Used Perforating for sale (853)

Condition: new, Technical data: Drilling capacity in steel: 50 mm Tapping capacity: M33 face milling cutter: 100 mm end mill: 25 mm spindle: MK 4 throat depth: 340 mm Speeds: (6) 50 - 1510 1/min quill stroke: 200 mm quill feed: 0,1 / 0,2 / 0,3 / 0,4 mm/rev table size: 820 x 240 mm traverse path X: 460 mm traverse path Y: 280 mm column diameter: 180 mm Kdsdpfxopxmlqe Ag Ijl Number of T-slots: 4 T-slot size: 16 x 26 mm motor power: 3 kW Weight, approx.: 750 kg Equipment: - Cross table - thread tightening spindle - Thread cutting device - Automatic spindle feed - LED machine light - Rotatable table - Manual fine feed - Coolant device - Height adjustable protective cover - Limit switch protected spindle

Condition: good (used), Shrink tunnel from a German manufacturer: -Tunnel opening approximately 500 x 200 mm. -Temperature adjustable up to 250 degrees and transport speed up to 25 m / min. -Choice of fixed or co-rotating tunnel bars. -By means of deflectors, the hot air streams at the top and in the middle can be adjusted separately. Kdsdpfx Ageh U A I Rj Iel -Bottom air can be switched on separately. -The machine can be pushed or fixed in place by means of lockable castors.

Condition: refurbished (used), Year of construction: 1975, functionality: fully functional, CANALI Vertical Automatic High-Performance Block Bandsaw Model BBS.V "PACIFIC" K/L-B-P 1800, Type 555, Year 1975 with operator control system in the cabin, Kedpfjxvrniox Ag Iedl Bandsaw wheels Ø 1800 mm, bandsaw wheel width 280 mm, Max. saw blade width 310 mm. Bandsaw blade length 11,500 mm Round timber infeed approx. 20 m long, four strands with inserter Block carriage with ejector onto block transverse conveyor CANALI pneumatic log carriage Type 501.09 with 4 clamping claws, 3 log turners, 4 ejectors Drive power 100 kW, carriage speed 5-120 m/min. driven roller conveyor with side board removal with brush, lifter with stripper for cut-out removal Roller conveyor approx. 12 m with lifting stripper for manual stacking Stacking device with turning unit for bundle packaging Lowerable bundle with transverse bundle conveyor Complete electrical control cabinets Full band saw blade sharpening equipment

Condition: good (used), Year of construction: 2019, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, cutting height (max.): 1,300 mm, cutting width (max.): 1,800 mm, total length: 8,000 mm, total width: 4,000 mm, table height: 700 mm, feed length X-axis: 8,000 mm, feed length Z-axis: 1,300 mm, feed rate X-axis: 70,000 m/min, saw band speed: 100,000 mm/s, table length: 3,000 mm, table width: 1,300 mm, working height: 700 mm, HEMA CoreCutter 900 from our test center - High-performance horizontal band saw - Ultra-precise slicing of blocks into sheets down to a minimum thickness of approx. 1 mm - Vacuum table for precise workpiece clamping - Dynamic servo axes for maximum productivity Kdsdpfswifxdex Ag Iol - 6 years of operation in the test center - Ideally suited for cutting lightweight construction blocks made from aramid, Nomex, Kevlar, balsa, PET, PVC, PMI, PU, and many more - General overhaul at the manufacturer's facility available upon request Gantry - Steel construction - 2x linear guide units per column - Servo motor with ball screw drive per side - Bellows cover for guides and spindles - Signal tower (red/yellow/green) on gantry control Control System - Control cabinet with climate control - Siemens PLC - Frequency-controlled drives - WAGO IO-Link modules - Operator panel with 12-inch screen, integrated into the control cabinet Paintwork - HEMA standard, grey RAL 7031/7047, signal red RAL 3001 Technical Data: - Wheel diameter 2x 900 mm - Table length 3,000 mm - Overall machine length max. 8 m - Cutting width approx. 1,800 mm - Cutting height/vertical stroke approx. 1,300 mm - Cutting height (saw blade – extraction hood) approx. 300 mm - Band drive 400 V, 50 Hz, 22 kW - Continuously variable band speed 500 – 6,000 m/min - Table feed rate max. 70 m/min - Compressed air 6 bar

