
total power requirement: 27 kW
ram hammer weight: 70 (Gegenkraft) kg
no. of strokes: 250 Hub/min
stroke length max.: 220 mm
ram length: 400 mm
throat: 350 mm
diameter of flywheel: Ø 640 mm
width of flywheel: 80 mm
Weight approx.: 2,2 t
dimension machine xH: 1,6 x 0,7 x 1,6 m
SPRING HAMMER
with anvil (Ø 450mm x 550mm)
Jxnn9i
Operated by foot treadle.
The hammer is equipped with a forging stamp.
5
head weighing approx. 300 kg
head stroke approx. 400 mm
weight of anvil approx. 4,000 kg - 800 mm underfloor
working height 500 mm
outreach 500 mm
C0djfk70
drive motor refurbished
central lubrication system
electrical data 380 V / 22 KW
space requirements length - 2,400 x width - 1,300 x height -
2,600 mm
total weight approx. 11,000 kg
Discover more used machines
5
Anvil fab. PEDDINGHAUS
Technical data:
Length 630 mm
width 125 mm
height 260 mm
Zdzm7hpc
Square hole 30 x 30 mm
round hole diameter 25 mm
with
- forging tongs
- flat track
- round bar
- barrel filled with sand
used, in good condition
4
Blacksmith vise, bottle vise, anvil vise, anvil, blacksmith anvil, bench vise, locksmith vise, parallel vise
-Jaw width: 165 x 35 mm
-Span width: 150 mm
Bdxpxomvjp
-on: stand
-Dimensions: 780/490/H1030 mm
-Weight: 125 kg
5
length 330 mm
Cajcbxcxts
width 100 mm
loading area
1
Make: Peddinghaus
Type: Caddy 63
Year of manufacture: 1986
Cas9i9vhua
stock no.: 8003 - 4053544686002
For processing of bar material
shear force: 2.000 kN
Stroke rate: max. 48/min.
The number of pieces to be achieved depends on the length of the piece and the equipment of the machine.
Shear diameter: max. 63 mm
Material strength: 450 N/mm2
Drive power: 30 KW - 380 V
Control voltage: 24 V DC
Control system: Siemens S5
weight: approx. 7900 kg
hydraulics: approx. 600 kg
control cabinet: approx....
6
lifting capacity in kg: 35 kg
workpiece length: mm
work piece width: mm
column diameter: 220 mm
lifting height: ca. 500-1200 mm
operating pressure: 0,6 Mpa
cantilever adjustment horizontal: 2600 mm
work height max.: 1000 mm
weight of the machine approx.: 290 kg
dimension machine xH: 2,8x1,1x3,0 m
pneumatic load lifter - manipulator with beam
7nlhmytiz
- control via two hand control on both sides
- jib length arm swiveable 360°, last part of the jib arm length another 300° swivevable with 2 limi...
3
square flat
size 75 x 75 mm
Yxc39ex0x
weight 3.7 kg
2 units
- price per unit -
6
Forging press group LMZ 1000
consisting of:
Feeding device of the company Fröhlich
Workpiece vibrator
I7twcezpw
Induction plant SMS Elotherm year 2015
Eccentric press / trimming press Smeral Exz. LE 160
KUKA Robo
3
Blacksmith vise, bottle vise, anvil vise, anvil, forge anvil, bench vise, locksmith vise, parallel vise
Sssvso
-Jaw width: 135 mm
-Span width: 150 mm
-Number: 10x vices available
-Price: per piece
-Dimensions: 450/160/H900 mm
-Weight: 35 kg
1
Used Osterwalder 4-core horizontal sub-press for hot brass forging operation. Fits FP180 press model. Dimensions 650 x 650 x 400 mm high approx.
Bfxalkkyj0
7
Used billet shears PEDDINGHAUS CADAX 500 with separation, 8m roller table and weighing device (Fa. Mettler).
Shear performance:
450N/mm = 125/115mm;
B9jdjm7ody
550N/mm = 115/105mm;
650N/mm = 105/95mm
The PEDDINGHAUS CADAX 500 is still installed and under power.
Year of manufacture: 1989
Pressing capacity in t: 500
Stroke per minute: 40
Total power consumption in kW: 40
3
1 used air hammer make REITER type. KB 1
The machine is visually and technically in good condition and functions perfectly. Gladly you can visit the machine in our warehouse under power and test to convince yourself.
The sale is as with used machines usual without guarantees according to our AGB's
Payment: Cash on collection or advance bank transfer
A free professional loading on their transport vehicle is a matter of course.
B9qdfswy89
Optional: Insured shipping against payment of expenses.
Eumuco Directional hammer
NH L3 Power 80K Comm. 50??6 (50116) ??
