Used Platewriter 2000 for sale (7,547)

Condition: like new (used), Year of construction: 2015, functionality: fully functional, input voltage: 220 V, total length: 1,000 mm, total width: 1,000 mm, total height: 2,000 mm, compressed air connection: 6 bar, overall weight: 150 kg, type of cooling: air, Equipment: documentation/manual, balloon printing machine with a capacity of approximately 1,250 pieces per hour, capable of printing on one or two sides in a single color; the machine is ready for immediate use and can be collected in Dronten, the Netherlands. Bodez E Imkjpfx Aiweww

Condition: excellent (used), Year of construction: 2020, overall weight: 32,000 kg, total height: 450 mm, total length: 8,000 mm, total width: 4,000 mm, 10 units CFM Schiller Air Spring levelling system GRB 780 MD Load 7900 Kg each Air Spring Stiffness 770 N/mm Controller CFM LC 300 Very little used, new price EUR 200.000     Floorplate Length: 4000mm Floorplate Width: 2000mm Height: 450mm Bwjdpfx Ajzw Eyzeiwew No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Weight a plate approx.: 8000kg Number of matching pieces: 4 Length: 8000mm Width: 4000mm Height: 450mm Weight: 32000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2018, operating hours: 3,575 h, machine/vehicle number: 108.008.00.0055, total height: 3,417 mm, total length: 4,680 mm, total width: 4,471 mm, table width: 850 mm, table length: 2,100 mm, overall weight: 19,500 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 1,010 h, coolant supply: 20 bar, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Mikron VCE 2000 Pro * 3-axis machining center * X-axis travel: 2000 mm * Y-axis travel: 900 mm * Z-axis travel: 800 mm * Table size: 2100 × 850 mm Bwedjz Nh R Ejpfx Aiwjw * Maximum table load: up to 3000 kg The machine features the following technical equipment: Control system: Heidenhain TNC 620 Spindle speed: 10,000 rpm Tool holder: SK 40 High-pressure pump: 20 bar Tool magazine: 30 positions Preparation for a 4th axis The machine is located in Eschweiler.

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: DEK-1807003, working width: 320 mm, total width: 900 mm, input frequency: 50 Hz, input voltage: 380 V, total length: 3,500 mm, type of input current: three-phase, eisenkolb DEKO-2000 Curtain ironing table with preheated rotating surface and steam extraction Bwodpe Abar Rjfx Aiwow The ergonomic design of the ironing surface, angled at 6 degrees, with weightless suspension/guidance of the iron, prevents fatigue and RSI (Repetitive Strain Injury). Rotating, electrically thermostat-controlled, heated, and rotating ironing surface measuring 320 x 60 cm, with steam extraction and pedal control. Power consumption according to the manufacturer: 2,000 W The ironing surface can be moved forward or backward using a foot pedal, making it easy to transport an ironed curtain. Vacuum function for optimal steam ventilation and improved ironing results. Fabric trays at the front and rear to keep the curtain clean. Technical specifications: Dimensions: 350 x 90 cm Electrical: 380 V, 3-phase, 2000 W Inspection possible by appointment. Collection in 58239 Schwerte.

Condition: used, total width: 2,100 mm, total height: 2,100 mm, Year of manufacture: 2000 Colour: Blue Empty weight: 3.500 kg Dimensions (LxBxH): 370 x 210 x 210 cm - Details: - └ Description: Various repairs are needed - Year: 2000 - CE marking present: Yes - Serial number: 30728 - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Bottom - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Tool present: Yes - └ Spindle 3: Bodpez Tqznefx Aiwoww - - Spindle type: Left - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Tool present: Yes - └ Spindle 5: - - Spindle type: Top - - Tool present: Yes - └ Spindle 6: - - Spindle type: Bottom - - Tool present: Yes - Max. planing width [mm]: 260 - Min. planing height [mm]: 0 - Max. planing height [mm]: 140 - Feed table length [mm]: 860 - Feed roller diameter [mm]: 140 - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 140 - Feed speed: Manual - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 36 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 141 - Fuse [A]: 160 - Power [kW]: 65.0 - Transport dimensions: 3700mm x 2100mm x 2100mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2015, • ASYS INSIGNUM 2000 CO₂ laser with integrated rotating station • Year of manufacture: 2015 Bedpfx As Agfwqoiwjww • Max. marking area: 350 x 350 mm (without axis movement) • Printed circuit board formats: Min. 70 x 50 mm to Max. 460 x 460 mm • Board thickness: 0.8 mm to 3.0 mm (Permissible weight up to 2/3 kg) • Camera system: Integrated camera • Connection power: 230 V / 50 Hz / approx. 0.7 kW • Compressed air supply: 6 bar • Dimensions (approx.): 701 mm x 1,548 mm x 1,522 mm (LxWxH) • Incl. extraction system

Condition: excellent (used), Professional milling machine / shot blaster for floor preparation from the renowned Swiss manufacturer Blastrac / Früh. This machine is designed for milling, removal of coatings, adhesives, paint, epoxy resins, and for preparing concrete surfaces prior to further processing. The device is in good technical and visual condition. It features a robust industrial-grade build, equipped with a powerful ABB motor and a milling drum. It is ideal for both renovation and industrial tasks. Technical Data: • Manufacturer: Früh / Blastrac • Model: RT-2000 EL • Machine type: concrete scarifier / milling machine • Power supply: 230 V • Frequency: 50 Hz • Machine power: 1.85 kW • Motor: ABB Motors • Motor speed: 2800 rpm • Working capacitor: 50 µF / 400 V • Protection rating: IP55 • Machine number: 4122 000007 Applications: • Removal of coatings and paint • Concrete milling • Floor preparation Bedpjz Sm Amjfx Aiwoww • Removal of adhesives and resins • Renovation of industrial surfaces Condition: used, fully complete. The machine shows normal signs of wear consistent with use.

Condition: good (used), Brand: Videojet Bedpfx Aijyt Hmpjwoww Type: Inkjet Marking Machine Model: Excel 2000

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 3021600302, center height: 230 mm, center width: 2,000 mm, grinding diameter: 355 mm, controller model: Siemens 840 D, TECHNICAL DETAILS Center distance: 2,000 mm Center height: 230 mm Grinding diameter: max. 355 mm Z-axis speed: 0.01–15 m/min Z-axis resolution: 0.5 µm X-axis speed: 0.01–10 m/min X-axis resolution: 0.5 µm External grinding wheel, standard, outer diameter × width × bore: 500 × 80 × 203 mm Grinding wheel peripheral speed: 35 m/s Surface grinding wheel, standard, outer diameter × width × bore: 400 × 40 × 127 mm Drive power, external grinding spindle: 9 kW Speed, external grinding spindle, adjustable: 600–1,900 rpm Drive power, internal grinding spindle: 2.2 kW Speed, internal grinding spindle: max. 28,000 rpm Speed, workpiece spindle: 0–500 rpm Taper bore, workpiece spindle: MK 5 Taper bore, tailstock center: MK 5 Cylindricity adjustment: +4′ to −4′ MACHINE DETAILS CNC control: Siemens 840 D Bwedpfxo Agfzbj Aiwow Total connected power: 25 kW Operating voltage: 400 V Phases: 3 Mains frequency: 50 Hz Total weight: 10,000 kg Operating noise level: 70 dB(A) according to EN 31201

Condition: used, total length: 4,100 mm, total width: 1,900 mm, total height: 1,850 mm, Year of manufacture: 1997 Colour: Blue Empty weight: 5.000 kg Price: On request - Year: 1997 - Documentation available: Yes - CE marking present: Yes Bwjdpfx As Agwr Roiwsw - Serial number: 9712854F - Drive system: Teach-in - Power [kW]: 14.0 - Centre height [mm]: 275 - Swing over bed [mm]: 550 - Carriage turning diameter [mm]: 360 - Distance between centres [mm]: 2000 - Bed width [mm]: 360 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 180 - Max. spindle speed [rpm]: 2500 - Options: Fixed steady, Three-jaw chuck, Travelling steady, Quick-change tool post - Transport dimensions: 4100mm x 1900mm x 1850mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2013, operating hours: 51,438 h, functionality: fully functional, turning length: 2,000 mm, turning diameter: 630 mm, spindle motor power: 34 W, spindle speed (max.): 4,000 rpm, spindle bore: 102 mm, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 2,050 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 40 m/min, type of input current: AC, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 30 m/min, total height: 2,670 mm, total length: 7,601 mm, total width: 4,215 mm, spindle nose: 220h5, overall weight: 24,000 kg, Equipment: documentation/manual, Control system: Siemens 840D sl with ShopTurn Year of manufacture: 2013 Spindle hours: 16,310 Location: Germany Equipment: -Main spindle ISM 102 -Counter spindle ISM 102 -Milling spindle HSK63A 12,000 rpm -Eccentric turning and milling -Milling of gears using the involute method -Easy Tool Monitor for Siemens control system -Chuck flushing system, external -Chuck flushing system, counter spindle -Differential pressure monitoring for H-spindle -Differential pressure monitoring for C-spindle -Coolant supply through the counter spindle -Partially hollow chuck, Ø 104 mm -Tailstock function for the counter spindle -Rest support for rest 30-245 mm -Rest slide, NC-controlled -BFA 8/20/80 bar, 980 l, cooler -Hinged belt chip conveyor -Automatic sliding hood, electric -Tool measuring device Bodez Tc Tpjpfx Aiwsww -Chain magazine for 120 tools HSK63A -Signal light, 4-way -Cleaning of the safety glass -Coolant spray gun -Control cabinet lighting -Oil mist separator Including the following overhaul/repair measures: -General overhaul of main spindle S1 HSK 63 12,000 rpm -Replacement of safety glass -Replacement of hoses (pneumatics, cooling system, CNC)

Condition: good (used), Year of construction: 2001, functionality: fully functional, Lead screw and feed spindle lathe Manufacturer: Konventa Model: 500 x 2000 mm Year of manufacture: 2001 Center height: 250 mm Turning length: 2000 mm Rapid traverse 1 closed steady rest Bedpfo Ahkc Nex Aiwjww 1 open steady rest Lighting Tailstock, MK 5 The machine is still very accurate.

Condition: good (used), FKS PrintBind KB 2000 Book Binder This machine is 100% functional and ready to use. Manufactured by FKS Hamburg, Germany. Capable of binding books, brochures, pads, prescriptions, etc. A very handy machine, ideal for digital printing. The machine has a convenient base and a built-in compressor. Technical specifications: Bwjdoz Rk Hrjpfx Aiwow Maximum format: 320 x 310 mm Spine thickness: 60 mm Capacity: approx. 320 books/h Weight: 186 kg 230V power supply Material detection sensors Automatic cover detection and automatic cover clamp Spine milling Simple operation via LCD panel Adjustable cover clamping force Infinitely variable glue thickness adjustment Includes user manual and compressor.

Condition: used, Year of construction: 2006, Masterfill Filling Machine S 500 The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products. Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards. The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill S 500 integrates seamlessly into existing production lines. Key Features - High-precision volumetric filling system - Suitable for liquid and semi-viscous products - Hygienic stainless-steel construction - Easy-to-use control interface - Adjustable filling speed and volume - Low maintenance and easy cleaning - Compact and space-efficient design Applications - Milk and dairy products - Yogurt and desserts - Cream and sauces - Beverage and liquid food products Materfill S500 6 head fill while rise filler M2-AF Serial number 4716 YOM 2006 Filling capacity 2ml to 2000 ml The filler is a 6 head automatic filler, with the capacity to store 50 separate preset menus, Brief FDS • Controlled by Siemens S7 PLC via Mitsubishi Beijer HMI • Jars feed in vis constant stainless steel slat band • Jars indexed via program-controlled infeed and outfeed pneumatic gates. • Jars filled via positive pressure within 50 ltr holding tank (this could be changed easily to a constant positive pressure into manifold via modulating pump) • Volume controlled via Nixon BNO turbine flow meters communications with siemens high speed counter. • Liquid feeds into jar with rise during fill or above jar for fill time • Full SIP, CIP, and flush capability programs available Dico CapperSerial number 3/379Brief FDS  Capper with rotating starwheel  Will cap Square of round Jar/ Bottles (change parts included)  Jar enters, signals PEC starwheel turns 90⁰ under capping head Bjdpfxjywuczj Aiwsww  Capping lowers on cam, retracts on cam  Jar/ bottle clamp activated of adjustable cam onto 5/2 valve  Starwheel turns 90⁰ onto exit conveyor  Current capping head removable, for 40mm cap (no alternative head)  All systems work on cams and relays, no PLC  Motor runs on DOL for capping (clutch adjusted and variable speed gearbox)  Cam motor uses inverter. Guards with interlocked access doorway Required services.  3 Phase 32-amp electrical supply  7 Bar air pressure Main control panel Cap sorter and feederRNASRC-N 400-2LSerial no 00801Brief FDS  40mm cap sorter and feeder  Vibrating bowl agitates caps upwards  Air jets and cut outs sort caps placing in correct orientation  Cap chute allows smooth passage to dispensing head with some adjustment  Cap dispenser works on bottle/jar passing under and catching cap, this allows the retaining jaws to open and release cap  Side or over independent speed controlled wheel assists in cap leveling Required services.  240V electrical supply  3 Bar air pressure Filling volume: 25-2000 ml Controls: SIEMENS S7 via Mitsubishi H...

Condition: good (used), Year of construction: 2010, sheet width 2020 mm plate thickness 3.0 mm thickness at "Niro-steel" 2.0 mm bending angle max. 135 ° stroke of upper beam 250 mm Swing beam adjustment 80.0 mm Control POS 2000 back stop - adjustable ca. 1.000 mm total power requirement 6.0 kW weight of the machine ca. 3775 kg dimensions of the machine ca. 3850 x 2250 x 2250 mm Original price at the time: approx. 70.000 Machine from a maintenance workshop Special price upon request (!) Features: - Robust, electric-motor-driven CNC swivel bending machine - dynamic, high-performance drive motors - SCHRÃ?DER "POS 200" CNC control unit * touchscreen control panel * fast programming of individual parts * programming of bending sequences * Tool and bending program library * Graphical and numerical display - Swiveling control panel, front right - CNC electric-motor-driven material/backgauge Bsdpoz Icy Rofx Aiwoww * With rear sheet metal support surface (stainless steel) - CNC electric-motor-driven lower rail adjustment - 1x freely movable dual foot switch - Bending/insert tools * 1x upper cutting rail * 1x lower bending rail -- 10 mm * 1x lower bending rail -- 25 mm - User manual (PDF)

Year of construction: 2000, condition: good (used), Vitronics Soltec reflow oven, type: 6638 Quantis Pro Bwedpfx Aisq I Shaowow

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KUKA KR 240-2 2000 industrial robot, including control cabinet 57273 Bwsdpsz Rnnajfx Aiwew The KUKA KR 240-2 robot is a 6-axis robot arm with a payload of 240 kg and a reach of 2700 mm. Manufacturing applications include palletizing. Common applications for the KUKA KR 240-2 include: additive manufacturing, assembly, dispensing, deburring, material handling, palletizing, and remote TCP. Specifications: Brand: KUKA Model: KR 240-2 2000 Type: Robot arm Axes: 6 Payload: 240 kg Reach: 2700 mm Repeatability: 0.06 mm Weight: 1267 kg Serial number: 910452 Control cabinet: 57273 Year of manufacture: 02/2008 Used item – normal signs of wear. Further details, article numbers, and images available upon request. Two-week commissioning warranty. No further warranty. Spare parts are constantly available in stock. The robot is fully functional and can be inspected upon request. Free loading / ex works. The stated price is net. The legally required VAT of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on-site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries available upon request – please specify country, city, and postal code. Freight costs available upon request – please specify the delivery address.

Condition: good (used), Year of construction: 1999, operating hours: 52,324 h, functionality: fully functional, X working area max.: 1270 mm Y working area max.: 1270 mm Control: Bosch Type 3 Basic Bodpfxsz Rl T Ts Aiwjww Standard equipment: - Robust C-frame - Safety light barriers - Coordinate guide with integrated linear magazine - 2 clamping claws - Automatic tool changer - Automatic repositioning - Tool length compensation - Forming capability - Mono tool holder with 360° rotation for all tools - Programmable hold-down device - Multitool drive - Punch slug extraction - Brush tables - Part chute 200 x 200 mm, sorting of parts into 2 containers - NC-controlled, digital, maintenance-free three-phase drives - Network interface RJ34 - 3.5" floppy disk drive - TOPS 2000 graphical programming - Online diagnostics via modem - Operating manual + Vibration-damped installation + Multitool + Thread forming + Start post

Condition: not inspected (used), Year of construction: 2022, load capacity: 2,000 kg, Mobile Portal Crane ABUS LPK IF INTERESTED, FURTHER IDENTICAL CRANES ARE AVAILABLE! Year of Manufacture: 2022 Machine Number: 153-002730 Condition: Uninspected Delivery Terms: Free loading onto truck Location: 21493 Elmenhorst-Lanken Availability: Immediately - by arrangement Payment Terms: Prepayment - by bank transfer Internal No.: 174-2 Technical Data: Crane bridge / crossbeam: approx. 3,280 mm Crane bridge profile height: approx. 240 mm Length of longitudinal beams: approx. 4,600 mm Length of running/foot beams: approx. 1,980 mm Height of running/foot beams incl. rollers: approx. 400 mm Lifting Gear: ABUS Electric Chain Hoist Bwsdpfx Aszqfn Eeiwjw Type: GM 6 2000.3-2 Load capacity: 2,000 kg Lifting speed: 0.80 / 3.00 m/min Power supply: 400 V / 50 Hz Equipment: Electrically driven chain hoist / load hook (left/right) IF INTERESTED, FURTHER IDENTICAL CRANES ARE AVAILABLE! Scope of delivery: Existing documentation as shown in the images Dimensions & Weights: Installation dimensions L x W x H approx.: 3600 x 2000 x 5000 mm Transport dimensions L x W x H approx.: 4600 x 1500 x 1500 mm Weight approx.: 500 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional Notes: ►Upon request, we can offer transport to the destination. ►The quoted price is net, plus VAT. ►The goods are sold with the exclusion of any warranty. ►Technical data subject to change without notice. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: used, Year of construction: 2000, overall weight: 9,200 kg, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: safety light barrier, We offer this used TRUMPF Trumatic 2000 R punch machine, year of construction 2000. Maximum punching capacity: 180 kN Bedjz Ak Diopfx Aiwoww Type: 9110 Serial number: 700359 Year of manufacture: 2000 Mains supply voltage: 400 V Mains supply frequency: 50 Hz Connected load: 17 kVA Distribution voltage: 400 V Control voltage: 24 V DC Fuse rating: 3 x 35 A Air pressure: 7-14 bar Machine weight: 9200 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2014, operating hours: 60,720 h, machine/vehicle number: 227851, clamping force: 2,000 kN, screw diameter: 45 mm, clearance between the columns: 570 mm, injection weight: 291 g, mold height (min.): 250 mm, ejector force: 70,000 N, ejector stroke: 200 mm, MACHINE WITH DOCUMENTED PURCHASE EVALUATION I offer this used Arburg Allrounder 570 S 2000-800, manufactured in 05/2014, with Multilift Select (lateral) and protective housing. The redacted purchase evaluation is available as a separate PDF document. The previous owner placed great emphasis on the maintenance of the hydraulic system: Additional oil filtration operated around the clock to protect proportional and solenoid valves from contamination – ensuring reliable operation, high machine availability, and long-term value retention. TECHNICAL DATA Machine number: 227851 Type: hydraulic Clamping force: 2,000 kN / 200 t Bodo Ahzy Rjpfx Aiwoww Control system: Selogica Injection unit: 800 Screw diameter: 45 mm Shot weight: 291 g PS according to seller's form Tie bar spacing: 570 x 570 mm Platen dimensions: 790 x 790 mm Minimum tool height: 250 mm Opening stroke: 900 mm according to seller's form Ejection stroke / force: 200 mm / 70 kN Operating hours according to current seller's form: 60,720 h Automatic cycle hours according to current seller's form: 54,616 h 400 V, 3~, 50 Hz; Total connected load according to nameplate: 105 kW HANDLING AND EQUIPMENT Multilift Select (lateral), 15 kg load capacity, No. 604575 X/Y/Z: 900/1,000/1,600 mm B- and C-axis pneumatic 4 x vacuum; 4 x dual-acting grippers Customer-side inputs and outputs Protective housing 12 hot runner zones 2 core pulls and 1 blow function Interfaces for chiller and dryer Variable speed pump, confirmed as IE2 by the seller DOCUMENTED MACHINE CONDITION Technical information from the seller's form, machine photos, and email from 04.11.2026. According to the seller, the machine was demonstrated in operating temperature. Technical documentation is available, according to the seller. No wear measurement of the screw, check valve, and cylinder is available. Dryer, chiller, and other peripherals are not confirmed as part of the scope of supply. Price on request. I would be happy to discuss availability, inspection, as well as delivery and payment terms with you personally.

Condition: used, empty load weight: 4,600 kg, maximum load weight: 13,390 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2000, loading space length: 6,700 mm, loading space width: 2,500 mm, suspension: air, wheelbase: 5,130 mm, Year of construction: 2000, Height: 1.12 m Technically in good condition Bwodpfsw Srz Nox Aiwjw Year of manufacture: 2000

Condition: used, Year of construction: 2000, machine/vehicle number: 48457-16, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Mobile Höcker Polytechnik dust extraction unit for extracting wood chips and dry dust from woodworking machinery. The unit is equipped with a large filter bag, an 180-liter collection bag, and swivel casters for easy movement around the workshop. Technical specifications: Manufacturer: Höcker Polytechnik GmbH Type / group: Gr. 3 Motor power: 2.2 kW Power supply: 230/400 V, 50 Hz Motor speed: 2,800 rpm Bwedpfjz Dv T Ajx Aiwjw Airflow capacity: 2,460 m³/h Extraction connection diameter: 160 mm Filter area: 3 m² Collection capacity: 180 liters Year of manufacture: 2000 Article number: 90303 Internal reference number: 48457-16 Condition: used, with normal signs of wear and tear and previous operation. The actual condition and scope of delivery are shown in the photographs. The machine can be inspected by prior appointment. Location: Gātciems, Latvia. We can assist with loading and arrange transportation within Latvia or to other European countries.

Condition: used, total length: 2,450 mm, total width: 1,900 mm, total height: 2,140 mm, Year of manufacture: 2020 Colour: Grey Weight: 5.500 kg - Year: 2020 - Documentation available: Yes - CE marking present: Yes - Drive system: CNC - Control system brand: Delem Bwedpfx Aszr Inwoiwew - Control system type: DA-41s - Power [kW]: 4.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 40 - Max. working width [mm]: 2000 - Column gap [mm]: 1800 - Throat depth [mm]: 200 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 100 - Crowning system: None - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 2450mm x 1900mm x 2140mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, This listing is for a Applied Biosystems API 2000 MDS SCIEX LC/MS/MS This system was previosly paired with the Shimadzu SIL-HIT HPLC system. It has been removed from the lab while in good working condition, it was well serviced and is still in very good condition. Bsdpfjxzhpmsx Aiwjww Equipment can be serviced/renovated/refurbished on request at extra cost.