Used Perforating for sale (864)

Condition: new, table length 2990 mm table width 1490 mm table height 850 - 900 mm weight of the machine ca. 0,8 t Welding table / perforated table: with milled and deburred holes Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels 165 mm Dedpfx Aaexpxrhe Necd Height adjustable from approx. 880 - 980 mm Ribbed underside for reinforcement. Including floor bearings Accessories optional! Surface flatness 0.2 - 0.5 mm over 1000 mm.

Condition: new, table length 2400 mm table width 1200 mm table height 850 - 900 mm weight of the machine ca. 0,65 t Welding table / perforated table: Dcodpfx Asxpxrbsa Njd with milled and deburred holes Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels 165 mm Height adjustable from approx. 880 - 980 mm Ribbed underside for reinforcement. Including floor bearings Accessories optional! Surface flatness 0.2 - 0.4 mm over 1000 mm. The table can be moved with a pallet truck. Pallet truck is not included.

Condition: new, table length 2000 mm table width 1000 mm table height 850 - 900 mm weight of the machine ca. 0,45 t Welding table / perforated table: Hole diameter: 28mm Dsdpfegp Dymex Aa Necd The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. Very sturdy base, so the Table can be moved with a pallet truck. The accessories shown are optional! Pallet truck is not included in the scope of delivery

Condition: new, table length 2990 mm table width 1490 mm table height 850 - 900 mm weight of the machine ca. 0,8 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Dcsdsgxi Ebjpfx Aa Nod Pallet truck is not included in the scope of delivery

Condition: new, table length 2400 mm table width 1200 mm table height 850 - 900 mm weight of the machine ca. 0,65 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Dcjdpegp Dyqefx Aa Nod Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: new, table length 1200 mm table width 1200 mm table height 840 - 890 mm weight of the machine ca. 0,32 t Welding table / perforated table: Hole diameter: 28mm Dcedpfx Aajpk Iv Ue Ned The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: new, table length 1000 mm table width 1490 mm table height 840 - 890 mm weight of the machine ca. 0,4 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Dsdpfeh Dqb Isx Aa Njcd Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: new, table length 1200 mm table width 800 mm table height 840 - 890 mm weight of the machine ca. 0,3 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Dodeih D Apspfx Aa Nscd Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: used, Condition: NEW with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. - Heavy-duty, basic structure of the machine frame for a flat work surface Dcjdpfx Aewv Tqbea Nsd - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey

Condition: used, Year of construction: 2009, color: white, overall weight: 16,000 kg, maximum load weight: 15,999 kg, empty load weight: 1 kg, loading space volume: 45 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,520 mm, first registration: 06/2009, axle configuration: 2 axles, total length: 7,300 mm, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 40922 Wecon, BDF swap body * Year of manufacture: 2009 * 7.45 m * New tarpaulin * Neutral tarpaulin * Edscha / sliding roof system * Load securing certificate DIN EN 12642 Code XL * Lashing hole perforation in outer frame (Multilock outer frame) * Retractable lashing rings * Portal doors * Telescopic landing legs * Galvanized * Suitable for rail and crane handling * Other * Gross weight: 16,000 kg * Unladen weight: 1 kg * Payload: 15,999 kg * Permissible total weight: 16,000 kg * Internal dimensions: L = 7,300 mm, W = 2,480 mm, H = 2,520 mm * Internal volume*: 46 m³ * Corner fitting measurements E = 5,853 mm * Overhang measurement = 799 mm * Parking height: 1,320 mm * Pallet spaces: 18 * Wecon type WPR 745 * Standard swap body 7.45 m Disclaimer: Subject to prior sale, change, and errors. More photos and videos available on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Processing of all (export) documentation * Registration and export/customs plates * Vehicle preparation: new tarpaulins, signwriting, painting, etc. * Professional loading and load securing Dodpfjynrw Nex Aa Nscd * TÜV inspections, registration service * Delivery of commercial vehicles Our expert staff will be glad to advise you.

