Used Pipe Processing Machine for sale (85,777)

Condition: good (used), Year of construction: 2010, 1 x Marel Carnitech IPS3000 MK2 Slicer Hedsxxzgaspfx Ah Ujg Year: 2010 Located in London, UK

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 18-04-DD38, total length: 3,200 mm, total width: 1,000 mm, workpiece weight (max.): 850 kg, For sale here is an edge processing machine from Rehnen, model KBA. Sanding unit Oscillating sanding and fine sanding The entire sanding unit oscillates steplessly by 30 mm Milling unit at the top with R10 cutter Milling unit at the bottom with R10 cutter Units are equipped with tracing/feeler support Profile sanding unit Profile sanding of radii and bevels on top and bottom with continuous sanding belt Connected load: 7.3 kW Sanding belt dimensions (edge): 150 × 2000 mm Sanding belt dimensions (profile): 30 × 1960 mm Machine size: 1000 × 3200 mm Material thickness: 20–90 mm Min. material length: 90 mm Min. material width: 60 mm Weight: approx. 850 kg Extraction connection diameter: 160 mm To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment. The sale is made in its current condition. Technical data, condition description, year of manufacture, and scope of delivery are as per manufacturer’s brochure, without guarantee. For used machines, any warranty is excluded; the following applies: “sold as seen.” Hjdpfsx Eb Nuex Ah Ujg

Condition: refurbished (used), Year of construction: 2006, machine/vehicle number: 439917, type of input current: three-phase, total length: 2,200 mm, year of last overhaul: 2025, working width: 1,800 mm, total width: 2,200 mm, total height: 1,380 mm, roller length: 915 mm, overall weight: 4,082 kg, Fully refurbished Roskamp SP 1600 Roller Mill Single high pair Roll length: 915 mm Roll diameter: 405 mm Hsdpfjx Aifljx Ah Uog Weight: 4,082 kg Motor power: 45 kW Year of manufacture: 2006

Condition: good (used), functionality: fully functional, total width: 750 mm, total length: 950 mm, total height: 1,530 mm, input voltage: 400 V, Dominioni Pasta Machine P55R – professional pasta machine for fresh pasta production. Robust and reliable Italian quality, ideal for restaurants, caterers, and production kitchens. Suitable for various pasta types, easy to operate and clean. Hsdexn Na Tspfx Ah Usg

Condition: refurbished (used), Year of construction: 2009, Rex stainless steel bowl cutter Hjdpfx Aet Da Eljh Usg Capacity 125 litres With unloader arm and disc 2 speed knife shaft 1,500 / 3000 rpm 3 speed bowl Safety interlocked lid Currently being refurbished

Condition: repair required (used), Year of construction: 2005, functionality: not functional, total length: 1,100 mm, total width: 1,600 mm, overall weight: 1,550 kg, Handtmann vacuum filler damage and selling for parts. Hedpfexxlrmjx Ah Ueg

Condition: new, Year of construction: 2025, functionality: fully functional, Simply Center Punch – The Center Marking Aid! A revolution in precision: We present the “Simply Center Punch” The world's only center marking device – an exclusive innovation from Northern Germany. The Problem No more inaccurate center marking of round parts - Are you familiar with the challenges of precisely center punching shafts or rods ranging from 15 mm up to 400 mm? - Inaccurate positioning. - Poor lighting conditions - No glasses for older users - Time-consuming manual alignment Hsdpfx Ahsxb Ucao Ujg - Inefficient and error-prone processes - The market does not offer a universal and reliable solution for varying diameters. Our Solution: Simply Center Punch – A World First! Simply Center Punch: Precision made simple. - Globally unique: A center punch device / center marking aid developed and utility model protected by us, setting new industry standards. - 100% in-house development: From the first concept to the finished product – all from a single source. - Manufactured in-house: We guarantee quality "Made in Germany." - Versatile use: For diameters from 15 mm to 400 mm. - Center marking at the push of a button: Simply position, turn the handle, and mark the center. Your Advantages at a Glance Your benefits. - Maximum precision: Centers drill holes and markings with accuracy up to 0.3 mm. - Saves time and money: Speeds up your workflow and reduces rework. - Effortless handling: Intuitive operation requiring no prior experience. – Weight just 780 g. - Universally applicable: One tool for nearly all diameters in mechanical engineering, metalworking, etc. - Robust and durable: Made from high-quality materials for professional, continuous use.

