Used Window Frame for sale (16,014)

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, The machine is fully operational and in good condition. Working dimensions: 3200 x 2200 mm Gjdpexmr Rxsfx Agpoit Dimension adjustment is electrically controlled from the control panel. Powered by a hydraulic unit.

Year of construction: 2019, condition: used, Used transport frame MMW LIMITED Model ST2201-5-3 Max 5400kg Godpfx Aoy Nkkljgpsit 'A'-frame for windows MMW Ltd ST2201-5-3, SWL-5300kg

Condition: good (used), Year of construction: 2010, functionality: fully functional, Ruchser wing transport trolley with protective felt, 15 compartments each 110 mm wide, width: 900 mm, height: 2400 mm, length: 2200 mm. Gijdpfx Agoy Dfwiopot

Year of construction: 2012, condition: excellent (used), Ruchser roller conveyor for windows with 90° turning device left/right length 4400mm Electrically driven accumulating rollers with 2 parallel system components pneumatically tiltable from vertical 7° Giodpfelpcc Iex Agpst outside to vertical 7° inside. Plant parts 1900 mm high with rubber roller strips. Between the rubber strips stainless steel plates 2 mm deeper for sliding surface clip holders. Inlet and outlet with edge protection rollers up to 3000mm high as rubber rollers. Infeed track 2000 mm, outfeed track 4000mm driven accumulation rollers. Control and operating element mounted on freely adjustable stand.

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm Gsdpfx Ascmat Ujgpoit the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Condition: excellent (used), functionality: fully functional, machine/vehicle number: FN744944, Year of construction: 2025, operating hours: 15 h, load capacity: 2,000 kg, lifting height: 3,000 mm, free lift: 150 mm, load center: 500 mm, fuel type: electric, Jungheinrich forklift from 2025 with only 15 operating hours! TECHNICAL DETAILS Load capacity: 2,000 kg Lift height: 3,000 mm Free lift: 150 mm Load center: 500 mm Fork length: 1,200 mm MACHINE DETAILS Gjdpfx Aoy Nc Rwsgpeit Power type: electric Mast type: Duplex Power: 9 kW Battery capacity: 750 Ah Remaining battery capacity: 100% Battery voltage: 48 V Tyre condition: 100% Own weight without battery: 2,350 kg Battery weight: 962 kg to 1,094 kg Operating hours: 15 h EQUIPMENT Lighting Clamp hydraulics Pallet forks Side shifter Fork rotator (180 degrees)

Condition: used, Year of construction: 2012, total height: 1,450 mm, total length: 1,200 mm, total width: 800 mm, Type of fuel: Electric Colour: Grey Drive: motorised Empty weight: 596 kg Gsdpfxewtm H Re Agpeit - Year: 2012 - Documentation available: No - CE certificate present: No - Serial number: ME000659 - Drive: Electric - Type: Attachment - Transport dimensions: 1200mm x 800mm x 1450mm (l x w x h) - Transport weight [kg]: 596kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2017, functionality: unexamined, Used HEGLA Glass Packlifter & Sheet lifter with frame – Sold as Seen Offered for sale is a used HEGLA glass transport and handling system, comprising steel support frames, vertical transport racks, safety guarding, and an integrated access platform with stairway. Manufactured by HEGLA Maschinenbau GmbH & Co. KG (Germany), this robust industrial system is designed for the safe unloading of packs, and handling of large glass sheets within a production environment. Gisdpfox Tpg Hsx Agpst Key details  Manufacturer: HEGLA Maschinenbau GmbH & Co. KG Type: Transporteinrichtung (Transport System) Year of manufacture: 2017 Load capacity: 3,000 kg Max load height: 2,550 mm Approx. machine weight: 940 kg CE marked Construction & features: Heavy-duty steel frame construction Multiple vertical glass support racks with rubber contact pads Integrated safety fencing and guarding Access platform with industrial steel staircase and handrails Overhead beam structure suitable for handling integration Floor-mounted and free-standing sections Condition: Used, with visible cosmetic wear including paint chips and surface marks consistent with normal industrial use Structurally complete and previously operational at time of decommissioning No testing carried out since removal Sale terms: Sold as seen No warranty given or implied Buyer responsible for inspection, loading, and transport Power, controls, and ancillary equipment only included where visible in photos

Year of construction: 1968, condition: used, functionality: fully functional, machine/vehicle number: 2250, old flying beam edger 1300; complete machine with full electrical panel, protective guard, cover, multiple saw blades, electric width adjustment Gedpfsy Rmp Tjx Agpoit

