Used Picture Frame for sale (11,698)

Condition: used, axle configuration: 3 axles, first registration: 06/2016, loading space length: 9,700 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 53 m³, Lightweight chassis version In aluminum (15-6-12) Two fully automatically welded I-section longitudinal beams with welded crossmembers. Chassis width 1,600 mm Axles and suspension: Disc brake 430 mm "off-road version" SAF-Intradisc light axle units 3 x 9 t with SAF air suspension, air springs in central arrangement to the chassis longitudinal beam, 1st axle liftable with starting aid and manual forced lowering, Smart Board info center, lifting/lowering valve, BVA brake wear indicator Tires and wheels 6 wheels with tires size 385/65 R 22.5 approx. 50% with Alcoa "Satin" 11.75 x 22.5 ET 120, universal wheel bolts for aluminum rims Kingpin 2" screwed into an 8 mm thick plate "light" Landing gear Two-speed landing gear with swivel foot for air suspension Braking system According to E.E.G. standard, two-line system Wabco, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard info center, Aluminum air tank system Electrical system According to STVZO guidelines with 2 five-chamber lights type Aspöck, 24-volt system with 2x7 and 1x 15-pole socket with side marker lights, 2 sep. LED reversing lights All air and electrical lines are neatly routed in plastic pipes! Tipping body/dump bed "smooth design" Body fully welded inside Aluminum dump bed, side walls 30 mm thick plank profiles (2-3 mm) 600 mm wide, welded, floor 6 mm thick, highly wear-resistant alloy (5383H34/HB 110) with 45-degree angled profile towards the side wall, front wall 4 mm reinforced in angled design, rear wall as universal door in straight design with 2 hinged doors in 2/3-1/3 design with a grain slide, ALU round profile for sealing the door gap welded on the rear doors on the side and bottom, rear doors with ALU partially smooth cladding, operation of the universal door automatic-pneumatic with separate lever lockable, rear support bar made of ALU swiveling, two tie-down straps with rubber buffers on the tipping body attached to the frame on the front wall, Hydraulic system: Tipping cylinder with "housing" suspension Nlsdpfxe Afr Hbs Abueh Hydraulic cylinder mounted on the front wall with a working pressure of 150 bar, manufacturer Edbro with approx. 2.5m hydraulic hose and quick-release coupling 1", tipping angle approx. 48 degrees Accessories 6 Parlok fenders, complete splash guard over the entire vehicle width attached to the U-profile, o. spare wheel holder ALU, side underrun protection on the right in foldable design, toolbox type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel support bars in the middle raised by approx. 150 mm, additionally a centrally mounted support bar holder for positioning a total of 2 support bars to increase the loading width, roll cover with a central light strip and separate reinforcements in the wear areas in approx. 660 gr./m2 quality with roll cover system, all-round rubber rope in the rear closure of the cover to be attached to two towing hooks on the swivel support bar at the rear, walkway on the frame in chassis color, cover closure on the side with quick-release fastener, cover closure at the rear with welded rubber rope to prevent water ingress, robust foldable underrun protection in aluminum, 2 "Clear-Pass" splash guards on the fender according to EC standard, mounted on the side of the frame, an ALU grain chute with a cover bag, holder for shovel, broom and scraper mounted above the axles, towing eye on the rear of the frame, etc... Offer and pictures are subject to change.

Condition: ready for operation (used), functionality: fully functional, A well built Pedestal Auger Filler from Webb Automation - controls have been simplified and replaced - original hardware and drive units - stainless steel contact parts throughout - three phase supply - automatic level probe to control a separate infeed device - complete unit working well Mounted on frame with castors and jacking feet Height Adjustable platform under outlet Nedpfx Abs Adq U Ijujlh Ideal Powder Filler for filling bags or containers Request videos and pictures via Whats App Ready to ship worldwide

