Used Plate Bending Machine for sale (71,881)

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 Djdpfx Aswk Rlxeizewd max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 220692, Equipment: emergency stop, sheet width 1550 mm plate thickness 6 mm diameter of upper rolls 228 mm Dwedpfx Aezxt Txeized drive elektronisch zwei angetri

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, actuation type: electric, roller diameter: 90 mm, working width: 1,270 mm, sheet thickness (max.): 3 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), input voltage: 400 V, rotational speed (max.): 6 rpm, type of input current: three-phase, Equipment: cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, sheet metal roll bending machine BOLUK BM 1270 x 90 - 2.5 mm NEW! for sale. manufacturer: BOLUK 1270X90mm Dwjdpfx Asxhub Asized year of manufacture: 2024 Bending Length: 1270 mm Bending capacity: 2.5 mm Roller diameter 90 mm - SAE 1050 certified high tensile steel rollers - Wire grooves at the ends of the rollers (4/6/9) mm - Manually adjustable rear roller - Mobile control panel with foot pedal - Precision bending with brake motor - Conical bending device - Manually foldable end - Cast iron main frames Bending speed 6m / min Motor power 1.1 kW 50Hz 380v Wire groove diameter 4/7/10 mm Machine dimensions 1850x700x1200 mm Weight 520 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Working width: approx. 700 mm MACHINE DETAILS Dimensions, length: 3,000 mm Dimensions, width: 2,000 mm Dimensions, height: 2,400 mm Dwedpfx Ais Adu Nvjzod Weight: 2,000 kg

Condition: new, sheet width 2070 mm Dwodpovn U H Asfx Aized plate thickness 10 mm pre-bending 8 mm total power requirement 7 kW weight of the machine ca. 5 t dimensions of the machine ca. 4050 x 1470 x 1550 mm

Condition: used, sheet width 3000 mm plate thickness 6 mm pre-bending 4 roll diameter 205 mm total power requirement 5 kW weight of the machine ca. 3,7 t dimensions of the machine ca. 4,0 x 1,4 x 1, 5 m Roundo 3-roll plate bending machine, featuring: - Hydraulic drop-end bearing and remote control - Conical bending attachment: a device for rolling Dodpfx Aj Ahkineizswd cones and funnels.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, A NELA plate bending machine (printing plate bending device) is a professional bending device for offset printing plates, manufactured by the German company NELA Brüder Neumeister GmbH. These systems precisely shape printing plates into the required form, ensuring a perfect fit into the cylinders of offset printing presses. Compatibility: NELA manufactures bending devices specifically tailored to the requirements of major printing press manufacturers. Models like the HD/Nela SM 102 B, which are optimized for Heidelberg Speedmaster (SM 52, SM 74, SM 102) as well as XL machines, are particularly common. A Heidelberg NELA plate punch (also called a printing plate punch, plate perforator, or hole punch) is an essential precision tool in prepress. It is used to punch register holes or cutouts precisely into offset printing plates. This ensures flawless clamping and perfect alignment (register) of the plates in Heidelberg printing presses. Djdpfxez It Sko Aizewd Compatibility: Specifically designed for Heidelberg machine series such as the Speedmaster (SM) 52, 74, and 102. Hole spacing: Flexible configurations with variable hole spacings, such as 425 mm and 780 mm (for Autoplate systems), are common.

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, control type: manual, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller diameter: 90 mm, working width: 1,550 mm, roller height adjustment: 110 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, overall weight: 600 kg, total length: 2,300 mm, total width: 700 mm, total height: 1,150 mm, power: 1.1 kW (1.50 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, AKYAPAK AS 1550x90 sheet metal bending machine 1550mm x 2.5 mm, 3 rollers /ct2289/ Electric, pedal-operated rolling machine. Strong, robust construction. The upper roller can be rotated to remove the workpiece Convenient to use, suitable for workshops and industry Manufacturer: AKYAPAK AS 1550X90mm Year of manufacture: 2002 Bending Length: 1550 mm Bending capacity: 2.5 mm Roller diameter 90 mm - SAE 1050 certified high tensile steel rollers - Wire grooves at the ends of the rollers (4/6/9) mm - Motorized adjustable rear roller - Mobile control panel with foot pedal - Precision bending with brake motor - Conical bending device Dodpfsxmvgksx Aizowd - Manual folding end - Cast iron main frames Bending speed 6m / min Motor power 1.1 kW 50Hz 380v Wire groove diameter 4/7/10 mm Machine dimensions 2400x800x1200 mm Weight 600 kg