Year of construction: 2009, operating hours: 5,387 h, condition: ready for operation (used), functionality: fully functional, overall weight: 12,000 kg, total length: 15,000 mm, rotational speed (max.): 24,000 rpm, working length: 7,500 mm, Functions: Sawing, notching, milling, drilling, thread tapping, lock case machining TECHNICAL DETAILS Number of controlled NC axes: 14 Machining length: 7,500 mm Max. traverse speed X / Y / Z: 60 / 60 / 30 m/min A-axis rotation: ±110°, continuous C-axis rotation: ±220°, continuous Tool holder: HSK-63F Tool dimensions (milling cutter/drill, max. diameter/length): Ø 50 mm / 200 mm Tool dimensions (disc milling cutter, max. diameter): Ø 500 mm Speed range: 1 - 24,000 rpm Milling motor power: 16 kW Number of tool magazine slots: 16 Number of special tool slots: 2 Automatic clamping jaw positioning: Yes Number of clamping jaws: 8 Profile system with quick-change system: Yes Machining features Max. cross-section WxH / length for single bar machining: 400 x 300 mm / 7,500 mm Min. cross-section WxH / length for single bar machining: 30 x 30 mm / 300 mm Movement: Tool Max. number of profiles per machine loading: Up to 8 profiles (depending on individual bar length) Number of fixed profile stops: 2 Hjdex Azt Ispfx Ah Uog Automatic clamping jaw relocation during 2 machining steps: Yes Steel processing (up to 5 mm wall thickness): Yes Electronics / Software equipment Machine PC processor: Yes Control panel with display and keyboard: 19" touch TFT color display Machine operation based on Windows®, menu-driven: Yes Custom programming without NC/CNC knowledge: Yes Schüco CAM installable on office PC (machining visualization): Yes MACHINE DETAILS Dimensions: 15 x 4 x 5.5 m Weight: 12 t Operating hours: 20,616 h Spindle hours: 5,387 h

Condition: used, Year of construction: 2021, Dicer Holac Cubix with hopper, with feeding, with discharge conveyor. Videos available on request. Hodsxpydxspfx Ah Ujg

Condition: good (used), Year of construction: 2018, Sepamatic 410 Separator Sepamatic 410 is used for separating raw meat material from waste components, such as cartilages, veins, skin and bones. This machine is used for increase grade and separating raw meat material for meat mechanical processing and meatbone residue. Raw material retract between high-elastic clamping band and steel perforated drum circling together and go through brief pressing operation. Hard, big and agglutinate parts stay outside the drum but softened parts are pushed inside the drum through the holes. Productivity depends from the raw material is used, clamping pressure and size of the holes of drum. Technical details: Capacity: 200-800 kg\h Drum :  1.3 and 5 mm Hjdpfou Nhdnsx Ah Ujg Power consumption: 2,2 kW Dimensions (LxWxH): 1800 x 750 x 1350 mm Weight: 300 kg Year: 2018

Condition: good (used), Year of construction: 1991, Offer 23199 Technical Data - For notching gas, steam, stainless steel, non-ferrous, etc. pipes to weld them together at a 90° angle. Also suitable for double corner joints. - Pipe notching sizes for Ø 27.9 – 34.8 – 42.8 mm - Ø 49.0 – 61.0 mm Hjdpfxjx E Suqj Ah Ujg - Zinc outlet notching for Ø 27.0 – 61.0 mm - Max. pipe wall thickness at 400N/mm² strength: 5 mm - Drive: 400 V / 2.2 kW - Space requirement approx.: W 1100 x H 1200 x D 650 mm - Weight approx.: 200 kg