Condition: used, mileage: 146,050 km, power: 125 kW (169.95 HP), first registration: 10/2023, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,967 mm, total width: 2,020 mm, total height: 2,616 mm, loading space length: 4,350 mm, loading space width: 1,770 mm, loading space height: 1,950 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal vehicle no.: 7590X ----Why autonext? Over 400 passenger cars & commercial vehicles immediately available. One of the largest vehicle showrooms in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing & trade-in options available. Complete vehicle range available at autonext? Mobility made easy. WhatsApp chat: ### Offer: Financing from 4.99% ### ----Get a clear picture now: Watch the video via the YouTube link to see the vehicle completely from the outside and inside: Top condition! 1st owner, German vehicle, non-smoking vehicle Complete service history, exclusively at Mercedes-Benz Next service in 392 days Body type: Maxi van Number of seats: 3 Rear view camera Navigation system Air conditioning (Tempmatik) Njdpjzrrakofx Abuolh Auxiliary heater Comfort driver's seat Reinforced front axle Tie-down rails in the cargo area On request, we can offer you a trailer coupling retrofit for only 599 euros, and if possible, an increase in the trailer load to up to 3.5 tons. ---- Special equipment: * MBUX multimedia system (7" touchscreen) * Bluetooth hands-free system * Steering wheel with multi-function buttons * 3-button remote control for central locking * Acoustic package * DAB tuner (digital radio reception) * Ceiling light in the cargo area with door contact switch * Entry handle on the rear pillar, rear right * Vehicle without vehicle lowering * Front cup holder * Rear door (opening angle 270 degrees) * Wooden floor in the cargo area * Folding cover for storage compartment * Air conditioning (Tempmatik) * Cable duct on the rear portal * Cable duct on the side wall * Navigation system for MBUX multimedia system * Fog lights with cornering function * Smoker's package * Spare wheel in driving condition * Spare wheel holder under the end of the frame including jack * Rear view camera * Seats in the driver's cab: Double passenger seat * Seats in the driver's cab: Comfort driver's seat * Step on the rear door * Paneling in the loading/cargo area: wood, high (up to the roof) * Paneling in the loading/cargo area: Wheel arch lining (plastic) * Tie-down rails in the cargo area - side wall on the partition rail * Tie-down rails in the cargo area - side wall on the roof frame * Reinforced front axle * Auxiliary heater (hot water) Standard equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard on the passenger side, adaptive brake light, driver's side airbag, anti-lock braking system (ABS), traction control system (ASR), drive type: rear-wheel drive, display for windshield washer fluid level, exterior mirrors elect. adjustable and heated, both, outside temperature display, brake assist, automatic switch-on for driving lights, entry handle for sliding door on the cargo area partition, electronic brake force distribution (EBV), electronic stability program (ESP), driving assistance system: breakdown management, driving assistance system: crosswind assist, suspension: stabilization level I, power windows electric 2-way, noise reduction measure outside, transmission 6-speed - TSG (Eco Gear), body/structure: high-roof standard van, keyless start, child lock, communication module (LTE) for digital services, fuel tank: main tank 71 liters, continuous cargo area partition, steering wheel (steering column mechanically adjustable), headlight range adjustment, truck registration, marker lights on the side, Mercedes-Benz emergency call system, engine 2.0 liters - 125 kW CDI CAT,

