Used Pet Blowing Machine for sale (65,182)

Condition: used, Stretch blow molding machine by Etek ISBM line = Injection stretch blow molding Stretch blow molding machine for single-use PET bottles made from PET preforms Fjdpjkucxljfx Aanopp Stretch blow molding machine for production using the rotary process Manufacturer: ETEK / GF-Industries, Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Mains connection: 400 volts, 50 Hz Weight: approximately 6000 kg In like-new condition

Condition: used, Year of construction: 2006, Semi-automatic PET bottle machine – ZENTRONIK ZR-7 1. Heating oven for PET preform heating 2. Semi-automatic PET bottle production machine Mould: double-cavity for 5.0L bottles (48 mm cap) Fpedownzdaepfx Aanep Output: approx. 800 bottles/hour Technical condition: used, operational

Condition: excellent (used), Year of construction: 2003, PET bottle blowing machine Manufacturer: KRONES Model: CONTIFORM K781 Efficiency: 12,000 bph Includes 1.5 L and 0.5 L bottle molds Power: 150 kW Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Set dimensions (blow mold + preform feeder): 1100 x 340 cm, h: 450 cm Blow mold dimensions: 500 x 340 cm, h: 250 cm Feeder dimensions: 600 x 250 cm, h: 450 cm Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Fpjdpfx Ajvddkvsansp Year of production: 2003 Technical documentation of machine operation Very good condition

Condition: used, Year of construction: 1992, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 4 S1 Year of prod. 1992 Capacity: 4,000 for 1.5 L / 2 L bottles Fpodpowa Rhrjfx Aanop Installed power: 150 kW Includes 1.5 L molds Preform feeder Technical condition: used machine, starts up, program is functional

Condition: used, Year of construction: 1999, - PET-Blow moulding machine, make Sidel, type: SBO 16 with preform tipper, preform feed, unscrambler, preform transport, built 1999, already dismantled, ex location for sale. - PET-Blow moulding machine, make Sidel, type: SBO 20, with preform tipper, preform feed, unscrambler, preform transport, built 1999, already dismantled, ex location for sale. Fsdpfxorazwrs Aanspp

Condition: used, Year of construction: 1998, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 16/16 S1 Year of manufacture 1998 Capacity: 16,000 for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Includes 1.5 L moulds Fpsdjutni Rspfx Aanep Preform feeder Chiller cooling unit Technical condition: used machine, functional until dismantled. The machine is currently dismantled, assembled in elements and prepared for transport. Full and original technical documentation.

Condition: used, Year of construction: 2010, machine/vehicle number: SO146, Used SIDEL PET Blow molding machine - Year 2010Technical Specifications & Performance DataThis Sidel PET blow molding machine, model SBO10, is designed for the rotary stretch-blow molding of PET bottles from preforms. Manufactured in 2010, the machine is configured with 10 cavities and has a stated production capacity of 14,000 bph. The Ø28 1881 neck finish is specified for the installed mold and preform configuration.Manufacturer: SidelModel: SBO10Year: 2010Production capacity: 14,000 bphNumber of cavities: 10Preform neck finish: Ø28 1881Blower footprint: 8,900 mm length x 3,200 mm widthInstalled power: 306 kWMain electrical supply: 3 x 400 V, 50/60 HzMaximum current: 452 AAdvanced Automation & Control SystemsThe machine operates from a 3 x 400 V electrical supply and is specified for 50/60 Hz operation. A 24 V remote-control circuit is indicated. Its electrical installation includes a short-circuit rating of 25 kA RMS symmetrical, supporting integration into an appropriately designed industrial electrical system.The rotary PET blow molding process is suited to automated preform handling, bottle formation and discharge to downstream bottling equipment. The supplied preform handling equipment includes an elevator column, mini-hopper assembly and main hopper/feeder.Production Line Integration CapabilitiesThis PET bottle blower can serve as the bottle-forming stage of a used bottling line for beverage production and industrial packaging. It can be integrated with preform supply equipment upstream and with air conveyors, filling monoblocks, labeling machines, shrink wrappers and palletizing systems downstream.The supplied equipment list includes a Sidel EBH 2050 PET preform press manufactured in 2010 and a Sidel-Alsim air conveyor manufactured in 1999. The air conveyor supports transfer of newly formed PET bottles toward subsequent packaging machinery.Preform elevator column: 5,200 mm length x 1,300 mm width x 1,200 mm height; 250 kgMini-hopper assembly: 2,900 mm length x 1,630 mm width x 1,160 mm height; 367 kgMain hopper/feeder: 2,590 mm length x 1,850 mm widthMachine Condition & Maintenance HistoryThe machine is presented as a second hand Sidel PET blow molding machine with identified year, model, output and electrical data. Buyers can use the stated configuration and associated handling equipment details when planning inspection, recommissioning and integration into a PET bottling or industrial packaging production line.Operational Performance & VersatilityThe SBO10 is designed to convert PET preforms into finished PET bottles through a rotary stretch-blow molding process. Its 10-cavity arrangement supports continuous bottle production at the stated output. The specified Ø28 1881 neck finish identifies the available preform and bottle-neck configuration.As part of beverage production equipment, a PET blow molding machine typically supplies e... Fpjdpfx Aasz E Dfienop

