Used Plants for sale (3,199)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, WOLFF - Sand separation and washing plant Gsdjy N Rtyopfx Akhjkd

Condition: used, Year of construction: 2002, We are offering this used Finnsonic MC-360/III ultrasonic cleaning system, year of manufacture 2002. If you have any questions or require further information, please feel free to send us a message or give us a call. The dimensions of the individual tanks are approximately: width 750 mm x depth 600 mm x height 600 mm. Gedpsywua Tefx Akhekd

Condition: used, Year of construction: 2015, operating hours: 38,000 h, functionality: fully functional, power: 70 kW (95.17 HP), 1. HKW Kuntschar + Schlüter GTK70 (70 kW electrical, MAN E0836E engine, year of manufacture 2015, in use from Q1 2020, approx. 38,000 hours, manufacturer overhaul, regular full maintenance by the manufacturer, maintenance documentation available for inspection, fully functional, out of service since 10/12/2026. Current maintenance is pending. 2. Gas condensing boiler Wolf MGK-2-470 (~200 kW real load, max. 467 kW, approx. 11 years old), used as a peak load boiler. Gkjdpfx Asz Tdfgskhsd 3. Buffer tank approx. 8,000 liters (with insulation, approx. 11 years old). 4. Expansion tank Reflex Type N600 (600 liters): On request: Soundproof enclosure (multi-layer panels, steel frame, approx. 60 m², outdoor installation, supply/exhaust air).

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Godoz D Ihfspfx Akhskd

Condition: used, Year of construction: 2010, operating hours: 7,191 h, functionality: fully functional, machine/vehicle number: W09430219A2D38810, overall weight: 19,000 kg, We are selling our used Doppstadt shredder (year of manufacture 2010) with no warranty of any kind. The machine is ready for operation and is currently used in our facility for shredding disposable pallets and green waste. Gsdpfx Ajzv Hzwjkhskd

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2454320049, overall weight: 130 kg, total width: 660 mm, total length: 660 mm, total height: 980 mm, power: 1.5 kW (2.04 HP), input voltage: 230 V, cutting width (max.): 420 mm, Cardboard shredder for recycling cardboard and producing void fill material (cardboard mesh). Includes AL-KO extraction unit. Easy adjustment of the cardboard mesh width via a movable stop. Regardless of the width of the cardboard to be shredded, cardboard mesh of uniform width is always produced. Gksdpfxjy Dqvde Akhjd

Condition: like new (used), Year of construction: 2019, operating hours: 4,828 h, functionality: fully functional, overall weight: 32,000 kg, total width: 2,550 mm, total length: 10,000 mm, total height: 3,900 mm, transport width: 2,550 mm, transport length: 10,000 mm, transport height: 3,900 mm, year of last overhaul: 2025, rotor diameter: 600 mm, rotational speed (min.): -5 rpm, rotational speed (max.): 32 rpm, Doppstadt Inventhor Type 9 SA - Year of manufacture: 2019 - Operating hours: 4828 - Engine: MTU 6R1300 (390 kW / 530 hp) - Remote radio control - Hydraulic drive - Vario Direct Drive system – smooth power transmission depending on demand - “Load sensing” hydraulic system - 3-axle trailer chassis - Shaft dimensions: 3000 x 600 mm - Number of teeth: 42 - Limiters: 20 - Output conveyor: 8.5 m - Belt width: 1200 mm - Total weight: 33,000 kg - Central lubrication system - Hydraulically adjustable magnetic separator (above the conveyor belt) - Automatic reversing function for removing material without interrupting operation - Hydraulically opening shredding chamber Godpfe Aarl Hex Akhokd - Hydraulic adjustment of the counter-comb pressure - Shaft rotation speed: from -5 to 32 rpm - DoppBasket system – optional equipment - Hydraulically lifting hopper - Ability to start under full load Machine available immediately!