Qaqk9
Schleebusch Manfort MX50523
working (see video)
8
Technical data
Qajpt
Working capacity max. KJ 31,50
Max. Impact frequency min 100
Max. usable number of blows min 43
Max. Bear stroke mm 755
Clearance between guides mm 664
Working height to top edge of insert mm 800
Beard depth mm 595
Insert depth mm 695
Die height without swallow mm 155 / 420
2
Bar shear Caddy 50
Year of manufacture 1992
belt conveyor 6 mtr.
Control Siemens S 5
head cut sorting out
2 boxes
Bsty8csxop
Optional: We can provide various services through our group of companies,
z. e.g. UVV inspections, repairs/overhauls or commissioning of your machines.
3
hammering machine make KROLLMANN type AHM 1
Machine # 54-732 Year of manufacture 1954
Nfg3x
technical data:
Hole diameter 10 mm
tool length 60 mm
motor power approx. 4 kW
with
- 2 rotating tools
used
10
Used billet shear ScPK 800 I for shearing solid material in various grades up to 160mm (transverse) and 170mm (round) as well as various dimensions for flat material. Incl. separation table and feed roller table.
Pressing capacity in t: 800
Stroke per minute: 16 - 20
B8ge73cn9f
Stroke in mm: 125
Total power consumption in kW: 55
Total weight in kg: 52000
7
Hebö ST 4 M
Built in 2004
from the government stock---no industrial use--
Accessories:
Basic machine STM 4
Final forging device EAS 1A
HAND-held embossing device HPG2B
Inlet slide to HPG 2B
Basic machineSTM4
Twist range 30x30mm
Nbpgx
Displacement length 1250mm
Speed 14/28r/min
890kg weight
PLC control
Footswitch
4
Spindle passage: 25 mm
Square fixture on the spindle: 40 x 40 mm
clamping length up to: 900 mm
drive motor: 380 V, 0,25 kW
space requirement: 1200 x 510 x 1070 mm
Juh8a3
weight: 166 kg
5
Technical data
Plunger adjustment Mn 16
Nominal working stroke mm 1,37
Plunger stroke mm 265
Installation height mm 768
Slide adjustment mm 10
Stroke number at continuous operation Stroke/ min 85
Passage in the column mm 1290
Working area of ram mm 1160 x 1035
O03md
Press height mm 6150
press width mm 3234
Press depth mm 3742
Press weight kg93000
Upper ejector
3 ejector pins diameter 36, pneumatically operated
Stroke length mm 40
Force kN 80
Lower ejector
1 hydraulic cylinder 2- ejector pi...
1
Billet shear Peddinghaus Cadax 800 used
year of construction 1979
shear force 8000 k N
electric control
length stop 500 mm
pneum. Clutch/brake combination
Hydro- Pneumatic hold down
Knife installation device
Material chute, with 1 box
Yznuaojbo
3
Hammering and reducing machine make KROLLMANN type HM-0V/2R
Machine # 80-8620 Year of construction 1980
Technical data:
Solid material 6,0 mm
tubes 15 mm
tool length 45 / version V 60 mm
motor power 3,0 kW
with
- 2 rotating tools
Dvhsd3z
used, in good condition
12
Machine is *under power* and can be inspected at any time by prior appointment.
Rated working capacity: approx. 40(50) kJ
Impact frequency at nominal work capacity: approx. 90 1/min
Ultimate bear speed at 40kJ: approx. 4.8 m/s
at 50kJ: approx. 5.3 m/s
Bear Stroke
max.: approx. 710 mm
min.: approx. 500 mm
Bear weight: about 3000 kg
Bear depth: approx. 700 mm
Height of both dies with swallows
max.: approx. 430 mm
minimum: approx. 220 mm
Clear width between the guides: approx. 700mm
Frame foo...
4
Perforated plate
Bjyyddp3my
Manufacturer unknown
Dimensions 1500x1500mm
Working height 940mm -height adjustable--
Feet screwed
thickness of the plate 120mm
hole 45mm
a 4,0mm VA-plate is screwed on
Weight approx. 1,8to
5
Used forging manipulator DANGO & DIENENTHAL DDS 300 in working condition. The manipulator has a nominal load capacity of 300kg with a block length of 4 meters. The load torque is 600mkg. Inclination of the clamps 30.5 °, stroke 500mm. The pliers were modified by the previous owner.