Condition: good (used), Year of construction: 2017, functionality: fully functional, LINEAR PET BLOWING MACHINE SET with auxiliary equipment AC ARCOR - multiBlow2 - 2017 Speed: 1,5L - 6000 Cavities: 4 Formats: 0,1 - 3,0L AUXILARY EQUIP 1. Chiller - M.T.A S.p.A - TAE EVO 051 2. LOW Pressure compressor - SHAMAL 45kw Unit price: 2000 eur / There are 3 units in total. 3. Dehumidifier Unit price: 300 eur / There are 3 units in total. Fodpfx Aasquuvrenjpp 4. Receiver tank - Low pressure - MAX 16Bar 5. Receiver tank - High pressure - MAX 45Ba

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr Fpodpfx Aaeg Ailconsp CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Equipment: documentation/manual, For sale: Complete PET bottle blowing line TES BluLine4 HiTech MultiFlex (2017) We offer for sale a complete PET bottle production line from the renowned manufacturer TES Sp. z o.o., model BluLine4 HiTech MultiFlex, manufactured in 2017. Fpjdpfszd Sb Sox Aanjp The machine is in very good technical condition, regularly used, and ready for further operation. Technical data Manufacturer: TES Sp. z o.o. Model: BluLine4 HiTech MultiFlex Year of manufacture: 2017 Bottle capacity range: 0.5 l – 4 l Number of cavities: 2-4 The line includes: ✅ Preform feeder ✅ PET bottle blowing machine ✅ Bottle packer for trays Advantages of the equipment Complete and ready-to-use production line Universal range of produced capacities Solid construction and proven TES technology Very good technical condition Ideal for manufacturers of beverages, water, household chemicals, and other products packaged in PET bottles Price: negotiable. If you have any questions or would like to obtain additional information, please contact us by phone or private message. We will gladly provide detailed information and send additional photos of the equipment.

Condition: used, Set of machines for the production of beverages in 5-liter PET bottles. 1) RIVI 24 carousel filling machine - machine modernized in 2013 Fjdsu I N Npepfx Aanjpp - previously used for 1.5 L bottles (24 fillers) - number of filling heads: 12 pcs (for 5 L bottles) - capacity: approx. 1800 bph 5 L 2) ZALKIN 4 PET bottle capper - number of closing heads: 4 pcs - capacity: approx. 2000 bph Used machines, functional at the time of dismantling. Complete original technical documentation. Other offers also include semi-automatic blow molding machines for 5 L PET bottles, compressors and bottle labelers. .

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 271/1, overall weight: 700 kg, Semi-automatic PET bottle blowing machine for producing 5-gallon PET bottles. Includes heating and blowing unit. Fedpfx Aaozd Tduenspp Supplied with 2 sets of 5-gallon blowing molds. Capacity: 60 bottles/hour.