Condition: used, mileage: 116,050 km, power: 110 kW (149.56 HP), first registration: 12/2022, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,932 mm, total width: 2,020 mm, total height: 2,638 mm, loading space length: 3,350 mm, loading space width: 1,770 mm, loading space height: 1,950 mm, Equipment: ABS, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 5518X ----Why autonext? Over 400 passenger cars and commercial vehicles immediately available. One of the largest vehicle showrooms in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing and trade-in options available. Full vehicle range available at autonext? Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Get a clear picture now: Using the YouTube link, you can see the vehicle completely from the outside and inside: Top condition! 1st owner, German vehicle, non-smoking vehicle Complete service history, only serviced at Mercedes-Benz Rearview camera Navigation system Multimedia system MBUX (7" touchscreen) Comfort driver's seat Electrically adjustable and heated exterior mirrors LED cargo area light On request, we offer you a trailer hitch retrofitting for only €599, and if possible, an increase in the trailer load capacity to up to 3.5 tons. ---- Special equipment: * Multimedia system MBUX (7" touchscreen) * Bluetooth hands-free system * Multifunction steering wheel * Storage compartment in the driver's cab headliner * Acoustic package * Electrically adjustable and heated exterior mirrors, both * Exterior mirror without integrated turn signal * Front side turn signals * DAB tuner (digital radio reception) * Cargo area ceiling light with door contact * Suspension: Stabilizer level I * Noise reduction measure exterior Nljdpfxezh S Ele Abujh * Rear door (opening angle 270 degrees) * Wooden floor in the cargo area * LED cargo area light * Cargo area partition with window * Cable duct on rear portal * Cable duct on side wall * Steering wheel (steering column mechanically adjustable) * Marking lights, side * Navigation system for multimedia system MBUX * Fog lights with cornering light * Smoker package * Spare wheel in driving condition * Spare wheel holder under frame end including jack * Rearview camera * Seats in driver's cab: Comfort driver's seat * Seats in driver's cab: Driver's seat with armrest * Rear door step * Interior trim in cargo/passenger area: High plastic (up to roof) * Tie-down rails in the cargo area - side wall on railing Standard equipment: 3rd brake light, Adaptive brake light, Airbag driver's side, Anti-lock braking system (ABS), Drive type: Front-wheel drive, Outside temperature display, Brake assistant, Automatic headlight activation, Entry handle for sliding door on cargo area partition, Electronic stability program (ESP), Driving assistance system: Breakdown management, Driving assistance system: Crosswind assistant, Generator 200 A, Transmission 6-speed - FSG, Body/structure: Box high-roof standard, Communication module (LTE) for digital services, Fuel tank: Main tank 65 liters, Headlamp range control, Truck registration, Mercedes-Benz emergency call system, Engine 2.0 liters - 110 kW CDI CAT, Particle filter, Wheelbase 3924 mm, Low emission according to emission standard Euro 6d, Sliding door cargo/passenger area right, Safety belt system with warning system (passenger side), Safety belt system with warning system (driver side), Seat cover/upholstery: Fabric, Seats in driver's cab: Passenger single seat, Start/stop system engine, Daytime running light, Fleece battery 92 Ah, Immobilizer, Permissible total weight 3.50 t. ----MOT/emission test can be renewed upon request. ----Warranty and a "TÜV Profi Check" are of course available with us! We will also gladly take your vehicle in part exchange! We can also create an individual offer for y

Condition: used, Year of construction: 1994, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Sheet metal width: 3,000 mm Sheet metal thickness: 16 mm Frame width: 3,200 mm Overhang: 310 mm Stroke: 300 mm Work table Table width: 820 mm Table height above floor: 1,215 mm Clamping and cutting Number of clamps: 12 pcs. Nljdpoz S Nkxsfx Abujh Cutting angle: 0.5–2.5° Cutting angle adjustment: 1–2.5° Cutting gap adjustment: manual, via table adjustment Back gauge Back gauge: 0–1,000 mm Adjustment: motorized Positioning: digital Performance data Total power consumption: 30 kW Machine weight: approx. 19 t Dimensions Space requirement: approx. 3.8 × 2.65 × 2.85 m Overhaul and safety Overhaul: 2010 Safety features: safety light curtain EQUIPMENT Motorized adjustable back gauge Digitally positionable back gauge Electrically adjustable cutting angle Safety light curtain Loading/unloading table with conveyor belt

Condition: new, empty load weight: 9,550 kg, maximum load weight: 30,450 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,100 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Air suspension with raising and lowering functions, axle load scales, total loading platform length approx.: 9,100 mm, low bed approx.: 6,900 mm long, loaded loading height approx. 890 mm, 24 x lashing eyes, each 10 t, 12 x stake pockets in the outer frame, run-up ramps (approx. 3,100 x 760 mm), climbing strip on the outside of the ramps and rear slope, adjustable side ramps, wooden floor 68 mm thick, toolbox with lid for lashing chains or tension straps, contour marking according to regulations, rotating beacon, spring-loaded parking brake, incl. axle load indicators, vehicle dipped bath hot-dip galvanized, , extra charge for:, hydraulic ramp shifting = Price: 1,000 ¤, , -- Printing errors, mistakes and changes reserved, sample pictures --, More data at: !, More Details: ! Nledpfe Aawc Rjx Abush