Stroke in mm: 500
Overall size (lxbxh) in mm: 3000 x 1600 x 1920
Total weight in kg: 4650
B080x7on7o
5
Air hammer BECHE L4
bear weight 150 kg
Percussion speed 180/min
Nominal speed of the motor 1450/min
Forges steel up to 100 mm diameter
Throat from the center of the bear to the stand 350 mm
Normal stretching saddles length 190 mm, width 75 mm
Main dimensions length 1800 mm, width 1000 mm, height 2000 mm
weight: hammer ca 2500 kg, scabbard ca 1850 kg
total weight approx. 4350 kg
B9winw8pe2
FULLY FUNCTIONAL
1
Billet shear 214/1000
10.000 kN shear force
year of manufacture 1973
with technical inspection with repair of minor defects
B0ainvmn
transport roller aisle with 2 height adjustable supports
material support table MAT 140-6 for transporting bar material into the roller table aisle
6
Workpiece diameter wires and rods/ pipes: 2-8/ 2-25mm, tool dimensions: 20x25x60mm, hammer shaft rotational speed: 550/min, stroke speedl: 3500/min, control: SIEMENS SIMATIC TP 27, length: 6000mm, width: 4000mm, height: 2600mm, weight: 3t.
Ya8mwymf
12
Hasenclever VEPES 3150 Forging Press
Nominal force, from 10° before bottom reversal point: MN 31.5
Clear distance between columns below the guides: mm 1790
Table clamping surface (WxD): mm 1750x1500
Slide clamping area (WxD) mm 1450x1500
Clear height between table and carriage - from below/above: mm 1200/1579
Height adjustment of the carriage: mm 24
Variable displacement motor rated power: kW 3
Variable speed motor: rpm 20
Carriage stroke: mm 355
Number of strokes per minute: 70
Drive motor rat...
2
Offered from insolvency becomes a punch plate
Manufacturer unknown
Dimensions 1980x960mm
Mum8gk
Working height 860mm
DIcke of plate 135mm
Hole 40mm
Weight about 2.2to
9
Used billet shear ERFURT ScK 1600 for cutting round (max. 235mm) or square (max. 220mm) material. The machine is equipped with a separation table for the input material and a 6000mm long roller table. The material sections can be between 100 and 1000mm long. The billet shear ERFURT ScK 1600 is still installed and can be demonstrated under power.
Pressing capacity in t: 1600
Total consumption in kW: 110
Biucirzx8b
Height above floor in mm: 4200
Stroke per minute: 15
Overall size (lxbxh) in mm: 11...
11
Good working condition
Manufactured in Romania
Brg0g2i9k7
YOM: 1986
Mechanical
Pressing nominal force: 10,0 MN
Number of strokes/min: 20
Ram stroke: 310mm
Work surface: 2290mm x 1600mm
Total dimensions: 7880mm (6880 from the ground) x 4150mm x 2350mm
Total weight: 108009kg
6
Steel bar shear Caddy 50
used
year of manufacture 1980
shear force: 900 kN
Ykkrh9yap
Ø max. 50 mm/450N/mm²
2
Offered from insolvency becomes a punch plate
Manufacturer unknown
Dimensions 1980x960mm
Working height 900mm
DIcke of plate 135mm
Hole 40mm
Weight about 2.2to
Nmxsj
10
Completely overhauled FICEP CADDY 80 for material (round) 80mm and (square) 75mm. The system was completely overhauled in 2018 by FICEP and has not been used since then. A new separation table and roller table were installed. All components have been renewed and checked, the machine is state-of-the-art.
Cutting capacity in kN: 4400
Total consumption in kW: 45
Bxbfa0y0cz
Stroke per minute: 63
Stroke in mm: 70
9
Good working condition
Manufactured in Romania
YOM: 1992
Hydraulic
Ram stroke: 700mm
Nominal working pressure: 320 bar
Working direction: Up to Down
Brgz07z8jv
Work surface: 2000mm x 2400mm
Fast approach speed: 200mm/sec
Working speed: max.50mm/sec
Return speed: 250mm/sec
Maximum height from the ground: 8000mm
Weight: 226,000kg
2
Cadax 500 to.
complete plant
Price on request
Cyr70u
The machine is equipped with:
Length stop with gear motor and measuring system
clutch-brake combination, hydraulic
Hydraulics Rexroth
Knife installation device
Material chute with 3 channels
1 x feeding system consisting of transport roller belt, for 6 m bars
1 x V-feeder for 6 m bars
2
Offered from insolvency becomes a punch plate
Manufacturer unknown
Dimensions 2000x1025mm
Working height 780mm
Thickness of plate 60mm
Hole 50mm
Weight about 1.2to
Be0lyfqrkh
6
New and never used spar rams for HUTA ZYGMUNT hammers
Available for:
D8hg9s9
HUTA ZYGMUNT MPM 3.150 C
HUTA ZYGMUNT MPM 2.000 A
HUTA ZYGMUNT MPM 10.000 B
HUTA ZYGMUNT MPM 16.000 B