Condition: excellent (used), PR9000 pallet racking for 42 Euro pallets This pallet racking is tested with a maximum load of 2,200 kg per beam level in accordance with DIN EN 15512 and therefore has a maximum bay load of 9,000 kg and can be loaded with 550 kg per pallet. The push-through protection prevents stored goods from slipping through when shelves are positioned parallel to each other Made of solid, high-quality steel for extreme robustness. Withstands high loads of up to 9,000 kg per bay without any problems High-quality workmanship of the entire pallet rack Plenty of storage space thanks to the 2 levels and 4 bays Eye-catching blue and orange color scheme for maximum safety Dodpfxov Hp Eqo Aa Necd Upright profile: Height: 5500 mm Material: S-355 JR steel Dimensions: 80 W x 70 D x 1.5 Perforation: 50 mm (grid - offset) Surface: Powder-coated blue Profile structure: Omega profile shape Depth: 1100 mm Manufacture: Cold-rolled profile Bay load: 9000 kg Crossbars: The height of the cross beams can be individually adjusted in 50 mm increments Total load capacity per truss level 1800 mm traverse: 2000 kg 2700 mm truss: 3000 kg 3600 mm truss: 2200 kg Material Steel S-235 JR (cold-rolled steel) Profile construction: Rectangular profile Fastening: Hook lugs on each side of the crossbeam for hooking in, secured with locking pin Finish: Powder-coated orange Manufacture: Beveled sheet steel Scope of delivery 05 x PR9000 upright 5.5 m high / 110 cm deep Bay load: 9,000 kg 12 x PR9000 spreader beam 3600 cm wide incl. safety pins, shelf load: 2200 kg 04 x cross beam PR9000 1800 cm wide incl. safety pins, shelf load: 2000 kg 06 x Push-through protection PR9000 3600 mm 02 x Push-through protection PR9000 1800 mm Year 2020-2022 You can find more items - new and used - in our store! International shipping costs on request!

Condition: used, mileage: 25,229 km, power: 324 kW (440.52 HP), fuel type: diesel, gearing type: automatic, axle configuration: 3 axles, overall weight: 26,000 kg, first registration: 10/2024, color: white, total width: 2,550 mm, total height: 3,400 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN 26.440 TGX 6x2-4 LL | Construction Machinery & Work Platform Transporter ----Vehicle Data * MAN TGX 26.440, 6x2-4 LL * 324 kW (441 hp) * Euro 6e (green emissions sticker) * Diesel, automatic transmission * Permissible total weight: 26,000 kg * Mileage: 25,229 km * Color: White * Internal combustion engine ----Truck Equipment * Long-distance driver’s cab * Auxiliary heater * Safety package * Driver comfort package * Storage package * Trailer package * Steerable trailing axle * LED tail lights * Sun visor * Beacon lights * Reversing camera * Multifunction steering wheel * 1 sleeper bunk * Refrigerator * Multimedia system with navigation * Automatic climate control Dcedpfx Aeyn Tv Toa Nsd ----Superstructure * Low-profile design made from laser-cut and bent special profiles * Body length approx. 8,850 mm * Frame height unladen approx. 1,050 mm * Frame width approx. 2,550 mm * 2 loading ramps (each with 1 fixed part + 1 extension) * Ramps laterally adjustable * Ramp surface with grating * Mechanical ramp locking * Ramp holder on outer frame when not in use * Electro-hydraulic ramp drive * Emergency control at the control block * Hand pump in case of total failure * Hydraulic rear supports * Radio remote control for all hydraulic functions * Grating floor with increased load capacity * Beveled rear section * Front wall approx. 2,000 mm high, bent inwards * Stainless steel storage box inside, in front of front wall * 2 stainless steel side storage boxes (left/right on frame) * 1 stainless steel storage box rear right (for hydraulic unit/control block) * Work lights: * 1 pair on cab rear wall * 2 pairs on chassis sides * 2 pairs at the rear * 2 steps for cargo area access ----Load Securing * Longitudinal members with Multi-X contour and 2.5 t lashing points * 6 pairs of 6 t lashing points in the longitudinal members * Perforated outer frame with 2.5 t lashing points * 6 pairs of 6 t lashing points in the outer frame * 4 pcs 6 t lashing points at the rear * 4 pcs 6 t lashing points below, in front of front wall storage box ----Paintwork * Body KTL powder-coated in RAL 9005 black * Front wall painted in RAL 9005 black * Ramps and gratings hot-dip galvanized ----Labelling * Reflective tape on sides and rear according to EU regulations For further information, we are happy to assist you.