Condition: used, Year of construction: 1993, Technical details: lifting capacity in kg: 4000 kg lift: Freihub nein mm fork length: 1600 mm Lifting height: ca. 3400 mm weight approx.: 4000 kg dimensions L x W x H: mit Gablezinken: 4,5x1,2x2,3 m dimensions L x W x H: ohne Gabelzinken:2,8x1,2x2,3 m - lift frame= Duplex model - fork carrier width 1030mm - fork arms W: 1400mm x diameter: 50mm x L: 1600mm - including charger - mileage 09/2023 see picture - tyres front/back solid rubber - axial distance 1800mm Nodpfsu Nv Uzsx Abuolh *

Condition: used, mileage: 170,149 km, power: 375 kW (509.86 HP), first registration: 01/2022, fuel type: diesel, empty load weight: 14,976 kg, maximum load weight: 11,024 kg, overall weight: 26,000 kg, tire size: 315/80 22,5, tire condition: 40 %, axle configuration: 6x2, wheelbase: 4,800 mm, next inspection (TÜV): 07/2027, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, total length: 6,600 mm, loading space volume: 16 m³, loading space length: 6,600 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Year of construction: 2021, operating hours: 170,149 h, front tire size: 315/80 22,5, rear tire size: 315/80 22,5, number of beds: 1, Equipment: ABS, additional headlights, air conditioning, cabin, crane, cruise control, differential lock, fog lights, onboard computer, sliding door, trailer coupling, truck registration, Vehicle number for inquiries: 41888 MAN, TGX * Year of construction: 2021 * ABS, Anti-lock Braking System * Trailer coupling * EBS, Electronic Braking System * Power windows * Cab * Automatic climate control * Crane * Cooler box * Air suspension * Lift axle * Retarder / ZF-Intarder * Power steering * Sleeper cab * Heated seats * Cruise control * On-board computer * Differential lock * Auxiliary headlights * Lashing points in the outer frame (Multilock outer frame) * Steerable axle * Stake pockets with stakes * Digital tachograph * Radio CD * Sound system * OBU preparation * Refrigerator * Electric windows + mirrors * AdBlue tank * Fog lights * Comfort suspension seat * Multifunctional steering wheel * Sun visor * Lane change warning system * Inspections: MOT / emissions test valid until 07/2027 * Transmission type: Manual transmission * Suspension: Air / Air * Gross vehicle weight: 26,000 kg * Unladen weight: 14,976 kg * Payload: 11,024 kg * Permissible gross vehicle weight: 26,000 kg * Tire condition, 1st axle: 40% -- 40% - Tire size: 315/80 R22.5 * Tire condition, 2nd axle: 40% | 40% -- 40% | 40% - Tire size: 315/80 R22.5 * Tire condition, 3rd axle: 40% -- 40% - Tire size: 315/80 R22.5 * Wheelbase: 4800 mm * Tire sizes: 315/80 R22.5 * Internal dimensions: L=6600 mm, W=2480 mm, H=1000 mm * Internal volume: 16 m³ * Pallet spaces: 16 * GM cab * Fully air-suspended * Crane: PK 17001 L TEC 3 * ComfortShift transmission * Intarder * Elevated seat control * Kinshofer pallet fork * Load hook * Galvanized platform frame Disclaimer: Subject to changes, prior sale and errors. More pictures and videos can be found on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing * Application for all (export) documents Nedpfx As Aa Idfjbuelh * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists, we will be happy to advise you.

Condition: used, CTS   CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber   The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber for conducting temperature and humidity tests on multiple test specimens simultaneously.   Device Description The climate test chamber can be used to test the function or material properties of a test specimen under temperature and humidity conditions. The good air circulation, with a correspondingly high volume of recirculated air, guarantees good transfer to the test specimen. The air handling unit is located at the rear of the interior. The units are located behind the device in a separate frame and are easily accessible. The control system is housed in a separate control cabinet. The control panel is integrated into the control cabinet door. To dehumidify the test chamber, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be purged with fresh air via a fan.   Technical Performance Data:   Temperature Tests: Temperature range -60 °C to +100 °C Temperature deviation ±0.5 to 1 K over time Temperature change rate, linear with test specimen and with heat radiation, measured in the supply air Heating: 2 K/min from -40 °C to +85 °C Cooling: 2 K/min from +85 °C to -40 °C   Climate Tests:   Temperature range +10 °C to +90 °C Humidity range 10 % to 95 % relative humidity in the dew point range +5°C to +89 °C Temperature deviation ± 0.5 K over time Humidity deviation ±1 - ±3 % r.h. over time   The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment.   Dimensions: Internal dimensions (test chamber / usable space): Volume: approx. 5,500 liters (5.5 m³)   Internal dimensions (approx.): Height: 2300 mm Width: 1600 mm Depth: 1550 mm External dimensions: Height: 2800 mm Width: 2250 mm Depth: 5000 mm   Nledpfx Abjzizmbjueh Operating Data:   Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Rated power: 58.3 kW (incl. 5 sockets) Rated current: 86.0 A Protection class IP 54   Technical Design:   Refrigeration unit water-cooled, low-noise, semi-hermetic, stepless power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R 23 / R 404 A   Notes   Inspection possible by arrangement (46325 Borken)   Shipping by freight forwarder possible – costs & organization on request   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by phone.

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,200 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading area length approx.: 8,200 mm, low bed approx.: 6,000 mm long, loading height incl. approx. 890 mm, 22 x lashing eyes each 10 t, 10 x stake pockets in the outer frame, loading ramps (approx. 3,100 x 750 mm), climbing bar on the outside of the ramps and rear slope, loading ramps adjustable to the side, wooden floor 68 mm thick, storage box with lid for lashing chains or tensioning belts, contour markings according to regulations, rotating beacon, vehicle hot-dip galvanized, , incl. axle load indicators, , surcharge for:, warning signs with lighting and rotating beacon, widening to 3 m with Holzer, Price: 500 ¤, , excavator trough, Price: 1,000 ¤ net, , , --  Misprints, errors and changes excepted, sample pictures --, More details at: !, More details: ! Nlsdpfxe Adpnae Abujh

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,800 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading bed length approx.: 8,800 mm, low bed approx.: 6,600 mm long, loaded platform height approx. 890 mm, 24 tie-down rings each 10 t, 12 stake pockets in the outer frame, access ramps (approx. 3,100 x 750 mm), climbing strip on the outside of the ramps and rear slope, access ramps laterally adjustable, 68 mm thick wooden floor, storage box with lid for lashing chains or tension belts, contour marking according to regulations, revolving beacon, vehicle hot-dip galvanized, incl. axle load indicators. Surcharge for: warning signs with lighting and revolving beacon, widening to 3 m with wood inserts, price: 500 €; digger arm recess, price: 1,000 € net. -- Printing errors, mistakes and changes reserved, sample pictures -- More data at: !, More details at: ! Nledpfxj Aduzrj Abuoh

Condition: used, empty load weight: 7,380 kg, maximum load weight: 27,620 kg, overall weight: 35,000 kg, axle configuration: > 3 axles, first registration: 11/2022, next inspection (TÜV): 01/2027, loading space length: 13,530 mm, loading space width: 2,500 mm, loading space height: 3,000 mm, loading space volume: 101 m³, total length: 13,530 mm, suspension: air, tire size: 245/70 17,5, tire condition: 60 %, color: white, Year of construction: 2022, front tire size: 245/70 17,5, rear tire size: 245/70 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference no. for inquiries: 41967 Wiese, Wingliner * Year of manufacture: 2022 * ABS, Anti-lock Braking System * EBS, electronic brake system * Air suspension * Lift axle * Rear-steering axle * Air connection, coupling head (red + yellow) * 15-pin connecting plug * Storage box / toolbox * Inspections: HU / AU valid until 01.2027 * Suspension: Air * Total weight: 35,000 kg * Tare weight: 7,380 kg * Payload: 27,620 kg * Permissible total weight: 35,000 kg * Axle manufacturer: BPW Nodpfs Adnwtox Abuslh * Tire condition, 1st axle: 50% - 50% - Tire size: 245/70 R17.5 * Tire condition, 2nd axle: 70% - 70% - Tire size: 245/70 R17.5 * Tire condition, 3rd axle: 70% - 70% - Tire size: 245/70 R17.5 * Tire sizes: 245/70 R17.5 * Internal dimensions: L=13530 mm, W=2500 mm, H=3000 mm * Internal volume: 101 m³ * Pallet spaces: 33 * Manufacturer: ITL Fahrzeugbau GmbH * Available in quantities of 2 * Electro-hydraulic side walls * Dimensions, top: 3700x2480x2530mm * Dimensions, bottom: 9810x2480x3060mm * End frame made of stainless steel at the front and rear * Electrically pneumatically liftable axle * Side walls are covered with film - removal of the lettering is possible * 25 pairs of lashing eyes embedded in the outer frame Disclaimer: Subject to changes, prior sale, and errors. Further pictures and videos can be found on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transportation of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: used, empty load weight: 7,610 kg, maximum load weight: 33,390 kg, overall weight: 41,000 kg, axle configuration: > 3 axles, first registration: 02/2015, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 89 m³, total length: 13,620 mm, suspension: air, tire size: 385/65 22,5, tire condition: 70 %, color: blue, Year of construction: 2015, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference no. for inquiries: 42000 Krone, SD * Year of manufacture: 2015 * ABS, Anti-lock Braking System * EBS, electronic braking system * Air suspension * Used tarpaulin * Edscha / sliding roof cover * Load securing certificate DIN EN 12642 Code XL * Lashing eyelets in the outer frame (Multilock outer frame) * Portal door * Aluminum side boards * Air connection, coupling head (red + yellow) * Spare wheel holder * Connecting plug 2x7-pin * Connecting plug 15-pin * Lifting and lowering device * Storage box / toolbox * Document box * Suitable for rail transport - can be lifted by crane * Coil trough * Suspension: Air * Gross vehicle weight: 41,000 kg * Unladen weight: 7,610 kg * Payload: 33,390 kg * Permissible gross vehicle weight: 41,000 kg * Axle manufacturer: BPW * Tire condition, 1st axle: 70% -- 70% - Tire size: 385/65 R22.5 * Tire condition, 2nd axle: 80% -- 80% - Tire size: 385/65 R22.5 * Tire condition, 3rd axle: 70% -- 70% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Internal dimensions: L=13620 mm, W=2480 mm, H=2650 mm * Internal volume*: 90 m² * Pallet spaces: 34 * On request, we will send you a video and further pictures. Disclaimer: Subject to changes, prior sale and errors. You can find more pictures and videos on our website. Our extensive services include, for example: * Purchase / sale / rental of commercial vehicles * Quick and uncomplicated financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Nlodpfs Afbmqox Abujh Please ask our trained specialists, we will be happy to advise you.

Condition: used, Year of construction: 1999, Transnorm spiral helix belt curve conveyor left 90°-775-600 IR600 RA2008 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Nledpfx Ajk Abtpobuoh Type designation: belt curve conveyor TS 1600-105 frame width (NB): 775 mm belt width (GuB): 600 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 90° degrees (coiled 191mm rising) Incline: 191 mm / 90° = 764 mm / 360° Support feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gearmotor SA37/T DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) year of construction: 1999 Optionally available: Supports Side guide one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm spiral helix belt curve conveyor left 90°-800-700 IR900 RA2141 Technical data: Frame width (NB): 800 mm belt width (GuB): 700 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees decline: 200 mm / 90° = 800 mm / 360° support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37/T DRS71S4BE05/MM05/LN Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Nledpfx Abeq Twlteueh Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2014 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,100 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading area length 8,100 mm, loading height approx. 900 mm, 20 x lashing eyes each 10 t, 14 x stake pockets in the outer frame, drive-on ramps (approx. 3.000 x 750 mm), drive-on ramps laterally adjustable, spring lifter for 1-piece ramps, wooden floor 70 mm thick, storage box with lid for lashing chains or tension belts, contour marking according to regulations, spring-loaded parking brake, vehicle hot-dip galvanized, , surcharge for:, warning signs with lighting and rotating beacon = price: 800 ¤, widening to 3 m = price: 1.100 ¤, hydraulic 1-piece ramps 500 ¤, also with 9 m loading area length + widening in stock , , , , -- Subject to printing errors, mistakes and changes, sample pictures --, More data under: !, More Details: ! Nlsde Afc Hlopfx Abuoh

Condition: used, Himmel HF120 mitre jointing machine for the precise and secure gluing of mitre joints in wooden frames, glazing bars and mouldings using white glue. The machine enables a fast setting time thanks to high-frequency technology, pneumatic clamping mechanisms and precise alignment of the workpieces. Ideal for furniture and picture frame manufacturing. Machine not in working order. Technical data: Nledpeztv D Aefx Abuoh - Cycle time: approx. 4 seconds - Strip width: max. 100 mm - Strip height: max. 100 mm - Operation: foot switch - Possible angles: 90°, 120°, 135°

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor GKF 1650-750-550 IR600 70° right RA1441 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Nljdpfxjk Abazj Abuoh Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 1650 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optional Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Characteristic / Accessories: Lateral guides included on both sides Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor GKF 180°-750-550 IR1000 left RA1483 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 4820 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 1000 mm Conveying angle: 180° degrees support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Nsdek Abcrspfx Abujlh Year of construction: 2001 Special feature / Accessories: Lateral guides included on both sides Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2012, Transnorm belt curve conveyor right 90°-885-700-IR400 RA1830 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Conveying length middle radius (NL): 1178 mm Nledpfx Abeqy Sgcsuoh Frame width (NB): 885 mm belt width (GuB): 700 mm height (BH): 170 mm height including motor (MH): 370 mm Inner radius (IR): 400 mm Conveying angle: 90° degrees Conveying speed (v m/s): 0,217m/s Drive: SEW gear motor Electrical data: 50Hz V230/400, kW 0.25 / S1 Belt:(wear see pictures) Year of construction: 2012 Optionally available: Supports Side guide one and both sides frequency inverter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Riser with Arch and Straight GF 7000-650-500 RA1368 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 7.000 mm (riser 4080mm + bow 500mm + upper straight 2420mm) Nsdpfxsk Aa S Te Abuelh Frame width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Drive drum: Ø = 64 mm Deflection roller: Ø = 34 mm Belt type: HSL 8 E year of construction: 2001 Pitch: adjustable Optionally available: Supports Side guide one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert belt conveyor GF 1290-650-500 RA1392 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1290 mm Frame width (NB): approx. 650 mm Nodek Aa Tqopfx Abuelh belt width (GuB): 500 mm height (BH): 105 mm Support feet optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB 5 E Year of construction: 2001 Optionally available: Supports Side guides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, LDS + Andreas Schmid Vibration test system with climate chamber LDS V721 + TK 8000/-50/120 4-shaker MIMO system with 8 m³ climate test chamber, -55 °C to +140 °C For sale is a used vibration test system with four LDS V721 shaker exciters and an Andreas Schmid climate test chamber. Technical data, shaker system: Shaker exciters: 4 × LDS V721, air-cooled Amplifier: PA 1000L Controller: imv K2 MIMO (Multi Input Multi Output) Software: imv K2 Excitation types: Sine / Random / Shock / Real-time profiles Frequency range: 5 – 4,000 Hz Velocity: max. 0.7 m/s Displacement amplitude: max. 25.4 mm p-p (1 inch) Acceleration: max. 44 g RMS / 66 g Peak Load capacity: max. 100 kg per shaker Force vector per shaker: 2.9 kN peak sine / 1.9 kN RMS random / 4.6 kN peak shock Mounting area: approx. 1,000 × 1,000 mm Aluminum profile frame The four shakers can be operated synchronously or asynchronously via the MIMO controller. Without the profile frame, mobile use as a modal shaker for large test specimens is possible. Nedezg Tv Njpfx Abujlh Technical data, climate chamber: Manufacturer: Andreas Schmid Anlagentechnik GmbH Type: TK 8 Monoblock, welded Test chamber: 2,000 × 2,000 × 2,000 mm (8 m³) Door: 2,000 × 2,000 mm 2 test chamber windows in the door: 460 × 460 mm Temperature range: -55 °C to +140 °C Temperature stability: ±0.5 K over time Climate range: +10 °C to +95 °C Humidity range: 10 – 95 % RH Refrigerant: R404A / 29 kg Insulation: 140 mm PU, CFC-free, B1 according to DIN 4102 Dimensions and weight: Chamber without base: approx. 2,340 × 3,600 × 2,800 mm Chamber with base: approx. 2,340 × 3,600 × 3,800 mm Unit: approx. 1,200 × 2,400 × 2,200 mm Weight, shaker system: approx. 2,000 kg Weight, climate chamber: approx. 