Condition: repair required (used), Year of construction: 2014, 1 off OMS Polyurethane machine model IMPACT 100 2 off heated tanks 250 Litres each . Fitted with Promass 80 metering . 1 off Mixing head and drive unit size 200 1 off Stainless steel heated tank 1000 Litres. 4 off motor and pumps. 1 off Tool-temp heating unit . 2 off control unit and frame work . Hedpfx Ahjxmvtdo Uog Can be loaded , The buyer is responsible for transport

Condition: excellent (used), Year of construction: 2008, This Haul-off saw from our renowned brand SICA S.p.a. is in machine storage at Plastima Used Machinery. The saw is from 2008 and is in used but good condition. Brand: SICA S.p.A. Type: TRS/SY 32-250 C 2000 Hjdjtpg Avspfx Ah Ujg Serial number: 0817501 Year of construction: 2008 Voltage: 400 V Power: 6 kW Pipe diameter max. 32 - 250 Ø (mm)

Condition: used, Marel M Series 3000 Hjdjxtfvhopfx Ah Ujg

Condition: used, Year of construction: 2002, total length: 2,600 mm, total width: 1,000 mm, total height: 1,600 mm, overall weight: 700 kg, space requirement width: 1,000 mm, space requirement height: 1,600 mm, space requirement length: 2,600 mm, power: 6.5 kW (8.84 HP), No. 04503 Edge processing machine Rehnen KBA Used, year of construction 2002 The machine has been designed for sanding edges, milling profiles and sanding profiles in a throughfeed process. The materials to be processed are solid wood, chipboard and MDF. Material thickness 10 - 65 mm Material length min. 50 mm Material width min. 60 mm Feed speed 8 m/min Total power 6.5 kW Equipment: - Oscillating edge sanding unit Sanding belt dimensions 150 x 1500 mm Oscillation path 30 mm Contact roller and sanding pad - Milling unit top - Milling unit bottom - Profile sanding unit top Hodpfexzu Iisx Ah Uog Incl. technical documentation Transport dimensions approx. 2600 x 1000 x 1600 mm LWH Weight approx. 700 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: good (used), Systemate D90 Drum / Thigh Deboner Systemate thigh deboner D90 debones thighs and drumsticks with optimum performance, delivering maximum profitability. D90 thigh deboner is regarded as the industry benchmark for delivering highly efficient production of deboned thigh and drumstick meat. The system is characterized by its simplicity of operation and unsurpassed yield prior to and post trim. Operation One or two operator loads the thigh or drumstick into a the product holder which carries it through a sequence of deboning steps integrated into the carousel mechanism: Hedpfx Ahjukd H Hj Ujg The product is positioned by the probe. The thigh joint is pushed gently through the diaphragm, while the thigh meat, including kneecap remains on the product holder. The bone is released from the diaphragm. The deboned thigh meat, with or without skin, is discharged on a separate location. After deboning, the only remaining operations necessary are trimming and grading. The D90 thigh deboner can mechanically debone anatomical thighs at a maximum capacity of 5.400 products per hour. The thighs are supplied to the stand alone machine by using e.g. a belt conveyor. Year: 1996 Capacity: Up to 5.400 bph Machinedimensions (LxWxH): 290x130x200 cm

Condition: used, Strip Straightening Machine for Coil Material WANZKE Type RG 400-7 Coil Processing Line REF No.: 1349-6 Year of manufacture: 1983 Nominal strip width: 400 mm Roll width: 408 mm Strip thickness: max. 2 mm Strip cross-section: max. 600 mm² Roll width, straightening rollers: 408 mm Number of straightening rollers (top): 3 (non-driven) Number of straightening rollers (bottom): 4 (driven) Hedpfoxw Rcusx Ah Ujg Straightening roller diameter: 50 mm Feed rollers: 2 pcs, Ø 50 mm (lower roller driven) Feed roller width (top): 390 mm Feed roller width (bottom): 408 mm Strip speed: approx. 5 - 45 m/min Motor power: 1.1 kW Power supply: 230 Volt, 50 Hz - Infinitely variable straightening speed via DC motor with DC controller - Drive via geared motor with chain drive - Loop control with speed regulation with 2 speed stages - Upper roller frame adjustable via 4 handwheels - 4 dial gauges for fine adjustment - Mechanical opening of the upper rollers via eccentric lever - Adjustable lateral strip guide at the infeed side - 2 roller baskets for strip guidance - Electrical diagram available Space required by straightener with control unit (L x W x H): 1200 x 800 x 1600 mm Weight: 620 kg Good condition

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 22710, total width: 1,350 mm, total length: 3,300 mm, total height: 2,150 mm, water tank capacity: 50 l, type of input current: three-phase, 1 off OMS Polyurethane machine model “ IMPACT 100 R 1;1 Tank A and B 50 Litres each . Fitted with Promass 80 metering . Ratio min 19 l/min max 110 l/min. Loading pumps. Chiller unit . Just serviced ready to plug and go…….. Hjdpfx Aoxmbkbsh Uog Can be loaded , The buyer is responsible for transport .

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Glass GbmH mixer marinator for delicate food products, with manual tilting and multi-functional control display. Fitted on mobile frame. Suitable for semi-solid, powdery and liquid products. Model / Type - VSM 150. Serial number - 4174 Date of manufacture - 2019. Hodpfxjvuhiqj Ah Usg Capacity - 150 litres. Electric supply - 400 V / 50 hz / 3 phase. Power - 16 Amps.

Condition: ready for operation (used), BJZ NTM 300 NSL Depaneling Machine Maximum cutting length: 300 mm Hedpfx Ahsx Hv Hys Usg Weight: approx. 110 kg Operating pressure: 6 bar You are welcome to come by for an inspection. We can also arrange affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our shop and check out our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data deviations and errors in the item description may occur and are subject to change.

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: S20185, The DMK 20 C2 table cutter is NEW, UNUSED STOCK. Due to its compact, robust, and precise construction, it is the ideal table cutter for small to medium-sized meat processing companies, high-end gastronomy, as well as large kitchens and catering services. The well-thought-out design gives the user virtually unlimited application possibilities in all areas. The machine is equipped with two independently operated, powerful motors, allowing for versatile control. The optionally available robust, mobile base frame ensures the mobility you need. The net weight of 260 kg speaks for itself—an absolute professional-grade machine! A bargain for the expert! You will receive an invoice with VAT shown separately. Our used equipment service for you: • 6-month warranty on all electrical parts • High-quality branded appliances at fair prices • Professional overhaul/inspection & expert cleaning • Tested & fully functional—or your money back • Shipping or self-collection—flexible options • Competent advice—before and after purchase • Provision of operating manuals, wiring diagrams & spare parts • Inspection according to DGUV V3 Professional engineering in the tightest space: The DMK 20 C2 table cutter impresses with its extremely smooth and low-vibration operation, even at high speeds. The complex manufacturing of the individual components is carefully and precisely matched. The thick-walled, high-grade stainless steel cutting bowl offers extremely accurate concentricity, allowing the cutter knives to be set very close to the bowl radius. Applications: Machine specifications: • All stainless steel construction • Solid cast stainless steel bowl (bowl capacity: 20L) • High-precision, maintenance-free cutting unit • Stainless steel knife head with 6 knives • Tight cutting clearance in the bowl radius • High stability • Extremely low-vibration operation • Vibration-damping machine feet • Cutter lid made of Plexiglas Hsdpfx Ahjw N Ipko Uog • Analog, easily readable thermometer • 6 stainless steel knives, 7 stainless steel filler rings, two bowls Drive & control: • Separate knife shaft drive with electromagnetic brake • Brake release function via push button for cleaning with lid open • Separate bowl drive with directly flanged, maintenance-free gearbox • Two speeds, independently switchable • User-friendly, large push buttons with hygienic protective covers Safety features: • Spill guard according to UVV • Interlock guard according to UVV • Noise protection lid • Electromagnetic brake • EMERGENCY STOP function • Machine meets HACCP • Machine meets UVV • BG certified Technical data: • Bowl volume: 20L • Useful capacity for fine sausage meat (approx. kg): 16kg • Number of knives: 6 • Speed (rpm): 1500/3000 • Knife shaft power (kW): 3.3/4.5 • Mains voltage (V): 400 • Control voltage (V): 24 • Fuse protection (A): 16 (slow-blow) • Dimensions (W x D x H): 83cm x 80cm x 63cm • Weight: 260 kg Options: • Mobile base frame • Serial number: S20185 • Year of manufacture: 2022 • Type: DMK 20 C2 Condition: New

Condition: good (used), Sepamatic DMS400 mixer Brand: Sepamatic Model: DMS400 Capacity: 200 liter Hjdjmidtnspfx Ah Uog Power: 380V / 0.75kW / 50Hz Machine Dimensions (LxWxH): 2.300x850x2.300 mm Machine Weight: 350 kg.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 1 x N&N Nadratowski / Orbmix twin-shaft mixer grinder with tote bin tipper/column loader. Supplied with various hole plates. Suitable for a variety of products including meat, poultry, fish, vegetables, petfood, sandwich fillings, etc. Model - MG-450/160. Hjdpfxswplc Ae Ah Usg Date of manufacture - 2011. Mixing capacity - 450 litres (approx 350 litres of product). Output - up to 2,000 kg/h, depending on product. Electric supply - 400 V / 50 hz / 3 phase. Power - 24 kW. Weight - 1530 kg (mixer grinder) and 282 kg (column loader). Previous use - for mixing and grinding a poultry and vegetable mixed product.

Condition: ready for operation (used), BJZ NTM 300 NSL Depaneling Machine Maximum cutting length: 300 mm Weight: approx. 110 kg Operating pressure: 6 bar You are welcome to come by for an inspection. We can also arrange affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Hsdpfx Ahox Hvw Ej Usg Visit our shop and check out our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data deviations and errors in the item description may occur and are subject to change.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, REF: MM6191 1 x Kolbe mixer grinder, fitted with Enterprise E52 cutting system and 5mm hole plate. Technical specification ⚙️ 🟢 Manufacturer - Kolbe. 🟢 Model - MWE-52. 🟢 Serial number - 126 0772. 🟢 Date of manufacture - 2008. 🟢 Hopper volume - 120 litres. 🟢 Grinding / mincing output - 1,700 kg / hour, depending on product and hole plates.  🟢 Electrical requirements - 400 V / 50 hz / 3 phase.  🟢 Housing outlet height - 500mm. 🟢 Overall dimensions - 1400mm long/deep x 770mm wide x 1310mm high. General machine overview ℹ️ The Kolbe MWE-52 is a robust and powerful industrial mixer grinder, designed for high-volume meat processing. This machine is an essential piece of equipment for butchers, supermarkets, and food production facilities that require efficient and hygienic grinding and mincing. Key Features & Benefits ✅ 🟢 High Output: With a significant grinding capacity of up to 1,700 kg per hour, this mixer grinder is built to handle demanding production schedules, ensuring high throughput and efficiency. 🟢 Large Mixing Capacity: The 120-litre mixing bowl allows for the thorough and uniform blending of meat, spices, and other ingredients before grinding, guaranteeing product consistency. 🟢 Durable and Hygienic: As a Kolbe machine, it is constructed from high-quality materials (typically stainless steel) that are easy to clean and built to meet the stringent hygiene standards of the food industry. Hedpoxdb Eaefx Ah Usg 🟢 Versatile Grinding: Supplied with a 5mm hole plate, it is well-suited for a variety of grinding applications. The machine can be adapted with different plates to achieve various coarseness levels. 🟢 Industrial Power: The machine runs on a 3-phase electric supply, providing the necessary power and reliability for continuous, heavy-duty operation. 🟢 Compact Design: With overall dimensions of 1400mm long x 770mm wide x 1310mm high, it offers a substantial capacity in a relatively compact footprint, making it a practical fit for various production layouts.