Used Placke Press Brake for sale (9)

Condition: like new (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: P 648, control type: CNC control, oil tank capacity: 290 l, overall weight: 9,500 kg, power: 11 kW (14.96 HP), Built for a globally leading cooperation partner. Last machine from the pool. Machine is as good as new. The High Quality Press Brake (HQPB) is the top model among Placke press brakes. The entire manufacturing process, from the hydraulic cylinder to electrical cabinet construction, is carried out in-house. By combining state-of-the-art technology with decades of experience in forming technology, the HQPB series allows you to perform bending at the highest level. The standard configuration already provides a fully functional press brake. With this package of safety, reliability, and efficiency—paired with user-friendly operation—we are able to meet the highest demands and precision requirements in the bending process. Machine Frame: Hsdpfxew Nhhgs Aacsw - Base machine constructed from steel S 355 N - Side frames welded with 2 pressure pipes and top-mounted oil tank - Above-floor design - Coating (2-component textured paint), light grey (RAL 7035) and signal grey (RAL 7004) Upper Beam: - Press beam stress-relieved annealed - Depth penetration measurement, reader head guided by ball roller guide - Separate Y1 and Y2 control, electrical angular misalignment monitoring Hydraulic System: - Hydraulic proportional control valve system with electronically monitored cylinder parallelism - Solid steel cylinder with inductively hardened piston rod - Low-noise internal gear pump Punch Clamping: - Upper tool holder system WILA, hydraulic clamping system, type NSCL-II-HC, fully hardened, max load: head bearing = 250 t/m, shoulder bearing = 300 t/m Lower Beam: - Narrow table incl. manual clamping bar, dimensions: 95 mm high, 95 mm wide - Centrally adjustable crowning system, WILA system, CNC controlled, NSCR-I-MC. Two mechanically adjustable wedge bars compensate for deflection - Single-V die holder (13x20) - Working height: 1050 mm (with 55 mm tool height) Front Side of the Machine: 2 aluminum support arms in the front, approx. 600 mm long, incl. 2 tilting stops, measuring tape, and plastic wear strip. The support arms are movable on a linear ball guide and can be height adjusted for 55 mm to 100 mm high dies using a slotted hole. The linear ball guide is milled into the lower beam. Control and Regulation Technology: - Operating voltage 400V / 3Ph / 50Hz - Switching and safety components by Telemecanique - Backgauge with AC servo technology - Pilz safety PLC Backgauge "2-axis controlled": - X- and R-axes CNC controlled - Z-axis manual Delem DA 66 Touch control on swivel arm incl. Profile S-Lite offline programming software. Safety equipment according to CE standards Technical Data and Working Range: Press force: 1250 kN Working length: 3100 mm Clearance between uprights: 2600 mm Installation height: 450 mm Throat depth: 305 mm Ram stroke: 265 mm Ram Speeds: Rapid traverse max: 220 mm/s Pressing speed max: 9.8 mm/s Return speed max: 160 mm/s Ram positioning accuracy: ± 0.01 mm Ram tilt: ± 10 mm Electrically limited to ± 5 mm Lower beam height above floor: 900 mm Motor power: 11 kW Main Dimensions: Pit depth: 0 mm Side frame pit depth: 0 mm Machine weight: approx. 9.5 t Tank capacity (hydraulic oil): 290 l (Technical changes reserved) Lighting behind the machine: Workspace illumination using LED light strip between the uprights.

Condition: excellent (used), Year of construction: 2001, stroke length: 265 mm, throat depth: 330 mm, pressing force: 150 t, Hydraulic press brake Fab. Plague guy. QPB-M6 Year of manufacture 2001 Technical data Make: Placke Type: QPB-M6 Year of manufacture: 2001 Pressing force: 150 t Bending length: 3100 mm Thrust: 330 mm Push stroke: 265 mm Installation height 665 mm Connected load: 16 KW Rapid traverse 150 mm/s Working speed 9.8 mm/s Retraction 100 mm/s Operating pressure 300 bar Dimensions: L 3.4 x W 2.0 (+ support arms) x H 2.9 mm Hodpfx Asvw Trioacow Weight: 10.5 t Equipment - Control: Delem DA65 2D graphics - 4-controlled axes: X, R, Y1, Y2 - 2x support arms, can be moved sideways and in height adjustable - 2-hand control panel - Hydraulic upper and lower tool clamping - CNC-controlled crowning, WILA - Tool package: Upper tool straight, H 160mm, L = 2,700mm, sectioned Lower tool V15, L = 2,400mm, sectioned All information without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, Year of construction: 2000, pressure 60 t chamfer lenght 2050 mm distance between columns 1550 mm throat 255 mm stroke 165 mm dayligth 475 mm working feed 9,8 mm/sec return speed 117 mm/sec ajustment speed 150 mm/sec total power requirement 5,5 kW weight of the machine ca. 5000 kg dimensions of the machine ca. 2300 x 1500 x 2470 mm Equipment: - DELEM DA65 CNC control Hodpfx Aaoxrgv Hocew - Electric backgauge (X-axis), 600 mm - Hydraulic upper tool clamping - Front light barrier - Side and rear protective grilles - Manually adjustable stop bar, foldable (R+Z-axis) - Upper tool - 2x support arms - Machine feet - Operating instructions

Condition: used, Year of construction: 2004, pressure 50.0 t chamfer lenght 1275 mm distance between columns 1040 mm column arm 250 mm ram stroke speed 225 mm/sec work speed 0 - 9.8 mm/sec return speed 160 mm/sec work stroke 215 mm dayligth 512 mm table height 800 mm back stop - adjustable 600 mm control DELEM DM 51 Hodpfjxab U Hjx Aacsw operating pressure max. 300 bar oil volume 150 ltr. voltage 400 V engine output 6.0 kW Weight 4300 kg range L-W-H 1930 x 1510 x 2390 mm current new price approx. 80.000 euros special price on request good / well-maintained condition (!!) - in checked condition - machine video - ?v=5L8L2AYv0PU ----- PLACKE electro-hydraulic CNC press brake specially developed for the production of small parts The advantages: • Low energy consumption • High operating comfort • Wide range of applications • Fast, robust, low-noise • With CNC control as standard ----- Equipment: - CNC electro-hydraulic press brake with 1x working cylinder - DELEM CNC control model "DM 51" - CNC controlled axis: Y1 - Y2 - X - CNC electro-motorized back stop * Travel path: X = max. 600 mm * Travel speed X axis .. max. 300 mm/s * Positioning accuracy .. +/- 0.02 mm * with 2x manually adjustable stop fingers (R+Z axis) - WILA standard - manual upper tool clamping - WILA standard - manual lower tool clamping - PLACKE safety device at the front: light barrier - side protective device (swivel doors) - rear protective device (swivel + lockable door) - front storage area - side sorting system for bending tools - 1x freely movable foot control - original operating instructions including circuit and hydraulic diagram

Condition: new, Year of construction: 2023, pressure 150 t chamfer lenght 3100 mm distance between columns 2600 mm dayligth 450 mm throat 350 mm stroke 265 mm working feed 9,8 mm/sec Control DELEM DA 66 T total power requirement 22,5 kW weight of the machine ca. 10000 kg dimensions 4000 x 2200 x 2800 mm • Basic version as a C-frame • Compact table model • Ideal for prototypes and small series • Very short setup time • Functionally simple • Wide range of applications • Low noise level • Low energy consumption • Easy handling including special equipment: Hedpjv H Eqcjfx Aacsw - CNC control DELEM DA 41T

Condition: new, Year of construction: 2025, The EQPB BabyPress is a hydraulically operated table model with CNC control. It is a robust and low-noise machine that has been specially developed for the production of small parts. The entire production, from the hydraulic cylinder to the control cabinet construction, takes place in-house. The advantages: - Basic C-frame design - Compact table model - Ideal for prototypes and small series - Very short set-up time - Functionally simple - Wide range of applications Hedpfjglkfpox Aacow Standard basic design: - Upper cheek guide with high-precision roller guide - Mechanical tool clamping system Promecam - Narrow table with single V-tool holder (13x20) - CNC control Delem DA-41T - Y-axis CNC-controlled for programmed plunge depth calculation - X-axis CNC-controlled 170 mm traverse path - R-axis manual - low noise level - low power consumption - easy operation technical data: - pressing force 62 kN - working length 285 mm - clearance between the uprights 230 mm - Installation height 215 mm - throat 70 mm - ram stroke 100 mm Ram speeds: - Press stroke max. 9.8 mm/s - retraction max. 50 mm/s - Motor power 0,7 kW - main dimensions (WxHxD): 900 x 1.300 x 550 mm - Machine weight approx. 0,25 t - Tank capacity (hydraulic oil) 10 l Optionally, we offer this machine without CNC control and / or a press force of 12 t, just contact us.

Condition: new, Year of construction: 2025, The EQPB BabyPress is a hydraulically operated table model. It is a robust and low-noise machine, specially designed for the production of small parts. The entire production, from the hydraulic cylinder to the switch cabinet construction, takes place in-house. The advantages: - Basic version as C-frame - Compact table model - Ideal for prototypes and small series - very short set-up time - Functionally simple - Wide range of applications Standard basic version: - Upper beam guide with high-precision roller guide - Promecam mechanical tool clamping system - narrow table with single V-tool holder (13x20) - low noise level - low power usage - simple service Technical data: - pressing force 6,2 t - Working length 285 mm - Passage between the stands 230 mm - Installation height 215 mm - Throat depth 70 mm - Plunger stroke 100 mm - X-axis manually adjustable Travel range 250 mm - pressing cycle max. 9.8 mm/s Hjdpefi Tm Isfx Aacow - Retraction max. 50 mm/s - Engine power 0,7 kW - Dimensions (WxHxD) 350 x 1,075 x 390 mm - Weight approx. 0.2 t Optionally we also offer this machine with CNC control and/or a press force of 12 t, just contact us.

Condition: new, Year of construction: 2025, This handling device is suitable for safely and stably handling large-area materials with just one operator. The device can be provided as an independent unit to any machine. The price-performance ratio is impressive, as the payback period is less than one year. Comprises the following main components (also available individually): • Column stand • Pivot arm • Lifting traverse with controls Hjdpfx Aaow Nh Dzscew Technical data VT 1000: Lifting capacity: 1000 kg Max. lifting height: 1295 mm Lifting speed: 4 and 8 m/min Max. rotation radius: 3900 mm Power supply: 400 V / 50 Hz Max. product dimensions: 4000 x 2000 mm² (weight dependent) Overall height: 2990 mm Total weight: 1350 kg Alternatively, we also offer this handling device with a lifting capacity of 500 kg.

Condition: new, Year of construction: 2025, This handling device is suitable for handling large-area materials safely and stably with only one operator. The device can be added to any machine as an independent unit. Hjdpfx Aofi Trboacjw The price-performance ratio is convincing; because the payback time is less than one year. Consisting of the following main parts: (also available separately) - column stand - swivel arm - Lifting traverse with operation Technical data VT 500: Lifting capacity: 500 kg max. lifting height : 1750 mm Lifting speed : 4 and 8 m/min Max. turning radius : 3900 mm Mains connection: 400 V / 50 Hz Max. product dimensions: 4000 x 2000 mm² (depending on weight) Total height: 3580 mm Total weight: 850 kg Alternatively we offer this handling device with a lifting capacity of 1000 kg.