4,500 kg Total weight: approx. 6,500 kg Equipment: 4 × LDS V721 shaker exciters PA 1000L amplifier imv K2 MIMO controller and software 1 × 1 m aluminum profile frame Andreas Schmid 8 m³ climate test chamber Refrigeration unit Accessories as shown in the pictures Application areas: Vibration and shock testing Climate and temperature testing Modal analysis Automotive and component testing Research and development Scope of supply: LDS shaker system with amplifier and MIMO control Andreas Schmid climate test chamber with unit Existing accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Zwick Type: BT1-FR050TH.A1K 50 kN Material testing machine Zwick/Roell BT1-FR050TH.A1K material testing machine – Precise strain gauge tests Note: No PC included!! Highlights: Testing force: 50 kN (tensile / compressive) High-precision TC-MODCSCC module for strain gauge load cells (4- & 6-conductor) Measuring range: 0.2 – 165 % nominal value, measurement value acquisition up to 500 Hz Maximum resolution: up to 297,000 points (at 50 Hz) Positioning repeatability: ±10 µm Crosshead speed: 0.0005 – 600 mm/min Robust design, compact dimensions: 1,814–2,688 mm height, 936 mm width, 722 mm depth Low noise: 59 dB(A), ambient temperature +10 to +35 °C, humidity 20–90 % Special features: Ideal for research, development, or industrial material testing Dimensions & weight: Nlsdpfx Ajzii Ugsbueh Load frame: Testing force (tensile/compressive): 50 kN Load frame height: 1,714 mm Overall height: 1,814 – 2,688 mm Load frame width: 760 mm Overall width: 936 mm Load frame depth: 477 mm Overall depth: 722 mm Weight: With electronics unit: 230 kg With typical attachments: approx. 300 kg Condition: used Scope of delivery: (See picture) ZwickRoell BT1-FR050TH.A1K testing machine Operating manual (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 2016, condition: refurbished (used), functionality: fully functional, This is an SCC 101 combination oven/steamer in an electric model (left-hand door), from the premium manufacturer Rational, manufactured in 2016. The combination oven/steamer is a unit from the latest SCC series, featuring triple-pane glass and LED lighting. The unit has been fully refurbished in our in-house workshop and is in perfect working order. The base frame shown in the picture is not included in the offer but can be purchased as an option. You will receive an invoice with VAT shown. These are example images; original images will follow shortly. The recommended retail price (RRP) is: €12,920 net. Service: We will gladly assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational equipment type? Ask us; we have access to a wide range of used and new equipment. We will gladly advise you on all equipment types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: • 6 months warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. Nljdpfx As Adzqyobuoh • High-quality branded equipment at fair prices. • Professional refurbishment/inspection & expert cleaning. • Tested & fully functional - or your money back. • Flexible shipping or self-collection options. • Competent advice – before and after purchase. • Provision of operating manuals, connection diagrams & spare parts. • Inspection according to DGUV V3 This combination oven/steamer offers space for 10 x 1/1 GN containers. In automatic mode, the unit automatically recognizes the ideal cooking path, the size of the food, the quantity to be processed, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical data: • W x D x H: 847 x 776 x 1042 mm • Power connection: V: 400 / kW: 18.6 / Hz: 50/60 • Capacity: 10 x 1/1 GN • Weight: approx. 135 kg • Serial number: E11SI16102552734 • Year of manufacture: 2016 Condition: used, fully refurbished, fully functional Additional information: • In combination oven/steamer mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C) and combination (30°C to 300°C) • Care Control - self-cleaning function • Core temperature sensor • Handheld spray nozzle with automatic retraction • 8.5-inch color display and touchscreen • 5 fan speeds programmable • Integrated, maintenance-free grease separation system • Automatic start time pre-selection • 7 cleaning levels for unattended cleaning - also overnight • Humidification adjustable in 3 levels - from 30°C to 260°C • 5 programmable fermentation levels • USB interface • Seamless, tub-shaped hygienic cooking chamber, rounded corners • Halogen cooking chamber lighting Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Subject to change and errors. Do you have any questions, would you like to receive advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively subject to our general terms and conditions.