Condition: used, mileage: 25,229 km, power: 324 kW (440.52 HP), first registration: 10/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,400 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN 26.440 TGX 6x2-4 LL – Construction Machinery & Access Platform Transporter ---Vehicle Data--- * MAN TGX 26.440, 6x2-4 LL * 324 kW (441 HP) * Euro 6e (green emissions sticker) * Diesel, automatic transmission * Permissible gross weight: 26,000 kg * Mileage: 25,229 km * Color: White * Internal combustion engine ---Truck Equipment--- * Long-distance driver’s cab * Auxiliary heater * Safety package * Driver comfort package Dcedpsyn Tvtefx Aa Njd * Storage package * Trailer package * Steered trailing axle * LED rear lights * Sun visor * Rotating beacons * Reversing camera * Multifunction steering wheel * 1 sleeping berth * Refrigerator * Media system with navigation * Automatic climate control ---Superstructure--- * Low-profile design made from laser-cut and bent special profiles * Body length: approx. 8,850 mm * Frame height unladen: approx. 1,050 mm * Frame width: approx. 2,550 mm * 2 loading ramps (each with 1 fixed & 1 extendable section) * Ramps laterally adjustable * Ramp surfacing made from grating * Mechanical ramp locking * Holder on the outer frame for unused ramps * Electro-hydraulic ramp drive * Emergency control on valve block * Manual pump for complete system failure * Hydraulic rear supports * Radio remote control for all hydraulic functions * Grated floor with increased load capacity * Beveled rear end * Bulkhead approx. 2,000 mm high, folded inwards * Stainless steel toolbox inside, in front of the bulkhead * 2 stainless steel toolboxes on the frame (left/right) * 1 stainless steel toolbox at the right rear (hydraulic unit/valve block) * Work lights: * 1 pair on cab rear wall * 2 pairs on frame sides * 2 pairs at rear * 2 steps for cargo area access ---Load Securing--- * Longitudinal beams with MULTI-X contour and lashing points 2.5 t * 6 pairs of 6 t lashing points in the longitudinal beams * Perforated outer frame with 2.5 t lashing points * 6 pairs of 6 t lashing points in the outer frame * 4 pcs. 6 t lashing points at rear * 4 pcs. 6 t lashing points in front of the bulkhead toolbox ---Paintwork--- * Superstructure KTL powder-coated RAL 9005 black * Bulkhead painted in RAL 9005 black * Ramps and floor grates hot-dip galvanized ---Labelling--- * Reflective tape on sides and rear in compliance with EC regulations For further information, please feel free to contact us.

Condition: used, mileage: 25,229 km, power: 324 kW (440.52 HP), first registration: 10/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,400 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN 26.440 TGX 6x2-4 LL | Construction Machinery & Aerial Platform Transporter ----Vehicle Data * MAN TGX 26.440, 6x2-4 LL * 324 kW (441 hp) * Euro 6e (green emissions sticker) * Diesel, automatic transmission * Gross vehicle weight: 26,000 kg * Mileage: 25,229 km * Color: white * Internal combustion engine ----Truck Equipment * Long-distance driver’s cab * Auxiliary heater * Safety package * Driver comfort package * Storage package * Trailer package * Steerable trailing axle * LED rear lights * Sun visor * Rotating beacons * Reversing camera * Multifunction steering wheel * 1 bunk bed * Refrigerator * Media system with navigation * Automatic climate control ----Bodywork * Low-profile construction made from laser-cut and precision-bent special profiles * Approx. 8,850 mm superstructure length * Approx. 1,050 mm frame height unladen * Approx. 2,550 mm frame width * 2 extension ramps (each with 1 fixed and 1 extendable section) * Side-shiftable ramps * Ramps with grating surface * Mechanical ramp locking * Ramp holder on the outer frame when not in use * Electro-hydraulic ramp drive * Emergency control on the control block * Hand pump in case of complete failure * Hydraulic rear stabilizers * Radio remote control for all hydraulic functions * Grating floor with increased load capacity * Beveled rear section * Front wall approx. 2,000 mm high, bent inward * Stainless steel storage box inside in front of the front wall * 2 stainless steel side storage boxes on frame (left/right) * 1 stainless steel rear right storage box (hydraulic unit/control block) * Work lights: * 1 pair on rear cab wall * 2 pairs on sides of the frame * 2 pairs at the rear * 2 steps for access to cargo area ----Load Securing * Longitudinal beams with Multi-X contour and lashing points 2.5 t * 6 pairs of 6-ton lashing points in the longitudinal beams * Perforated outer frame with 2.5-ton lashing points * 6 pairs of 6-ton lashing points in the outer frame * 4 x 6-ton lashing points at the rear * 4 x 6-ton lashing points in front of the front wall storage box ----Paintwork * Body KTL powder-coated in RAL 9005 black * Front wall painted in RAL 9005 black * Ramps and grating surfaces hot-dip galvanized Dedpfx Aajyn Tu Ns Nscd ----Markings * Reflective tape on sides and rear according to EU regulations For more information, we are happy to help.

Condition: used, maximum load weight: 29,450 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2015, next inspection (TÜV): 04/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2015, Equipment: ABS, SDP 27, LASI EN 12642 Code XL, 223,613 km Djdoym H I Hspfx Aa Necd Body interior / exterior: * Sliding curtain on left and right * Quick-release fastener at front * Sliding roof * Load securing certificate EN 12642 Code XL * Internal height approx. 2,730 mm * Perforated outer frame (Multilock) * Pallet stops on left and right * Screen-printed floor for 7,100 kg forklift axle load * 23 aluminum insert slats * 3 pairs of sliding rings, adjustable * Rear portal doors with double locks * Access ladder * Storage box * Reversing lights * Rear fog lamp Chassis / other equipment: BPW Eco Plus axles * Air suspension * Raise and lower function * ABS, EBS * 385/65 R 22.5 tires * Remaining tread approx. 5 - 15 mm ---- Non-binding offer from Bocholt location. Subject to prior sale and errors. Sale only to traders or for export.

Condition: used, maximum load weight: 29,510 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2016, next inspection (TÜV): 10/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, SDP 27, LASI EN 12642 Code XL, 349,026 km Body interior / exterior: * Sliding curtain left and right * Quick-release fastener at front * Sliding roof * Load securing certificate EN 12642 Code XL * Internal height approx. 2,730 mm * Perforated external frame (Multilock) * Pallet stop left and right * Anti-slip phenolic plywood floor suitable for forklift axle load up to 7,100 kg * 36 aluminum insert slats * 3 pairs of sliding rings, adjustable * Rear portal doors with double locks * Access ladder * Toolbox * Reversing lights * Rear fog light Chassis / additional equipment: BPW Eco Plus axles Dcsdpfx Aasym H I Te Njd * Air suspension * Height adjustment (raise and lower) * ABS, EBS * Tires 385/65 R 22.5 * Remaining tread approx. 7 - 14 mm ---- Non-binding offer from location Bocholt, subject to prior sale and errors. Sale only to commercial customers or for export.