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Fedpfx Aasydvzdenopp Table Size: 457 x 381mm ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Spindle Speeds: 50 – 6000 RPM Spindle Taper: BT 30 Tool magazine capacity: 8 station Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg can be demonstrated if required

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, product height (max.): 380 mm, workpiece diameter (max.): 130 mm, production capacity: 7,200 unit/h, TECHNICAL DETAILS Number of cavities: 6 Capacity with standard bottles: up to 7,200 bph Product formats Bottle volume: 0.25 – 3.0 L Max. bottle height: 380 mm Max. bottle diameter: 130 mm Preform dimensions Max. preform length: 210 mm Neck inner diameter: 34 mm MACHINE DETAILS Dimensions & Weight Blow module dimensions: 2,000 x 2,200 x 2,200 mm Blow module weight: 8,000 kg Oven dimensions: 3,000 x 1,100 x 2,100 mm Oven weight: 2,000 kg Control cabinet dimensions: 1,500 x 1,000 x 2,100 mm Control cabinet weight: 1,000 kg Transformer 415V / 380V dimensions: 1,000 x 500 x 2,000 mm Transformer weight: 500 kg Preform hopper and conveyor dimensions: 3,000 x 1,500 x 3,500 mm Preform hopper and conveyor weight: 600 kg Preform feeder dimensions: 2,000 x 2,500 mm Preform feeder weight: 250 kg Infeed guide rail length: 2,000 mm Power supply Total power: 142 kW Mains connection: 380/420 V +/- 10%, 50 Hz +/- 1% Cooling water Cooling capacity: 16,000 kcal/h Water temperature: 10 – 12°C Flow rate: up to 6.0 m³/h Water pressure: 5 – 6 bar Compressed air Fsdpsx A Uu Eofx Aanopp Service air pressure: 7 bar Service air flow: 50 – 100 Nm³/h Blowing air pressure: up to 35 bar Blowing air flow for 0.25 – 3.0 L: 155 – 770 Nm³/h EQUIPMENT Transformer 415V / 380V Preform hopper and conveyor Preform feeder Infeed guides Adaptation to other voltages possible

Condition: used, Year of construction: 2016, machine/vehicle number: SO125, Used Blow Molding Machine Terekas up to 5L 1000 bph This used blow molding machine from Terekas, model FlexBlow 1, is designed for demanding PET bottle production, offering advanced flexibility and efficiency. With a maximum bottle capacity of up to 5 liters and a throughput of up to 1,000 bottles per hour, the system is engineered for operations that require consistent product quality across multiple neck finishes and formats. The FlexBlow 1 utilizes a linear blow molding architecture, equipped with a single cavity, making it ideal for short production runs, frequent changeovers, or pilot lines. It integrates seamlessly into existing filling and packaging lines, thanks to its modular design and compatibility with multiple container types. The preform feed system includes a tipper, unscrambler, and loader, all designed to ensure reliable, jam-free supply of preforms into the production cycle. The core of the process begins with a robust preform heating tunnel, employing infrared (IR) lamps enclosed within a secure, ventilated housing. Preforms are conveyed through the heating zone by an articulated chain system, which ensures precise and uniform exposure to the heat source. The IR heating zone is shielded by a protective grid, preventing accidental contact while maintaining optimal thermal consistency across the preforms. The tunnel design avoids excessive hot spots or thermal degradation of the preform, contributing to higher end-product quality and reduced scrap rates. Precise Control and Reliable Operation Fpedpfx Aj Adyymjanep After exiting the heating tunnel, preforms are transferred automatically into the blow molding station. The FlexBlow 1’s single-cavity blow unit utilizes high-efficiency pneumatic actuators and robust mold clamping mechanisms to produce containers up to 5 liters in volume. This configuration allows for rapid cycling and excellent pressure control throughout the stretch-blow sequence. The complete air handling system is engineered for reliability, with integrated air recovery to optimize compressed air consumption and reduce overall utility costs. Critical to the system’s operation is the dedicated chiller, which ensures mold cooling circuits remain within the required temperature range, guaranteeing consistent bottle wall thickness and minimizing cycle times. All pneumatic and hydraulic components are mounted in a well-organized auxiliary area, with clearly labeled connections for maintenance and diagnostics. Filtration and lubrication points are readily accessible, supporting a high level of system uptime and minimizing unscheduled stops. Machine operation and process parameters are managed through a touchscreen HMI panel installed directly on the electrical cabinet. This interface provides real-time control over all production settings, alarm management, and maintenance prompts. The entire machine is wired in a highly organized manner, with secured electrical panels, neatly routed cables, and clearly identified terminals for ease of troubleshooting. All safety guards and interlocks are present and functional, ensuring the operator’s safety while maintaining access...

