Used Plate Warmer for sale (10,590)

Condition: used, Bed plate 10ft x 5 ft x 4000kgs (approx) - Matched Pair Cgjdpfsywziujx An Nsu

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Cgsdpfsy Aubuex An Nou Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop

Condition: used, functionality: fully functional, machine/vehicle number: 7FBMF35-16267, Year of construction: 2013, operating hours: 6,500 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, Electric Forklift Truck – Toyota Year of manufacture: 2013 Technical data: • Model: Toyota 7FBMF30 • Load capacity: 3,000 kg • Drive: Electric (battery powered) • Mast type: Triplex with free lift Cgsdpfsw Hhwwex An Nou • Lift height: approx. 4,300 – 4,800 mm • Fork length: 1,070 mm (standard) • Tyres: Solid rubber • Cabin: Open design, optionally with driver protection roof • Condition: Used, serviced and fully functional

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm Cgsdpfxewnfz No An Nou with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: used, Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T Csdpfx Anewtc Hge Nsgu

Condition: good (used), Cast iron bed - Floor Plate Cgedpfx Ansh Auahs Neu Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Codpfowlhd Ujx An Negu Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Cgjdpfx Anjwlhflj Nju Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm Cedpfewk Rlxox An Nogu width: 65cm weight: 240kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, machine/vehicle number: 11/10575, working width: 3,000 mm, sheet thickness (max.): 16 mm, TECHNICAL DETAILS Sheet metal width: 3,000 mm Sheet metal thickness: 16 mm Cjdpfx Anezapqwj Njgu Control system: conventional MACHINE DETAILS Rated current: 63 A Voltage: 380 V

Condition: good (used), Top of the range plate washing system for high throughput. Has come from Wembley Football Stadium where it was washing plates for the hospitality areas. Lovely condition and with options Cgjdpfxsvd Eiyj An Nou

Year of construction: 2018, condition: used, This listing is for the Transmed Sahara 111 Maxitherm Blood warmer The unit is in full working condition and is ready for immediate use Cgedpfx Ansyuy Ipo Nju The Transmed Sahara III Maxitherm is a high-performance, dry-tempering system engineered specifically for the safe and efficient warming of blood products, plasma, and infusion solutions. Unlike traditional water baths, the Sahara III utilizes dry heat technology to eliminate the risk of waterborne contamination, making it a superior choice for sterile clinical and laboratory environments.

Condition: used, Year of construction: 2008, total length: 4,500 mm, total width: 1,700 mm, total height: 1,200 mm, Empty weight: 7.000 kg Cgodpfsxdigfex An Nsu - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 20830013 - Drive system: Teach-in - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 2 - Power [kW]: 11.0 - Max. sheet thickness [mm]: 16 - Max. working width [mm]: 2000 - Transport dimensions: 4500mm x 1700mm x 1200mm (l x w x h) - Transport weight [kg]: 7000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1998, control type: NC control, number of rollers: 4, roller (bottom) diameter: 540 mm, roller (top) diameter: 560 mm, side roll diameter: 420 mm, roller diameter: 440 mm, roller length: 3,100 mm, overall weight: 45,000 kg, total length: 8,700 mm, total width: 2,900 mm, total height: 3,075 mm, power: 81 kW (110.13 HP), 4 roll plate bender HAEUSLER - VRM-hy MACH-ID 9638 Make: HAEUSLER Type: VRM-hy Year: 1998 Cgodezbqqujpfx An Neu Smallest bending diameter 640 mm Pressing force against upper roll 5800 kN Conical bending attachment Central lubrication Equipped for change rolls Rolling width: 3100mm Rolling thickness 3x toproll Ø:50mm Rolling thickness 5x toproll Ø:60mm Rolling thickness prebending: 40mm Top Roll Ø: 560+440mm Bottom Roll Ø: 540mm Side roll Ø: 420mm Number of rolls: 4 Rolling speed: 0-6 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 500mm/min. Number of driven rolls: 2 Power: 81kW Length: 8700mm Width: 2900mm Height: 3075mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: repair required (used), Horizontal Plate Freezer Self Contained with built in compressor pack 6 station Csdpfxoy T Icmj An Nogu In cabinet, with doors Gram Compressor Hydraulic pack Condenser Controls Unit does need a service/overhaul. Supplied "as is"

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate -Mounting plate: with T-slots -Length: 3045 mm -Width: 1300 mm -Height: 770/970 mm Cgjdpfxjzbl Ihe An Nju -Groove width: 23 mm -Slot spacing: 265 mm -Dimensions: 1300/3045/H770 mm -Weight: 2300 kg

Condition: good (used), Clamping plate, plate field, welding table, welding table, clamping plate, scribing and measuring plate, measuring table, straightening plate, short-stroke heavy-duty cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine bending/straightening press -Mounting plate: Mounting plate with straightening press -Length: 3260 mm -Width: 1380 mm Cjdpfxezbhqxo An Nsgu -Piston diameter: Ø 63 mm -Stroke: 200 mm -Pressure force: t -Overall dimensions: 3260/1380/H1940 mm -Weight: 2820 kg

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate -Mounting plate: with T-slots -Length: 3050 mm -Width: 3000 mm -Height: 445 -Groove width: 28 mm Cedpfjzbhn Djx An Negu -Slot spacing: 275 mm -Dimensions: 3050/3000/H445 mm -Weight: 4000 kg

Condition: good (used), Clamping plate with T-slots, plate panel, welding table, T-slot plate, clamping plate, scribing and marking plate, measuring plate, measuring table, leveling plate, scribing plate Cgodpfxjza Sxws An Nou -Mounting plate: T-slot plate with solid base frame -Length: 3030 mm -Width: 3000 mm -Groove width: 25 mm -Dimensions: see photos -Overall dimensions: 3030/3000/H500 mm -Weight: 4500 kg

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, T-slot plate, clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -T-slot plate: clamping plate on solid base frame Cgjdpfx Ajv D Hkron Nsu -Length: 3200 mm -Width: 1625 mm -Groove width: 30 mm -Dimensions: see drawing in the photos -Dimensions total: 3200/1625/H720 mm -Weight: 2300 kg

Condition: good (used), Clamping plate with T-slots, T-slot plate, punching table, clamping plate, plate field, Cgsdpfx Aoyn Rc Ren Nou -T-slot plate: Mounting plate with T-slots -Clamping surface: 1295 x 2000 mm -Sheet height: 90 mm Solid, planed underside -Groove width: 27 mm -Dimensions: see drawing in the photos -Overall dimensions: 1295/2000/H90 mm -Weight: 1587 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, Darley hydraulic guillotine shear type GS 3116 working width 3050 mm max sheet thickness 16 mm Delem NC control type DAC 350 motorized backgauge automatic angle adjustment automatic cutting gap adjustment rear side equipped with transport conveyor Cgjdpfx Ansxpuips Nju

Condition: excellent (used), 4 off Insize Granite surface table dimensions 1000x630x140mm. Each one is mounted on an adjustable base. Available for 500€ each. All 4 for €1900 Cedpfx Ajy Igi Ujn Nsgu

Condition: good (used), Clamping plate, plate field, welding table, welding table, clamping plate, scribing and measuring plate, measuring table, straightening plate, short-stroke heavy-duty cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine bending/straightening press Csdpozakf Njfx An Nsgu -Mounting plate: Mounting plate with straightening press -Length: 4025 mm -Width: 1990 mm -Piston diameter: Ø 63 mm -Stroke: 110 mm -Pressure force: 20 t -Overall dimensions: 1990/4025/H1920 mm -Weight: 5060 kg

Condition: good (used), Year of construction: 1999, sheet width 3050 mm plate thickness 2.5 mm thickness at "Niro-steel" 1.5 mm no. of strokes max. 35 Hub/min cutting angle 2°10 Codpey U N H Aefx An Njgu table height 905 mm table width 390 mm back stop - adjustable ca. 750 mm Control konv. engine output 3.0 kW weight of the machine ca. 1750 kg range L-W-H 3730 x 2070 x 1400 mm New price approx. 45.000 euros (!!) Special price on request Equipment: - robust / motorized swing cut guillotine shears - Machine with electric material / backgauge * Traverse path approx. 750 mm (infinitely variable adjustment range) * analog position indicator * Manual adjustment from the front - unbreakable and torsion-free welded steel construction - Compact and clear machine construction - 1x hold-down beam - Integrated sheet holding system for thin sheet blanks - sheet/cut material removal at the front (operator side) - 1x side stop with mm scale - Extendable table extension (approx. 350 mm) - 1x freely movable foot switch - operating instructions