Condition: excellent (used), Professional milling head with SK40 mount designed for facing and roughing steel and cast iron. Model: AHSC 100-05-11. Working diameter: Ø100 mm. Maximum speed: 22,500 rpm. Number of insert seats: 4. Mount: SK40. Condition: used, fully functional – visible signs of use. Ideal for CNC machining centers and conventional milling machines, ensuring high performance and stability even at high cutting speeds. Kdjdpfoxk T Rnsx Ag Iol

Condition: excellent (used), Year of construction: 2008, Manufacturer: KALTENBACH Type: KBC 350 NA Year of production: 2008 Dimensions (WxHxD): approx. 220x200x150 cm, with chip conveyor, 3 roller conveyors Dimensions: (WxHxD): approx. 220x80x60 cm, 2 of them with storage table. We also offer: 1. Kaltenbach KMR 100 AP 2008 (304096) 2. Kaltenbach KBC 350 NA 2008 (304133) 3. Kasto SSB 260 VA-CNC 2002 (6510 115 305) 4. Kasto SBA 280 AU 1998 (6406 102 056) 5th Kasto HBA 420 AU 1985 6th Kasto HBA 420 AU 1995 (6019 107 306) Kdsdot Ia Syjpfx Ag Ijl 7th Kasto HBA 420 AU 1995 (6019 159 107) 8th Kasto, type SSB 260 VA, year of construction 1994

Condition: used, functionality: fully functional, Amatek Inc. AC Power Source, REV.A, 7000 486 2, 5001iX 400 411 413 Model: 70004862 Type: 5001iX400411413 Condition: Used Technical data: 400-480V AC 50-60Hz 8000VA General information: Output power: 5000 VA AC (output) Output voltage: 0–150 VAC / 0–300 VAC (switchable) Output frequency: 16–1000 Hz (frequency generator function) Phases: 3 Interfaces: LAN, USB, RS-232, GPIB (IEEE-488) Control: Front panel with LCD, rotary knob, keypad Kdedpew D Dtpefx Ag Iel AC/DC power source and high-performance power analyzer

Condition: used, Year of construction: 1999, High-performance Wire-O coil cutter from Renz Adjustable number of loops Adjustable speed Kdedpfxetp Ra Ij Ag Isl incl. various guide rails for the most common Wire-o diameters 5/8 , 7/8 , 3/4 , 3/16 etc. ..... + transport gears 2:1 and 3:1 Price plus VAT. EXW. All information without guarantee. Subject to prior sale. Dealer transaction. The sale takes place under exclusion of any warranty.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 200 h, The system is located in the BIBUS Austria Democenter and can be inspected and tested at any time. The device can process a total of 14 materials - in addition to common plastics such as ABS, PLA, TPU and Carbon PA, high-performance polymers such as Ultem, Peek, CarbonPeek and Helios-Peek are also available. Kdodpfoibikwex Ag Iel Four material-dryer are included in the delivery, Payment terms: Cash in advance, excluding transport and commissioning - these costs are charged depending on the location.

Year of construction: 2026, condition: new, Do you want the BEST price/performance ratio? Contact us! Machines direct from the manufacturer! The ORIGINAL made in AUSTRIA! VACUFORMER - vacuum presses - versatile, functional and economical! Kodpfx Agef H S T Ue Iodl VACUFORMER Standard - The must have machine! Clamshell opening: work piece height approx. 500 mm Pressing surface LxW: 2920x1320mm Overall dimensions LxWxH: 3100x1400x1100mm Standard vacuum pump 40m³/h Equipment: Vacuum table with rubber membrane and membrane fast-change system • Fully welded, sturdy and robust steel construction • pressure up to 9 t/m² (-900 mbar rel.) • analogue vacuum pressure gauge • mechanical vacuum pressure regulator • special, very tough Natural rubber membrane up to 130 °C, 690 % elongation, for wood and veneer pressing • robust, heat resistant phenolic resin ply working surface with integrated air suction channels, thickness 16mm • extra vacuum connector (e.g. for external vacuum bag, vacuum clamping) • incl. swivel castors • with intecrated forklift pockets • complete with cable and plug Electrical connection3~ 400 V, 50/60 Hz, 1.25 kW Other dimensions on request! VACUFORMER L Clamshell opening: work piece height approx. 650 mm Vertical opening: work piece height approx. 1000 mm Pressing surface LxW: 3880x1540mm Overall dimensions LxWxH: 4100x1760x1400mm VACUFORMER XL Clamshell opening: work piece height approx. 650 mm Vertical opening: work piece height approx. 1000 mm Pressing surface LxW: 3880x1780mm Overall dimensions LxWxH: 4100x2000x1400mm VACUFORMER XXL Clamshell opening: work piece height approx. 650 mm Vertical opening: work piece height approx. 1000 mm Pressing surface LxW: 3880x2250mm Overall dimensions LxWxH: 4100x2400x1400mm Vacuum pumps: 40m³/h, 80m³/h, 100m³/h, 140m³/h Standard for VERTICAL models: • Hinged control cabinet on the right side • 4 FESTO pneumatic-cylinders • Trussed pressing frame • Two hand safety operation • Motion signal • Siemens pressing timer with alarm • automatic pressing process UNIVERSALFORMERS Direct - Honest - Experienced