Condition: used, operating hours: 1,250 h, overall weight: 1,500 kg, rotor diameter: 252 mm, total length: 1,800 mm, total height: 2,000 mm, total width: 1,200 mm, rotor width: 600 mm, power: 18.5 kW (25.15 HP), rotational speed (max.): 90 rpm, filling opening width: 600 mm, filling opening length: 800 mm, No. 3255 Dcedpfjx Hhk Rjx Aa Nod Single-shaft shredder WEIMA WL 4 Used, approx. 1250 operating hours Quiet-running and slow-running V-rotor system Motor power main drive 18.5 kW Rotor diameter 252 mm Rotor width approx. 600 mm Rotor speed approx. 90 rpm Hopper volume 0.6 m3 Inlet cross-section 800 x 600 mm LW Reversible blades, concave ground Automatic operation / manual operation Sieve perforation 15 mm Suction nozzle 160 mm Transport dimensions approx. 1800 x 1200 x 2000 mm LWH Weight approx. 1500 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Automated Fishing Bait Boilie Line with Stainless Steel Eurobin Lifter for adding Dough into the Extruder, Steel Safety Caging and Safety Interlock Platform, (2) x Eurobins allow filling in Batches, Kilia Extruder capable of large outputs, features additional Guarding on the top of the Extruder to ensure safety with use of the Eurobin Lifter. Extruder Serviced Bait Tools Rolling Machine, which forms Dough Balls in sizes between 12 and 24mm (additional options of sizes available from Manufacturer) built in Cut-off for Waste Dough to be re-used and reduce need for Manual Monitoring, Dual Direction PVC Infeed Belt ensure less marking of product in Soft Dough Stage products then move to the Boiler Unit. This has Variable Speed Belt and PLC Connection to Gas System for Timing and Temperature Regulation. All automated and capable of maintaining High Infeed Dough Quantity, Post Cook Outfeed Perforated Belt with 6 Fans Array for increased drying of product, Belt can be varied in speed to suit requirement, Belt terminates into Cassette Tray Filler. Fills to required weights of 9kg (this is variable) further Array of Fans below Tray Drying Line to further dry the products. Machine capable at highest rate 600kg per hour of Finished Products, Waste Quantity when set up correctly yields less than 0.5%. Dcedpoyil Eaofx Aa Nsd Location: These lots are located in Burnham-on-Crouch, Essex, UK.

Condition: used, maximum load weight: 1,792 kg, overall weight: 2,500 kg, axle configuration: 2 axles, first registration: 01/2026, loading space length: 4,000 mm, loading space width: 2,010 mm, total width: 2,100 mm, total height: 1,000 mm, A27 GW26NGA00001 Car Transport Trailer STEMA FHAK 25-40-21.2 Vehicle transport trailer, 2-axle trailer, type AT2035, gross vehicle weight: 2.5 t, flatbed, equipped with 10'' tires, loading area: wooden floor, additional ramps for lowered vehicles, overrun braked, 100 km/h approval, with WAP901 cable winch and manual hydraulics. Djdoyn Ugmjpfx Aa Nocd Main frame: Extremely robust and torsion-resistant, with crash-tested safety V-drawbar. Tiltable, sturdy frame construction with safety locks. All frame components are hot-dip galvanized by immersion bath, providing corrosion resistance. Running rails: Extra-wide, perforated, non-slip running rails made of galvanized steel sheet with large elongated holes for securely fastening lashing straps. The extra-wide rail allows for easy transport of vehicles with various wheelbases. Attached loading ramps ensure easy loading and unloading. Side panels: Signal red powder coating (corrosion-free and resistant to scratches) for increased safety. Vehicle not reconditioned ...and many more features. Subject to errors and prior sale.

Condition: used, maximum load weight: 2,739 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 01/2023, loading space length: 4,070 mm, loading space width: 2,030 mm, total width: 2,160 mm, total height: 745 mm, A24. GW26G000233, * 100 km/h version with shock absorbers installed * Cleverly stowed, lightweight ALU loading ramps under the loading deck for convenient loading and unloading. * Simply pull them out of the guide shaft and securely hook them in place. * The side perforated railing with multiple additional lashing points ensures your load is held securely. Vehicle transport trailer by STEMA, type Carrier XL - SHA .2, reg. no.: L-AH 138, GVWR: 3,500 kg, with heavy-duty support legs, loading ramps behind the license plate, braked with overrun brake, 100 km/h Dcedpfxsyn Ud Eo Aa Nod Vehicle not prepared, errors and intermediate sale reserved.

Condition: used, maximum load weight: 1,950 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,000 mm, loading space width: 2,010 mm, total width: 2,540 mm, total height: 1,000 mm, A25 GW26NG000031 Car transport trailer, manufacturer STEMA, type FTAK 27-40-21.2, Gross weight: 2,700 kg, with overrun brake, WAP901 hand winch, low loader, hydraulically tiltable. Main frame: Extremely sturdy and torsion-resistant with crash-tested safety V-drawbar. Tiltable, robust frame construction with safety locks. All frame parts are hot-dip galvanized for corrosion resistance. Running rails: Extra wide, perforated, non-slip running rails made of galvanized sheet with large elongated holes for secure fixing of tie-down straps. The extra-wide track allows easy transport of vehicles with different wheelbases. Integrated drive-on ramps facilitate easy loading and unloading. Dcodpfx Aajyn Ucbj Ned Side panels: Signal red powder-coated (corrosion-free and scratch-resistant) for enhanced safety. Vehicle not reconditioned ...and much more. Errors and prior sale reserved.

Condition: used, maximum load weight: 1,950 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,000 mm, loading space width: 2,010 mm, total width: 2,540 mm, total height: 1,000 mm, A26 GW26NGA00003 Passenger Car Transport Trailer, Manufacturer: STEMA, Model: FTAK 27-40-21.2 Gross Weight: 2,700 kg, inertia-braked, WAP901 hand winch, low-loader, hydraulically tiltable. Dedpfx Aaeyn Ubqj Nscd Base frame: Extremely robust and torsion-resistant with crash-tested safety V-drawbar. Tiltable, sturdy frame design with safety locks. All frame components are hot-dip galvanized for corrosion resistance. Running rails: Extra-wide, perforated, non-slip zinc-plated running rails with large elongated holes for securely fastening tie-down straps. The extra-wide rail makes it easy to transport vehicles with different wheelbases. Integrated ramps allow for easy loading and unloading. Side walls: Signal red powder coating (corrosion-proof and scratch-resistant) for enhanced safety. Vehicle not refurbished ...and much more. Errors and prior sale excepted.

Condition: new, empty load weight: 3,026 kg, maximum load weight: 11,374 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, suspension: steel, tire size: 205/65 R 17,5, color: other, gearing type: other, front tire size: 205/65 R 17,5, rear tire size: 205/65 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 820 mm, vehicle inside width approx. 2,480 mm, front wall galvanized steel, 600 mm aluminium drop sides foldable and removable, stanchions removable, 40 mm wooden floor, 3 stanchion pockets for 80 x 80 stanchions in the middle, 6 x lashing brackets, outer frame with lashing eyes, reinforced gear support winch with load and fast gear, contour marking and side collision protection, mudguards and spray mist suppression, rear, , surcharge for front wall grille 1.600 mm high (perforated plate), price: 1,400 Euro, , Surcharge for aluminum ramps load capacity per pair 8 t and 2 x folding supports rear, price: 1,800 Euro, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Dcjdpsynt Atefx Aa Nsd

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 235/75 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 860 mm, vehicle interior width approx. 2,480 mm, front wall galvanized steel, 600 mm aluminium drop sides foldable and removable, stanchions removable, 40 mm wooden floor, 3 stanchion pockets for 80 x 80 stanchions in the middle, 6 x lashing brackets, outer frame with lashing eyes, reinforced gear support winch with load and fast gear, contour marking and side collision protection, mudguards and spray mist suppression, rear, , Surcharge for front wall grille 1.600 mm high (perforated plate), price: 1,400 Euro, , Surcharge for aluminum ramps load capacity per pair 8 t and 2 x folding supports rear, price: 1,800 Euro, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Dedpfx Aasynt Dke Nscd

Condition: new, empty load weight: 3,080 kg, maximum load weight: 11,320 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 205/65 R 17,5, color: other, gearing type: other, front tire size: 205/65 R 17,5, rear tire size: 205/65 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 820 mm, vehicle interior width approx. 2,480 mm, front wall galvanized steel, 600 mm aluminium drop sides foldable and removable, 3 stake pockets in the middle for 80 x 80 stakes, removable stakes, 6 x lashing brackets, outer frame with lashing eyes, reinforced gear support winch with load and fast gear, contour marking and side collision protection, mudguards and spray mist suppression, rear, , Surcharge for front wall grille 1.600 mm high (perforated plate), price: 1,400 Euro, , Surcharge for aluminum ramps load capacity per pair 9 t and 2 x folding supports rear, price: 1,800 Euro, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Dedpfx Ajynt Agsa Necd