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, input voltage: 230 V, type of input current: three-phase, working height: 150 mm, We offer this very well-maintained SCM Multiflex C window and door machining center, year of manufacture 1995. Purchase date: June 1995 Tenoning carriage power: 15 hp Profiling spindle power: 10 hp each Tenoning spindle height: 320 mm Profiling spindle height: 320 mm Electrical connection: 3x230 V Glazing bead recovery system The machine is still in very good working order. It has had only one owner throughout all these years, used exclusively in a family carpentry workshop (father and son). Therefore, the machine is certainly not worn out. Reason for sale is the modernization of the machinery fleet. A new SCM corner joint machine has been acquired. The machine remains fully operational and can be inspected and tested until June. Gisdpfxsyvhnuj Agpet All features and functions are still intact. Sold without tooling (cutters).

Condition: used, Year of construction: 2009, max. workpiece length 4500 mm profile spindle 1 Stück main drive 20 kW Control Siemens Weinig Conturex 2 C 114 ----- Working width: 40-260 mm Godpfx Aowunwyegpoit Working height: 25-110 mm 2 x PowerGrip clamp tables, 2 x 2280 mm ----- Workpiece length 200 - 4,500 mm Workpieces over 2,700 mm in length are machined using a repositioning cycle. Main spindle 1: ----- Motor with brake 20 kW HSK 63F Electronically adjustable speed 2,000-18,000 rpm Maximum tool length from flat surface HSK 63 F: 290 mm With C-axis Tool magazine: ----- Number of pockets: 30 mm Pitch between pockets: 100 mm Permanently installed multi-spindle drilling head ----- For horizontal and vertical drilling and milling work without tool changes ----- Price ex-site Prices for disassembly and loading onto customer trucks Transport within Germany and abroad as well as reassembly Commissioning and, if required, new profiles are available upon request! Used tools included (drawings available upon request): ----- Wood: IV 68, 78, 88, opening inside and out, with hinged weatherboard Wood-aluminum: IV 68/68, 78/78, 87/68, 97/78 Lift-and-slide doors IV 68 and 78 Front doors IV 68 and 78 Pivot windows Corner connection: counter/dowel Technical specifications according to the manufacturer - no guarantee! Detailed technical description available upon request!

Year of construction: 2026, condition: like new (used), BigBag frame for emptying Top support for spreader beam Spreader beam for forklift / crane Godpfx Ajy Rfbhjgpoit

Year of construction: 1961, condition: ready for operation (used), A hydraulic single-column C-frame press Müller is available. Press force: 63t, stroke: 560mm, throat depth: 325mm, installation height: 700mm, table dimensions X/Y: 640mm/640mm, ram surface: 560mm/560mm, machine dimensions X/Y/Z: approx. 2000mm/1200mm/3100mm, weight: approx. 7500kg. The machine has a motor malfunction. An on-site inspection is possible. Gjdpfx Agey Rtg Espeit

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control CNC Giedpfxjy Hl Iys Agpot SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- INCLUDES extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): ----- - ??Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: good (used), Offer 25348 Technical data: Giodpfsy Nl A Ajx Agpot - 15 units 300 x 200 x 100 mm - Left and right versions - Total weight approx. 250 kg

Condition: used, Kieselguhr frame filter. Sterilizable universal filter for liquid filtration with kieselguhr. Stationary filter with square elements in a vertical row arrangement. Hydraulic filter sheet pressing with hydraulic control on the built-in electrical control panel. Additional title: kieselguhr filter, years of manufacture 1979 - 2010 Capacity approx.: 850 hl/h Kieselguhr filter - filtration area approx. 174 - 242m2 Operating pressure: 8 bar Power: 6 kW Voltage: 220/380 V Frequency: 50 Hz Length: 10100 mm Width: 1320 mm Height: 1750 mm Formats: Square filter elements Operation / Control: Built-in control panel Giedpfsxbn Ntsx Agpst Material: Stainless steel Position: Horizontal Base construction: Frame Features: Filter plates; filter frames; collection tray with removal screw; hydraulik filter plate compression; hose pump Layer patterns: Vertical row arrangement

Condition: used, Sterilizable universal filter for sterilization filtration. Stationary sheet filter with square filter elements in a vertical row arrangement, hydraulic filter sheet pressure. Hydraulic control from built-in electrical control panel. Additional title: Sterilisation filter, years of manufacture 1979-2010 Capacity approx.: 750 hl/h Sheet filter - filtration area approx. 356 - 493m2 Operating pressure: 8 bar Power: 6 kW Godpfx Agjxbn N Hspoit Voltage: 220/380 V Frequency: 50 Hz Length: 10100 mm Width: 1320 mm Height: 1750 mm Formats: Square filter elements Operation / Control: Vertical row arrangement Material: Stainless steel Position: Horizontal Base construction: Frame Features: Filter sheets; hydraulik filter plate compression; hose pump Layer patterns: Vertical row arrangement