Year of construction: 2025, condition: refurbished (used), REVISED by RSA in 2025 Revised & Cleaned & Repainted Replacement of wear parts Tested in our facilities in production prior to shipment Round: Ø 8 – 90 mm Rectangular: 10×10 – 75×75 mm Square: 10×15 – 70×80 mm Cutting & deburring lengths : 100 – 1.000 mm Kdsdpfx Agovtpd Tj Isl One heavy duty RSA cutting unit model NC2001 with : -Bundle loader, size approx. 600 x 600 mm, usable length approx. 6.200 mm and maximum bundleweight 3.000 Kg -Double feeding rolls -Heavy-duty cutting motor and gear box, with 5,5 kW motor; cutting motor speed 30-250 rpm -CNC movement up/down for precision cutting. (new version, NO hydraulics) -Hydraulic regulation in clamping units -1 Full automatic adjustable length control with CNC stopper One deburring unit RASAPLAN 1000 with : -Automatic length adjustment according to cut length -Synchronised chain transport -Integrated dust exhaust unit Electric : -Program for short lengths -Special program module for calculation of swivelling discharge -Operator panel Siemens OP 17 -Combined cooling through spray mist & jet cooling -Servo axes Revised: 2024 Round: 8 – 90 mm Rectangular: 10×10 – 75×75 mm Square: 10×15 – 70×80 mm Cutting & deburring lengths: 100 – 1.000 mm

Condition: good (used), Year of construction: 2000, High-performance universal metal circular saw Circular saw - automatic Eisele PSU 450 CNC 2 Saw blade diameter 450 mm Cutting diameter 150 mm Kjdpfsvxkc Iox Ag Iedl Miter cutting - all positions +/-45° Saw motor 3.6 kW

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. Kdedpfx Agsvuhumo Iel horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Condition: like new (used), Year of construction: 2021, High-performance industrial imager Manufacturer: DATALOGIC Model: AV500-258W Year of manufacture: 2021 Condition: used (lightly used) Kdedpfx Agewbg Dre Ijl FEATURES • 5 MP image sensor, 32 FPS • Patented dynamic or adjustable focus system for extended depth of field • Continuous, blink-free white illumination • Region-of-interest windowing for higher frame rates • Next-generation decoding algorithm for outstanding decoding performance with 1D, 2D, stacked, and postal symbologies • Gigabyte Ethernet and SyncNet high-speed connectivity • PackTrack feature for closer item spacing • Image storage in various formats from full resolution to highly compressed JPG • Datalogic's patented "Green Spot" technology for visual good confirmation • Dual laser targeting for easy installation • Browser-based e-GENIUS interface compatible with all operating systems and hardware platforms, including PCs and Tablets • Extremely industrial-grade: IP65 for harsh environments with operating temperatures from 0 to 50°C Communication Interfaces: 2 Ethernet TCP/IP, 2 serial ports, Internal communication interfaces System SyncNet technology Connection modes: Master/Slave, Ethernet point-to-point Programming method: e-GENIUS multilingual, browser-based, integrated HTML web server interface The AV500 reader sets a new optical standard for unattended data capture solutions with an industry-leading 5-megapixel CMOS sensor, 32 frames per second image capture, dynamic or adjustable focus, and various lens options. With its wide field of view and excellent depth of field thanks to various dynamic focus options, the AV500 barcode reader is the ideal choice for smart track logistics solutions, baggage handling systems, and smart distribution applications in retail.

Year of construction: 1994, condition: good (used), machine/vehicle number: 491P, Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle adaptor MK 3 - right - left rotation - Drilling spindle stroke 150 mm Kodedkx Anepfx Ag Isdl - drilling spindle speed infinitely variable 80 - 1170 rpm - 2 feeds 0,1 / 0,2 mm/rev - throat 290 mm - max distance table - drilling spindle 780 mm - table with 2 T-slots 480 x 400 mm - Height adjustable via toothed rack with hand crank - Drive 400 V / 0,9 / 1,3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - coolant device - quick-action drill chuck 1-13 - illumination

Condition: excellent (used), Year of construction: 2012, Ref:11095 . 2012 ‘Heidelberg’ Stahl TH82/442K-RFH High performance all buckle folding machine with computerised auto set-up of fold plates & rollers. Comprising; • RFH82 continuous loading round pile feeder with air stream table designed for high run lengths Kedpfx Agsy Hixvo Isdl • With low operator strain, double wheel suction head for wide format sheets. • Digital microprocessor control with touch screen display for automatic setting of fold plates and roller pressures with learning function for signature length, suction & spacing with run monitoring, integrated total and batch counter with memory. • Touch-screen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. • Setting adjustments can be made outside the machine ‘on the fly’. • Sound hoods covering all buckle units. • SAK-66 shingle belt delivery table. Including compressor, tools, spares & manuals. Accessories: Electronic gate-fold plate with control unit. VFZ mobile electronic ‘Z’ knife fold unit. Folding sequence: 1st buckle unit - with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - with 2 plates, perforating/scoring shafts VFZ mobile electronic knife fold. Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Min: 14 x 18 cm.

Condition: used, Year of construction: 2018, total length: 2,400 mm, total height: 1,000 mm, total width: 1,200 mm, Colour: Red Empty weight: 1.000 kg - Year: 2018 - Documentation available: No - CE certificate present: No - Serial number: 600-797 - Main motor power [kW]: 22,2 - Rotation speed [rpm]: 1770 - Rotor width [mm]: 400 - Number of shafts [pcs.]: 2 - Opening width [mm]: 385 - Opening length [mm]: 93 Kdodpfx Asy Tmu Usg Ijl - Sieve perforation [mm]: 20 - Number of fixed knives [pcs.]: 18 - Transport dimensions: 2400mm x 1200mm x 1000mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2002, total length: 4,800 mm, total height: 2,800 mm, total width: 2,400 mm, Colour: Grey Empty weight: 3.550 kg Price: On request - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: MF038/02 - Main motor power [kW]: 22 - Rotation speed [rpm]: 1475 - Rotor width [mm]: 1115 - Number of shafts [pcs.]: 1 - Hydraulic slide present: Yes - Stroke hydraulic slide [mm]: 1500 - Opening width [mm]: 2120 - Opening length [mm]: 1120 - Sieve perforation [mm]: 15 - Number of fixed knives [pcs.]: 36 - Transport dimensions: 4800mm x 2400mm x 2800mm (l x w x h) - Transport weight [kg]: 3550kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Kodpfx Agsyz Uane Iodl Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2017, total length: 2,000 mm, total height: 2,400 mm, total width: 1,350 mm, Colour: Grey - Details: - └ Description: Excluding magnet - Year: 2017 Kedpfx Aox Dik Rsg Isdl - Documentation available: No - CE certificate present: No - Serial number: 600 - Main motor power [kW]: 22 - Rotation speed [rpm]: 1475 - Hydraulic unit power [kW]: 3.0 - Oil tank capacity [L]: 48 - Number of shafts [pcs.]: 1 - Opening width [mm]: 600 - Opening length [mm]: 250 - Sieve perforation [mm]: 15 - Number of fixed knives [pcs.]: 20+ - Transport dimensions: 2000mm x 1350mm x 2400mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1991, total length: 1,660 mm, total height: 1,470 mm, total width: 1,100 mm, Colour: Grey Empty weight: 1.300 kg - Year: 1991 - Documentation available: No Ksdpewu Uy Iofx Ag Ijdl - CE certificate present: No - Serial number: 500-1014 - Main motor power [kW]: 18.5 - Rotor width [mm]: 600 - Opening width [mm]: 600 - Opening length [mm]: 800 - Sieve perforation [mm]: 15 - Number of rotating knives [pcs.]: 1 - Transport dimensions: 1660mm x 1100mm x 1470mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total length: 3,100 mm, total height: 1,550 mm, total width: 1,850 mm, Colour: Grey Empty weight: 5.000 kg - Documentation available: No - CE certificate present: No - Main motor power [kW]: 30 - Rotation speed [rpm]: 1470 - Hydraulic unit power [kW]: 3.4 - Oil tank capacity [L]: 75 Kdodpfx Ajwf U Aqsg Iol - Rotor width [mm]: 1150 - Number of shafts [pcs.]: 1 - Hydraulic slide present: Yes - Stroke hydraulic slide [mm]: 1000 - Opening width [mm]: 2580 - Opening length [mm]: 2180 - Sieve perforation [mm]: 20 - Number of rotating knives [pcs.]: 63 +/- - Transport dimensions: 3100mm x 1850mm x 1550mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, continuous blanching / pasteurizing / cooking vessel or cooling plant shaftless spiral : perforated drum with welded screw (helix configuration) by which the products are gently transported through the water complete insulated closed system : energy saving by the insulation of the entire machine and the indirect steam heating net length ± 11 m width 3.100 mm all stainless steel adjustable speed variable dwell adjustment suitable for steam heated • connection 400 kg / h (5 bar) heat exchanger circulation pump with outfeed conveyor belt for unloading with elevating spiral screw for loading in good condition Applications : • Blanching of vegetables and potato products • Pasteurising and/or after-pasteurising of vacuum-packed products • Cooking of sausages in natural or artificial casings • Cooking of heads and tongues Kjdpfx Asy Nx H Iog Isdl • Cooking of poultry • Continuous soup production