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, year of last overhaul: 2024, compressed air connection: 10 bar, We offer 2 HUSKY machines. Available technical specifications for the HUSKY 2 machine, produced on 18/12/24, 23.5 GR, as per the listed data: Model: GL 6L 300 PET Type: P 100/120 E100 Series: 3.0 TONNE Hydraulic pressure: 180 BAR Weight: 57,800 kg Number: 14065 Date: 98/02/04 Encore Husky Package 20 Serial Number: 54360P Code: S2PP-N01 Reference Number: 726698 Year: 3123-64 Additional Information: Hot Runner and Mold Weight: 2315 gr (72) CAV MOLD 48 gr 2 lit. 28 gr 0.5 lit. HOT RUNNER 48 CAV MAAI 48 CAV MAAI 48 CAV KOBOTS / ROBOTS 48 – 1.4 – 27 gr 28 gr Available technical specifications for the HUSKY 1 machine, produced on 29/11/24, 10.5 GR, as per the listed data: HUSKY 1 type P100/120 E100 14/04/1998 SERIES 300 TONNER HYD. PRESSURE: 180 BAR WEIGHT: 21,600 kg Material / Specifications NOVTCO GL300 PET P 100/120 E100 3L Dates DATE: 14/3/14 DATE: 98/04/14 Details AW 5830-A01 72698 E. 3293-111 Remarks ENCORE HUSKY EXTENSION (2)T AP PERIOD 543588 HOT RUNNER AND MOLD 1QTS 92 (F2) WATER CAVITY The machines come with many spare parts and molds, as well as all auxiliary production machines, such as a plastic preform production or PET packaging line: The resin is stored in hoppers. It is dried using a dryer/dehumidifier. It is transferred to the Husky machine via vacuum pumps. The injection molding machine produces the preforms. Fpodpfx Aey Tpfieanjp The water circuit cools the molds and robots. There are filters, metal detectors, and conveyors for material and scrap management. The two lines are almost identical, with separate equipment for each line (No1 and No2). Code Description Function HUSKY Husky Machine Injection molding machine DRYER Dryer Drying of plastic resin FAN Fan Air circulation / cooling CONVEYING RESIN TO HOPPER Resin Transfer Transfer of raw material to hopper VACUUM PUMP Vacuum Pump Creating a vacuum for material transfer WATER PUMP Water Pump Circulation of cooling water DEHUMIDIFIER Dehumidifier Removal of moisture from air/resin RESIN HOPPER Resin Hopper Storage and feeding of material COMPRESSOR Compressor Supply of compressed air AIR TANK Air Tank Storage of compressed air WATER FILTER Water Filter Filtering of cooling circuit METAL DETECTOR Metal Detector Checking material for metal objects PLASTIC SYSTEM CONVEYOR Plastic System Conveyor Transfer of product/material PREFORM BREAKER Preform Breaker Breaking of rejected preforms STRAP Strapping Machine Binding of packaging OVERHEAD CRANE Overhead Crane Lifting loads