Condition: used, Year of construction: 2009, functionality: unexamined, power: 196 kW (266.49 HP), total height: 2,570 mm, total length: 3,500 mm, total width: 1,200 mm, 2G / WEIER Gas CHP – Engine/Generator Set Gas-powered combined heat and power plant from 2G. The unit is housed in a soundproof enclosure and features a gas control system, heating and engine circuits, and a heat exchanger. Unit/Engine: WEIER Type: GEN.DASGM 250/4L Year of manufacture: 2009 Voltage: 400 V Frequency: 50 Hz Rated current: 400 A Power: 196.0 kW Speed: 1,514 rpm Power factor: cos φ 0.86 Protection class: IP54 Insulation class: F Max. ambient temperature: 70 °C Max. operating pressure: 6 bar Marking: CE / EN 60034/05 Ignition system: Manufacturer: Altronic Inc. Type: CD200 – Programmable Ignition P/N: 791070-6 Gjdpezzbhpefx Akhskd S/N: 3218 Supply: 12–24 V DC Max. ambient temperature: 105 °C Location: Neuenkirchen-Vörden, Germany An inspection of the unit is possible after prior arrangement. If you are interested or have any technical questions, please feel free to send us an inquiry. We will provide you with further information and documents upon request.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12389, Equipment: documentation/manual, We are offering this used FAT T1 regeneration system, manufactured in 2013. 1. Brief Description For sale is a thermal sand regeneration system from the German manufacturer FAT Förder- und Anlagentechnik GmbH. The system is currently in operation and is being sold solely due to a capacity expansion at the site. The sale is not due to any technical or economic deficiencies. The system has only been operated in a production hall and is in very good technical and visual condition. 2. Technical Data Manufacturer: FAT Förder- und Anlagentechnik GmbH Type: T1 Factory Number: 12389 Year of Manufacture: 2013 Fuel: Natural Gas Thermal Output: 350 kW Regeneration Temperature: approx. 850 °C Throughput: approx. 850 to 1,300 kg/h Sand System: PEP-SET / Cold Resin Systems Volatilization Loss: up to approx. 0.1% Installation: Production Hall Availability: Dismantling from mid-September 2026 Godpfx Aszhvagskhskd 3. Scope of Supply The scope of supply includes:  Frequency-controlled sand dosing via screw conveyor  Sieve  Magnetic Separator  Thermal Regeneration Furnace  Cooler Sand/Air Cooler (Recuperation) Air/Water Cooler Chilling Unit  Control Cabinet  PLC Control  Electrical Equipment  Pneumatic Components  Original FAT Documentation Not included in the scope of supply:  Dust extraction system, as it is connected to a central extraction system  Sand conveyor after the cooler The system is currently connected to the existing central dust extraction system of the plant. 4. Performance Features The system was designed for the regeneration of chemically bonded molding materials and achieves excellent regeneration results. Special Features:  Volatilization loss up to approx. 0.1%  High regenerant quality  Economical natural gas operation  Robust FAT construction  Proven industrial continuous operation  Complete technical documentation available 5. Documentation Scope The following documents are complete:  Operating Instructions  Maintenance Instructions  Circuit Diagrams  Pneumatic Diagrams  Installation Plans  Layout Drawings  Water Installation Plans  FAT Construction Drawings  Technical Documentation (2 folders) + Switchgear Planning The completeness of the documentation has been verified. 6. System Condition The system is in continuous production operation until dismantling. Advantages for the buyer:  Functional demonstration possible during operation  Inspection possible by appointment  Documented system condition  Weather-protected hall installation  Weather-independent dismantling and loading 7. Dismantling and Availability Dismantling is expected to be possible from mid-September 2026. The system is located inside a production hall and is very easily accessible for dismantling and loading operations. 8. Reason for Sale The system is being sold solely due to a capacity expansion at the production site. The existing system meets all technical requirements and is in functional condition. 9. Inspection Inspections and functional demonstrations are possible by prior appointment. Qualified interested parties will be provided with further technical documents, drawings and photo documentation upon request. If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2015, Length 12000 mm Width 9000 mm Used manual overhead conveyor system with a SCHUKO paint mist extraction unit and a warm-air supply system. Includes a cross-flow heat exchanger (heat recovery) and a manual overhead conveyor; in very good, well-maintained condition. Manufactured 2015–2016. ----- Gkjdpfx As Ahkkhskhed Sold on behalf of a client! The system is still in operation and available for inspection. Price is ex-site; dismantling to be performed by the buyer ((Scissor lift and forklift available on-site)). Group 1: Dry-type paint mist extraction system, model FARBMEISTER: ----- Model FARBMEISTER-25/30, including a stationary paint mist extraction wall with dry-type filtration. Baffle/filter area: H x W 2,790 x 3,140 mm (cardboard filter cells). Features a centrally positioned, solid baffle panel designed to reduce the maximum required airflow, tailored to the specific frames and casements being painted. Includes an additional pull-down pre-filter. This reduces the effective extraction area—and consequently the total airflow—from a standard ~14,000 m³/h to the required 10,500 m³/h. Also includes a 250 mm deep extension around the perimeter (left, right, and top) to improve the capture of overspray. A high-performance centrifugal fan (model L-EX 500) with a 5.0 kW motor, capable of an exhaust air volume of 10,500 m³/h (free-blowing), including all necessary ductwork and components to construct and install the extraction system—extending through the wall to the outside—as well as a manually adjustable exhaust air damper. Group 2: Warm Air/Supply Air System for the Spray Booth: ----- BB 1,100 warm air/supply air system for the spray booth, including a supply air unit (model WZL110-com) equipped with an integrated heating coil (hot water connection, supply temperature +80°C). The unit has an air capacity of 10,500 m³/h and a 5.0 kW motor. The required heating capacity, based on a temperature differential (Delta-T) from -15°C to +22°C, is 137 kW. The system features an automatic louver damper at the air intake to seal off the ductwork and prevent cold air from entering when the system is not in operation. It also includes an explosion-proof warm-air thermostat designed to shut down the system in the event of a loss of heating capacity (hot water supply). This group encompasses all ductwork and supply air components, spanning from the external air intake to the air outlets in the distribution ceiling located above the spray wall. A cross-flow plate heat exchanger for heat recovery from the exhaust air duct leading outdoors, while simultaneously preheating the fresh air drawn in from outside. With an exhaust air temperature of +20°C and a fresh air temperature of -12°C, this results in an energy saving of approximately 58 kW of heating capacity. Includes all necessary duct and pipe components for integrating the exhaust and supply air lines with the plate heat exchanger, in accordance with the attached planning drawing. Also includes a maintenance/repair switch and a differential pressure monitor for supervising the intake filter. Please note that the heat exchanger core must remain easily accessible for routine maintenance and cleaning. Group 3: Electrical System Control for Paint Mist Extraction: ----- Electrical system control for paint mist extraction...

Condition: ready for operation (used), Year of construction: 2005, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: X-tra 550 HI, total width: 495 mm, total length: 620 mm, total height: 570 mm, maximum load weight: 10 kg, heating capacity: 3,000 kW (4,078.86 HP), tank capacity: 45 l, type of input current: three-phase, inner dimension height: 350 mm, inner dimension length: 500 mm, inner dimension width: 300 mm, overall weight: 35 kg, input voltage: 400,208 V, input frequency: 5,060 Hz, year of last overhaul: 2026, • Ultrasonic cleaning unit Elma X-tra 550 HI See data sheet in the appendix 1 unit • Rinsing basin X-tra 550 HI SW See data sheet in the appendix 1 unit (one of which currently has a defective heating element) • Drying basin X-tra 550 WLT See data sheet in the appendix Gkodoz Tlaljpfx Akhod 1 unit Condition: used – fully functional – the units have been cleaned and their functionality checked by the maintenance department Year of manufacture: 2005 I am available for further information.

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,100 kg, rotor diameter: 700 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,400 rpm, power: 90 kW (122.37 HP), Equipment: rotational speed infinitely variable, This shredding machine is exceptional and highly innovative. The material to be processed is reduced to particles in 6 rows of small chambers, particle by particle, while simultaneously the particles are propelled against the grinding surface. The combination of these two effects results in a very fine grain size, and it is possible to dry the material during the shredding process. Keywords: turbo mill, impact mill, eddy current mill. Depending on the material, the machine can reduce the particle size to between 1000 µm and 5 µm. The throughput rate is between 100 and 900 kg/h, depending on the material. Gkodszl Shzopfx Akhed The possible applications range from minerals, industrial products, powder coatings, chemicals, and dyes to food and feed products. The innovations of the machine are: • the plug-in connections of the wear tools (always in the same position with minimal tolerances) • rotation in both directions – this ensures that the tools wear evenly on both sides • conical design – allows the cutting gap to be adjusted precisely to 0.1 mm with only 12 screws. Technical data: • Drive power 90 kW – frequency converter (FU) is essential – frame size 90 kW with 150% overload for 60 seconds. • Speed up to 125 m/s • Tools: rotor and stator made of hard metal, available in different degrees of hardness; ceramic is also possible. • Machine monitoring via bearing temperature measurement and vibration measurement included. • Control cabinet is not included.

Condition: good (used), Year of construction: 2002, ARCEN CONCRETE BATCHING PLANT – FOR STABILIZATION PRODUCTION. YEAR OF MANUFACTURE: 2003. CONDITION: GOOD. MIXER: 3500 l/2.5 m3 – 160 t/h. AGGREGATE STORAGE BIN, CEMENT SILO, CATERPILLAR GENERATOR. Godpfx Aksz H H R Rjhjkd

Year of construction: 2009, condition: used, Complete cable recycling plant for sale – including MG Recycling Compact 220T (in excellent condition) Gedjzgx H Hepfx Akhokd For sale is a complete cable recycling plant (dry process) for the efficient recovery of copper from cables. ⭐ Core component of the plant: MG Recycling Compact 220T (year of manufacture 2009) * Industrial compact system for separating copper, aluminum, and plastic * Capacity: up to 400 kg/h * Power consumption: approx. 37 kW * High-quality granulation & separation * Very robust design (approx. 3.2 t machine weight) ➡️ Proven system for cable recycling with high purity and reliable continuous operation. ⸻ ⚙️ Other components of the plant: * Large screening system (TST – separation & sorting technology) * Additional separation table for post-separation * Various conveyor belts & screw conveyors * Large two-shaft shredder for pre-shredding * Cable stripping machine The components from TST are specifically designed for industrial separation and screening processes and enable very precise classification and purification of materials. ⸻ Performance data of the complete plant: * Throughput: approx. 200–300 kg of cable per hour (realistic in operation) * Recovery: up to 99% copper content * Process: completely dry (no water, no sludge) * Ideal for: * Copper cables * Electronic scrap * mixed cable batches ➡️ Very efficient post-processing through additional screening and separation tables → maximum yield! —————- Special features: * Completely coordinated production line – ready for immediate use * Expandable / modular design * Perfect for commercial cable recyclers & recycling companies * Energy-efficient separation technology without wastewater —————- Condition & sale: * Plant is in good condition and currently in operation * Sale due to operational restructuring * Inspection possible by appointment —————- Price: Negotiable – realistic offers welcome

Condition: new, functionality: fully functional, fuel type: diesel, overall weight: 16,500 kg, Year of construction: 2026, Throughput capacity: up to 200 t/h Screen box: 2,743 x 1,220 mm Screen decks: 2 Screen angle: 14° Feed hopper capacity: 5 m³ Drive: diesel-hydraulic Discharge height, final discharge conveyor: 3,430 mm Discharge height, fine fraction discharge conveyor: 3,145 mm Discharge height, medium fraction conveyor: 3,145 mm Weight (without options): 16,500 kg Transport dimensions: 9,880 x 2,550 x 3,190 mm Throughput capacity: up to 200 t/h Screen box: 2,743 x 1,220 mm Gsdsz Nhvuspfx Akhokd Proven quality. High throughput. Robust design. Worldwide support: service and spare parts support worldwide.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: QuickTOCultra, Manufacturer: LAR Type: QuickTOCultra Description: TOC analyzer Technical specifications: Measurement parameters: TOC (Total Organic Carbon), DOC, TIC, TC Measurement principle: High-temperature combustion (HTC) at 1,200°C – no wet chemical reagents required Measurement ranges: 0.1 ppb to 20,000 ppm (depending on configuration) Complies with standards: EN 1484, ISO 8245, EPA 415.3 Applications: Drinking water, process water, wastewater, ultrapure water (USP/Ph.Eur.), pharmaceuticals, chemicals Sampling: continuous online operation Interfaces: 4–20 mA output, RS-232, Modbus (depending on configuration) Gkedjv N U Tlepfx Akhed Power supply: 230 V AC, 50/60 Hz

Condition: good (used), Jordan MK1 High shear mixing plant Stainless, 100L high shear mixing plant, mayo plant, variable speed high shear mixer, 4Kw, steam jacketed vessel, with Johnson lobe pump outfeed, variable speed pump, mobile, 3Ph Gkjdpow Dhhwofx Akhjd

Condition: refurbished (used), Complete cheese grating line for cheddar or Mozzarella cheese blocks. Cheese blocks are cubed and fed to the Cheese grater then up a conveyor dosed with powder and tumbled Arcall Cheese cutter, transfer conveyor, Urschel CC grater, incline conveyor and tumble mixing drum Gkjdpsp T Tghefx Akhed Can produce 1,000 Kg of grated cheese per hour. A Weigh bagging system can be added to the grated cheese line

Condition: used, DAF Plant Comprising of: - Gksdpoy Au Arefx Akhjd DAF plant white water system Chemical dosing Polymer mixing Air compressors and control system. Feed pumps and blower available if required. *Drawings available* Located in Bristol, UK (Buyer to remove)

Condition: excellent (used), Year of construction: 2010, CEMENT SILOS 53 m³/68 tons, FILTER, LADDERS, SAFETY RAILINGS, LEVEL SENSORS, GOOD CONDITION + Gksdpfe Af Ey Ujx Akhjd

Condition: used, Year of construction: 2016, Bread production line WP Haton consisting of: Godj Ahwpbspfx Akhskd - WP Haton V300 weighing machine - WP Haton BIP-72-M fermentation cabinet - WP Haton conical shaping machine

Year of construction: 2023, condition: used, functionality: limited functionality, GÜNTHER - SPLITTER TWIN WAVE The Günther SPLITTER Twin Wave is a screening/separation machine designed for materials that are difficult to screen, especially coarse, wet, sticky, or contaminated substances. It is used to separate material based on grain size and to remove unwanted components such as stones, clay, mixed waste, or unshredded material. The machine is particularly suited for construction material recycling and processing, especially for mixed construction waste, excavated soil, as well as stones and earth. The twin-wave design keeps the material longer on the screening deck, helping to better dislodge adhering or clay-heavy components. Gkjdpfx Aksy N Rlvjhod

Condition: like new (used), Refrigeration pack bought new in 2023 and never used. Cost almost £2 million, this was installed to run a spiral freezer and other machinery but due to the company going bankrupt, it was never commissioned. Extremely efficient to run compared to conventional systems. Gksdpswcwbqefx Akhed

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,200 h, functionality: fully functional, power: 35 kW (47.59 HP), Spanner wood gasifier HKA 35 for sale A Spanner wood gasifier HKA 35, manufactured in 2022, is for sale. The system is in good and well-maintained condition and is currently still in operation. An inspection and demonstration under operating conditions are possible after prior arrangement. The system is operated with wood chips. A major advantage: independence from the gas and energy market. Technical data: Manufacturer: Spanner Type: HKA 35 Year of manufacture: 2022 Electrical output: 35 kWh Thermal output: 80 kWh Operating hours: approx. 3,200 h The sale is solely due to the seller's retirement. The system has always been operated with care. All customer service and maintenance work has been carried out regularly. Gkjdpfx Ako Ait Aiohjd Location: 88339 Bad Waldsee Price: €120,000 (negotiable) For further information or to arrange an inspection appointment, please do not hesitate to contact me. Private sale.

Condition: good (used), HK Refrigeration Refrigeration plant Gjdpfxeqqiygs Akhskd