Condition: excellent (used), Year of construction: 2021, Huber CenterMax band screen for (waste) water inlet Chamber opening: 600mm Kedpjy Tmbbofx Ag Iodl Screening width: 600mm Discharge height to bottom: 6722mm Machine height above bottom: 8642mm Perforated plate: 2mm

Condition: used, maximum load weight: 13,460 kg, overall weight: 16,000 kg, first registration: 01/2012, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,625 mm, loading space volume: 47 m³, total width: 2,550 mm, total height: 2,900 mm, Year of construction: 2012, Vehicle no. G0123213_SAMPLE - Manufacturer: Krone. * Sliding roof tarpaulin * Reflective contour marking on side/rear * Load certificate Code-XL * Portal doors with double locking bars (inside) Kdodpfx Ajy N Ny Sog Iol * Sliding side curtain * Suitable for forklift driving inside * Telescopic support legs * Equipment for rail loading * Lashing options LASI CODE XL!!! Multiple units available! Delivery time upon request! Multi Lock external frame. New tarpaulin. Steel insert slats with integrated combination lashing rail (slotted/perforated). Technically ready for operation with no further repairs required. Partial repainting. Undercarriage with signs of use. UVV valid. Dimensions are approximate. Offer is subject to prior sale, prices quoted are net ex location D-59302 Oelde. Further details on request by phone or email:

Condition: used, maximum load weight: 13,900 kg, overall weight: 16,000 kg, first registration: 01/2001, loading space length: 7,700 mm, loading space width: 2,480 mm, loading space height: 2,950 mm, total width: 2,550 mm, total height: 3,150 mm, Year of construction: 2001, Vehicle no. G0123449_1 - Manufacturer: Krone. * Simple corner castings * Forklift accessible * Lashing options * Perforated pallet stop bar Delivery time: IMMEDIATE. Technically operational condition, no further repairs required. Undercarriage shows signs of use and some surface rust. Occasional paint peeling on swap body components. Localized rust spots on swap body components. Deformations/bumps on parts – see pictures. Several units available! Dimensions are approximate. Offer is subject to prior sale and non-binding. Prices are net, ex location D-59302 Oelde. For further details, please contact us by phone or email: Kdsdpfx Agoy N Nx Io Isl