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: K787016, overall weight: 41,000 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 800 A, operating pressure: 40 bar, control voltage: 24 V, type of input current: three-phase, Equipment: documentation/manual, Krones Contiform S20 PET stretch blow molding machine – 20 cavities, output up to 40,000 units per hour. Used Krones Contiform S20 machine for manufacturing PET bottles. The machine is completely disassembled and prepared for loading onto a truck. Due to its disassembled condition, it is not possible to perform a test run or functional tests – it is sold as a complete set of components for reassembly by the buyer. Technical specifications: • Manufacturer: Krones • Model / Year: Contiform S20 / [2003] • Number of cavities: 20 • Nominal output (according to the manufacturer's specifications): up to 40,000 bottles/hour • Maximum container volume: up to 3 l (depending on the shape) • Oven: linear, with a 40 mm stroke • Neck size: 26/22 (PCO 1881) Scope of supply: [preform feeder, hopper/elevator and orienting device, chiller, molds, spare parts, etc.] Fpjdpfjz Euubex Aanop Inspection possible by prior arrangement – the machine can be inspected in its disassembled state, with the components laid out in Kutno. Loading at the buyer's expense. Transport to be agreed. Price on request.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, working width: 1,300 mm, overall weight: 7,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working width: max. 1,300 mm Number of spray booths: 1 Fpsdpo Af Hntefx Aanep Pump type: Wagner Number of spray guns: 4 MACHINE DETAILS Weight: 7,500 kg Number of transport packages: 7 EQUIPMENT Spray guns Documentation

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK Fodpfoz Eh Egsx Aanopp XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Fodpfx Aasxxb Rrsnspp Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2021, machine/vehicle number: DW2110130101, functionality: fully functional, power: 32 kW (43.51 HP), input voltage: 380 V, input current: 85 A, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 30 mm, number of axes: 4, number of slots in tool magazine: 10, total height: 2,400 mm, total length: 4,300 mm, total width: 2,250 mm, overall weight: 2,000 kg, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, Equipment: CE marking, We offer this used Apollo 4AX 2030 CNC Router, year of manufacture 2021. Manufacturer: Apollo Model: 4AX 2030 Year of manufacture: 2021 Condition: used Fpodpez Iz Imofx Aanjp Machine type: CNC Router If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2014, operating hours: 54,738 h, functionality: fully functional, machine/vehicle number: 369A61525, screw diameter: 54 mm, overall weight: 9,000 kg, clamping force: 687 kN, total width: 1,850 mm, total length: 5,500 mm, total height: 3,200 mm, Equipment: documentation/manual, For sale: ASB Nissei 70-DPH, version 4 ISBM machine. Included with the machine is a Piován desiccant air dryer. The machine is powered on and can be inspected while running in a dry cycle. Feds Ah H Dtepfx Aanjpp

Condition: good (used), Year of construction: 1998, operating hours: 89,340 h, functionality: fully functional, screw diameter: 90 mm, overall weight: 16,000 kg, clamping force: 650 kN, total width: 2,750 mm, total length: 5,600 mm, total height: 3,200 mm, Manufacturer: Sterling Model: 15 LBS Year of manufacture: 1998 Operating hours: 89,340 h Closing force: 650 kN Screw diameter: 90 mm BM Sterling APV, year of manufacture 1998 Complete control system replacement in 2008 with MACO-sys 6000, carried out by Davies-Standard LTD Fsdpfezfxwijx Aanepp PRICE REDUCTION OF 30%!!! Net price: from 45,000 EUR to 31,500 EUR!!!

Condition: used, Year of construction: 2012, XYZ Prototrak LPM Vertical Machining Centre (2012) Traverses X Y Z: 785 x 470 x 530mm, Table Size 900mm x 500mm, Spindle Speed 8000rpm, Spindle Motor Power 11kW, Prototrak, Rapid Feed XYZ Axis 20m/min, Spindle Taper BT40, 16-Station ATC. S/No. M7161, Machine Weight: 4200kg. Country of Origin: United Kingdom Fpsde Ah E Dxopfx Aansp Location: This lot is located in Leicester, UK. A charge of £200 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Fodox D Tbmepfx Aanspp Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.