Year of construction: 1979, condition: used, Combination Kieselguhr and Sheet filter. Stationary sheet filter with square filter elements in vertical row arrangement. Hydraulic filter layer compression. Control of hydraulics from built-in electrical panel. Additional title: Kieselguhr and sheet filters as a combination design; years of construction 1979 Capacity approx.: 380 hl/h Combination filter - filtration area approx. 76 - 108m2 KG; 18m2 Sheet with beer filtration Operating pressure: 8 bar Power: 6 kW Voltage: 220/380 V Frequency: 50 Hz Gijdpfx Agevcqn Sopst Length: 10100 mm Width: 1320 mm Height: 1750 mm Formats: Square filter elements Operation / Control: Built-in control panel Material: Stainless steel Position: Horizontal Base construction: Frame Features: Filter plates; Filter frames; collection tray with removal screw; hydraulik filter plate compression; hose pump Layer patterns: Vertical row arrangement

Condition: used, Year of construction: 1989, Capacity: 80 ton Throat depth: 280 mm Ram stroke: 8 - 140 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 520 mm Table surface area : 850 x 670 mm Gisdpfx Asy Hqz Sogpet Slide area: 550 x 400 mm Hole in table: 250 x 180 mm Number of strokes: 20 - 100 s.p.m. Required power: 7,5 kW Dimensions L x W x H: 2210 x 1510 x 2750 mm Oil volume: 50 l Die weight at the ram max.: 300 kg Weight of machine approx.: 8,3 ton

Condition: good (used), Welded frame, used Manufacturer: CREA-SWISS Giodpfx Agoy At A Dopot Technical Data Brand: CREA-SWISS Max. frame size: 3,000 x 2,400 mm Min. frame size: 470 x 610 mm Profile height: up to 115 mm Height tolerance compensation: from -1 mm to +1 mm Dimensions: L 3.6 x W 1.5 x H 2.0 m Weight: 280 kg Advantages - Single-operator device: set external dimensions, insert profiles, adjust height differences, and weld completely on both sides, all by one person - Precise adjustment for accurate frame construction - Rotatable around the longitudinal axis - Fully welded in a single clamping - Fine adjustment of miter edges - Mobile workstation on castors - Suitable for all types of frames (steel windows, fire doors, or angle steel frames) All information provided without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 1994, Height adjustment: via digital display Godpfx Aoy Hrypegpoit Height adjustment: 100 mm pneumatic Drilling stroke / depth: 150 mm manual Cross adjustment: 320 mm with grid Motor: 1.5 kW Operating pressure: 6 bar Table surface: 1100 x 240 mm Weight: 255 kg Dimensions: 1100 x 1000 x 1400 mm Location: Nattheim

Condition: used, Year of construction: 2000, Storage location: Nattheim Gedpovwdmwofx Agpeit

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Gisdpfsvvkmbjx Agpot Storage location: Nattheim

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, WEINIG Unicontrol UC 10-5 Window Production Machine 1. Electronically controlled crosscut saw with laser switching between saw cutting and zero-point wheel, 3 kW motor 2. Grooving spindle 50 x 630 mm for tools 6 x 80 mm, 15 kW motor 3. Longitudinal/synchronous profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 4. Grooving spindle (between 1st and 2nd lifting spindle), D = 40 x 40 mm, axially indexed, 3 kW motor 5. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 6. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 7. Clamping spindle 40 x 150 mm, 3-position axial cycle, 2-position radial cycle, 3 kW motor Saw and grooving spindle on the right side, 3 kW motor Hardware spindle 40 x 150 mm, 3 kW motor Adjustable feed speed 6-12 m/min, 1.1 kW motor Giedoxmr N Iopfx Agpst 4-position counter changer Electronic length stop, 3600 mm Workpiece return system with automatic rotating mechanism Automation package Interval-controlled sash support Double parts package Laminated fabric tables (for sanded surfaces) Pressure guide on the left, max. wood width difference 100 mm Machine in very good technical and visual condition

Condition: like new (used), Year of construction: 1991, Floor space: 1 m x 0.70 m x H 2 meters. Gooseneck 250. Control panel on the left. Machine in very good condition – used very little. Table 400x360. Drawer with opening. Giodpfx Asyz Dxaegpst