Used Plaster Worm for sale (365)

Condition: excellent (used), Year of construction: 2013, LAMELLAR - CASE CLAMP GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: Case joints. - Counter-pressure surfaces (side pressure wall, base) are 40 mm thick, coated, continuous support plates - Electrically operated adjustment of both press beams via precision trapezoidal-thread spindles (with increased lead and concentricity accuracy) and high-performance running nuts with grease reservoir. - Clamping is performed electrically using two separate worm gear motors (2 x 0.75 kW) - Pressing force: 2000 daN (kg) per press beam. - The pressing force of the press beam is electronically regulated and set via frequency converter, thus torque transmission is completely wear-free. - Pressing and adjustment speed: 25 mm/sec. - Very simple operation via 6 separate push buttons; 6 movement operations can be selected via the controller. - Freely adjustable pressing time preselection with automatic opening: 0-30 min (switchable to seconds or hours). - Working height/feeding height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm; Height min: 150 mm, max: 1400 mm. Depth: 700 mm 1 selector switch for variable pressing force: 1000 / 1500 / 2000 daN (kg) Machine No. 380.324 Tedew Tdymepfx Aacjd 400V, 3Ph, 50Hz (2.5 kVA, 16 A) Set of machine feet for working height 500 mm Machine used: Year of construction: 2013, fully overhauled by Ganner, 6-month parts warranty Special price: ex-stock 54634 Bitburg - immediately available -

Condition: excellent (used), max. wheel diameter 350 mm gear width 400 mm max. module 15 Tedpfxjxqrhxe Aacjd min. module 0,15 Control Klingelnberg workpiece weight 300 kg ical angle 0 - 90 ° centre distance 1000 mm weight of the machine ca. 1,9 t dimensions of the machine ca. 2,3 x 1,8 x 2,4 m Fully automatic CNC-controlled gear measuring center for spur gears and other gears depending on the software. Equipment for internal gears. Software: - Spur gear, hob measuring, worm checking

Condition: as good as new (ex-display), centre height 130 mm spindle bore 18 mm ratio 40:1 Todpfxsuvd Axj Aacod swivellable - 10° bis 90° ° groove width 16 / 18 mm weight 35 kg dimensions of the machine ca. 0,5 x 0,25 x 0,25 m Unused semi-universal dividing set: - Spindle in precision tapered roller bearings - Phosphor bronze worm wheel, helix Cr-NI steel, hardened and ground - Translation disengageable for direct sharing - each division 2 to 50 and many divisions to 380 accessories: Tailstock, 2 part washers, centering point, driver and chuck flange Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details: max. wheel diameter 2-45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 mm Control Fanuc 18i-MB weight of the machine ca. 2,2 t dimensions of the machine ca. 2100 x 1440 x 1700 m Additional information: The combined CNC gear hobbing and worm milling machine KOEPFER MZ 120 is characterized by its flexible usability and is used in the small module area. Just by swiveling the milling spindle from the horizontal to the vertical position and selecting the corresponding operating mode of the CNC control, the worm milling machine becomes a gear hobbing machine and vice versa. CNC control Fanuc 18i-MB (Dialog/ISO) CNC axes = X-axis plunge axis Z-axis longitudinal axis C-axis workpiece spindle B-axis tool spindle V-axis loader axis longitudinal A-axis swivel axis tool spindle head (included as an option) Y-axis shift axis (included as an option) With the following production programs: Worm milling Hobbing Worm hobbing Tjdpjw Rmaksfx Aacsd Bevel gear and spur gear milling Bevel gear hobbing Milling cycles = straight, oblique, crowned toothing, radial, radial-axial, co- and counter-rotating milling, roughing, finishing, worm gears, straight-toothed bevel gears, face gearing (option only in the partial process) Worms [Equipment] Coolant tank 300 liters KF with LNS Turbo MS 250 Chip conveyor, built in 2021!!! Kraft and Bauer fire extinguishing system Spiral conveyor Machine documentation [Technical data] Workpieces: Workpiece diameter 2-45 mm Max. workpiece length 250 mm Tooth length 150 mm Max. module in steel= 1 mm (gear hobbing) 1.5 mm (worm milling) 0.5 mm (bevel gear hobbing) Tools: Cutter diameter= 16-32 mm (gear hobbing) 40-63 mm (worm milling) Machine: Max. setting angle of milling head= +/- 45° (gear hobbing) +/- 30° (worm milling) Shift travel= 34 mm (manual adjustment) 34 mm (CNC axis) Collet/retraction mandrel W 20 Max. speed of workpiece spindle 770 rpm. Milling spindle drive 0.55 kW Max. milling spindle speed 8000 rpm Axis drives = X-axis (plunging) / travel 80 mm via CNC Z-axis (longitudinal feed) / travel 190 mm via CNC C-axis (workpiece axis) via CNC Rapid traverse = X-axis 6000 mm/min. Z-axis 6000 mm/min. Hydraulic unit 0.37 kW

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, Laska Mixer Grinder Twin paddle mix action Hopper capacity 1,000 litres Rear discharge door to empty mixed product Cross feed worm in the bottom of the to feed product into the grinding head Todpfxjxguvde Aacjd 3 plate - 2 knife mince head set up - 200 mm diameter mince plates Can be supplied with a tote bin hoist With top safety cover With mince head safety hood Main Motor 35 Kw

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints Tedsw Nafkjpfx Aacsd - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: refurbished (used), Refurbished Landert motor Manufacturer: Landert Motoren AG Bülach Type 132S-RFA4A, 1450/1750 rpm, 400V, 50/60 Hz, 5.5 kW (Grinding worm drive) Todpew Rn Hxsfx Aaced All technical data subject to errors and omissions. Price on request Sale exclusively within EU countries.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Gear grinding machine Gleason Pfauter G320 CNC + Promot Automation - Gear grinding machine Manufacturer: Gleason Pfauter G320 + with Promot Automation handling unit Type: G 320 Control unit: Siemens 840 Incl. control panel Year of construction: 10/2001 Module: 0.5-7.0 Min. workpiece diameter: 10 mm Max. workpiece diameter: 380 mm Number of teeth: 10-600 Vertical slide stroke “Z“: 200 mm Horizontal slide stroke “X“: 230 mm Tangential slide stroke (SHIFTING) “Y“: 135 mm Swivel angle of clamping head “A“: +-45° Stroke – tailstock center [ ]: 125mm Tangential slide stroke – dressing [ ]: “V“ 180mm Radial slide stroke – dressing [ ]: “U“ 110mm Rotation speed – grinding wheel in processing [ ]: 3000rpm max - infinitely variable Edge speed – linear axes [ ]: 10000 mm/min Max. table rotation speed [ ]: 240 RPM Table resolution [ ]: 0.001° Processing feeds [ ]: infinitely variable Working feeds [ ]: infinitely variable Grinding wheel dimensions Min/Max. diameter [ ]: 270/350mm Width [ ]: 104mm/max. Bore [ ]: 160mm System weight [weight]: 11,500kg Accessories [accessories]: as per photos +Promot-Automation +Conveyor belt +Cooling belt system +Hydraulic unit Space requirement for machine [needed space ]approx. (W x D x H): 3.7m x 2.4m x 2.75m Space requirement for Promot Automation [needed space ]approx. (W x D x H): 4.5m x 1.6m x 4.0m Complete documentation is available. Functionality and machine features: Cylinder grinding machine with 8 numerically controlled axes for machining gears with straight and helical gears that can be produced by rolling, including a dressable worm profile disk. Linear and rotary main axes are designed to be hydrostatic. High-performance machine for finishing cylindrical gears with straight or helical involute teeth. Inspection under power can be arranged at short notice. If you have any further questions, please do not hesitate to contact us. Price, ex warehouse here plus VAT Condition: good - ready for demonstration Delivery: ex warehouse - as viewed Payment: net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Other machines and systems available from stock - please enquire. We look forward to hearing from you. Tedpfx Aasu Sqgqsced

Condition: good (used), Bushing, motor flange/worm connection, sleeve, connecting sleeve -Socket: for motor flange/worm connection -Type: Shaft Ø 60 mm -Quantity: 1x sleeve available Tedpfjwzr I Ajx Aaced -Price: per piece -Dimensions total: Ø 120 x 220 mm -Weight: 13.4 kg/piece

Condition: as good as new (ex-display), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Other similar roller tables also available. Tedpfx Aet E Nw Toacsd

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 200 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 15 m/min, controller manufacturer: LNC-Control, workpiece length (max.): 3,200 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 200 mm, workpiece weight (max.): 1,500 kg, Equipment: rotational speed infinitely variable, BudgeCaft is a manufacturer of high-quality CNC machines. We design, develop, assemble, and sell CNC machines for businesses and industrial manufacturers. BEST DEAL Transport, installation, machine instruction, and CAD/CAM training are provided by Danmar Machines (languages: Dutch, English, French, Italian, or German). Additional charges may apply depending on the location. • Starter tool kit • ISO30 • ER32/ER40 collets • Vacuum pump • ATC spindle CC 9 kW • 1 year of online support/helpdesk for CAD/software (English) • 12-month standard factory warranty Suitable for machining: wood, panel material, acrylic, PVC, aluminum, foam, multiplex board, plasterboard, rock wool, plastics, etc. - 9 kW ATC spindle ISO30 ER32/ER40 - LNC MW control system - Leadshine servo motors - Tool change magazine - Vacuum table - Vacuum pump Todpswc Uadjfx Aacsd - Powerful side channel blower, air pump - Pegasus CAD/CAM software Custom configurations available Working area dimensions:  1300 x 2600mm € 31,800  1600 x 3200mm € 37,500  2100 x 3200mm € 41,600 Linear tool magazine automatic changer: 10-12-16 position tool changers, automatic tool change during operation. Working area X-axis: 2600-3200 mm Working area Y-axis: 1300-1600-2100 mm Z-axis stroke: 200 mm Gantry construction: Yes Spindle motor: 9 kW servo motor (ATC spindle) Speed: 1,000-24,000 rpm Axis travel X-axis: 50 m/min Axis travel Y-axis: 50 m/min Axis travel Z-axis: 15 m/min Tool holder: ISO30-ER32-ER40 Software: Pegasus PWoodEntry Vacuum pump: included

Condition: used, Miter left 60° + right 45° Hydropneumatic control of the saw unit Electropneumatic material feed unit Smooth-running, high-performance worm drive with a large gear ratio, integrated into a robust cast housing for optimal cutting results Clamping fixture with double clamping arm for burr-minimized cuts, additionally featuring a lateral quick-shift for miter changes Tedpfexfr Nlex Aacsd Precision prism guide for the gearbox head, laterally adjustable Especially stable base frame with integrated automatic cooling and large chip drawer CNC control: By entering various parameters such as quantity and material length, the CNC version is the ideal solution to optimize workflows.

Condition: good (used), Peter Wolters AC500 lapping machine TECHNICAL DATA AND SCOPE OF SUPPLY TECHNICAL DATA Rolling device size: 42 TS 7/14 Working disk diameter: 415 mm Ring width: 54 mm Tedpstxitvefx Aacod Working disk thickness: 50 mm Possible wear of the disks to approx.: 20 mm Number of rotor disks: 14 Drive data: 380 V / 50 Hz Upper disk drive: 1.0 / 1.4 kW Worm gear motor: 56 / 112 rpm Lower disk drive: 1.0 / 1.4 kW Worm gear motor: 500 / 100 rpm Workpiece drive: 0.5 / 0.7 / 0.9 kW 3-pole worm gear motor: 6 / 18 / 36 rpm Tilt arm drive: 0.25 kW Digital load adjustment of the upper work disk: 0-250 daN Connection data Electrical connection: 5.0 kW Compressed air connection: 5-7 bar Compressed air consumption: Approx. 8 Nl/min OFFER SCOPE U.A: (list not exhaustive): Peter Wolters AC 500 lapping machine / fine grinding machine 1 inverter per motor documentation Exact scope of offer according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: ready for operation (used), Year of construction: 1966, functionality: fully functional, machine/vehicle number: 8588, overall weight: 400 kg, rotational speed (min.): 3,120 rpm, rotational speed (max.): 3,860 rpm, height adjustment type: mechanical, grinding diameter: 200 mm, disc diameter: 150 mm, distance table to spindle center: 400 mm, Tool Grinding Machine Used Cutting Wheel Sharpening Machine, Grinding Machine, Cutting Wheel Sharpener Lorenz Type MS 80, year 1966, without coolant system, particularly suitable for sharpening rack cutter wheels (cutting wheels), maximum rack wheel diameter to be ground approx. 200 mm, maximum stroke of the grinding spindle carriage approx. 50 mm, clamping table surface approx. 600 x 245 mm, manual longitudinal table travel 250 mm, manual vertical table adjustment 275 mm, with coarse and fine feed, max. usable grinding wheel diameter 150 mm. Includes the MSV 75 cutting wheel sharpening device for producing a conical surface grind on straight-cut cutter wheels. Driven by a worm gear motor. Todpfsffybgjx Aacod Supplied with operating manual for this high-performance special machine for sharpening cutter wheels. Cutting wheel offered at a special price. Viewing under power is possible by prior appointment. Price on request / Special price All technical specifications are subject to errors/typing mistakes. Sale is strictly limited to EU countries.

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, table length: 1,900 mm, table width: 1,100 mm, spindle speed (max.): 6,000 rpm, table load: 4,000 kg, position of the milling head: Vertikal, torque: 1,356 Nm, spindle nose: SK 50 - DIN 69871/A, Equipment: rotational speed infinitely variable, BRAND NEW GANTRY MILLING MACHINE Control and Motors: HEIDENHAIN TNC 640 Digital Path Control HEIDENHAIN Package (motors, measuring systems, electronic handwheel) Spindle Performance: Maximum spindle motor power: 30 kW Tedpoq Ixc Tjfx Aacod ICS: Internal coolant supply, 70 bar Additional Equipment: Tool changer with double gripper, 60 positions Dual worm conveyor (longitudinal) Hinged belt swarf conveyor (transversal) Preparation for 4th axis (rotary table) Full enclosure, closed at the top Accuracies: Positioning accuracy: ± 0.025 mm Repeatability: ± 0.020 mm Only inquiries from Germany will be answered.

Condition: excellent (used), Hydraulic drive variator with motor 2.2 kW, 1430 rpm, with planetary reduction gear for speed reduction, electric adjustment via worm gear motor Tsdpfxjlxzhto Aaced

Condition: used, operating hours: 843 h, mileage: 7,536 km, power: 75 kW (101.97 HP), first registration: 10/2010, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 505 kg, empty load weight: 2,995 kg, next inspection (TÜV): 10/2025, wheelbase: 1,850 mm, brakes: other, driver cabin: day cab, gearing type: other, emission class: euro5, suspension: steel, loading space width: 1,250 mm, loading space length: 1,750 mm, loading space height: 300 mm, number of seats: 2, maximum speed: 50 km/h, Equipment: air conditioning, all wheel drive, cabin, onboard computer, power assisted steering, soot filter, * German vehicle * 1st hand * Condition, see photos * several times available * Original ONLY 7,636 km * only 843 operating hours * Hako front brush type TCKM * Sweeping width: 1,500 mm * KIF type combi rear-mounted spreader * KIF type TREMO snow plow available at extra cost * Sweeping width: 1,700 mm * With a width of only 1.32 meters, the Tremo is the ideal compact implement carrier for pedestrian zones, narrow alleys, courtyard entrances, etc... * 4x4 all-wheel drive with crawling gear * Four-wheel steering switchable - turning circle only 3.10 meters * Comfort cab with 2 seats * 50 km/h approval * Municipal hydraulics + rear hydraulics * VW industrial engine * Front lift * Body dimensions: L=1,750 x W=1,250 x H=300 mm * Winter service lighting * Worm drive * Three-way tipper with steel floor and aluminum loading flaps * EasyDrive (hydrostatic drive) (SN) * Windshield heating * Rotating beacons * Joystick control Tsdpfx Aajxl Sprscjd * Air conditioning * Wheelbase: 1,850 mm * Working lights * GVW: 3,500 kg * Unladen weight: 2,995 kg * Payload: 505 kg * ... * Various attachments for year-round use available at extra cost * Dücker Uni Arm UNA200 * Schmidt delineator washing system RPS-H for front attachment + 1,000 liter water tank If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, Rotary Table WMW Type D 315 k Serial No.: 10930 Table diameter: 315 mm Table height: 135 mm Transmission ratio: 90 : 1 - Hand crank with index plate and lever - Scale ring for reading at the hand crank - Readable degree scale on the rotary table - Swivelling worm for direct indexing Tjdpfsxf Uytox Aacsd - Clamping via clamping lever - 14 mm T-slots in the table plate - Built-in index plate 23-28-33-42-51-61 Weight: 85 kg

Condition: good (used), Year of construction: 2006, Hurco machining center VMX 24 i IKZ chip worm spindle mount Sk 40 Tjdpfx Aeudb I Teacsd

Condition: used, Year of construction: 1995, Overview This grinder, type: Seydelmann AD 114 was built in 1995 in Germany. The machine is in good conditon and ready to use. Technical Details 114 mm hole plate diameter 2 speed working worm 2 speed feeding worm Installed power: 9 kW Voltage: 400 V, 50 Hz Scope of delivery grinder | Seydelmann | AD 114 | 1995 Todpsxcb Huefx Aacsd

Condition: new, cutting diameter 170 mm dimensions of saw-band 2080 x 20 x 0,9 mm table height 880 mm cutting speed 40 + 80 m/min 170 mm 125 mm 150 x 190 mm Tedpog Trvrjfx Aacsd 95 x 120 mm total power requirement 1,1 kW weight of the machine ca. 0,24 t Dimensions (LxWxH) 870 x 1.550 x 1.740 mm mm This metal band saw comes with a closed worm gear. It also has hydraulic pressure control and a base frame that can be rotated through 45 degrees. Other features include emergency stop, the complete cooling system, the factory base frame, automatic switch-off and the quick-release device.

Condition: used, operating hours: 1,018 h, mileage: 10,999 km, power: 75 kW (101.97 HP), first registration: 11/2010, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 505 kg, empty load weight: 2,995 kg, next inspection (TÜV): 10/2025, wheelbase: 1,850 mm, brakes: other, driver cabin: day cab, gearing type: other, emission class: euro5, suspension: steel, loading space width: 1,250 mm, loading space length: 1,750 mm, loading space height: 300 mm, number of seats: 2, maximum speed: 50 km/h, Equipment: air conditioning, all wheel drive, cabin, onboard computer, power assisted steering, soot filter, * German vehicle * 1st hand * available in multiple copies * Condition, see photos * Original ONLY 10,999 km * only 1,018 operating hours * Hako front broom type TCKM * Three-way tipper with steel floor and aluminum loading flaps * KIF type combi rear-mounted spreader * KIF snow plow type TREMO available for an additional charge * Sweeping width: 1,700 mm * Sweeping width: 1,500 mm * Dimensions: L=1,750 x W=1,250 x H=300 mm * EasyDrive (hydrostatic drive) (SN) * Four-wheel steering can be switched on - turning circle only 3.10 meters * With a width of just 1.32 meters, the Tremo is the ideal compact implement carrier for pedestrian zones, narrow alleys, yard entrances, etc... * Windscreen heating * Joystick control * Front lift * 4x4 all-wheel drive with crawler gear * Air conditioning * VW industrial engine * Comfort cabin with 2 seats * Municipal hydraulics + rear hydraulics * Rotating beacons * Worm drive * 50 km/h approval * Winter service lighting * Work lights * Wheelbase: 1,850 mm * GVW: 3,500 kg * Empty weight 2,510 kg * Payload: 490 kg * ... * Various attachments for year-round use available for an additional charge * Schmidt guide post washing system RPS-H for front attachment + 1,000 liter water tank * Dücker Uni Arm UNA200 If you require a new TÜV approval, we will be happy to provide you with an offer from our partner workshops. Todpfx Aaexl Spxecsd Our offer is generally WITHOUT a new TÜV approval, without new DGUV, without new SP, without new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false impressions about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 15 - 70 U/min total power requirement 1,8/2,2 kW weight of the machine ca. 0,71 t dimensions of the machine ca. 1,9 x 1,45 x 2,1 m ACTION PRICE!!! High-performance vertical circular saw hydropneumatic fully automatic.(20192) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system Tjdpfxed Iin Hj Aacsd · Large chip drawer · Chip removal brush in the saw blade protective hood MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: used, operating hours: 6,352 h, mileage: 9,769 km, power: 75 kW (101.97 HP), first registration: 11/2010, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 930 kg, empty load weight: 2,570 kg, next inspection (TÜV): 10/2025, wheelbase: 1,850 mm, brakes: other, driver cabin: day cab, gearing type: other, emission class: euro5, suspension: steel, loading space width: 1,250 mm, loading space length: 1,750 mm, loading space height: 300 mm, number of seats: 2, maximum speed: 50 km/h, Equipment: air conditioning, all wheel drive, cabin, onboard computer, power assisted steering, soot filter, * German vehicle * 1st hand * Condition, see photos * several times available * Original ONLY 9,769 km * 6352 operating hours * Hako front brush type TCKM * Sweeping width: 1,500 mm * KIF type combi rear-mounted spreader * KIF type TREMO snow plow available at extra cost * Sweeping width: 1,700 mm * Four-wheel steering switchable - turning circle only 3.10 meters * With a width of only 1.32 meters, the Tremo is the ideal compact implement carrier for pedestrian zones, narrow alleys, courtyard entrances, etc... * Three-way tipper with steel floor and aluminum loading flaps * EasyDrive (hydrostatic drive) (SN) * Body dimensions: L=1,750 x W=1,250 x H=300 mm * 4x4 all-wheel drive with crawling gear * Comfort cab with 2 seats * Windshield heating * Joystick control * Air conditioning * 50 km/h approval * Rotating beacons * Worm drive * Winter service lighting * Front lift * Municipal hydraulics + rear hydraulics * VW industrial engine * Working lights * Wheelbase: 1,850 mm * GVW: 3,500 kg * Unladen weight: 2,510 kg * Payload: 930 kg * ... * Various attachments for year-round use available at extra cost * Schmidt delineator washing system RPS-H for front attachment + 1,000 liter water tank * Dücker Uni Arm UNA200 If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Tjdpoxl Sp Esfx Aaced Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 130 x 80 mm capacity 45 degrees: round 100 mm capacity 45 degrees: square 85 mm capacity 60 degrees: flat 90 x 80 mm clamping range 130 mm turning speeds 30 / 60 U/min dimensions of saw-blade 350 x 32 x 2,5 mm total power requirement 1,1 / 2,2 kW weight of the machine ca. 0,22 t dimensions of the machine ca. 1200 x 860 x 900 m Manual miter saw for miter cuts from 45° left to 45° right. Steel worm wheel with double ball bearings Saw blade shaft mounted on eccentric made of spheroidal cast iron Bronze wheel with wedge and conical coupling to ensure maximum power transmission to the steel worm wheel Vice with adjustable guide bars Tedpfx Aefmck Hjacjd Adjustable anti-cutting burr device (enables burr-free cutting) Length stop Double return springs Safety main switch Emergency stop button Speed switch Electric coolant pump for lubrication and cooling of the saw blade (attachment a micro spray device possible) Motor 1.5/1.8 kW - 400 volts Optional base frame 361 euros