Condition: used, plate width 1020 mm plate thickness 4 mm Djdez N Hwqepfx Aizjwd diameter of upper rolls 110 mm total power requirement 2,2 kW weight of the machine ca. 900 Kg dimensions of the machine ca. 2,1 x 0,7 x 1,2 m Fasti three-roll plate bending machine / plate rolling machine In excellent condition. The machine was completely overhauled in 2016.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For sale and available immediately: Used PICOT rolling machine Year: 2019 Type: RCS235-30 3 motorized rollers Maximum length: 3100 mm Dedpfjz D Suvjx Aizewd Maximum rolling thickness: 8 mm Maximum nibbling thickness: 6 mm Roller diameter: 235 mm Digital roller position display

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 29 h, roller diameter: 90 mm, sheet thickness steel (max.): 2 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), working length: 1,270 mm, For sale is a like-new circular bending machine with only 29 operating hours! TECHNICAL DETAILS Working area Working length: 1,270 mm Sheet thickness at 450 N/mm²: max. 2.5 mm Sheet thickness at 700 N/mm²: max. 1.5 mm Sheet thickness for conical bending of steel sheets: 2 mm Roller diameter: 90 mm Roller speed: 6 m/min Diameter of feed grooves: 4 / 6 / 9 mm MACHINE DETAILS Dodpfx Aj Aiuyxeizswd Motor power, main drive: 1.1 kW Dimensions & Weight Dimensions (L × W × H): 1,850 × 700 × 1,200 mm Weight: 520 kg EQUIPMENT 3-roller circular bending machine with asymmetrical roller arrangement Sturdy machine frame made of spheroidal cast iron Induction-hardened rollers, also suitable for processing stainless steel Main motor with braking system for precise bending Swiveling top roller with eccentric closure for easy workpiece removal Wire feed grooves on the lower and rear rollers Conical bending device Manual adjustment of the rear roller Separate mobile control panel with foot switch for left/right operation Emergency stop safety cord Side cover Operating manual

Condition: new, Year of construction: 2026, sheet width 3100 mm plate thickness 9 mm pre-bending 6 mm diameter of upper rolls 220 mm diameter of lower rolls 200 mm side roll diameter 170 mm min. dia. 250 mm roll speed 6 m/min total power requirement 10,3 kW weight of the machine ca. 4651 kg dimensions of the machine ca. 4915 x 1120 x 1235 mm Features - Machines include the following DAVI standard specification: The components of the machine structure (machine stand, frame and swivel bearings, etc.) have been calculated and designed to withstand the loads required for the applications and performance levels. The robust and heavy-duty machine construction absorbs the loads generated during the bending process without transferring them to the foundation. - High-quality surface finish: For forming delicate surfaces and/or soft materials without leaving marks Hydraulic-mechanical parallelism system, supported by electronics for fine-tuning. There are two INDEPENDENT & SYMMETRICAL hydraulic circuits for the left and right cylinders of each roller. The oil flow is regulated by two DOUBLE PUMPS, which are mounted on the same motor shaft and are fully synchronised. The two symmetrical hydraulic circuits move the cylinders and supply the rollers with the SAME amount of oil in a fully synchronised manner. Electronic control is activated only for extremely precise fine-tuning. - Smooth transmission of the drive Both the hydraulic motors and the gearboxes (top and bottom) can follow the deflection of the roll without load when bending narrow sheets. This ensures perfectly symmetrical deflection of the rolls under load. This system also allows the rollers to deflect freely, without the risk of breakage under excessive load. - ‘Roll-by-Wire’© digital technology Since 2004, DAVI has revolutionised the way sheet metal rollers are wired (similar to ‘fly-by-wire’ technology in the aerospace, FMS and automotive industries) and introduced ‘Roll-by-Wire’ technology. This allows the entire control system of the roller to be controlled via digital signals rather than, as was previously the case, via numerous relays and contacts. Digital technology is much faster and more reliable. Action Benefit Reduction in the number -> Reduction in potential of components component failures Very compact design -> Improved accessibility for maintenance work Improved accessibility for -> Damaged parts can be identified Djdpfez Dxpmjx Aizowd maintenance work more easily More reliable -> Greater accuracy thanks to the use of ‘digital signals’ Permanent lubrication technology The lever-arm feed system eliminates all linear friction during the movement of the side rollers, as the roller support arms, which house the bushings, rotate simply and smoothly around two large, strong pivot points made of alloy steel, ensuring precise and friction-free rotation. This guarantees reduced wear and safety during unlimited use. Further advantages of the lubrication-free lever-arm feed mechanism are: •NO daily maintenance required (lower operating costs). •More production time available. •The bearings are sealed to protect against scale, dust and rust - Hardened rollers •Excellent heat tre...

