Used Plants for sale (2,999)

Condition: used, Year of construction: 2011, operating hours: 19,630 h, functionality: fully functional, machine/vehicle number: 1263718, type of input current: three-phase, power: 400 kW (543.85 HP), input voltage: 400 V, rotational speed (min.): 1,500 rpm, total height: 1,850 mm, total length: 3,090 mm, total width: 1,480 mm, fuel: biodiesel, overall weight: 4,500 kg, type of cooling: water, nominal power: 400 kW (543.85 HP), nominal power (apparent): 400 kVA, input frequency: 50 Hz, empty load weight: 4,500 kg, Equipment: documentation/manual, Two MWM cogeneration plants manufactured in 2011 are for sale. They are ideally suited for decentralized combined heat and power generation. Key technical specifications of the MWM cogeneration plant, according to the documentation: Fuel used: biogas Generator: MarelliGenerators Engine: MWM GmbH Type: TCG 2016 V8 C Identification No.: 1263718; 1263719 Year of manufacture: 2011 Engine mechanical power: 415 kW Engine electrical power: 400 kW Thermal power: 398 kW Max. fuel consumption: 941 kW Speed: 1500 rpm Ignition system: Altronic ZS3 Ignition system No.: 3644 Ignition angle: 23.00 Ignition plug type: 12342688 Power regulation: multi-stage Iedpezudbfjfx Abpsif GEN-1: 19,440 operating hours GEN-2: 19,630 operating hours The cogenerators are sold with electrical and control cabinets, flue gas heat exchangers, emergency coolers, engine circuit pumps, heat exchangers and three-way valves, ventilation air systems, and acoustic containers.

Condition: excellent (used), 1 x Oddy Novatek 2 Roll Plant Iedpey Hk Daofx Abpoif

Year of construction: 2019, condition: new, Preparation of a written offer / cost estimate for a powder coating system from the company Romer. Iisdpfxsc Sd D Sj Abpof

Year of construction: 2011, condition: ready for operation (used), The ultrafiltration system is used to purify various liquids. The membrane elements feature a 37/3.8 channel design, a pore size of 0.1 µm, and a length of 1300 mm. Each of the two modules contains 32 ceramic rods, with a total capacity of 2,000 L/h per module. 1 structural frame, 1 feed pump, 1 rod heater, 2 bleed pumps, 1 cleaning tank, 1 membrane valve, 1 compressed air membrane pump, 1 UF ceramic module, 1 temperature monitoring unit, 1 control valve, 4 pressure gauges with display, Iiedpfx Aof Dc D Hjbpsf 1 control unit compliant with VDE 0110/0113 CE, 1 flow meter, 1 pre-assembly of the system at the supplier's factory.

Condition: good (used), HK Refrigeration Refrigeration plant Iiedpfxeqqiyge Abpjf

Condition: good (used), HK Refrigeration Refrigeration plant Consists of twin fan and compressor Iodpoqqhr Nefx Abpoif

Condition: used, CIP system comprising a total of 7 tanks, of which: - 1 tank with a capacity of 60 hl, used as a buffer water tank - 5 tanks, each with a capacity of 30 hl (built in 1992), for acid, buffer water, Desi and 2 x lye - 1 tank with a capacity of 20 hl (built in 1992) for fresh water Other system components: - 2 centrifugal pumps - Heat exchanger - Conductivity measurement - Various pipework and valves Additional title: 7-tank CIP system with pumps and heat exchanger Iiedpozi Anaofx Abpef Volume stacked water tank: 6000 l Volume 5 x tanks for cleaning solutions: 3000 l Volume fresh water tank: 2000 l Material: stainless steel Position: vertical vessels each on 3 feet Features: 7 x CIP tanks (comprising 1 x 60 hl, 5 x 30 hl and 1 x 20 hl); 2 x centrifugal pumps; heat exchanger; conductivity measurement; various pipework and valves

Condition: like new (used), functionality: fully functional, Year of construction: 2010, The line is from 2010. Modernization is being done in 2020. ZEMAN CZS LINE SPECIFICATIONS ZEMAN's flagship product, the fully automated "PURLIN" line, is used to produce open, cold-formed sections such as C, Z, and SIGMA, in various widths and shapes, thanks to fully automatic adjustment of the profiling rollers. Coils up to 750 mm wide and 1.25 mm to 3 mm thick sheet metal in grade S-390 and lower can be used as raw material. The machine is designed to produce components up to 15 m long. The width of the specially hardened profiling rollers is infinitely adjustable, using only dedicated software. A fully integrated "flying punching" device creates all types of mounting holes, and the entire process is continuous, meaning the material does not stop for individual operations such as punching holes or cross-cutting. To maintain production efficiency, the line speed is dynamically optimized. The machine decelerates and accelerates automatically without operator intervention. A coil uncoiler with a maximum working load of 15 tons is mounted on a mobile trolley, enabling precise centering of the material strip before feeding it into the straightener. The straightener, along with a crescent straightening system, allows for straightening the material, ensuring the required sheet flatness and reducing the crescent on the feed belt. 2. Punching Section This section contains 5 double, "flying" punching portals, which can be equipped with 20 small (up to 40 mm) or 10 large (up to 100 mm) tools (punches and dies) for punching mounting holes. A combination of these tools can also be used. 3. Pre-cutting Shear A "flying" shear used to make preliminary holes for the cutting shear. This process is designed to maintain material continuity, resulting in a more precise profile shape, especially at its beginning and end. This is an adaptive guillotine that adjusts the width of the hole being cut to the width of the sheet metal strip. 4. Guide Carriage/SIGMA Modules The guide carriage is used to center the sheet metal strip before entering the profiler. It is interchangeable with the module for producing Sigma-shaped profiles. To produce S+ profiles, the guide table should be removed and two Sigma modules inserted. These modules position fully automatically and independently, left and right. 6. Rotary Cut-Off Guillotine. Iiodpfx Aboymampspef The rotary cut-off guillotine with hook knives is used to finally cut the profile from the material strip using the holes made by the pre-cutting guillotine. This is a "flying" guillotine, so the sheet metal does not stop during the cutting process. Depending on the profile being produced, a properly oriented cutting cassette should be attached. 7. Receiving Table The receiving table is used to automatically discharge the completed profiles from the roller conveyor. The elements are then manually arranged into a package. The design allows for easy bundling of the package. The table is designed to accept 15-meter profiles and allows for access by a forklift or overhead crane to collect the package of profiles.

Condition: used, System for depalletising empty beverage crates and palletising full beverage crates. The system consists of the following components: - Depalletiser (Matek/Packtech, 2001), robotic gripper arm with clamping grippers. Upgrades were carried out in 2017. - Palletiser (Matek/Packtech, 2001), robotic gripper arm with clamping grippers. - Pallet pressure control (Matek/Packtech, 2001) - 2 pallet magazines for good and defective pallets - Pallet labelling (2005) for applying ‘EAN 128’ labels - Pallet strapping (Strapex, 2005) - Pallet conveyors with loading and unloading stations Additional title: Complete palletising and depalletising system for beverage crates; manufactured Ijdpezizwasfx Abpsif Capacity: 44000 bo/h Formats: 0.5 L NRW bottles in 20-bottle and 9-bottle crates Features: Depalletising robot; Palletising robot; Pallet inspection; 2 x pallet magazines; Pallet labelling; Pallet securing; Pallet transport; Pallet receiving and dispatch

Condition: used, Year of construction: 2003, A system for blending beer with degassed water and subsequent carbonation. Additional title: Carboblender for precise mixing and carbonation Capacity: 20000 l/h Material: contact surfaces from stainless steel Iisdpfozizthjx Abpsf Position: mounted on stainless steel frame Features: various pipes, valves and sensors; control cabinet with touch panel

Condition: used, Complete beer clarification system, comprising the following main components: - Diatomaceous earth cartridge filter (Filtrox, 1979) with a capacity of 27.1 hl and a filter area of 26.62 m². Refurbishment work was carried out by Steinecker in 2002. - Cartridge membrane filter (H&K, 2011) with 24 filter cartridges and a filtration capacity of 200 hl/h - Buffer tank for unfiltered wine (Gross, 1979) with a capacity of 61.5 hl - Buffer tank for filtered wine (Gross, 1979) with a capacity of 10 hl - PVPP dosing vessel (1981) - Diatomaceous earth dosing vessel (1979) Iijdpfszizq Tox Abpjf Additional title: Complete filtration system with buffer tanks and dosing for filter aids Filtration capacity: 18000 l/h Material: Contact surfaces from stainless steel Features: Cartridge filter; cartridge membrane filter; 2 x buffer tanks; 2 x dosing vessels; various pipes, valves and sensors

Condition: used, Refrigeration system with NH₃ in the primary circuit and glycol in the secondary circuit. The system consists of the following components: 1. 2 refrigeration compressors for compressing NH₃, of which: - 1 x reciprocating compressor (Sabroe, 2008) with a capacity of 75 kW (used during normal operation) - 1 x screw compressor (Stal, 1991) with a capacity of 75 kW (used as a standby unit) 2. Plate heat exchanger (Alfa Laval, 1997) for evaporating NH3 whilst simultaneously cooling glycol. 100 m³/h of glycol is cooled from 0°C to -3°C. The glycol transports the cold into the process. 3. Condenser for the liquefaction of NH₃ (Evapco, 2002) with a condensation capacity of 620 kW, installed outdoors. 4. NH3 collection tank (EM-Polar, 2009) with a volume of approx. 3 hl 5. Glycol tank, vertical, clad 6. 2 centrifugal pumps for pumping glycol 7. Control cabinet with touch panel as HMI. 8. Various pipework, valves, sensors Iiodpfx Aozizkgobpsf Additional title: NH₃-glycol cooler as a secondary cooling system; manufactured between approximat Cooling capacity appr: 300 kW Operation / Control: Simatic S7-1500 (manufactured in 2022) Features: 2 x refrigeration compressors; plate heat exchanger (evaporator/glycol cooler); condenser; NH₃ tank; glycol tank; 2 x glycol pumps; control cabinet with touch panel; various pipes, valves and sensors

Condition: used, CIP system comprising three 20 hl stainless steel tanks for acid, lye and caustic soda. The two lye tanks are thermally insulated. Additional title: 3-tank system for cleaning the brewhouse Iijdpfozizfdox Abpof Vessel volume each: 2000 l Length: 5,8 m Material: vessels from stainless steel Position: vessels standing on 3 feet each Features: 3 CIP tanks (2 of which are insulated); feed pump; chemical dosing system; 2 filter cartridges in the pipeline; conductivity measurement; pneumatic valves; control cabinet; pipework

Year of construction: 2017, condition: used, Biological lactic acid plant for the production of lactic acid to adjust the pH of beer wort. In two fermentation tanks, each with a capacity of 40 hl, the wort is fermented by lactobacilli to produce lactic acid at 45–50 °C. Each tank is fitted with a sampling tap, two heating elements, a safety valve and a vacuum valve. Additional components: - 2 plate heat exchangers - 2 inductive flow meters - 2 centrifugal pumps - Pipework Additional title: Two-tank system for supplying lactic acid to the brewhouse Tank volume each: 4000 l Iijdszizdajpfx Abpsf Operation / Control: visualized in ProLeit Material: Tanks made of 1.4571 and 1.4404 stainless steel (AISI 316Ti and 316L) Position: tanks standing on 3 feet each Base construction: cylindrical tanks with dished bottoms Features: Each tank is fitted with: cladding, safety valve, vacuum valve, 2 x heating elements, sampling tap, outlet pipe with manual valve; Miscellaneous: 2 x centrifugal pumps, 2 x heat exchangers, 2 x flow meters; pipework

Condition: used, Plant for the conditioned milling of malt into grist and for the subsequent storage of the grist. In a conditioning screw conveyor, the malt is moistened with water at 60°C before being ground into grist in the 6-roll mill (Künzel, 1966). The conditioning water is pre-treated in a water treatment system (Täuber, 2019). The grist is collected in a funnel-shaped grist hopper mounted on legs and fed into the grist transport system. Additional title: 6-roll mill for conditioned dry grinding; built between 1966 and 2019 Iijdpfx Absziy U Djpof Capacity: 1200 kg/h Features: 6-roll mill; conditioning screw; water treatment

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1990, fully refurbished Kleemann screening plant, including hopper, new PLC and wiring, conveyor belts, new screen decks and flip-flow mats, and a frame that can be placed on concrete blocks. The screen is a three-deck screen, so you can produce 4 fractions; the bottom 2 decks are flip-flow decks. Iijdpfx Abjzd Dggepof

Condition: good (used), Imer mixing plant Type: Mix 360 Ijdpfx Aoq Eh Hujbpeif Bowl diameter: 90 cm Boiler height: 52 cm Electricity: 400 V

Condition: ready for operation (used), Manufacturer: H&G Model: HG/SV 11 Isdpfx Aozp Ipijbpoif Weight: 1800 kg Engine power: 11 kW

Condition: ready for operation (used), Manufacturer: H&G Model: HG/SV 11 Iijdpfxszp Ilqo Abpof Weight: 1800 kg Engine power: 11 kW

Condition: good (used), Year of construction: 2017, Lennox CAC160DM1M Refrigeration plant Serial: 10090777ES03170615 2017, Four fan system, two compressors and heat exchanger Iedpfx Asqqiynsbpoif

Condition: good (used), Swegon Ucame101 refrigeration plant Serial: bfrs022020 Single fan unit Iedpfeqqhrdjx Abpoif

Condition: good (used), HK Refrigeration Refrigeration plant consist of twin fan evaporator and Copeland compressor Iisdsqqix Uepfx Abpsf

Condition: good (used), HK Refrigeration Refrigeration set Consists of Friga-bohn twin fan evaporator and copland compressor Iiedoqqhraspfx Abpof

Year of construction: 2012, condition: used, Technical data: Table support surface: Width x depth x max. clamping distance: 192 x 115 x 120 mm Height of cutting disc center above table: 520 mm Cutting disc height adjustment via Cylinder with measuring system: 445 mm Cutting disc dimensions: Min.: 350 x 2.8 x 32 mm Max.: 400 x 4.0 x 32 mm Workpiece dimensions max. length: Workpiece feed: 3500 mm Workpiece discharge: 2000 mm Workpiece dimensions min. length: Workpiece feed: 300 mm Workpiece discharge: 300 mm Workpiece feed: servo-controlled Iiodevu U Hpspfx Abpsf Measuring distance via measuring system: 3500 mm Circumferential speed: 25 - 60 m/sec Main motor: 10 kW Dimensions Separation system (WxDxH), approx.: 850 x 1600 x 2815 mm Weight: Machine: 980 kg Workpiece feed: 380 kg Workpiece discharge: 350 kg Control cabinet: 280 kg

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: A1407003, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: cabin, For Sale: Complete Venjakob Surface Finishing Line We offer a complete Venjakob automated surface finishing line designed for high-efficiency coating, sanding, and drying of flat workpieces. This line is ideal for industrial applications requiring consistent and high-quality surface treatment (e.g. furniture, doors, panels). Ijdsxm Twtjpfx Abpjif The Venjakob line consists of: VEN TRANS BELT modules: 0100 / 0300 / 0500 / 0600 / 0800 / 1000 / 1200 / 1300 / 1350 VEN SAND BRUSH modules: 0200 / 0900 VEN SPRAY COMFORT modules: 0400 / 1100 VEN DRY AIR JET modules: 0700 / 1400 Technical data provided in the documentation.