Used Piston Press for sale (13,821)

Condition: used, Year of construction: 2017, Used 3-meter press brake from Safan Lrodpfx Afszh Ibvewor Type: E Brake 100 3100 Capacity: 3100 x 100 tons Y1, Y2, X, Xdelta, R, Z1, and Z2 are CNC-controlled E Control Hydraulic WILA top clamping system 1 set of complete tooling Year of manufacture: 2017

Condition: new, pressure 28.0 t throat 225 mm stroke 150 mm table surface area 325 x 300 mm work speed 2.0 - 9.8 mm/sek return speed 12.8 mm/sek total power requirement 4.0 kW Ledpfjzkl Hujx Afwsrr weight of the machine ca. 650 kg dimensions of the machine ca. 1800 x 900 x 2000 mm - NC control to adjust the piston stroke - Selector switch for manual or semi-automatic operation - Flow control valve and pressure control valve - Integrated pressure gauge - Various tools can be installed on the piston - inside There is a 40 mm hole for attaching the tools

Condition: good (used), Year of construction: 2012, functionality: fully functional, Bale press Dixi 60 SLD, year of manufacture 2012 Manufacturer: Dixi Type: Dixi 60 SLD Year of manufacture: 2012 Drive power: 7.5 kW, 400 V / 16.5 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Ledpfszk A Rdjx Afwerr Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Material: Paper, cardboard, film Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: used, Year of construction: 2008, Overview This NIKO VP11e is a horizontal pneumatic (membrane) press for whole or destemmed grapes, built in 2008 by NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia). The press is made entirely of stainless steel and runs a fully automatic, multi-stage pressing program once started: grapes are loaded through the two perforated cylinder doors or axially, an internal membrane inflates against the load to extract juice at progressively increasing pressure, and the cylinder rotates between stages to break up ("crumble") the pressed cake ahead of the next drain cycle. Juice drains into a wheeled collection pan under the cylinder with a pump connection; pomace is discharged by rotating the open door face-down over the pan. The press is mounted on castors for repositioning and remains still installed and under power at the seller's winery in Spain. It can be inspected in operation on request. Technical data - Manufacturer: NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia) Lrjdpfx Ajzk Eqmefwor - Model: VP11e - Year of manufacture: 2008 - Machine type: horizontal pneumatic (membrane) press for grapes, mobile on castors - Cylinder volume: 1,100 L (cylinder Ø 920 mm) - Juice drainage pan (tina) volume: 450 L - Loading doors: 2, 640 x 420 mm each - Max. working pressure: 1.7 bar - automatic multi-stage program (pre-press 0.3 bar, then 0.8 / 1.2 / 1.7 bar for whole white grapes; 0.3 bar, then 0.8 / 1.2 bar for destemmed, fermented red grapes) - Integrated blower for membrane aspiration: -0.2 bar vacuum / +0.2 bar pressure - Power: 2.9 kW, single-phase 230 V (1/N/PE), 50 Hz - Mechanical protection: IP55 - Noise level: < 75 dB - Dimensions: approx. 2,520 x 1,270 x H 1,560 mm (with axial loading extension; 2,350 mm long without it) - Weight: approx. 430 kg Equipment - Pneumatic membrane pressing cylinder with integrated aspiration blower - Wheeled juice drainage pan with pump connection - Electric control panel with automatic pressing programs (incl. draining cycle) - Axial loading option - Safety guard on drive elements, door interlock switch and STOP switch - OEM operating manual (Spanish) Condition Used - still installed and under power at the seller's winery. No further condition report has been provided by the seller; the machine can be inspected in operation on site. Availability Immediately. Location: Spain. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 1301, power: 11 kW (14.96 HP), pressing force: 150 t, stroke length: 200 mm, table width: 100 mm, clearance between the columns: 400 mm, total length: 5,200 mm, total width: 1,730 mm, total height: 3,240 mm, overall weight: 10,500 kg, Equipment: CE marking, Adjustable sheet metal support arms, front side Parking station for sheet metal support arms, left side WILA crowning system Under power Max. bending length: 3100 mm Distance between uprights: 2550 mm Max. pressing force: 150 tons Distance to table mount: 590 mm Max. stroke: 200 mm Table width: 100 mm Upright overhang: 400 mm Descent speed: 300 mm/min Working speed: 10 mm/min Return speed: 120 mm/min X-axis range: 0 - 1000 mm Number of controlled axes: 6 Crowning: Yes Power: 11 kW Length: 5200 mm Lrsdpfx Aszl Ahrefwor Width: 1730 mm Height: 3240 mm Weight: 10500 kg