Condition: good (used), Year of construction: 2003, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings - Sturdy welded steel construction - Selectable bending speeds (2 settings) - Electro-hydraulic drop-end bearing for easy removal of rolled parts Dedpez N Hxhofx Aizewd - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) - Operating manual (PDF)

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: 2020-09-B970, High-quality compact bending machine Dynobend TM 02 – in top condition, including a large tool kit, for sale. Condition & Inspection • The machine was purchased new directly from the manufacturer Dynobend in 2021 and has been in our possession ever since. • It is used but in good condition (see photos for details). • Inspection is welcome: The bending machine is currently powered on and fully functional. After prior appointment, it can be inspected and demonstrated in operation. Application & Scope of Performance • Focus on solid material: The machine was used almost exclusively for bending solid material. It can also be used for bending pipes (with limited application areas). • Control & Programming: Up to 25 individual bending cycles can be programmed – extremely practical and absolutely sufficient for most applications. • Length stop: o The programmable length stop covers 0 to 1500 mm as standard. o By bending on both sides, workpieces up to 3000 mm can be processed. o Without a direct stop, lengths over 3000 mm are also possible without any problems. Extensive tool kit including additional equipment: • Numerous additional tools were manufactured for the standard tool kit to significantly expand the machine's range of applications (see photos). • The machine will only be sold together with the complete tool kit. Complete documentation available • The sale includes all important and legally relevant documents: • Original EC declaration of conformity (Directive 2006/42/EC, Annex II A) • Acceptance test report Dwodpfxoz Ny Rke Aizod • Original operating manual available • Invoices available • The price is ex works (EXW). • Dismantling, professional loading, and transport must be organized by the buyer or carried out by a commissioned freight forwarder. • Technical specifications according to the nameplate and available documents. Subject to prior sale.

Condition: used, Year of construction: 1999, sheet width 2050 mm Dodpsztfxisfx Aizswd plate thickness 4 mm total power requirement 3 kW weight of the machine ca. 2 t

Condition: new, Year of construction: 2023, neu 2023 9656 prompt, Zwischenverkauf v Türkei 2600 € 1 1 1050 mm 1 mm 56 mm 1400 mm 700 mm 1120 mm 185 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH Dwedpfx Aiewira Ujzod

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 5100 € Dedsy Dvlkspfx Aizjwd 98.43 € 1050 mm 2 mm 75 mm 1.5 kW 1610 mm 700 mm 1160 mm 385 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH OPTION (PRICE ON REQUEST): hardened rolls

Condition: new, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20.0 mm total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine * with driven top roller + bottom roller * stable welded construction - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) Dodpfx Ajxabkboizewd - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) + crowning - conical bending device - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing - operating instructions (PDF)

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 5700 € 110.01 € 1550 mm 1 mm 68 mm 1.5 kW 2110 mm 700 mm 1160 mm 400 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH Dodpfezx Hcgox Aizewd OPTION (PRICE ON REQUEST): hardened rolls

Condition: new, sheet width 1600 mm plate thickness 15,0 mm ST pre-bending 13,0 mm ST diameter of upper rolls 230 mm side roll diameter 210 mm diameter of lower rolls 190 mm total power requirement 7,5 kW weight of the machine ca. 4225 kg. dimensions of the machine ca. 4000 x 1300 x 1440 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing Dedpfjxabkhex Aizjwd - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 3100 mm plate thickness 8,0 mm ST pre-bending 6,0 mm ST diameter of upper rolls 230 mm side roll diameter 210 mm diameter of lower rolls 190 mm total power requirement 7,5 kW weight of the machine ca. 6.020 kg. dimensions of the machine ca. 5142 x 1390 x 1300 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers Dwsdpfxoxabm As Aizod - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 3100 mm plate thickness 16,0 mm ST pre-bending 20,0 mm ST diameter of upper rolls 360 mm side roll diameter 250 mm diameter of lower rolls 330 mm total power requirement 15,0 kW weight of the machine ca. 13.200 kg. Djdsxabzaopfx Aizewd dimensions of the machine ca. 5542 x 2100 x 1983 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 2100 mm plate thickness 8,0 mm ST pre-bending 6,0 mm ST diameter of upper rolls 190 mm side roll diameter 150 mm diameter of lower rolls 170 mm total power requirement 3,0 kW weight of the machine ca. 3.290 kg. dimensions of the machine ca. 4042 x 1380 x 1254 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel Dwodpfx Aijxab E Eszsd - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 4100 mm plate thickness 8,0 mm ST pre-bending 6,0 mm ST diameter of upper rolls 300 mm side roll diameter 210 mm diameter of lower rolls 270 mm total power requirement 7,5 kW weight of the machine ca. 9.930 kg. dimensions of the machine ca. 6532 x 1730 x 1489 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing Dwedpoxab Tcefx Aizsd - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 4100 mm plate thickness 13,0 mm ST pre-bending 10,0 mm ST diameter of upper rolls 360 mm side roll diameter 250 mm diameter of lower rolls 330 mm total power requirement 11,0 kW weight of the machine ca. 16.000 kg. Dwedpoxabuyjfx Aizod dimensions of the machine ca. 6542 x 1677 x 1900 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual