Used Plasma Tubes for sale (2,396)

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input current: 50 A, Microstep Mastercut Eco Plus 3001.15 Ijdpfx Acsy Nd Hyepetn Year of manufacture: 2017 Control system: IMSNC Oxy-fuel cutting table: 3000 x 1500 mm Extraction duct left / right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process control with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short circuit time during torch ignition, and power source • Operating status and error display via LED and screen • Analog and serial interfaces for adaptation to CNC controllers • Infinitely adjustable cutting current from 10 - 160 A and during marking from 5 - 25 A • Optimal piercing through infinitely variable delay time for the main arc and adjustable current rise • Adjustable current reduction for cornering, start, and end signals of the guidance system • Automatic display of the preset cutting current • Serial data transmission for PC-based diagnostics Plasma cutting technology: Contour Cut • Further development of HiFocus technology for mild steel • Optimized for cutting fine internal and external contours • High cutting quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 range 2-4 • Minimal angular deviations and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No tedious post-processing – high productivity and low costs • No additional equipment, software, or new consumables required • Standard equipment Plasma torch PerCut 200/210 • PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting • Quick-change PerCut 210 torch with threaded lock for quick and convenient tool swapping • Special torches available for special applications • Higher cutting speeds reduce cost per meter • Long service life of consumables conserves resources • Narrower kerf means fewer emissions and less waste • Significantly lower gas consumption compared to competitors thanks to efficient liquid cooling up to the nozzle tip • Lower noise levels due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Power source HiFocus 161i Power supply: 400 V; 3 Ph; 50 Hz Max. power input: 28 kVA (100% duty cycle) Main fuse, slow-blow: 50 A Protection class: IP22 Open circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: Max. 50 mm Recommended: 0.5 – 38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma machine torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)

Year of construction: 2026, condition: refurbished (used), LINEAR CAGE FORMING TUBE MILL VAI 89.5(6) with universal CTA forming REVAMPED AS NEW Specifications: - Manufacturer: VAI Voest Alpine Industrieanlagenbau - Round tube diameter: 33.7 - 88,9 mm - Square tube: 30x30 - 70x70 mm - Rectangular tube: 40x20 - 100x40 mm - Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) - Speed: 100 m/min Complete line with: - Double expandable mandrel with PEELER OTO AD408 SD - Strip entry line with strip opener, driven pinch-roll, pre-leveller and lateral guiding rolls - Automatic strip joiner - Intermediate strip guding stand - Break down section - Forming section : Universal CTA Forming section VAI CTA90 - Fin pass section - Welding section - Double Cooling tunnel - Sizing section - Off-Line sizing stands - Turk-head section - Motorised Exit roller conveyor Scope of supply: 1. Double expandable mandrel with PEELER OTO AD408 SD - Strip width 500mm - Hydraulic expansion - Snubber roll top/bottom - 8 Tn/arm - Pneumatic servocontrolled brake 2. Strip peeler - Strip opener 3. Strip Guiding 4. Break down section - 2 motorised stands - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 5. Forming section - Universal CTA Forming section VAI CTA90 6. Fin pass section - 2 motorised FP with rafted quick change - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 7. Welding section Itedoy Uhxkspfx Acpjn - 4-roll configuration - Heavy duty welding head with lateral and top adjustment 8. Double Cooling tunnel - 2 x 4000mm With V-rollers support 9. Sizing section - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 10. Off-Line sizing stands - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 11. Turk-head section - 3 turk-heads - Heavy duty changing plates 12. Complete set of rolls Round tube diameter: 33.7 - 88,9 mm Square tube diameter: 30x30 - 70x70 mm Rectangular tube diameter: 40x20 - 100x40 mm Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) Speed: 100 m/min

Condition: good (used), Year of construction: 1978, control type: manual, actuation type: hydraulic, pipe diameter (max.): 33 mm, tube wall thickness (max.): 2 mm, working height: 800 mm, total length: 1,850 mm, total width: 1,000 mm, total height: 1,000 mm, power: 1.5 kW (2.04 HP), Conventional tube bending machine, with various bending tools Ø 20 ... 33.7 mm + 4KT 25x25 mm Itjdpfx Acoyr Rx Hspon

Condition: new, Year of construction: 2021, machine/vehicle number: XPR300-005397, type of input current: three-phase, overall weight: 680 kg, input voltage: 360 V, cutting current: 300 A, ambient temperature (max.): 40 °C, We offer this new Hypertherm XPR300 plasma cutting source, year of manufacture 2021. Only the plasma source is for sale. New, unused. 2 plasma sources available. Forklift on site. Manufacturer: Hypertherm Model: XPR300 Year of manufacture: 2021 Condition: new Category ID: 1448 Type ID: 2170 Type: plasma cutting machine If you have any questions or need further information, please send us a message or call us. Iodsy Dqrfspfx Acpetn

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: COMBO (Plasma, Drilling, OXY-Fuel, Bevel), Equipment: CE marking, documentation/manual, * COMBO offers customers the most innovative technological solutions and features a wide range of models. * It is a highly advanced machine equipped with a 6- and 12-station automatic tool changer ISO 40 drilling system, offering capabilities such as drilling, tapping, countersinking, plasma cutting, OXY cutting, and ±45° bevel cutting. Itodpfxoyy Rn Ss Acpjn * The COMBO has a working range from 1,500 mm x 3,000 mm up to 4,000 mm x 24,000 mm and can be equipped with high-capacity plasma power sources. * Plasma Cutting * Drilling * Tapping * Countersinking * OXY-Fuel Cutting * Fully welded, heavy-duty machine frame. * High-durability cutting table designed for easy replacement. * Dual drive system with linear rails, rack and pinion. * Compliance with CE standards. ISO 40 Drilling System * 6-station automatic tool changer (optional 12-station). * CNC-controlled automatic coolant spraying system during cutting. * 26 kW spindle motor power. * Drilling capacity: Ø M5 to Ø M40 (HSS, UDRILL). * Drilling depth: 100 mm * Drilling speed: 0.15 – 0.35 mm/rev. * Spindle speed: 1,500 rpm * Hypertherm / Thermal Dynamics power sources. * Hypertherm / Eurosoft CNC controls. * Possibility to import .dxf and .dwg files via Pronest / Cut-Expert CAD-CAM.

Condition: used, KABBERT Körnerpresse – Duct Corner Insertion & Press Machine A high-quality, German-engineered press machine specifically designed for the fast and secure locking of metal corner pieces into rectangular duct flanges. The Kabbert Körnerpresse replaces manual hammering, using a powerful mechanical press mechanism to lock the corner elements tightly into the profile joints for an airtight and rigid connection. Specifications • Manufacturer: Kabbert GmbH (Germany) • Type / Model: Körnerpresse (Flange Corner Press) • Machine No. (Masch. Nr.): 310616 • Application: Inserting, pressing, and locking corner pieces into rectangular ventilation duct profiles. • Maximum Sheet Thickness (Blechstärke): max. 1.5 mm • Machine Weight (Gewicht): 50 kg Key Features & Components • Precise Corner Locking: Specifically designed to press and secure metal corners at the joints of profile flanges, ensuring a perfectly aligned and rigid duct frame. • High-Speed Assembly: Eliminates intensive manual labor and hammering, significantly speeding up the final assembly of rectangular duct sections. Itodozbqk Uspfx Acpjn • Preserves Galvanized Coating: The cold-pressing technology forms a strong mechanical lock without scratching, burning, or damaging the zinc layer, maintaining full corrosion resistance. • Compact & Portable: Weighing only 50 kg, the machine is highly space-saving, easy to relocate, and fits seamlessly into any workshop layout. • Heavy-Duty German Quality: Built to industrial standards for reliable, repeatable, and trouble-free operation under daily workshop loads. Condition & Availability • Status: Fully operational and in good working condition. • Ready for delivery

Condition: used, functionality: fully functional, Year of construction: 2016, Combined profile and tube bending machine Manufacturer: Italy For round tubes up to 48 mm 1st station for ring bending for large radii 2nd station for tube bending up to max. 180 degrees Electrically driven Motor: 1.1 kW, 400 V, 50 Hz, 3-phase Iedsy Ryfnopfx Acpetn With digital display With foot pedal With tooling for 42.4 mm tube, radius approx. 150 mm Weight approx. 350 kg

Condition: excellent (used), Year of construction: 2020, PLASMA CUTTING TABLE WITH COMPRESSED AIR: TYPE REMOCUT II 1500-3000/105A PNEUMATIC ENGRAVER Iedeyug Enepfx Acpotn

Year of construction: 2014, condition: refurbished (used), High-performance 40 Ton Triple tube drawing bench BÜLTMANN GKZ 400/3-16 Complete 40 tn triple tube drawing line, revamped by Bültmann in 2014. Includes extensive set of tooling and large spare parts package. This BULTMANN GKZ 400/3-16 Triple tube drawing line combines a robust 40-ton drawing capacity with significant upgrades completed in 2014, including a Siemens S7-400 PLC conversion, renewed machine bed, rebuilt puller, and upgraded drawing carriage. The line is available immediately and is suitable for demanding tube production applications. TECHNICAL SPECIFICATIONS · Manufacturer: BÜLTMANN · Model: GKZ 400/3-16 Triple · Major overhaul: 2014 - Control cabinet overhauled - PLC converted to Siemens S7-400 - New Siemens drives - Machine bed renewed - Drawing carriage converted (wheels, damping, etc.) - New chain - Puller rebuilt · Material strength: 500 N/mm² · Input tube length: 2.5–12 m · Exit tube length: 3–16 m · Maximum drawing force: 400 kN (40 tons) · Maximum drawing speed: 80 m/min Itodpfx Aezkf I Eecpon · Return speed: 120 m/min · Main motor power: 300 kW · Hydraulic power unit: 30 kW · Auxiliary drives: 7.5 kW · Tube diameter range*: 20–65 mm · Wall thickness range: 1–5 mm * Tube range produced by the previous owner. Tooling is available for this range and should be verified onsite. SCOPE OF SUPPLY - Complete drawing bench according to layout - Renewed machine bed - Upgraded drawing carriage - New chain - Rebuilt puller - Electrical system with Siemens S7-400 PLC and Siemens drives - Hydraulic system - Existing safety barriers - Large set of tooling (to be verified onsite) - Comprehensive spare parts package (to be verified onsite) - Documentation in digital and paper format BENEFITS ✓ High-capacity 40-ton drawing force for demanding tube production ✓ Modernized Siemens automation for improved reliability and maintenance ✓ Major mechanical refurbishment completed by BÜLTMANN ✓ Includes tooling, spare parts package, and documentation ✓ Immediate availability for rapid installation COMMERCIAL INFORMATION - Machine status: Dismantled - Video of the line in operation available - Delivery: Immediate | As is, where is Material strength: 500 N/mm² Input tube length: 2.5–12 m Exit tube length: 3–16 m Maximum drawing force: 400 kN (40 tons) Maximum drawing speed: 80 m/min Return speed: 120 m/min Main motor power: 300 kW Hydraulic power unit: 30 kW Auxiliary drives: 7.5 kW Tube diameter range*: 20–65 mm (*Produced by previous owner. Tooling available for that range. To be checked onsite) Wall thickness range: 1–5 mm

Condition: new, Year of construction: 2025, pipe diameter (max.): 12,000 mm, travel distance X-axis: 12,000 mm, Equipment: cooling unit, safety light barrier, Three-chuck Heavy-duty Fiber Laser Tube Cutting Machine NS-12052HG 12000mm, 500 Chuck Itjdjv D Uhfspfx Acpen Servo drive is used for auxiliary feeding High-quality chuck Adaptive to different sizes of tubes Servo control, excellent performance Give the equipment ultra-high dynamic performance Auxiliary feeding system Reduce work intensity and improve efficiency More types of processed tubes Support flying cutting High-precision Z-axis control Bevel cutting Highly automated ≤2m workpieces are unloaded through servo flaps

Condition: new, Cesurbend Mandrel Bending Machine / Pipe Bending Machine PBM-32 Technical Specifications Max. pipe diameter: 32 mm Max. wall thickness (mm): 2 Max. bending angle (°): 190 Pipe bending speed (r/min): 8.5 Max. bending radius (mm): 275 Bending motor power (kW): 2.2 Pipe length (mm): 2000 Machine width (mm): 1000 Machine length (mm): 2300 Machine height (mm): 1050 Machine weight (kg): 300 Itjdpfx Acjxt Ra Eepjn Features • This is a semi-automatic machine. If you need to bend only a few pipes per day (25-50 pieces per day), this machine is the right choice. • It is the simplest pipe bending machine with brake motor. • Brake motor / precise bending • Manual dimension setting • Former rack

Condition: new, Cesurbend Mandrel Tube Bending Machine / Pipe Bending Machine PBNC-51 Technical Specifications Itjdpfoxt Rc Tex Acpon Max. Tube Diameter: 51 mm Max. Tube Wall Thickness (mm): 3 Max. Bending Angle (°): 190 Tube Bending Rate (rpm): 7-10 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Tube Length (mm): 3000 Bending Motor Power (kW): 5.5 Hydraulic Motor Power (kW): 3 Machine Width (mm): 1400 Machine Length (mm): 4215 Machine Height (mm): 1450 Machine Weight (kg): 1600 Features • In this process, the jaw clamps the tube after it is inserted into the machine. The tube is bent over the die to half its diameter. When using a mandrel and wiper, better results are achieved for bends requiring higher quality, with thinner wall thickness and smaller radii. • This is a three-piston machine with a hydraulic spool located behind the hydraulic boom.

Condition: new, Cesurbend Mandrel Bending Machine / Tube Bending Machine PBNC-65 Technical Specifications Max. Tube Diameter (mild steel): 63 mm Max. Tube Wall Thickness (mm): 3 Max. Bending Angle (°): 190 Tube Bending Rate (rpm): 7–10 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Min. Bending Radius (mm): 45 Tube Length (mm): 3500 Bending Tolerance (mm): ± 0.25 mm Bending Motor Power (kW): 7.5 Hydraulic Motor Power (kW): 4 Oil Tank Capacity (L): 50 Machine Width (mm): 1450 Machine Length (mm): 4250 Machine Height (mm): 1200 Machine Weight (kg): 1600 Features • 4-way adjustable gauge • Chain bending system • Gear motor • Touchscreen control panel • Foot pedal operation • Hydraulic mandrel movement • Hydraulic damping function Itodpfx Asxt Rdwecpjn • Hydraulic compression function • Hydraulic pusher • Four cylinders • 7" touch color display • 15 sequential twist positions • 100 program memory capacity • Omron PLC control

Condition: used, functionality: unexamined, Year of construction: 2001, machine/vehicle number: 3533, input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, For sale: a custom-made cutting and marking line (using disc/circular saw) for round and square tubes, manufactured in 2001 by Simec Srl (Schio, Vicenza, Italy). The system consists of a Simec bar feeder "Caricatore BM" (serial number 3587) that feeds the main Simec unit "MEC 120 MI" (serial number 3583), with a disc cutting station identified with the FAT logo. The line includes a workbench with guides and measuring scales, a collection box for cut pieces, and a roller table for material transport. The structure is mounted on legs and features its own control panel (Siemens Simatic OP3 interface and Rovan Elettronica counter/display), manual control buttons, a mode selector, pressure gauges, and a three-phase electrical connection. Iedpozvc Utofx Acpjtn Condition: it was in operation until approximately 1 year ago; the current condition has not been recently verified or tested. Inspection/testing by the buyer is recommended before purchase.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: PL260-091, type of input current: three-phase, input voltage: 380 V, total width: 4,500 mm, total length: 7,500 mm, total height: 1,500 mm, type of cooling: water, overall weight: 9,100 kg, cutting current: 260 A, sheet thickness steel (max.): 38 mm, open-circuit voltage: 380 V, working range: 60 mm, table length: 6,000 mm, table width: 3,000 mm, working width: 3,000 mm, For sale: AKYAPAK HPR 260 industrial CNC machine for thermal cutting of sheet material, manufactured in 2013. The machine is of the gantry type, with a working area of 3000 × 6000 mm, suitable for cutting large-format steel sheets. It is equipped with a Hypertherm HPR260 / HPR260XD plasma system, Hypertherm MicroEDGE Pro / Edge Pro CNC control interface, as well as equipment for oxy-fuel cutting. The machine is suitable for the production of metal structures, plates, flanges, blanks, sheet steel parts, and for heavy industrial applications. Key technical specifications: Parameter Data Manufacturer AKYAPAK Model HPR 260 Machine type CNC plasma and oxy-fuel cutting machine Year of manufacture 2013 Machine serial number PL260-091 Working area 3000 × 6000 mm CNC control Hypertherm MicroEDGE Pro / Edge Pro Operating system Windows XP Plasma source Hypertherm HPR260 / HPR260XD Plasma serial number 260XD-004364 Plasma output current 260 A Duty cycle 100% Machine nameplate power 60 kW Power supply 380 V / 50 Hz Weight 9010 kg Origin Turkey CE marking Yes Equipment and features The machine includes: CNC gantry structure; working table 3000 × 6000 mm; Hypertherm HPR260 / HPR260XD plasma system; Hypertherm MicroEDGE Pro / Edge Pro CNC control; Hypertherm gas console; gas regulators; plasma cutting torch; oxy-fuel cutting head; torch height control; slotted table with slats; fume extraction / aspiration system through the table; operator console with joystick, Start/Stop, emergency stop, and manual modes. Cutting capacity The Hypertherm HPR260 plasma system is a 260 A industrial system for high-quality plasma cutting. Approximate capacity for mild steel: production piercing: approximately 32–38 mm, depending on the material, gases, and settings; Itodpfx Acezibqaepen maximum cutting from edge: up to approximately 60–64 mm; oxy-fuel cutting allows for working with thicker steel sheets, depending on the settings, nozzles, and gas equipment.

Condition: new, Model CNC 114R1 Max. steel tube capacity (mm) 114.3 x 6 Max. stainless steel tube capacity (mm) 114.3 x 5 Min. tube diameter (mm) 32 Itsdpfx Aezt Ir Secpen Max. steel profile capacity (mm) 80 x 80 x 4 Max. radius (CLR) 300 Min. radius (CLR) 55 Control system PLC Max. bending angle (°) 190 Screen 17” Industrial PC with Windows touch screen Bending drive Hydraulic

Condition: ready for operation (used), GASTEC Detector Tubes indicate concentrations directly by way of a calibrated scale printed on the tubes. At GASTEC, we endeavour to achieve highest quality detector tubes for analysing airborne gases/vapours, as well as pollutants in soil and water through our advanced state-of-the-art research and development. Through our efforts we have acquired a solid reputation among our customers in virtually all sectors of industry, commerce and society. Tubes are now available for more than 500 different applications. Itsdpfoy D D Tcjx Acpen

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, CNC Plasma Cutting System 6000x3000 mm – EPL 3060 ERMAKSAN 5 AXES – Hypertherm XPR300 with OPTIMIX – Bevel Unit YEAR OF MANUFACTURE: 2024 The machine was newly sold at the end of 2024 and is being offered for sale due to the company’s insolvency. The photos in the listing were taken during the commissioning phase; current photos will be provided at a later date. Ijdpjy Ipb Tjfx Acpotn CNC Plasma Cutting System • Machine type: CNC plasma cutting table • Condition: Used – in good operating condition • Availability: Immediately available Working Area • Cutting table size: approx. 6000 × 3000 mm Plasma System • Plasma power source: Hypertherm XPR300 High-definition plasma system for precise and fast cutting of mild steel, stainless steel, and aluminum. Features • Bevel unit: BEVEL-R (5-axis bevel cutting system) for weld seam preparation and bevel cuts Extraction System • Sturdy, industrial gantry construction • High precision and productivity • Bevel cutting capability for complex parts

Condition: new, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 60 mm, kaitec Smart – PROFESSIONAL CUTTING TECHNOLOGY FOR PROFESSIONALS With the highly economical plasma process, material thicknesses of up to 25 mm can be cut with optimal precision. Automatic initial height sensing, automatic arc regulation, and intelligent collision protection ensure maximum quality and the highest repeat accuracy. The automated program sequence and the long service life of consumables actively help to significantly minimize cutting costs. The oxy-fuel cutting process also impresses with its straightforward handling and functionality. Thanks to the automatic piercing function, preheating times and the supply of cutting oxygen are controlled by CNC. This allows plates up to 80 mm thick to be cut very cost-effectively. The oxy-fuel system is available for acetylene or propane gas and is equipped with automatic height control. kaitec Smart – WATER TABLE SYSTEM The foundation of the flatbed design is a stable water table. The longitudinal guide mechanism is mounted with high precision on machined surfaces. The robust cutting grate features staggered, serrated support slats, providing optimal support for sheets and reducing slag formation on workpieces, as well as excessive wear on the slats, ultimately saving substantial costs on rework and maintenance. The tank depth is precisely designed to accommodate slag and support its cooling, is easy to clean, and effectively captures dust generated during cutting. Cutting area: 1,500 x 1,500 mm 1,500 x 3,000 mm 1,500 x 4,000 mm Material thickness Plasma: 1-25 mm Material thickness Oxy-fuel: 10-80 mm We look forward to hearing from you! Ijdpfx Ajx Ngn Tocpjtn

Condition: good (used), Year of construction: 1999, AXOMATIC OPTIMA 1000 Tube Filling and Sealing Machine (Plastic Tubes) Iedpsx Rqlfsfx Acpstn This compact machine has a capacity of up to 70 plastic tubes per minute and is used for filling and sealing tubes. With the appropriate format and pump sets, the machine can be adjusted to handle the following specifications: Tube diameter: 10 - 60 mm Tube length: up to 280 mm Filling volume: 2 - 300 ml The machine is offered with the following format parts: Tube holders for plastic tubes Ø 35 mm and 48 mm Manufacturer: Optima Year of manufacture: 1999 Required floor space: approx. 180 x 160 x 240 cm

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 286.001.911.20, working width: 3,000 mm, working length: 6,000 mm, controller model: Global Control S mit 15 Zoll Farb-Touchscreen, No minimum bid – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 6,000 mm Number of cutting torches: 2 Gas flow regulation: available MACHINE DETAILS Installation footprint: 9,000 x 5,000 x 2,000 mm Control: Global Control S with 15-inch color touchscreen Electrical Data Voltage: 3 x 400 V PE/N Frequency: 50 Hz Power: 9 kVA ATTENTION: The Zinser cutting bed is not included in the offer! EQUIPMENT according to the original invoice – details provided without guarantee Joystick and handwheel for Global Control S panel Cooling system for the control cabinet Laser diode Heat shield plate without air cooling Track for double-sided longitudinal drive HEB 9 m OmniFlow oxy-fuel supply up to 70 m³/h ALFA machine cutting torch with internal ignition SmartLifter 200 SensoMat ARKI Full gas addressability Light barrier systems Safety device: wheel arch foot switch Energy supply via 9 m energy chain for oxy-fuel Drag chain driver Further technical data from the manufacturer – details provided without guarantee: Track gauge: 4,000 mm Chain height: 500 mm Positioning speed: 50 m/min Itsdpfx Acjyi Ub Hopon Operating speed: max. 35 m/min Dimensions & Weight Dimensions (L x W x H): 1,940 x 5,070 x 1,980 mm Machine weight: 2,200 kg

Condition: new, FC120 ZK flat finishing machines were developed thinking in simplicity of operation whenever flat bars, rectangular tubes or flat elements need to be belt finished or polished. These machine enable the work up to 120 mm width with a range of 3 possible combinations of belt heads and brushes. FC120 ZK combines the abrasive belt head (Z) with an abrasive brush (K). Abrasive belt head: Finishing and removing imperfections of square of rectangular tubes, flat bars or any flat component. Abrasive brush head: Smooth finishing after belt grinding operation with non-woven brush. Square or rectangular tube finishing: High quality of surface finishing on stainless steel tubes, tube after tube - also flat bars finishing. Quick abrasive belt replacement: Tool-free abrasive belt replacement. Fast and easy belt change in few seconds. Itodpfjd Ix I Ajx Acpjn NS Máquinas can supply different conveyor solutions in order to grind small items. Technical Details - FC120 ZK Working capacity (Ø mm) 120x120 No. belt stations (Z) 1-2 No. brush stations (K) 0-1 Abrasive belt dimensions (mm) 120x1850 Abrasive brush dimensions (mm) 120xØ200 Abrasive belt speed (m/s) 20 Abrasive brush speed (m/s) 15 Feeding speed (m/m) 12 Abrasive belts motor per head (kW) 3 Abrasive brush motor per head (kW) 2.2 Feeding motor (kW) 0.25 Total power (kW) 5.5 (ZK) Consumption (A) 12 (ZK) Dust extraction connection per head (Ømm) 80 Dimensions (mm) 1450x800x1800 (ZK) Weight (kg) 500 (ZK)

Condition: new, Cesurbend CNC Tube and Pipe Bending Machine PBNC-51 A Technical Specifications Max. Tube Diameter (Mild Steel): 51 mm Max. Tube Wall Thickness (mm): 3 Isdjxvzr Repfx Acpstn Max. Bending Angle (°): 190 Tube Bending Speed (rpm): 7–10 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Tube Length (mm): 4000 Bending Motor Power (kW): 5.5 Hydraulic Motor Power (kW): 3 Machine Width (mm): 1300 Machine Length (mm): 5750 Machine Height (mm): 1500 Machine Weight (kg): 2000 Features • On our standard NC machines, distance and rotation after bending are handled via operator assistance and parallelism devices. • Using our machines equipped with the NC Car System, you can monitor bend progress and rotational positions, enabling faster and error-free bending.

Condition: new, Cesurbend Mandrel Bending Machine/Tube Bending Machine PBNC-65 A Technical Specifications Max. tube diameter (mild steel) 63 mm Max. wall thickness (mm) 3 Max. bending angle (°) 190 Tube bending speed (d/min) 7-10 Max. hydraulic pressure (bar) 200 Max. bending radius (mm) 250 Min. bending radius (mm) 45 Tube length (mm) 4000 Bending tolerances (mm) ±0.25 mm Bending motor power (kW) 7.5 Hydraulic motor power (kW) 4 Oil tank capacity (l) 50 Machine width (mm) 1500 Machine length (mm) 6200 Iodsxvzt Uspfx Acpetn Machine height (mm) 1500 Machine weight (kg) 2000 Features • The machine is equipped with 5 cylinders • On our standard NC machines, positioning and rotation after bending are achieved using the operator assistance and parallelism device. • You can bend faster and error-free by monitoring the progress and rotational positions of bends carried out with our machines equipped with an NC Car System.

Condition: new, Cesurbend Mandrel Bending Machine/Tube Bending Machine PBNC-90 A Technical Specifications Max. Tube Diameter (mild steel): 90 mm Max. Tube Wall Thickness (mm): 4 Max. Bending Angle (°): 190 Tube Bending Rate (d/min): 3-6 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Tube Loading Length (mm): 3000 Bending Motor Power (kW): 15 Hydraulic Motor Power (kW): 5.5 Machine Width (mm): 1400 Machine Length (mm): 4500 Machine Height (mm): 1600 Machine Weight (kg): 3000 Features • On our standard NC machines, the distance and rotation after bending are achieved using the operator assistance and parallelism device. Itodexvzuropfx Acpon • You can bend more quickly and accurately by monitoring the progress and rotational positions of the bends carried out with our machines equipped with the NC Car System.