Condition: good (used), Year of construction: 2020, functionality: fully functional, Horizontal baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2020 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2020 Drive power: 11 kW, 400 V / 21 A Ljdpfsziy Dfjx Afworr Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. The operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. The offer is subject to change, prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 33407, functionality: fully functional, power: 37 kW (50.31 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 220 t, stroke length: 300 mm, operating speed: 21 mm/s, reverse speed: 200 mm/s, table length: 3,050 mm, throat depth: 400 mm, ram plate length: 3,000 mm, distance table to ram: 570 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, total length: 5,700 mm, total width: 2,100 mm, total height: 3,685 mm, overall weight: 14,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Technical specifications Force: 2200 kN Working length: 3000 mm Distance between uprights: 2600 mm Stroke: 300 mm Distance table – ram: 570 mm Lodpezkxqmsfx Afwerr Gap: 400 mm Turbo PP5400 Approach speed: 120 mm/s Working speed: 21 mm/s Return speed: 200 mm/s Weight: 13500 kg Motor: 37 kW Oil: 350 L Weight: 14500 kg LxWxH: 5700 x 2100 x 3685 mm Table: PP8170 V-axis  EFL 130 PP8303 Upgrade 2026  Top tool clamping: PP3090 – Wila  Hydraulic top tool clamping: PP3100  PP3160 hydraulic clamping V-dies  Back gauge: PP8251 XRZ modules: X1000  Security; CE: PP3580 – lasersafe  PP8402 T1 T2

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 34435, functionality: fully functional, power: 37 kW (50.31 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, pressing force: 170 t, stroke length: 200 mm, operating speed: 21 mm/s, reverse speed: 180 mm/s, table width: 120 mm, table length: 3,050 mm, table height: 970 mm, throat depth: 405 mm, ram plate length: 3,050 mm, distance table to ram: 400 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, total length: 4,945 mm, total width: 2,000 mm, total height: 2,995 mm, overall weight: 11,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake LVD EASYFORM 170/30 Touch-B Year of manufacture: 2012 Serial number: 34435 Lsdpfx Aezk H A Dsfwerr Technical specifications Force: 1700 kN Working length: 3000 mm Distance between uprights: 2600 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 405 mm Turbo: PP5400 Approach speed: 128 mm/s Working speed: 22 mm/s Return speed: 200 mm/s Weight: 11500 kg Motor: 37 kW Oil: 350 L Weight: 11500 kg LxWxH: 4945 x 22000 x 2995 mm COMMAND CONTROL TOUCH-B – • Table PP8170 V-axis • EFL 90 • Top tool clamping PP3090 – Wila • Hydraulic top tool clamping PP3100 • PP3160 hydraulic clamping V-dies • Back gauge X R Z1 Z2 X’ • Safety: CE PP3580 – lasersafe • 2 supports, front

Condition: good (used), Year of construction: 2001, For sale is a TOX Pressotechnik press, model MBG 004.124. The machine features a pressing force of 40 kN (equivalent to approximately 4 tonnes) and is suitable for industrial press-fitting, joining, assembly, riveting, embossing, and staking operations. A key highlight is its current certification status: The machine remains certified until April 2027. Technical Data Manufacturer: TOX Pressotechnik Type: MBG 004.124 Product Type: Press / Press-fit machine / Joining machine Lredpfx Afjznkvpswer Pressing force: 40 kN Maximum air pressure: 5 bar Total stroke: 200 mm Power stroke: 80 mm Year of manufacture: 2001 Machine serial number: 210192.1 Machine/Electrical number: 210193.1 Nominal voltage: 230 V AC Control voltage: 24 V DC Frequency: 50 Hz Power: 0.2 kW Rated current: 0.5 A Back-up fuse: 16 A Protection class: IP65 Standard: DIN EN 60204 Circuit diagram: STE 325-26 Country of manufacture: Germany Certification valid until: 04/2027 Condition: Used The press operates with a total stroke of 200 mm. The actual power stroke is 80 mm, delivering a maximum pressing force of 40 kN. The machine is suitable for tasks such as press-fitting bushings, bearings, and pins, as well as for assembly, riveting, embossing, staking, and joining operations. Please refer to the images for the exact condition and scope of delivery. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find additional presses and industrial machines—both new and used—in our shop! PD

Condition: good (used), pressure 250 t passage width 700 mm stroke 850 mm table surface area 2000 x 1000 mm mould height - Max./min. 355 / 1200 mm total power requirement 30 kW weight of the machine ca. 25 t Lsdpoxcblwjfx Afwerr dimensions of the machine ca. 4,2 x 2,1 x 5,5 m

Condition: good (used), Year of construction: 1981, pressure 300 t Lodpsx Uru Nefx Afwsrr passage width 1100 mm stroke 950 mm table width 1050 mm table depth 1200 mm dayligth 1180 mm weight of the machine ca. 20 t dimensions of the machine ca. 2,8 x 3 x 4,5 m

Condition: excellent (used), 4-axis hydraulic CNC press brake with HACO-Robosoft ATS 590 Graphic control (modernized in 2008) and CE conformity. Pressing force: 135 t Bending length: 4000 mm Dimensions L x W x H: approx. 4500 x 1600 x 2320 mm Weight: 10500 kg Accessories / Special features: • 4-axis CNC control HACO ATS 590 Graphic Y1 + Y2, X, R for bending depth, back gauge, and top/middle/bottom gauge fingers • The gauge fingers are adjusted manually, moving them together/apart • Graphical programming and display • CE conformity through 1 working speed • Hydraulic synchronized control • Manual table crowning by adjustment via hand crank under the die with SIKO counter • Split upper tooling, as new • Continuous universal die with 4 different V-openings up to max. V = 40 mm, as new • Split additional upper and lower tooling • Collecting rail • Tooling system "PROMECAM" • 2 pcs. support arms • Fast, precise and easy to adjust • Foot switch and emergency stop Ledpfx Asx Npiyjfwsrr • Electrically secured safety doors (right, left, and rear) • 1 working speed, rapid return • CE conformity UVV valid until 04/2027 Delivery time: immediately from stock in Dortmund, free loading onto a truck Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 1999, functionality: fully functional, For sale: High-performance mechanical stamping and forming press, ARISA brand, model S-2-400-240-FS, with a force of 400 tons (4,000 kN), year 1999. This high-precision industrial machine is ideal for stamping, cutting, and combined stamping/cutting operations for industrial series production (automotive, household appliances, precision sheet metal work). Here are the complete technical specifications: General Information: - Brand/Manufacturer: ARISA S.A. (Spain) - Model: S-2-400-240-FS (S Series) - Manufacturing No.: 400365704 - Certification: CE Type Examination No. 0070 090C 0088 09 95 (INRS) - Total weight: 66,000 kg (66 tons) Capacities & Performance: - Rated force: 4,000 kN (400 tons) at 7 mm from the force point - Slide stroke: 25 - 250 mm - Closed height: 600 mm - Slide adjustment: 150 mm - Stroke rate: 25 - 100 strokes/min - Maximum flywheel speed: 500 rpm - Normal stop: Top Dead Center (TDC) - Time to reach safety distance: 0.126 s Lsdpfszpz Dmsx Afwerr Dimensions & Tools: - Maximum dimensions of the upper tool (L x W): 2,300 × 960 mm - Maximum weight of the upper tool: 5,700 kg Power & Energy: - Installed power: 65 kW - Power supply: 380-500 V / 50 Hz (Three-phase, connection cable section 3.5 x 50 mm²) - Pneumatic pressure: 6 - 1 bar - Hydraulic pressure: 270 bar - Clutch-brake couplings: 30 cycles/min (Minimum-maximum pressure: 59 - 67 bar) Included Equipment: - Damping cushion / upper pneumatic cylinders - Front transparent protective screens and side safety grilles - Mobile control panel on wheels and emergency stop panels - Part/scrap discharge conveyor - High-rigidity column frame Do not hesitate to contact us for further information or to request a quote.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Rotex Air Lite V3 IVM” textile press Item for sale: 1x Rotex Air Lite V3 IVM Condition: This offer is for a used device, which may show signs of wear (minor scratches or discoloration). The unit has been tested to ensure it is in working order. Lrodpezpw E Hsfx Afwer Packaging and Shipping: You are welcome to inspect the unit during our business hours. Please schedule an appointment to do so! Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we will record a video of a functional test for you. For more information, please feel free to contact us directly.

Condition: used, functionality: unexamined, Due to warehouse clearance, we are selling a total of 12-15 used machines/presses/workshop presses (see pictures, including those from Bosch). Lodpozqtzmofx Afworr The machines are mounted on sturdy base frames/tables and are ideal for workshops, production, hobbyists, or for obtaining spare parts. Individual price: €60 per machine. Package price: If you purchase all 7 machines, you will receive an attractive package price! Condition: Used, as shown in the pictures (see photos). Upon request, transport and loading can be arranged for an additional fee, and we can organize transport throughout Europe. Prices exclude VAT. Inspection is possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange is possible! Machine purchase and sale WE BUY/SELL PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website.

Year of construction: 1992, condition: used, machine/vehicle number: 1784, ITEK Graphix 985CF / Ryobi 3202MCS – 2-colour continuous forms offset press Year: 1992 Condition: used Price: €3,250 excluding VAT Delivery terms: EXW Son en Breugel, the Netherlands ITEK Graphix 985CF, the ITEK version of the Ryobi 3202MCS, 2-colour offset press for printing continuous stationery and fanfold forms. The machine is equipped with tractor feed and pack-to-pack delivery. The press comes from a small printing company which ceased its activities due to serious health problems of the owner. The machine was mainly used for single-colour printing. After arrival at our warehouse, the machine was thoroughly cleaned. The machine runs and turns mechanically, but it has not printed again after cleaning. Therefore, no recent print test is available. The electronic counter is currently not working because its internal battery is exhausted. The total impression count is therefore unknown. Technical specifications * Number of colours: 2 * Application: continuous stationery / fanfold forms * Feeding system: tractor feed * Delivery: pack-to-pack * Paper width: approximately 127–356 mm / 5–14 inches * Form length: approximately 178–356 mm / 7–14 inches * Length adjustment: in increments of 1/6 inch * Maximum printing size: approximately 330 × 355.6 mm * Paper thickness: approximately 0.06–0.20 mm * Production speed: approximately 4,000–6,000 forms per hour * Dampening system: molleton * Electrical supply: 230 V, single phase, 50 Hz * Power consumption: approximately 550 W * Dimensions: approximately 1,500 × 900 × 1,410 mm * Weight: approximately 550 kg Included * Original Ryobi operating manual * Original Ryobi parts catalogue * Safety documentation * Various loose rollers Lrjdpezqhgdofx Afwer * Additional trays, shafts, rods and tools * Other accessories shown in the photographs The machine is offered in its present condition and can be inspected by appointment in Son en Breugel, the Netherlands.

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 24619, functionality: fully functional, operating hours: 2,442 h, power: 15.8 kW (21.48 HP), pressing force: 120 t, stroke length: 260 mm, controller model: Delem DA-66T, working width: 3,100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 120 t Max. working width: 3,100 mm Frame spacing: 2,550 mm Rear gauge depth: 750 mm Max. stroke: 260 mm Number of axes: 6 (Y1+Y2+X+R+Z1+Z2) MACHINE DETAILS Power: 15.8 kW Drive system: CNC Control: Delem DA-66T Dimensions & Weight Dimensions (L x W x H): 4,100 x 2,000 x 2,700 mm Weight: 8,500 kg Operating hours: 2,442 h Lrsdpfx Afozk Dy Tswor EQUIPMENT Finger guard Tools included Crowning system: CNC-controlled Punch holder: Standard Tool holder type: European style

Condition: ready for operation (used), Year of construction: 2022, Hongming HM-950 continuous roller pressing and flattening machine, suitable for the production of hard covers, book covers, folders, presentation materials, rigid boxes, and other glued cardboard or paper products. The machine continuously feeds the material through a large pressure roller via a conveyor belt. This ensures an even pressing result, improves adhesion between the glued layers, and helps to remove trapped air bubbles and irregularities. The pressure and working height can be adjusted manually on both sides of the machine. Technical specifications: * Manufacturer: Hongming * Model: HM-950 * Machine type: Roller pressing and flattening machine * Year of manufacture: June 2022 * Working width: Approx. 950 mm * Serial number: J01010089-0026 Lrjdpjzq Tz Tjfx Afwjr * Voltage: 380 V * Frequency: 50 Hz * Current: 3.4 A * Motor power: 0.75 kW * Power supply: 3-phase * CE marked Suitable for: * Hard-cover production * Bookbinding and book-cover production * Rigid-box and luxury-box components * Greyboard with glued covering paper * Folders and presentation covers * Cardboard and paper converting * Pressing and smoothing of glued materials Condition and equipment: The machine is in clean overall condition and appears complete. It is equipped with a continuous conveyor belt and a large covered pressure roller. The original English-language operating manual is included. Inspection is possible by appointment.

Condition: used, Safan 120-4300 TS-1 CNC Pressbrake Year 2004 Pressing Force 120 Ton Bending Length 4,300 mm Distance between Uprights 3,600 – 3,700 mm Lodpfxezdgnbj Afwjrr Maximum Stroke 180 mm Open Height (Table to Ram) 510 mm Throat Depth 400 mm Table Width 160 mm Main Motor Power 7.5 kW Control System Safan TS-1 CNC Number of Controlled Axes Typically 4 Axis (Y1, Y2, X, R) Electrical Supply 400V / 3 Phase Machine Weight Approx. 11,700 – 12,300 kg Machine Dimensions (L × W × H) Approx. 4,500 × 1,650 × 2,900 mm

Condition: good (used), Year of construction: 2014, pressing force: 100 t, table length: 3,050 mm, clearance between the columns: 2,550 mm, overall weight: 7,700 kg, Press force: 100 t Lodpfxsztakgj Afwsrr Bending length: 3050 mm Frame width: 2550 mm Total power requirement: 20 kW Machine weight approx.: 7,700 kg Accessories/Equipment: - Light curtain in front of the machine - Tools - 2 stop fingers - DELEM DA 60 touch control - Foot switch

Condition: used, Münch RMP 660 pellet press for the production of wood pellets and biomass pellets from sawdust, wood shavings and other organic waste materials. The machine is suitable for industrial pellet production, offering high pressing capacity and consistent pellet quality. Ideal for wood processors, sawmills and biomass plants. Lsdpfx Afezryyroworr Technical data: - Screen: 6 mm - Motor: 2 x 90 kW - Inner diameter of die: approx. 660 mm - Number of press rollers: 2 - Pressing capacity: up to approx. 3–5 t/h

Condition: used, Year of construction: 2022, total length: 5,020 mm, total width: 2,150 mm, total height: 2,680 mm, Colour: White Weight: 9.100 kg Price: On request - Year: 2022 - Documentation available: Yes - └ Type Documentation: Operating system, User manual, Electrical diagrams - CE marking present: Yes - CE certificate present: No - Serial number: 00030430-ERH Lredpfezkki Usx Afwsr - Drive system: CNC - Power [kW]: 15.0 - Press force [ton]: 175 - Max. working width [mm]: 3100 - Column gap [mm]: 2550 - Backgauge depth [mm]: 750 - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 5025mm x 2150mm x 2680mm (l x w x h) - Transport weight [kg]: 9100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2026, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € Lodpegl Nlmefx Afwsrr (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: as good as new (ex-display), Year of construction: 2023, pressure 80.0 t stroke 250 mm table surface area 1040 x 260 mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 5.5 kW weight of the machine ca. 835 kg. dimensions of the machine ca. 1810 x 700 x 2100 mm Exhibition machine from 2023 with only approx. 2x operating hours condition like NEW special price on request Equipment: - robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts etc., but also for pressing in and pressing out bolts, bearings, bushes etc. Lredpfxsw U U Svj Afwjr - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Including round steel chain and 2x locking bolts * Piston rod with metric mount - 1x set of V-block prism support - Pressure gauge for pressure display - Simple manual operation with : * 1x feed speed * 1x working speed * 1x retraction speed - piston can be stopped in any position - Hydraulic tank permanently mounted on the side - operating instructions

Condition: new, pressure 30.0 t stroke 200 mm table surface area 775 x 190 mm column travel between the guideways 775 mm ajustment speed 7.5 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 3.0 kW weight of the machine ca. 400 kg. dimensions of the machine ca. 1.500 x 700 x 1.800 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., . but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: Lrjdpfx Aexaayhjfwer * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions