Used Planing Stop for sale (8,726)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x745x1100 mm Giedpfx Aevz Emyedbep Weight 580 kg Total power requirement 4 kw

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 6360.16.65, Country of manufacture: Switzerland Voltage: 380/400/50/3 Net weight: 1350 kg Customs tariff number: 8460.1920 Dimensions: 200/120/160 cm Gedpfx Aow Ucxqedbjip TECHNICAL SPECIFICATIONS Maximum saddle travel: 530 x 220 mm Maximum grinding surface: 520 x 230 mm Table clamping surface: 600 x 200 mm Table speeds Longitudinal, standard operation: 0-25 m/min With slow feed: 5/10 mm - 8 m/min Cross feed: 0-6 m/min Vertical travel by hand: 330 mm Rapid travel by motor: 290 mm Rapid feed rate: 460 mm/min Max. distance between table and spindle axis: 412 mm Vertical feed movement Handwheel, 1 division: 0.01 mm Micrometric device, 1 division: 0.001 mm Automatic: 0.001-0.099 mm With pulse button: 0.001 mm Cross feed movement Handwheel, 1 division: 0.01 mm Micrometric device: 0.001 mm Grinding wheel Diameter x width x bore: 225x25x50/51 mm Standard RPM: 2700 rpm With variable speed drive: 3700-1300 rpm All technical data are provided without guarantee and are subject to possible errors or omissions.

Condition: excellent (used), Plane cutter head (28149) Make ISCAR type F 90 A - D160-40 M Gijdpfx Aog Er H Hodbep Weight 5 kg

Condition: new, Year of construction: 2024, Automatic length measuring and positioning system for all STROMAB crosscut saws, as well as similar machines from other manufacturers. It serves both as a stop and for workpiece positioning. Consists of: Aluminium profile 105 x 90 mm, anodized Toothed belt drive 32 mm, reinforced with steel wire Stepper motor 6 Nm, multi-voltage 115 - 230 V, 50/60 Hz Repeatability +/- 0.1 mm Gsdpfxjxrauco Adboip Positioning speed 60 m/min SMART 7 Control Unit with 7-inch touch screen Absolute and incremental processing mode 8 pre-set standard values 2 software versions with different optimization levels available optionally. ZM 415 – Usable working length 4,500 mm ZA333 – Roller table 4,500 x 280 mm, RD 32 mm ZA341 – Front support 4,500 x 260 mm ZA373 – Locking cable for customer’s own crosscut saw

Condition: good (used), Duplex DD double mitre fence for Altendorf panel saws Modified for use on Altendorf panel saws with steel guide rail, from approx. year 1998 onwards. Cross-cutting up to approx. 1400 mm Digital display of angle and cutting length with automatic angle compensation eliminates the need for test cuts. The protective film shows minor damages that do not affect functionality or operation. Giodjw Nxu Dspfx Adbop Machine demonstrations can be arranged by appointment at our premises. We only offer machines that are ready for demonstration and in stock, see 'further offers from this supplier.'

Condition: used, Electrical contact length stops for Mubea and Peddinghaus in various lengths. The price is for a Mubea length stop 1000 mm. Giodpof Srn Rjfx Adbep

Condition: new, impact length 5000 mm Weight of Material maxium 300 Kg/m Wheel width 350 mm roll diameter 60 mm work height adjustable 840 - 950 mm weight 172 kg Gsdpfx Ajvkiv Djdbsip length in width 620 mm length in total 5400 mm Roller conveyors including stop system. Stable execution. are available from 2 to 6 meters in length.

Condition: new, measuring length bis 4000 mm Tube length 4280 mm numbers of toolholders 5 Rohr Edelstahl dimensions 4,3 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. The magnifying glass with 6x magnification makes it easier to adjust the settings precisely Godevkiwujpfx Adbjip desired length. Danger: This is just the stop system without roller conveyor!

Condition: new, measuring length bis 5000 mm Tube length 5280 mm numbers of toolholders 6 Rohr Edelstahl dimensions 5,3 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller Giedpfx Aovkiwhjdbop conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. The magnifying glass with 6x magnification makes it easier to adjust the settings precisely desired length. Danger: This is just the stop system without roller conveyor!

Condition: new, measuring length bis 3000 mm Tube length 3280 mm numbers of toolholders 4 Rohr galvanisch Verzinkt Gijdpfsvkiwnsx Adbep dimensions 3,3 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. The magnifying glass with 6x magnification makes it easier to adjust the settings precisely desired length. Danger: This is just the stop system without roller conveyor!

Condition: new, impact length 2000 mm Weight of Material maxium 300 Kg/m Wheel width 350 mm roll diameter 60 mm work height adjustable 840 - 950 mm Gisdpfxovkiw Io Adbep weight 73 kg length in width 620 mm length in total 2400 mm Roller conveyors including stop system. Stable execution. are available from 2 to 6 meters in length.

Condition: new, impact length 3000 mm Weight of Material maxium 300 Kg/m Wheel width 350 mm roll diameter 60 mm work height adjustable 840 - 950 mm weight 117 kg length in width 620 mm length in total 3400 mm Roller conveyors including stop system. Stable execution. Giedovkivqspfx Adbjp are available from 2 to 6 meters in length.

Condition: new, impact length 4000 mm Gjdpfx Aevkiv Rsdbjip Weight of Material maxium 300 Kg/m Wheel width 350 mm roll diameter 60 mm work height adjustable 840 - 950 mm weight 137 kg length in width 620 mm length in total 4400 mm Roller conveyors including stop system. Stable execution. are available from 2 to 6 meters in length.

Condition: new, measuring length bis 2000 mm Tube length 2280 mm numbers of toolholders 3 Rohr galvanisch Verzinkt dimensions 2,3 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. Gijdpfx Adjvkiwzsbsp The magnifying glass with 6x magnification makes it easier to adjust the settings precisely desired length. Danger: This is just the stop system without roller conveyor!

Condition: new, impact length 6000 mm Weight of Material maxium 300 Kg/m Wheel width 350 mm roll diameter 60 mm work height adjustable 840 - 950 mm weight 195 kg length in width 620 mm length in total 6400 mm Roller conveyors including stop system. Gjdpevkivwofx Adbjip Stable execution. are available from 2 to 6 meters in length.

Condition: new, 2000 mm Working width 360 mm Wheel width 360 mm roll diameter 60 mm 800 kg height adjustment 650 - 950 mm weight of the machine ca. 0,045 t dimensions 2,07 x 0,48 x 0,21 m Gijdpfx Adeupxuijbop Simple roller conveyor with 2000mm length.

Condition: excellent (used), Compact High Speed Planing Line Mechanisation with Stacker 1. Weinig EM814 moulder infeed with flat chain feeder 2. Weinig 820 high speed right angle moulder outfeed with cross feed sweepers 3. Weinig 811 board stacker with scissors lift (chain feed discharge options) -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). Gisdpfexb U Txsx Adbjp -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high) 3. Weinig cross chains after scissors lift to move full packs away from the stacker when full. Possible to supply with Weinig Hydromat moulders 100m/min as needed.

Condition: used, Year of construction: 1980, No. 3192 Four-sided planing machine WEINIG U 17 A Used, year of construction 1980, machine available from February 2025 Machine still in operation 6 spindles Arrangement of spindles bottom - right - left - top - bottom - bottom Working width 170 mm (with a tool flight circle of 125 mm) Working height 120 mm (with a tool flight circle of 125 mm) Joining spindle 4 HP All other spindles 5.5 HP Feed 2 or 3 HP Speed of the work spindles 6000 rpm Work spindles Ø 40 mm Gisdpjvkhccjfx Adbep Smallest flying circle Ø of the moulder spindles 100 mm Largest flying circle Ø of the moulder spindles 180 mm Continuous feed, infinitely variable 6 - 18 m/min Transport roller Ø (hardened) 140 mm Transport roller width 50 mm Adjustment range of feed table and joining ruler right 10 mm Adjustment range of vertical spindles under table 40 mm Adjustment range of the horizontal spindles (axial) 30 mm Dressing table length 2 m Sale on behalf of customer, ex location Upper Austria, without disassembly, without transport and assembly Errors in description and price excepted Disassembly, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Automatic start-stop shear manufactured by PROIN. It allows for cutting adjusted to the following specifications: - Strip width: 300 to 2050 mm - Material thickness: 2 – 10 mm Godpfx Aoxdcyledboip - Tensile strength (Rm): maximum 600 MPa - Cutting length: 400 – 1200 mm The cutting speed varies depending on the strip's thickness: - Thickness ≤ 5 mm: 36 m/min - Thickness ≥ 5 mm and ≤ 10 mm: 18 m/min Material width: 300 – 2.050 mm Material thickness: 2 - 10 mm Tensile strength (Rm): maximum 600 MPa Length: 400 – 12.000 mm

Condition: good (used), Year of construction: 2008, Mabeg Feeder Giodpfxow Eb Uaj Adbjp SPS UV2 + C: UV Drying tunnel with material cooling Automatic Stacker: SPS AUTOSTACK 2

Condition: excellent (used), functionality: fully functional, CG 3 – Holding Point Grinder for Die Cutting Tools With pneumatic drive for high traction force and a patented hold-down system. Designed for burr-free grinding of holding points while maintaining the functionality of the rubber ejection material. Giedpfjxltkqsx Adbsp The pneumatic drive uses compressed air to deliver very high and consistent traction force, available at all times without the need for charging cycles or battery changes. The fabric-reinforced compressed air hose is highly flexible. The large support surface prevents tilting during grinding, enabling the operator to grind the holding points straight and accurately in position. The depth of the holding point is precisely set using the depth adjustment. The patented hold-down system for rubber ejection and stripping materials prevents grinding into the rubber or profile. The advantage: fewer and smaller holding points are required, and the performance of the die rubbering remains intact. The holding point grinder is available in versions for corrugated and solid board. The attachments are matched to the standard widths of diamond grinding wheels for both corrugated and solid board. With diamond grinding wheels, breakers can be optimally set. Compared to stone grinding wheels, diamond wheels are extremely robust and thus more resistant to breakage. They are also more durable and sustainable. Each holding point grinder comes supplied with the correct size diamond grinding wheel for the machine. In addition to the holding point grinder, manual holding point tools are ideal for use. The chisels can enlarge the holding points after grinding if required. Two manual holding point tools are also included in the package at no extra cost. Advantages at a glance: Pneumatic drive for consistently high traction force Large support surface for straight, precise grinding of holding points Patented hold-down system for solid and corrugated board Note: The unit operates with diamond grinding wheels size 50 × 8 mm.

Condition: new, Roller conveyor with length stop Configurable in different lengths and widths. Optionally available with driven rollers, cross pusher, material chute etc. Cross cut fence manually, by means of hand crank or motorized adjustment. Gsded A Ufbopfx Adbjip Position readable via digital display. Stop fixed or hinged. Please indicate the desired length, roll width/material and height when making inquiries.

Condition: excellent (used), Year of construction: 2009, Marel scale. Type - START/STOP Scale. Year of manufacture - 2009. Conveyor dimensions - Length - 85cm. Width - 60cm. Height - 90cm. / adjustable height. 3 pcs. in stock. Gsdeh Nvd Hjpfx Adbsip Price is per piece. DANP.20.

Condition: excellent (used), Leg length: 1015 mm Stop leg length: 650 mm Material thickness: 15 mm Godpogzvuqsfx Adbeip Weight: 17 kg

Condition: used, suitable for Peddinghaus profile steel shears Gijdpfx Ajt Iyx Hedbjp useful length 2,000 mm